ZS 2 not working, all I get is stat
I just bought an Audigy ZS 2 card and it isn't working at all.
I disabled my on board sound, uninstalled my onboard sound cards drivers etc (Nvidia 4 stuff) put the new card in, cancelled my windows installation, put in the CD, installed drivers, updated drivers online.
So I really don't know why it wouldn't work. All that comes out of the speakers is static and fuzzy noises. When I play any music if I turn up my speakers to full volume I can sort of hear it playing under all the static.
Anyone have any ideas?
Hi Mike, no I have analog speakers Klipsch THx 5. speakers. If you go into THX console it will show you how to connect the speakers depending on you configuration. Just choose Speaker Selection and the graphic will change to reflect your configuration.
hopes this helps, LmK
AL
Similar Messages
-
I recently moved all my logic audio sessions to a back up hard disk. Also updated to Loin OSX. My Stylus RMX is not working. I get a message Missing Element on Part 1...Currently not installed on their computer or has been moved to a different folder. Any help out there?
Hi
Sounds like you may have moved the RMX library folder?
Is RMX fully updated (for Lion)?
Check your hard drives for a file called SAGE:
It (or an alias of it) is normally found in the <USER>:Library:Application Support:Spectrasonics.
Note that on Lion, the <User> Library is 'hidden'... quickest way to get there is to hold down Option (Alt) whilst using the Finder:Go menu
CCT -
Has anybody experienced the iPhone off switch not working all the time.
I have an iPhone 5, it's about 16 months old and it has experienced an annoying issue. The off button does not work all the time, sometimes I have to press it multiple times and other times it just works. The worst case is when it does not work at all, very frustrating. I didn't expect this type of issue for a phone that is not even a year and a half old.
I did some searching on the internet and there are 2 schools of thought, the first is that this is a hardware fault and Apple know about it but won't admit it because it would cost them too much to repair/replace phones with the issue. The second school of thought is that it is a software issue and a backup/reset/restore will fix it; I tried doing this but it did not resolve the issue.
Further digging seemed to suggest that it was really a hardware fault and the only option was to get a refurb from Apple for a ton of money, not cool.
Anyway, if anyone has any more information that could help me resolve this issue I would greatly appreciate it.
//*eggbox23@diesel vdub, thanks for your suggestion, I setup an appointment with the Genius Bar and found out in about 5 minutes that everything I have read up on so far is true.
Firstly the technician admitted that there is a sporadic fault on the iPhone 4s and iPhone 5 switches, something to do with the design of the switch that included a rubber element that rolls up (whatever that means) and causes the switch to fail. He then indicated that the iPhone 5s does not have the issue because the switch has been completely redesigned.
Since I was stupid enough to not take out the extended warranty the only options he gave me were to purchase a new phone or to get a refurb for $269, not cool. Why would anyone think that a phone would not work correctly for 2 whole years when the phone only cost about $600!
Since I have about 7-8 months left on my phone contract I am not prepared to pay for either option. I find it amazing that a phone can develop this type of issue in such a short time and then expect the customer to pay for their failures. Apple supposedly sells a very high quality product for a very high price, looks like they have taken a step back from this philosophy.
I am disappointed in the options that he gave me (I don't blame the technician) but I suppose I expected more from Apple in terms of quality and service.
//*eggbox23 -
Iphoto stopped working,all i get now is spinning beach ball of death.help!
iphoto stopped working,all i get know is spinning beach ball of death.please help.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
Help, do not work all the push notifications for iphone 4 (A1332) after the ios 7
Help, do not work all the push notifications for iphone 4 (A1332) after the ios 7
I have the exact same problem you have? I can occasionally getpushnotification, but only once a day fore facebook. For twitter, I get nothing and newer got. Other programs never got any notification att all.Push notification is on both under notification center and the respective programs.I have iOS 5.0.1 on iPhone 4S.
-
My mail is not working I keep getting an error message??
"Mf message error domain error 1032"Thank you! I forgot that all I have to do is reset iPad n it will ix most problems. Someone posted that message and it worked for me! :D
-
hi, my itunes will not work. I get a message saying it is out of date. But I have uninstalled and reinstalled itunes and I get the same message?
When uninstalling iTunes on your windows computer, there is a specific way it must be done in order to completely uninstall all components of the software. Ensure you follow the article for your correct OS.
Did you do this when uninstalling??
Windows XP - http://support.apple.com/kb/HT1925.
Windows Vista or Windows 7 - http://support.apple.com/kb/HT1923. -
I upgraded from leopard to lion and my Epson printer will not work. I get a error message comunication error. What can Ido to fix this I bought a new USB cord and it did no good.
I suddenly had the same thing happen. I've had my new iMac for 3 months and at first my Epson Artisan 50 worked okay then yesterday I started getting the same error message other people on this support site have gotten. I tried ALL the advice given (deleating the Epson files from the library folder, etc. reinstalling older software) and nothing worked. With the newest iMac (and operating system) you cannot pick and choose which version of Epson software you want. You must use the 10.8 version or it simply will not open when you've downloaded it. Finally I found the comment above by den.thed and tried the OS X Mountain Lion: Reset the printing system suggested. As much as I hated to lose all my printing presets that took a lot of expiermentation to set up, I was desperate. I tried it and it worked. Now I just have to consult my old computer and try to recreate all my printing set ups. So to others with Epson / Apple 10.8 issues this may help when everything else fails. Thanks den.thed for your advice.
-
2011 Macbook pro safari will not open & all i get is a spinning wheel
I updated my computer and ever since, my safari will not load. all I get is a color spinning wheel. Other apps will not open either. I have done internet recovery, and started in safe mode. I do not know what else to do. I can not get online to redownload since safari doesn't work. I can not even reset safari. please any help appreciated
There are several possible causes for this issue. Please take each of the following steps that you haven't already tried, testing after each one, until it's resolved. Back up all data before making any changes.
Step 1
Follow the directions in this support article.
Step 2
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select the iCloud keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain.
Step 3
Open the iCloud preference pane and uncheck the Keychain box. You'll be prompted to delete the local iCloud keychain. Confirm. Then re-check the box. Follow one of the procedures described in this support article to set up iCloud Keychain on an additional device.
Step 4
Open the Keychains folder as in Step 1. There should be a file in that folder with the name "login.keychain". If there is also a file iwith the name "login_renamed_1.keychain", then please do as follows:
☞ Rename login.keychain to "login-old.keychain".
☞ Rename login_renamed_1.keychain to "login.keychain".
You can then close the folder.
Delete the login keychain from the keychain list in Keychain Access. Choose
Delete References
when prompted, not Delete References & Files.
Select
File ▹ Add Keychain...
from the menu bar. Add back the file now named "login.keychain". If any of your needed keychain items are missing from it, also add back the file now named "login-old.keychain". I suggest you transfer any needed items from that keychain to the login keychain, then delete it. The transfers are made by drag-and-drop in Keychain Access. You'll need to enter your password for each item transferred.
Run Keychain First Aid again. Quit Keychain Access. -
Short key for copy does not work all the time now.
After I have installed the latest OSX - Yosemite, my short key for copy does not work all the time. It is infrequent how it works. I'm using the same keyboard that I have always used, my wireless logitech keyboard for mac. Please help.
I've plugged in my default mac keyboard and the short key copy still does not work.
-
A/R Invoice linked object not working all the time
I have a LinkedButton that is set to SAPbouiCOM.BoLinkedObject.lf_Invoice. When the selected A/R Invoice has a Document Type of Service the link works. When the selected A/R Invoice has a Document Type of Items the link does not work and I get the following error:
"No matching records found 'A/R Invoice' (ODBC -2028)"
I there another property that I should be setting? I could not find anything.Hi,
I've added a code sample that works fine for me.
add this code to a simple vb project with the correct references....
1. Enter a number of the Invoice you want
2. click on the second EditText to set the linkedButton
3. click the LinkedButton
<i>Public WithEvents m_App As SAPbouiCOM.Application
Private Sub Class_Initialize()
Dim oForm As SAPbouiCOM.Form
Dim oDBDS As SAPbouiCOM.DBDataSource
Dim oItem As SAPbouiCOM.Item
Dim oLB As SAPbouiCOM.LinkedButton
Dim oST As SAPbouiCOM.StaticText
Dim oET As SAPbouiCOM.EditText
Set m_App = getCurrentApplication()
' m_App.MessageBox "You have COM UI connection"
'form
Set oForm = m_App.Forms.Add("UUID")
oForm.Height = 150
oForm.Width = 400
oForm.Top = 100
oForm.Left = 400
Set oDBDS = oForm.DataSources.DBDataSources.Add("OINV")
'Edittext
Set oItem = oForm.Items.Add("EditT", it_EDIT)
oItem.Left = 200
oItem.Width = 40
oItem.Top = 50
oItem.Height = 15
Set oET = oItem.Specific
Call oET.DataBind.SetBound(True, "OINV", "DocNum")
'static
Set oItem = oForm.Items.Add("StaticT", it_STATIC)
oItem.Left = 50
oItem.Width = 100
oItem.Top = 50
oItem.Height = 15
oItem.LinkTo = "EditT"
Set oST = oItem.Specific
oST.Caption = "Business Partner Code"
Set oItem = oForm.Items.Add("EditT2", it_EDIT)
oItem.Left = 200
oItem.Width = 40
oItem.Top = 80
oItem.Height = 15
Set oET = oItem.Specific
Call oET.DataBind.SetBound(True, "OINV", "DocNum")
Set oItem = oForm.Items.Add("StaticT2", it_STATIC)
oItem.Left = 50
oItem.Width = 100
oItem.Top = 80
oItem.Height = 15
oItem.LinkTo = "EditT2"
Set oST = oItem.Specific
oST.Caption = "Business Partner Decs"
'linked button
Set oItem = oForm.Items.Add("Linked", it_LINKED_BUTTON)
oItem.Left = 180
oItem.Top = 50
oItem.LinkTo = "EditT"
Set oLB = oItem.Specific
oLB.LinkedObject = lf_Invoice
oForm.Visible = True
End Sub</i>
Regards,
Yaniv G.
SDK Consultant,
SAP Manage Israel. -
I got new Apple TV 10 days back,its not asking for the WIFI password.Home sharing is not working,i am getting Error while streaming videos from Youtube.
I can only see pics and video saved in my iphone. No other options are working.The worst part is that its not asking wifi passoword.
Not able to connect istores and itunes.
I cannot do software update. Can anyone help in this content?Thanks Brian- I am not connecting it with iphone teethering. I am using it with my DSL wifi.
I am using it with ethernet cable then its working fine.If i am trying to use it with WIFI then its giving error.
I tried using Netwrok testing but its giving same error. -
I had to erase my hard drive and then reinstall everything back from my passport external hard drive. Now my iPhoto edit is not working. I get a blank screen when I want to edit. The photos show up in the library but I cannot edit them. Help?
There are several possible causes for the Black Screen issue
*1. Permissions in the Library* : Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
*2. Minor Database corruption*: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
*3. A Damaged Photo*: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
*4. A corrupted iPhoto Cache*: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
*5. A corrupted preference file*: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Regards
TD -
Hello, my iphone 5s fell, thereafter i tried taking a picture, the camera app just shows a black screen and hangs, the front camera works on other apps (such as facetime and skype) but the rear camera is not working, all other apps work perfectly well, how do i resolve this
Double tap Home button and delete Camera app from multitask-list.
Do a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
If problem persist, make an appointment with genius bar for evaluation. -
i had downloaded Mountain OX and installed it on my macbook air. The notes app is now not working. I get the following message
"Terminating app due to uncaught exception 'MFSQLiteException', reason: 'checking for existence of object'
abort() called
terminate called throwing an exception"
Can someone help me with solving the problem.i had downloaded Mountain OX and installed it on my macbook air. The notes app is now not working. I get the following message
"Terminating app due to uncaught exception 'MFSQLiteException', reason: 'checking for existence of object'
abort() called
terminate called throwing an exception"
Can someone help me with solving the problem.
Maybe you are looking for
-
How can we clone the Oracle database in new Oracle Home
Hi, I would like to clone oracle database into new oracle home. How can we set it using OEM. I am using 10g grid control. Target db is on solaris Thanks Naveen
-
Can anyone please help me on this issue "What to do when my iPhone is asking for password of old apple I.D. when I don't have it and have created a new applie i.d."??
-
I have an older MacBook Pro (2007) and my screen went blank (gray). I have tried restarting the computer and I also went through the AHT trouble shooting that was recommended on the Support site. I havent had any luck with getting anything
-
How to run forms6i on Unix Machine
Hi all, I have just migrated a form4.5 to form6i. We have character mode application. Can anyone give me some idea how to run form6i on unix machine. Is it the same way we run form4.5(f45gen xyz.fmb $Path) or bit different Thanks regds Lasily Thomas
-
CSS Disjointed Text Rollovers help?
Hi All I am new to the site and have a question to ask, I have been playing around with the demo created by Nancy O, for css disjointed text rollover. What i would like to find out is, once i have created the rollover and i hover over it, the text in