Zreport print in condense mode

Hi Guru,
I'm trying to print my Zreport (i.e. classic view) using zdevice type, it prints in condense mode where as the same report print in development its print without condense. I'm check all setting its same on both server i.e. development and production. Help me.
Gokul
Edited by: Gokul Borse on Apr 10, 2011 1:57 PM

Hi Gokul Borse      
For Lable printing better u can use the Sap Sprint method S,
1. First configure the printer any one of the Pc or Server( windows os). in that just install the Saps-print server which is available in the service market place.
2. In SAP T code SPAD setting Device type :EPESCP,
                                               Host Spool Access method - S Print Using SAP Protocol
                                                Host Printer name - ( In which pc running Sap S print server one that printer name)
                                             Destination host - (Ip address or DNS Name for the PC or Server in which the SAP S print server running)
Try this
regards
Sriram

Similar Messages

  • Condensed mode printing  in graphic mode printers

    Dear sir.
    I am using Reports-6i as developer tool.
    while developing reports i use to run in character mode,
    Before generating the report i will pass prt file, and also before printing code
    should be condensed.
    The report get printer in dot matrix printer as condensed mode ,
    What i need is the same should print in HP desk jet or any graphic mode printers
    by taking care of software.
    please guide in this regard.
    mathapati.

    Please try the following:
    1) in printer settings, in advanced tab "print directly to the printer" must be selected.
    Hope this helps.
    Bob

  • How to print the script in condensed mode

    Hi to all,
    Pls help me.
    How to print the script in condensed mode and particular window only print in the condensed mode.

    Hi,
    Hi
    It will remove the blank spaces in front of the variable
    and if you use the extension NO-GAPS
    It will remove all the blank spaces in the variable field.
    DATA: ws_val1 type char12.
    ws_val1 = ' 100 123'.
    Condense ws_val1.
    Write / ws_val1.
    Condense ws_val1 no-gaps.
    write / ws_val1.
    It will give output as
    100 123
    100123
    The CONDENSE statement deletes redundant spaces from a string:
    CONDENSE c NO-GAPS.
    This statement removes any leading blanks in the field c and replaces other sequences of blanks by exactly one blank. The result is a left-justified sequence of words, each separated by one blank. If the addition NO-GAPS is specified, all blanks are removed.
    Please check this link for sample code.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb33e6358411d1829f0000e829fbfe/content.htm
    Regards,
    Raj.

  • Matrix report in condensed mode in dot matrix printer

    How can we print a 10g matrix report in condensed mode in dot matrix printer? The dot matrix printer is a Epson LQ 1070+ printer. I am tried using a printer definition file and given printer codes in the report. The printing is not taking place in condensed mode. This method however is working for other reports. Could any one help?
    Regards,
    Jayram
    Edited by: jayramkumars on Feb 6, 2009 12:11 AM

    Hi all,
    This is to inform that I have myself found the solution. It is possible to print matrix report in condensed mode. The method for printing is same as for any other report. The mistake I made was not checking whether the .prt file is getting referred correctly. The DESFORMAT system parameter was getting populated through the calling form. By referring to the correct .prt file the problem got fixed.
    Regards,
    Jayram

  • Report in Condensed Mode

    I want to print report somewhere in condensed and somewhere in bigger font. I also would like to control the page setup and printer (form feed, eject etc) programatically. I haev seen the prt file but unable to use it. Can someone send me a sample report file for my reference. Please mail me to [email protected]
    Thank you,
    Dwijesh, India

    Hi all,
    This is to inform that I have myself found the solution. It is possible to print matrix report in condensed mode. The method for printing is same as for any other report. The mistake I made was not checking whether the .prt file is getting referred correctly. The DESFORMAT system parameter was getting populated through the calling form. By referring to the correct .prt file the problem got fixed.
    Regards,
    Jayram

  • Print in text mode to detect escape sequences

    Hello,
    We have got an issu, on our .NET print program using Crystal 12 SP3. The issue has concequences on :
    - Barcode print on matrix printer
    - Barcode print on thermal printer
    - Other commands send to a FAX printer driver
    Using the SDK, the print driver receives print data in graphical print mode, but it has to be text mode for the printer driver to detect the correct escape sequences. The escapes sequences are used by the driver to switch the font or receive a command.
    Is there a way to force the print in text mode ?
    The same report printed from Crystal Reports 2008 SP 3 "works", but not from the .NET sdk.
    Here is a little example. We made a simple Report, containing 2 simple Text Objects :
    Code Barres $ [ /
    +$$;111;6;1;1;0;2 z +
    $$?0h0123456789$$?0/
    We redirected the print driver spool in a file. Here are the outputs :
    Printed from Crystal Report 2008 :
    [0;4 r+<[3;031w[3;032w[7s2CH
    x[1;2xF5-
    JÃ$Code Barres $ [ /
    J-$$$;111;6;1;1;0;2 z
    J$$$?0h0123456789$$?0/@[0;4 r
    Printed from .Net application using Crystal Report 2008 SDK :
    [0;4 r+<[3;031w[3;032w[7s2CH
    x
    JÅ$*'úø u20AC u20AC u20AC u20AC u20AC<|u201Au20ACu20ACu20ACu20ACu20ACu20ACu201A||u201Au20ACu20ACu20ACu20ACu20ACA@u201Aÿu20ACu20ACu20AC|u2019u20ACu20ACu20ACu20ACu20ACu20ACu2018r u20AC u20AC?ÿu20AC @u20AC @u20AC @u20AC @u20AC @u20AC @u20AC u20AC!u20AC u20AC u20AC u20AC u20AC!"ÿu20ACu20ACu20ACu20ACu20ACu20ACÿu20ACu20ACu20ACu20ACu20ACu20ACu20ACu20ACu20ACu20ACÿu20ACu20ACu20ACu20ACu20ACu20ACu20AC|u2019u20ACu20ACu20ACu20ACu20ACu20ACu2018ru20ACÁ! u20AC u20AC u20AC u20AC u20ACŽu201A u201A u0192ààu201A BBD8ÿð@@@`u20AC`u20AC0À
    J-*'7u201A u201A u0192ààu201A BBD8u201A u201A u0192ààu201A BBD8`àu2021u20ACu2021u201Eu20ACu20AC u20AC u20AC u20ACÿu20ACu20ACu20ACu20ACu20ACu20AC u20AC u20AC u20ACÿu20ACu20ACu20ACu20ACu20ACu20AC u20AC u20AC u20ACÿu20ACu20ACu20ACu20ACu20AC`àu2021u20ACu2021u201Eu20ACø>A u20ACu20AC!u20ACAu20ACAu20ACA@Ã@<`àu2021u20ACu2021u201Eu20ACu20AC u20AC u20AC u20ACÿu20ACu20ACu20ACu20ACu20AC`àu2021u20ACu2021u201Eu20ACu20AC u20AC u20AC u20ACÿu20ACu20ACu20ACu20ACu20AC`àu2021u20ACu2021u201Eu20ACü @u20AC@u20AC@u20AC ø`àu2021u20ACu2021u201Eu20ACu20ACu20AC u20AC@u20AC@u20AC@ u20AC@@u20AC@u20ACu20AC!u20ACu20ACu20ACu20ACu20ACu20ACu20AC u20AC@u20ACu20ACu20ACu20ACu20AC
    J*'Tu201A u201A u0192ààu201A BBD8u201A u201A u0192ààu201A BBD8  u20AC 1u20AC Au20AC Au20ACu20ACü @u20AC@u20AC@u20AC ø@u20AC@u20ACÿu20ACu20ACu20ACu20ACu20ACu20ACÿu20ACu20ACu20ACü @u20AC@u20AC@u20AC øu20AC u20AC u20AC u20ACÿu20ACu20ACu20ACu20ACu20ACu20ACu20AC u20AC@u20AC@u20AC@ u20AC@@u20AC@u20ACu20AC!u20ACu20AC u20AC@u20AC@u20ACu20AC@u20ACu20AC@u20ACu20AC!A#xu02C6<u20AC@u20AC@u20ACÿu20ACu20ACu20AC@Au20ACAu20ACAu20ACAu20ACAu0192|ø>A u20ACu20AC!u20ACAu20ACAu20ACA@Ã@<p@@@@@u20AC@8AÀNp>!A@u20ACu20AC@u20ACu20AC@u20ACu20AC@u20ACu20AC@u20ACu20AC!A>u20ACu20AC @u20AC@ u20AC@ u20AC@ u20AC@! Bu0152ðu201A u201A u0192ààu201A BBD8u201A u201A u0192ààu201A BBD8  u20AC 1u20AC Au20AC Au20ACu20ACü @u20AC@u20AC@u20AC ø`u20AC`u20AC0À@[0;4 r
    As you can see above, the characters contained in the report are sent "as this" in the print driver from Crystal Reports 2008. But the pixels represention of the characters are sent from the .Net SDK.

    Hello,
    thank you for your answer.
    I forgot to add the 2008 com+ API output, that is exactly the same as Crystal Report 2008.
    - From Crystal Reports 2008 : WORKS
    - From a program using the 2008 com+ Runtime API : WORKS
    - From a program using the 2008 .Net Runtime API : DON'T WORK
    You wrote that all the runtime print engine sends to the printer is essentially a picture. But It do send text using the com+ API.
    Should I understand : The .Net runtime print engine can't send text ?

  • SmartForm Last Page to be printed in Duplex mode

    I have a requirement in PO printout where the Last page containing the Terms and Condition to be printed on Duplex mode.
    Suppose the PO is taking 4 pages without Terms and condition. then the TC must be printed on the backside of the 4th page.
    My smartform contains 3 Pages  'First', 'Next' and 'TC'.
    If i set page 'Next' duplex then the 3rd page is getting printed on the back side of the 2nd page.
    So how can i Print the TC page on the backside of the Last Page.
    Thanks & Regards
    Sukriti.

    Hi All,
       I know this is a very old post. Currently I am also facing same issue. Does anybody has solution for it. ?
    Regards,
    Leona

  • Configurations done at SAP gui level to print in duplex mode

    Hi Gurus,
    We had a requirement to convert a printer to duplex mode, we changed all the settings at SAP level( kept duplex mode in printing mode and changed device type to SWAN (as post and pre2 device types are not available) ). But still we are not able to get the desired duplex mode.
    Is there are any further settings or something done in server?
    Is there any settings done at SAP gui to get the print as duplex from a report?
    Thanks in advance....
    Gopal.vvs

    Hi,
    Check the below links
    duplex printing configuration in SAP
    http://www.sap-basis-abap.com/sapab035.htm
    Hope it helps you.
    Rgds,
    Suman

  • Print in duplex mode

    Hi experts,
    I need to print on duplex mode ABAP list documents. My printer works with  HPLJ4 PCL5 driver  (ricoh Aficio 3045) on SAP but when i try to print on duplex mode (the printer properties are set to print on duplex by default) i can't get it.
    I don't use Smart forms. On SPAD i have created a new device, the acces metod is F: Printing on front end computer,  the device type copy of original HPLJ4 to test it, but i only can get paper printed simplex.
    Please, Can you help me?
    Thanks in advance

    Hi,
    The duplex settings in SPAD only work for device types that have the special list driver, Try using device type HPLJ4000 instead of HPLJ4 and create a new spool.
    Regards,
    Aidan

  • I use an Epson Stylus Office BX320FW printer with my IMac.  Since upgrading OSX, I have lost the ability to print and scan.  I have downloaded printer drivers from both Epson and Apple.  I am using the printer in wifi mode but can not get it print or scan

    Hi Everybody,
    I use an Epson Stylus Office BX320FW printer with my IMac.  Since upgrading OSX, I have lost the ability to print and scan.  I have downloaded printer drivers from both Epson and Apple.  I am using the printer in wifi mode but can not get it print or scan.  How do I uninstall the Epson software and start all over again?
    nickel_man_65

    Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
    Someone on this forum suggested, that USB3 may interfere with the magic mouse.
    I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
    Thanks for the advice, Bee
    Cheers, Gerd

  • Print in Character Mode on Dot Matrix Printer

    Dear All,
    When we print any reports from SAP to Dox Matrix printers it comes in graphic mode. So it will take too much time to print and  print is also not readable.
    Same I want to print in Character mode (Simole reports where graphics are not involved e.g. Financial Ledger, Cash Voucher etc.).
    Whether it's required to setup at printer level or at SAP.
    Thanks

    Hello,
    I think this required to setup at printer level.
    Regards,
    David

  • After upgrading to mountain lion my calendar does not print in weekly mode anymore

    after upgrading to mountain lion my calendar does not print in weekly mode anymore

    I'm having the same problem with both my Vivotek wired network camera and Panasonic wireless network cameras. At first I thought this was an issue with the video framework in Mountain Lion, but if Firefox is working (I haven't tried it yet), it sounds like it may be an objective-c video library that has been changed. It's possible Firefox is using an objective-c interface that calls an objective-c function that isn't called by Safari or IP Camera Viewer, etc., (possibly a function that is on its way to be deprecated) or Firefox could use it's own library that directly calls the video framework.
    Could be the Mountain Lion objective-c framework has a buffering issue.
    Since this is occuring in both 3rd party software and Apple software, it sounds like it's an Apple issue. 3rd party applications typically utilize the Apple Developer objective-c frameworks to access video frameworks/libraries (for example, MJPEG). Thus, contacting 3rd party developers may not solve the situation (unless they can figure out a temporary bandaid--possibly figuring out the video framework call that Firefox uses and patching their software to do the same (not a simple task), but could still provide more feedback to Apple via their developer status.
    Has anyone attempted to record from their cameras via iMovie or Final Cut Pro X HD? I will try mine later tonight to see if it records the hanging. If it does, then it's looking more and more like Apple's the culprit.
    My suggestion is for everyone to file a bug report via http://www.apple.com/feedback/macosx.html

  • How do I print in draft mode on Epson Workforce 3540

    I just bought and set up an Epson Workforce all in one printer.  Everything is working fine, except that I can't get it to print in draft mode.
    I've tried a few different applications and all are the same.  When I go to print, I get a window that includes a print quality slider at the bottom that includes three settings: draft, normal, and best.  The word "draft" is grayed-out.  If I try to drag the slider to it, it snaps back to normal in the middle.
    I looked in the printer's manual, and it says draft mode can only be selected with "plain paper" selected.  But, even when I have plain paper selected, I cannot choose draft quality.  In fact, it seems no matter what I try I cannot choose draft quality.
    The printer's owner's manual, it also shows some printer dialog windows that I don't get (I think I did get them with the Epson I just replaced, though).
    Can anyone tell me how I can select draft print quality, and why I'm having so many problems doing so?  Maybe it's to be expected that the Epson isn't letting me select the print mode quality that would save me the most ink.
    I'm attaching a screen capture of what I see when I try to print.  It is the first image.
    I'm also attaching a couple of screen captures from the printer's owner's manual section on Mac printing.  These are the printer dialog windows I don't see when I try to print.
    What I see when I try to print (note that "Draft" is grayed-out on the quality slider):
    These are what the printer's manual seems to suggest I should see (and what I think I did see with my last Epson printer that I just replaced):
    And:

    Based on your screen captures I believe you may have selected Apple's AirPrint driver rather than the Epson driver. This can happen if you add the printer by selecting it from the small pop-up window that appears with a heading of Nearby Printers after you click the plus button in the Print & Scan preference pane.
    To confirm which printer driver you are using, open the Print & Scan preference pane and select the Epson in the Printers colum. The right pane will give some details about the printer. If there is mention of AirPrint in the printer Name or Kind, then this will be the issue. The fix would be to remove this printer from Print & Scan and add again. But this time, don't select the Epson from the Nearby Printers pop-up. Instead, click on Add Printer Or Scanner from this pop-up window and from the next Default Add printer window, select the Epson in the list and ensure you select the Epson driver in the Use menu rather than the AirPrint driver.

  • Can't print from XP mode unless it's attached to the VM

    I've followed the insructions here:
    http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/how-do-i-install-a-printer-in-xp-mode/9dc7f464-2bea-42d1-9c45-dea8e039ecd5
    I have a Windows 7 Professional machine that our building management guy uses.  The software our system uses has not yet been updated to a Windows 7 compatible version so I've set up XP mode on his machine, installing the software in that VM.
    He is using an HP LaserJet 1300 printer connected via USB.  I've followed the instructions at the link above, however after removing the USB printer from the VM (putting it in Shared mode) and restarting the VM I can no longer print to the printer.  I
    don't believe it's a driver issue as if I reattach the printer to the VM I can print fine (but Windows 7 can't).  If I move it back to Shared status then Windows 7 can print to it but the XP Mode VM can't.  Is there a step I'm missing somewhere?
    Thanks in advance.

    Hi,
    As I know, if you have USB based printer, you can install driver inside VM and use it directly. If your printer is available to Windows 7, it will be shared automatically
    I have noticed that some USB devices just don't work well from XP mode if the printer driver is not installed correctly. If your guest operating system is Windows XP, you must manually install the printer driver for each printer.
    Please install the printer driver in XP mode.
    Furthermore, you can refer this link to configure a network printer for a virtual machine.
    Scenario 3: Print from a virtual machine.
    http://technet.microsoft.com/en-us/library/dd744684(WS.10).aspx
    Hope it helps.
    Regards,
    Blair Deng
    Blair Deng
    TechNet Community Support

  • How do I set my P3005 printer to print in "Draft" mode?

    How do I set my HP Laserjet P3005 to print in "Draft" mode. There doesn't seem to be an option for this in preferences or anywhere else I can find.

    Hi buretax,
    were they using the same printer?
    Have you tried uninstalling the printer and using the current software from this link.
    http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=1846089...
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

Maybe you are looking for