Zsh can't create /bin/zsh

Hello,
I have installed zsh, everything went smoothly. but in the end, once installation finished, there is an error message:
warning: warning given when extracting bin/zsh (Can't create '/bin/zsh')
warning: warning given when extracting bin/zsh-5.0.0 (Can't create '/bin/zsh-5.0.0')
I checked it out by typing 'zsh'. Annoying "command not found" appears...
Do you have a solution?

Hi
The transaction form createing the template of the bins and subsequently creating the bins is config.
I get round this by doing a recording of LS01N in LSMW and then  using this to create my bins in ALL clienst by exporting and importing my LSMW
This also means that I can create any bins with any numbering sequece in one spreadsheet and load them all in one
In one of my recent projects I used this method to create 80,000+ bins in approx 30 minutes
Of course you need to know how to create the LSMW but a developer may be able to help you as it is too long to explain in this forum
I hope that this helps
Frenchy

Similar Messages

  • Can't create bin automatically in the testing server

    Dear Gurus,
    I am having this problem:
    In the server for configuration, I create new warehouse and do all the settings, then when I run SPRO > IMG or use t-code LS10, I can test to create storage bins automatically successfully.
    However, in the server for testing, after transporting all the settings for new warehouse, I use LS10 to create storage bins (since we can't transport master data), but the system (in testing server) says that I am not allowed to make (configuration) modification. The button "Create Bins" therefore gray out.
    Question:
    LS10 supposed to be a transaction to create master data. How come the testing server treat it as a configuration and not allow me to create bins automatically? Is this the error from MM side or Basis side (my profile is SAP_ALL)?
    We don't want to create manually since there are  thousands of bins, also we don't want to create an excel file and upload using LSMW because we already have formula and just want to create bins automatically.
    Please advise. Thanks.
    Trang

    Hi
    The transaction form createing the template of the bins and subsequently creating the bins is config.
    I get round this by doing a recording of LS01N in LSMW and then  using this to create my bins in ALL clienst by exporting and importing my LSMW
    This also means that I can create any bins with any numbering sequece in one spreadsheet and load them all in one
    In one of my recent projects I used this method to create 80,000+ bins in approx 30 minutes
    Of course you need to know how to create the LSMW but a developer may be able to help you as it is too long to explain in this forum
    I hope that this helps
    Frenchy

  • Can I export Bins/folders created in Premiere Pro CS6 to desktop?

    Recently I've started a slideshow project in Premire Pro. I organized all the images in Premiere by bins and started the project, although another software (ProShow Producer 5) have come to my attention, and I would like to continue the project in ProShow. Though my bins are organized inside Premiere and it would take me hours to go into the folders and pick out the correct photos again for the new project. My question is, can I export Bins/folders created in Premire to my computer? I know that the folders created in Premire are not real, though is there any pissiblity to duplicate the photos and place them into the bins/folders indicated in Premire? That way I can have all the folders ogranized and ready without the need to do it all again.
    Are there any plugins that convert Premire bins into physical files?
    Any help would be appriciated.
    Thank you.

    Sorry, but as Ann says, they are but mere links.
    Which is why I generally arrange my clips and other assets into folders on my hard drive before I import them into Premiere Pro. First of all it is faster to import them and second it is faster to archive them.

  • Can I create more than one bookmarks toolbar?

    I'd like to set up several toolbars -- one for myself & my favorite sites .. one for my kids for their school needs ... and one for my husband. Can this be done? Will all three show up at the top?

    pajagsfan wrote:
    Can I create more than one library on the same computer?  Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her.  When I deleted my albums from her library the disappeared from mine. (I think?)
    I know it's Valentine's Day, but before you get your wife fixed up the first thing you need to do is recover the deleted albums for your own library.  See if the files are elsewhere on your hard drive, or in the Recycle Bin.  When you find them, get them back into your own library.  Now you are ready to help your wife.
    As noted above, you can have two libraries in one Windows user account via the Shift-Start approach, but if you both use your libraries regularly, that becomes annoying quickly.  It is better to set her up with her own Windows user account. She can have her own iTunes library there.
    Get a copy of your entire iTunes folder to start her off.  She can delete stuff she doesn't want without messing you up.

  • Can i create more than one library on the same computer?

    Can I create more than one library on the same computer?  Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her.  When I deleted my albums from her library the disappeared from mine. (I think?)

    pajagsfan wrote:
    Can I create more than one library on the same computer?  Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her.  When I deleted my albums from her library the disappeared from mine. (I think?)
    I know it's Valentine's Day, but before you get your wife fixed up the first thing you need to do is recover the deleted albums for your own library.  See if the files are elsewhere on your hard drive, or in the Recycle Bin.  When you find them, get them back into your own library.  Now you are ready to help your wife.
    As noted above, you can have two libraries in one Windows user account via the Shift-Start approach, but if you both use your libraries regularly, that becomes annoying quickly.  It is better to set her up with her own Windows user account. She can have her own iTunes library there.
    Get a copy of your entire iTunes folder to start her off.  She can delete stuff she doesn't want without messing you up.

  • Can you creat an apple id through the computer?

    Can you create an apple id through the computer?

    Yes.
    https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

  • How can I create a sample with the Flex data?

    Hi mates, I'm thinking about doing some stutter vocals with the ultrabeat so I've got a vocal and I have flexed it in time so it fits well on the song's tempo, the problem is that when I create an audio file of the part of the vocal I want to use on my ultrabeat, it creates an audio file that's not fitted in time.
    How can I create the audio file fitted in time?with the flex info?
    Thanks so much!

    psikonetik wrote:
    How can I create the audio file fitted in time?with the flex info?
    You need to create Apple Loop, REX etc.
    For example select the region that you have already flexed, right click ->Bounce Merge->Bounce Inplace. I will create a new audio track with the bounced Flex work.
    Select the new region and go to Audio menu ->Open in Apple Loop Utility and check "Loop" and other attributes to create an Apple Loop. Save the Apple Loop and close the utility. It's expected that the Apple Loop aif must be created in your Project path folder or have a look at the Audio Bin in Logic where is the aif path.
    Drug the Apple Loop in the Arrange audio track ( or it will create one ) and operate with any tempos.
    !http://img59.imageshack.us/img59/4967/aglogo45.gif!

  • Can't create a .class file

    Hello
    I am glade to know this forum, I bet it is muche better than my instructor, any how ..
    I am trying to do my first java program, the progam is working properly on netbeans 4.1 with jdk1.5.0, but when I go to the command prompt on windows XP it dose not work,
    other programs work in the command prompt but mine dose not
    what is good is that I know the problem, it is that I don't have the .class file I have the .java, and as I read it was supposed to be created automatically on neatbeans but unfortunatly it is not. can I creat it somehow ??!!
    any sugestions ??

    I did a google search and found this thread.
    Just to keep information at finger tips etc.
    I installed the recent JDK from JavaSun place for Windows (XP).
    I could not compile a class file from a java file in Netbeans.
    To compile a class file from a java file I needed to use javac.
    Using cmd prompt (Command prompt) I could not use Javac (I forgot about PATH vars).
    Right click my computer, properties in menu, advanced tab, Environment variables, Edit the path variable, add the directory c:\proram files\java\jdk????\bin\ (??? being the version of your jdk), then run cmd then javac works! (remembering of course to have ; seperator!)
    ADDTIONAL INFO:
    Should I set the PATH variable?
    Set the PATH variable if you want to be able to conveniently run the JDK executables (javac.exe, java.exe, javadoc.exe, etc.) from any directory without having to type the full path of the command. If you don't set the PATH variable, you need to specify the full path to the executable every time you run it, such as:
    C:> "\Program Files\Java\jdk1.6.0_<version>\bin\javac" MyClass.java
    It's useful to set the PATH permanently so it will persist after rebooting.
    How do I set the PATH permanently?
    To set the PATH permanently, add the full path of the jdk1.6.0_<version>\bin directory to the PATH variable. Typically this full path looks something like C:\Program Files\Java\jdk1.6.0_<version>\bin. Set the PATH as follows, according to whether you are on Microsoft Windows NT or 98/2000/ME.
    Message was edited by:
    g000we

  • Can't create JVM from JNI_CreateJavaVM(&jvm, (void**)&env, &vm_args);

    I'm new in using JNI. When i compile the C program that invoke the JAVA program, everthing goes fine. I can obtain the the "exe" from the compilation.
    But when i run the "exe" file it display "can't create Java VM". Here is the part of the code in C program:
    ........//other code
    JNI_VERSION_1_2
    JavaVMInitArgs vm_args;
    JavaVMOption options[1];
    options[0].optionString =
    "-Djava.class.path=" USER_CLASSPATH;
    vm_args.version = 0x00010002;
    vm_args.options = options;
    vm_args.nOptions = 1;
    vm_args.ignoreUnrecognized = JNI_TRUE;
    /* Create the Java VM */
    res = JNI_CreateJavaVM(&jvm, (void**)&env, &vm_args);
    if (res < 0) {
    fprintf(stderr, "Can't create Java VM\n");
    exit(1);
    .......//other code
    I'm using JDK1.3, and windows ME.
    Can anyone tell me the problem?

    I think you need to get the address of the create function from the jvm.dll at runtime and call that: this works for me:
         HINSTANCE handle;
         JavaVMOption options[5];
         char JREHome[MAX_PATH];
         char JVMPath[MAX_PATH];                                        
         char classpathOption[MAX_PATH];
         char librarypathOption[MAX_PATH];
         if(!GetPublicJREHome(JREHome, MAX_PATH))
              LogError("Could not locate JRE");
              abort();
         strcpy(JVMPath,JREHome);
         strcat(JVMPath,"\\bin\\client\\jvm.dll");
        if ((handle=LoadLibrary(JVMPath))==0)
              LogError("Error loading: %s", JVMPath);
              abort();
        CreateJavaVM_t pfnCreateJavaVM=(CreateJavaVM_t)GetProcAddress(handle,"JNI_CreateJavaVM");
        if (pfnCreateJavaVM==0)
              LogError("Error: can't find JNI interfaces in: %s",JVMPath);
              abort();
         strcpy(classpathOption,"-Djava.class.path=");
         strcat(classpathOption,dir);
         strcat(classpathOption,";");
         strcat(classpathOption,JREHome);
         strcat(classpathOption,"\\lib");
         strcat(classpathOption,";");
         strcat(classpathOption,JREHome);
         strcat(classpathOption,"\\lib\\comm.jar");
         strcpy(librarypathOption,"-Djava.library.path=");
         strcat(librarypathOption,JREHome);
         strcat(librarypathOption,"\\lib");
         OutputDebugString("classpath option=");
         OutputDebugString(classpathOption);
         OutputDebugString("\n");
         OutputDebugString("librarypath option=");
         OutputDebugString(librarypathOption);
         OutputDebugString("\n");
         options[0].optionString=classpathOption;     
         options[1].optionString=librarypathOption;     
         options[2].optionString="vfprintf";
         options[2].extraInfo=_vfprintf_;
         options[3].optionString="exit";
         options[3].extraInfo=_exit_;
         options[4].optionString="abort";
         options[4].extraInfo=_abort_;
        vmArgs.version  = JNI_VERSION_1_2;
        vmArgs.nOptions = 5;
        vmArgs.options  = options;
        vmArgs.ignoreUnrecognized = false;
        if(pfnCreateJavaVM(&jvm,(void**)&env, &vmArgs)!=0)
              LogError("Could not create VM");
              abort();
         }

  • How can i Create Domain in the Weblogic 7.0

    hi !..........
    how can i create Domain in weblogic server 7.0 plz send the replay ASAP..
    thanks in advance
    From
    Sree

    Go to the directory:
    %BEA_HOME%\weblogic700\common\bin
    Start the batch or shell named as dmwiz.cmd / dmwiz.sh
    This should be able to launch a wizard and take you through the process.
    Thanks and regards,
    Paz

  • Can't create directory while in fakeroot

    Hi all,
    I'm trying to create a PKGBUILD for mplabx. When the installer tries to create the directory /opt/microchip, it gets the error permission denied.
    My pkgbuild:
    # This is an example PKGBUILD file. Use this as a start to creating your own,
    # and remove these comments. For more information, see 'man PKGBUILD'.
    # NOTE: Please fill out the license field for your package! If it is unknown,
    # then please put 'unknown'.
    # Maintainer: Cedric de Wijs <[email protected]>
    pkgname=microchip_mplab-x
    pkgver=7.02
    pkgrel=1
    epoch=
    pkgdesc=""
    arch=('x86_64')
    url="http://www.microchip.com/en_US/family/mplabx/index.html"
    license=('unknown')
    groups=()
    depends=()
    makedepends=()
    checkdepends=()
    optdepends=()
    provides=()
    conflicts=()
    replaces=()
    backup=()
    options=()
    install=
    changelog=
    source=(http://ww1.microchip.com/downloads/mplab/X_Beta/mplabx-ide-beta7.02-linux-64-bit-installer.bin)
    noextract=()
    md5sums=('fbe573dabb54120947bbefaa2d8003d4')
    build() {
    whoami
    check() {
    whoami
    package() {
    whoami
    chmod +x mplabx-ide-beta7.02-linux-64-bit-installer.bin
    mkdir -p /opt
    mkdir /opt/microchip
    mkdir /opt/microchip/mplabx
    ./mplabx-ide-beta7.02-linux-64-bit-installer.bin
    The console output:
    $ makepkg
    ==> Making package: microchip_mplab-x 7.02-1 (Mon Sep 26 07:42:15 CEST 2011)
    ==> Checking runtime dependencies...
    ==> Checking buildtime dependencies...
    ==> Retrieving Sources...
    -> Found mplabx-ide-beta7.02-linux-64-bit-installer.bin
    ==> Validating source files with md5sums...
    mplabx-ide-beta7.02-linux-64-bit-installer.bin ... Passed
    ==> Extracting Sources...
    ==> Removing existing pkg/ directory...
    ==> Starting build()...
    cedric
    ==> Starting check()...
    cedric
    ==> Entering fakeroot environment...
    ==> Starting package()...
    root
    mkdir: cannot create directory `/opt/microchip': Permission denied
    ==> ERROR: A failure occurred in package().
    Aborting...
    When I create the directory /opt/microchip (in the real root), the above error changes:
    $ su
    Password:
    [root@cedric mplab-test]# mkdir /opt/microchip
    [root@cedric mplab-test]# exit
    exit
    [cedric@cedric mplab-test]$ makepkg
    ==> Making package: microchip_mplab-x 7.02-1 (Mon Sep 26 07:45:15 CEST 2011)
    ==> Checking runtime dependencies...
    ==> Checking buildtime dependencies...
    ==> Retrieving Sources...
    -> Found mplabx-ide-beta7.02-linux-64-bit-installer.bin
    ==> Validating source files with md5sums...
    mplabx-ide-beta7.02-linux-64-bit-installer.bin ... Passed
    ==> Extracting Sources...
    ==> Removing existing pkg/ directory...
    ==> Starting build()...
    cedric
    ==> Starting check()...
    cedric
    ==> Entering fakeroot environment...
    ==> Starting package()...
    root
    mkdir: cannot create directory `/opt/microchip': File exists
    ==> ERROR: A failure occurred in package().
    Aborting...
    What can I do to get around this?
    Best regards,
    Cedric

    Thanks. I have now adjusted the PKGBUILD as such
    # This is an example PKGBUILD file. Use this as a start to creating your own,
    # and remove these comments. For more information, see 'man PKGBUILD'.
    # NOTE: Please fill out the license field for your package! If it is unknown,
    # then please put 'unknown'.
    # Maintainer: Cedric de Wijs <[email protected]>
    pkgname=microchip_mplab-x
    pkgver=7.02
    pkgrel=1
    epoch=
    pkgdesc=""
    arch=('x86_64')
    url="http://www.microchip.com/en_US/family/mplabx/index.html"
    license=('unknown')
    groups=()
    depends=()
    makedepends=()
    checkdepends=()
    optdepends=()
    provides=()
    conflicts=()
    replaces=()
    backup=()
    options=()
    install=
    changelog=
    source=(http://ww1.microchip.com/downloads/mplab/X_Beta/mplabx-ide-beta7.02-linux-64-bit-installer.bin)
    noextract=()
    md5sums=('fbe573dabb54120947bbefaa2d8003d4')
    build() {
    whoami
    check() {
    whoami
    package() {
    whoami
    chmod +x mplabx-ide-beta7.02-linux-64-bit-installer.bin
    install -d "$pkgdir"/opt/microchip/mplabx
    ./mplabx-ide-beta7.02-linux-64-bit-installer.bin
    The directories are no made without problems, but the mplab installer still complains it can't create the directories.
    $ makepkg
    ==> Making package: microchip_mplab-x 7.02-1 (Mon Sep 26 08:04:04 CEST 2011)
    ==> Checking runtime dependencies...
    ==> Checking buildtime dependencies...
    ==> Retrieving Sources...
    -> Found mplabx-ide-beta7.02-linux-64-bit-installer.bin
    ==> Validating source files with md5sums...
    mplabx-ide-beta7.02-linux-64-bit-installer.bin ... Passed
    ==> Extracting Sources...
    ==> Removing existing pkg/ directory...
    ==> Starting build()...
    cedric
    ==> Starting check()...
    cedric
    ==> Entering fakeroot environment...
    ==> Starting package()...
    root
    ERROR: ld.so: object 'libfakeroot.so' from LD_PRELOAD cannot be preloaded: ignored.
    ==> ERROR: A failure occurred in package().
    Aborting...
    It looks like makepkg only runs install in the fakeroot. Is there any way a binary installer can be run inside the fakeroot?
    Am I going in the right direction, or is there no way to run a binary installer like this?
    Are there other binary installers that are run like this?
    Best regards,
    Cedric
    Last edited by cdwijs (2011-09-26 06:32:06)

  • (mac,jdeveloper 11g) can't create a default domain on weblogic - NEWBIE

    hello,
    I would like tu use jdeveloper so I created a generic project with the purpose of create a jsf page in it.
    but I can't deploy it on the weblogic server as I can't create a default domain; here is the log for the error :
    Log File: /Users/lolveley/.jdeveloper/system11.1.1.3.37.56.60/o.j2ee.adrs/CreateDefaultDomain.log
    Label: JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660
    Product Home: /Users/lolveley/Oracle/Middleware/jdeveloper/jdev/
    Domain: /Users/lolveley/.jdeveloper/system11.1.1.3.37.56.60/DefaultDomain
    "/Users/lolveley/Oracle/Middleware/oracle_common/common/bin/wlst.sh" "/Users/lolveley/.jdeveloper/system11.1.1.3.37.56.60/o.j2ee.adrs/CreateDefaultDomain.py"
    Process started
    wlst > CLASSPATH=/Users/lolveley/Oracle/Middleware/patch_wls1033/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/Users/lolveley/Oracle/Middleware/patch_jdev1111/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/tools.jar:/Users/lolveley/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/Users/lolveley/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/Users/lolveley/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.3.0.jar:/Users/lolveley/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/Users/lolveley/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/Users/lolveley/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrf-api.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/jrf-wlst.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.odl_11.1.1/ojdl.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.odl_11.1.1/ojdl2.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.dms_11.1.1/dms.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.dconfig-infra_11.1.1.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.fabriccommon_11.1.1/fabric-common.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.xdk_11.1.0/xmlparserv2.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.xdk_11.1.0/xml.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.wsm.common_11.1.1/wsm-pmlib.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.wsm.common_11.1.1/wsm-policy-core.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.wsm.common_11.1.1/wsm-secpol.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.wsm.common_11.1.1/wsm-dependencies.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.wsm.policies_11.1.1/wsm-seed-policies.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.webservices_11.1.1/orawsdl.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.webservices_11.1.1/mdds.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.webservices_11.1.1/ws_confmbeans.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/org.apache.commons.digester_1.8.jar:/Users/lolveley/Oracle/Middleware/oracle_common/../modules/javax.xml.bind_2.1.1.jar:/Users/lolveley/Oracle/Middleware/oracle_common/../modules/javax.activation_1.1.jar:/Users/lolveley/Oracle/Middleware/oracle_common/../modules/javax.xml.stream_1.1.1.0.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.http_client_11.1.1.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.jmx_11.1.1/jmxframework.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.jmx_11.1.1/jmxspi.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.adf.dconfigbeans_11.1.1.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.adf.share.ca_11.1.1/adf-share-base.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.adf.share.ca_11.1.1/adf-share-ca.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/adflogginghandler.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/adfsharembean.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/commons-el.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/jsp-el-api.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/oracle-el.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/auditwlst.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/sslconfigwlst.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/oamap_help.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/ossoiap_help.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/jps-wlst.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.auditprovider_11.1.1/jps-wls-auditprovider.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.jps_11.1.1/jps-manifest.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.jps_11.1.1/jps-mbeans.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.jps_11.1.1/jps-upgrade.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.jps_11.1.1/jps-patching.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/lib/adf-share-mbeans-wlst.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/lib/mdswlst.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/auditwlst.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/jps-wlst.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/jrf-wlst.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/oamAuthnProvider.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/oamap_help.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/ossoiap.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/ossoiap_help.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/sslconfigwlst.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/wsm-wlst.jar
    wlst >
    wlst > PATH=/Users/lolveley/Oracle/Middleware/wlserver_10.3/server/bin:/Users/lolveley/Oracle/Middleware/modules/org.apache.ant_1.7.1/bin:/System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/jre/bin:/System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/bin:/usr/gnu/bin:/usr/local/bin:/bin:/usr/bin:.
    wlst >
    wlst > Your environment has been set.
    wlst >
    wlst > CLASSPATH=/Users/lolveley/Oracle/Middleware/patch_wls1033/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/Users/lolveley/Oracle/Middleware/patch_jdev1111/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/tools.jar:/Users/lolveley/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/Users/lolveley/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/Users/lolveley/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.3.0.jar:/Users/lolveley/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/Users/lolveley/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/Users/lolveley/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrf-api.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/jrf-wlst.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.odl_11.1.1/ojdl.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.odl_11.1.1/ojdl2.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.dms_11.1.1/dms.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.dconfig-infra_11.1.1.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.fabriccommon_11.1.1/fabric-common.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.xdk_11.1.0/xmlparserv2.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.xdk_11.1.0/xml.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.wsm.common_11.1.1/wsm-pmlib.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.wsm.common_11.1.1/wsm-policy-core.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.wsm.common_11.1.1/wsm-secpol.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.wsm.common_11.1.1/wsm-dependencies.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.wsm.policies_11.1.1/wsm-seed-policies.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.webservices_11.1.1/orawsdl.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.webservices_11.1.1/mdds.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.webservices_11.1.1/ws_confmbeans.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/org.apache.commons.digester_1.8.jar:/Users/lolveley/Oracle/Middleware/oracle_common/../modules/javax.xml.bind_2.1.1.jar:/Users/lolveley/Oracle/Middleware/oracle_common/../modules/javax.activation_1.1.jar:/Users/lolveley/Oracle/Middleware/oracle_common/../modules/javax.xml.stream_1.1.1.0.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.http_client_11.1.1.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.jmx_11.1.1/jmxframework.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.jmx_11.1.1/jmxspi.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.adf.dconfigbeans_11.1.1.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.adf.share.ca_11.1.1/adf-share-base.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.adf.share.ca_11.1.1/adf-share-ca.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/adflogginghandler.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/adfsharembean.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/commons-el.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/jsp-el-api.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/oracle-el.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/auditwlst.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/sslconfigwlst.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/oamap_help.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/ossoiap_help.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/jps-wlst.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.auditprovider_11.1.1/jps-wls-auditprovider.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.jps_11.1.1/jps-manifest.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.jps_11.1.1/jps-mbeans.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.jps_11.1.1/jps-upgrade.jar:/Users/lolveley/Oracle/Middleware/oracle_common/modules/oracle.jps_11.1.1/jps-patching.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/lib/adf-share-mbeans-wlst.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/lib/mdswlst.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/auditwlst.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/jps-wlst.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/jrf-wlst.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/oamAuthnProvider.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/oamap_help.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/ossoiap.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/ossoiap_help.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/sslconfigwlst.jar:/Users/lolveley/Oracle/Middleware/oracle_common/common/wlst/resources/wsm-wlst.jar:/Users/lolveley/Oracle/Middleware/utils/config/10.3/config-launch.jar::/Users/lolveley/Oracle/Middleware/wlserver_10.3/common/derby/lib/derbynet.jar:/Users/lolveley/Oracle/Middleware/wlserver_10.3/common/derby/lib/derbyclient.jar:/Users/lolveley/Oracle/Middleware/wlserver_10.3/common/derby/lib/derbytools.jar::
    wlst >
    wlst > Initializing WebLogic Scripting Tool (WLST) ...
    wlst >
    wlst > Welcome to WebLogic Server Administration Scripting Shell
    wlst >
    wlst > Type help() for help on available commands
    wlst >
    wlst > Error: ADRS_DOMAIN_PASSWORD environment variable not set.
    wlst >
    wlst >
    wlst > Exiting WebLogic Scripting Tool.
    wlst >
    Elapsed time: 5019 ms
    could you help me please?
    olivier.

    hey jan :
    I have another issue : I would like to use in jdeveloper JSF and primefaces, which is a component library.
    but if JSF works well, I can't install primefaces : I right-click on the properties of my project, add the primefaces jar in the libraries, and add a taglib (<%@ taglib uri="http://primefaces.prime.com.tr/ui" prefix="p" %>) in my JSF page.
    but I have an arror while deploying the project.
    and (is it a clue?) there is no completion of the "<p: ..." tags;
    but there is a window in jdeveloper : http://www.imageshotel.org/images/lolveley/apturede769cran20101017a76813.png that I can't fill ; could you help me by telling me whatr to do?
    please
    olivier

  • Can't Create New Sequence

    FCS2 Upgraded and updated yesterday.
    For some reason starting today I can't create new sequences. New Sequence doesn't make a new sequence in any of the bins (but doesn't crash - just nothing happens), whether from the File menu or right-clicking in a bin.
    Importing XML (from Color or even via Color > Send to FCP) doesn't create a sequence either.
    Creating a new project gives me an empty project, with no sequences in it either.
    Anyone?

    And, as always, FCP Rescue can make backing up or trashing your preferences nice and easy.
    http://fcprescue.andersholck.com/
    Once you've got a functioning preference set, you can back it up to restore later in case this happens again.
    --Tex

  • Can't create apple id...account limit reached...i have just bought this iphone second hand.. how can i fix this problem please

    can't create apple id...account limit reached...i have just bought this iphone second. how can i fix this problem please.

    appleid.apple.com
    ^ There's your website, go there, create apple id, smile
    https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
    There's the link part of it , Bigger smile

  • Can't create Java VM [Code :- 3 ] with JNI_CreateJavaVM()

    hello all,
    I am trying to create an inctance of JVM from C/CPP ( iam using VC++ editor) on windows. My code to create JVM is :
    res = JNI_CreateJavaVM(&jvm, (void **)&env, &vm_args);
    as a reasult of this call, -3 is returned to res.
    please help me to create a JVM and/or call a java class from C/CPP
    Thanks in advance,
    Soujanya.R

    I tried to run it this way :-
    #include <jni.h>
    #include <windows.h>
    #define JNI_EVERSION (-3) /* JNI version error */
    #define PATH_SEPARATOR ';'
    #define USER_CLASSPATH "." /* where Prog.class is */
    void main() {
              JNIEnv *env;
              JavaVM jvm = (JavaVM )0;
              jint res;
              jclass cls;
              jmethodID mid;
              jstring jstr;
              jobjectArray args;
              HINSTANCE hVM = NULL;
              JavaVMInitArgs vm_args;
              JavaVMOption options[4];
              printf("\noptions");
              options[1].optionString = "-Djava.class.path=C:/j2sdk1.4.1_07/jre/lib/rt.jar;E:/test/c/Debug/"; /* user classes */
              options[2].optionString = "-Djava.library.path=lib"; /* set native library path */
              options[0].optionString = "-Djava.compiler=NONE";
              //options[1].optionString = "-Djava.class.path=c:\\My Folder"; /* user classes */
              //options[2].optionString = "-Djava.library.path=C:\\j2sdk1.4.2_04\\include";
              options[3].optionString = "-verbose:jni";
              printf("\nversion info");
              vm_args.version = JNI_VERSION_1_2;
              vm_args.options = options;
              vm_args.nOptions = 4;
              vm_args.ignoreUnrecognized = TRUE;
              printf("\ncreate");
              hVM = LoadLibrary("C:/j2sdk1.4.1_07/jre/bin/client/jvm.dll");
              if (hVM == NULL)
                   printf("hVM is null ");
              res = JNI_CreateJavaVM(&jvm, (void **)&env, &vm_args);
              if (res < 0) {
                   fprintf(stderr, "Can't create Java VM \n",res);
                   exit(1);
              cls = env->FindClass("HelloWorld");
              //cls = env.FindClass(env,"helloWorldClass");
              if (cls == 0) {
                   fprintf(stderr, "Can't find Prog class\n");
                   exit(1);
              mid = env->GetStaticMethodID(cls, "main", "([Ljava/lang/String;)V");
              if (mid == 0) {
                   fprintf(stderr, "Can't find Prog.main\n");
                   exit(1);
              jstr = env->NewStringUTF(" from C!");
              if (jstr == 0) {
                   fprintf(stderr, "Out of memory\n");
                   exit(1);
              args = env->NewObjectArray(1, (*env).FindClass("java/lang/String"), jstr);
              if (args == 0) {
                   fprintf(stderr, "Out of memory\n");
                   exit(1);
              env->CallStaticVoidMethod(cls, mid, args);
              jvm->DestroyJavaVM();
    I could run the program.
    You need to have the C:\j2sdk1.4.1_07\lib\jvm.lib entries in Project->Settings->Link Tab
    When you open the Settings dialog box you will see Win32Debug in the
    drop down . You need to provide the entries for that page .
    Then change the drop down to Win32 Release and make an entry similarly there too.
    You should be able to run your code.
    Vishal                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

Maybe you are looking for

  • Export to text file shows extra character at line 60, 120 so on

    Hi, I am using Crystal report 13 with .net 4.0 ( Visual Studio 2010) I have an issue while exporting from CR to Text file, After every 60 lines some special character is inserted in the text file. That might be the new page character. Is this the lim

  • How do I block pings from the outside to the ASA 5505 outside interface?

    I was asked to block pings from the internet to the outside interface of our ASA-5505 firewall.  I found a post that said to enter "icmp deny any outside", however that does not do it. I created an ACL to try and do the trick, also to no avail: acces

  • Case when question

    Hi All, Is it possible to use case-when statement in this SQL query? select SUB_ID, count(T_ID),sum(TIME) from TABLE_A where SUB_ID <> ' ' and STARTDATE between :P6_DATE_FROM and :P6_DATE_TO CASE :P6_FILTER_BY WHEN '1' THEN 'and SUB_ID like :P6_FILTE

  • How to generate the ATR files for reports with out manually?

    Hi all, how to create the ATR files for reports in OBIEE 11g with out manually? is there any other method to create the ATR files by using the OBIEE Server? please provide me the solution for this? we are creating manually for each and every report,

  • Password forgot in 000 client

    Hi Basis Gurus, We have forgotten our sap* and ddic password in 000 client. Please tell us the steps how to reset it. Please help us Regards, Anil.