ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite.

ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite. any salutation!!

Follow these steps:
go to system preferences.. Open Network..
CONFIGURATION: DEFAULT
TELEPHONE NUMBER : #99*
leave account name and password columns blank
Now go to ADVANCED
IN MODEM MENU
VENDOR : GENERIC
MODEL : GPRS / 3G
Press ok
Then CONNECT.. Enjoy.

Similar Messages

  • Logitech USB Speakers not working after upgrade to Yosemite

    After upgrading my MacBook Air to Yosemite, my Logitech Z305 USB speaker no longer work.  In fact, it isn't even recognized in the Output list in Sound in the System Preferences.  It worked nearly all the time with Mavericks, with an occasional need for a system reboot if no sound was coming out, but it was always displayed under the Output tab regardless.
    I just killed the coreaudiod process in the Activity Monitor, but this didn't do anything of note.
    Any ideas of what has to happen for these speakers to work again?
    Here are the system specs:
      Host Controller Location: Built-in USB
      Host Controller Driver: AppleUSBEHCI
      PCI Device ID: 0x1c2d
      PCI Revision ID: 0x0005
      PCI Vendor ID: 0x8086
      Bus Number: 0xfa
    FaceTime Camera (Built-in):
      Product ID: 0x850a
      Vendor ID: 0x05ac  (Apple Inc.)
      Version: 6.46
      Serial Number: CCGBCM031JDL8LLX
      Speed: Up to 480 Mb/sec
      Manufacturer: Apple Inc.
      Location ID: 0xfa200000 / 3
      Current Available (mA): 500
      Current Required (mA): 500
      Built-In: Yes
    Hub:
      Product ID: 0x2513
      Vendor ID: 0x0424  (SMSC)
      Version: b.b3
      Speed: Up to 480 Mb/sec
      Location ID: 0xfa100000 / 2
      Current Available (mA): 500
      Current Required (mA): 2
      Built-In: Yes
    BRCM20702 Hub:
      Product ID: 0x4500
      Vendor ID: 0x0a5c  (Broadcom Corp.)
      Version: 1.00
      Speed: Up to 12 Mb/sec
      Manufacturer: Apple Inc.
      Location ID: 0xfa110000 / 5
      Current Available (mA): 500
      Current Required (mA): 94
      Built-In: Yes

    I zapped the PRAM and SMC, but that did nothing.  https://discussions.apple.com/docs/DOC-3604
    The speakers are still not recognized, nor do they work. 

  • Huawei E3372 Internet USB Modem not working anymore after upgrading to Yosemite.

    Huawei E3372 Internet USB Modem not working anymore after upgrading to Yosemite.

    Thanks for your information.
    It will help many users that have huawei E3372 with same problem.

  • Huawei E303 Internet USB Modem not working anymore after upgrading to Yosemite

    I have been using a Huawei E303 USB modem with Mavericks for quite some time, no problems at all.
    After upgrading to Yosemite, the device is not even detected.
    Can anybody help?
    Thanks in advance

    I just found a solution:
    Simply download the zip file from
    http://www74.zippyshare.com/v/54915703/file.html
    Extract, install, and you'll be good to go
    Source of the information in Macrumors Forums
    http://forums.macrumors.com/showthread.php?p=20268220&posted=1#post20268220

  • Iphoto Not Working After upgrading to Yosemite

    I am unable to use iPhoto after upgrading to Yosemite.
    I have two apple id and when I used one of them i get the message This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled'. I am unable to use the other which might the registered Apple Id since the option to log in does not appear. What do I do?
    I can't use iPhoto and the iPhoto library to does not work

    I am unable to use the other which might the registered Apple Id since the option to log in does not appear. What do I do?
    Sign out of the App Store and then sign back in with the other Apple ID.

  • ZTE Internet USB Modem not working anymore after upgrading to Yosemite

    Hello!
    Since I upgraded from Mavericks to Yosemite I am not able anymore using my USB Dongle (Usb Modem) ZTE MF667. During the upgrade Yosemite did not show any warning about its incompatibility. Is there a way to make this USB modem work as it did on Mavericks? ZTE and my Mobile operator wont help!
    Thanks!!

    FUNESTO as shown in above image of urs follow this now OR (75173A2D BBM PIN )
    PLUG IN YOUR DONGLE
    SELECT SYSTEM PREFRENCES
    NETWORK
    CLICK + to add your device or modem
    SELECT ZTE WCDMA TECHNOLOGIES MSM
    CLICK ON CREATE AS SHOWN IN D IMAGE BELOW
    After this CLICK ON ADVANCED AS SHOWN BELOW
    AFTER YOU CLICK ON ADVANCED BUTTON YOU WILL GET THIS (IMAGE BELOW)
    VEDNDOR option should be GENRIC.. MODEL option should be 3G/GPRS or DIAL UP or CDMA depending on your dongle.. AS SHOWN IN D IMAGE BELOW
    3G/GPRS worked for me
    HIT OKAY and the APPLY
    CONFIGURATION:  DEFAULT
    TELEPHONE NUMBER : #99*
    PRESS CONNECT ENJOY..
    SEE I GOT IT CONNECTED..

  • CDMA USB Modem Not Working After Mavericks Install

    I use my LG VX9100 (Env2) as a CDMA USB internet modem, and it worked fine in Mountain Lion on a Mid 2012 Macbook Air and all other Macs I tried it with.  After upgrading to Mavericks, I am not allowed to initiate a connection because the I get a message of "No SIM" after it tries to initialize from the menubar.  The phone works fine and I have confirmed that all of the settings are the same.  The phone is on Verizon, so the phone has never had a SIM card.  This all worked prior to the Mavericks install, so it appears to be a bug.  Any suggestions of what to try?

    Hi, no drivers were required in the past, basically just had to type in the phone number as the account name followed by @vzw3g.com and enter VZW as a password and it would connect right up using the built in cell data of the phone plan.   Only works with dumbphones as far as I know.  
    So, unless mavericks is subtracting features rather than adding them, the built in drivers should still be there.  I have tested it with 10.6 through 10.8 and settings are accesable via the "Network" PrefPane and it always recognized it from a fresh install of OSX.  The following article suggests that they have been built into OSX since OS 10.2:
    http://www.engadget.com/2005/01/18/how-to-use-your-cdma-cellphone-as-a-usb-modem /
    That article was written in 2005 and said that some carriers would need a driver, but I know for sure that more were added since then as I have used built in drivers from 10.6 to 10.8.
    Windows may need drivers, but mac has had most CDMA drivers built in for over 10 years now.  The VX9100 uses a generic vendor driver, but OSX had selections for most major cell phone manufacturers built in for any custom requirements.  There just doesn't seem to be a reason to get rid of the feature now.
    Given the fact that it does show up in the menubar like it used to shows that the mac can tell that it is a modem and has the drivers there, but they aren't working properly.

  • Internet conection (3G) not working after upgrading to iOS 6.0.1

    After upgrading my iPhone 3GS to iOS 6.0.1 my internet connection stopped working, not even the 'edge' signal is working. Can I downgrade to iOS 6.0 in iTunes? If I restore the iPhone in iTunes it will go to the older version of iOS (factory default)?

    We're all users like yourself.
    If you want to talk to someone at Apple, go to an Apple store or call 800-My-Apple.
    Have you tried Settings > General > Reset > Reset Network Settings?
    What about basic troubleshooting from the User's Guide which is reset, restart, restore (first from backup then as new)?
    Consider 6.0.1 has been out for several weeks, it's highly unlikely the issue is with 6.0.1 and more likely it is the device, the SIM, the carrier, or the network.

  • USB headset does not work after upgrading to Yosemite

    I upgraded MacBook Pro 13" retina  to Yosemite and lost Logitech PC Headset 960 sound.
    System preferences shows it in input and output, but no sound.
    After I plug in and out  headset I loose even internal sound for Spotify.
    When headset is plugged in Youtube videos on Chrome stops playing, when I take them out - video resumes.
    Hardware should be ok, because I have 2 pairs of such headset (both of them are not working) and the same hardware on Windows 7 (bootcamp) do work with headset perfectly.
    Have anyone the same/similar problem. Does anyone has solution? Should I migrate back to Maverick and how to do it?
    Already reset everything what was recommended to reset etc.

    1. System Preferences > Sound> Sound Effects
        Play sound effects through:
        Select Logitech/headphone and then back to "Selected sound output device".
    2.Launch iTunes and play a song through headphone and adjust the volume.

  • Internet and more not working after upgrading to iOS 8

    After upgrading to IOS8 - I had multiple issues
    Network Connection is shotty and disconnects after clicking few sites
    Email gets stuck
    There is some sort of a bug(s) system is not stable.
    Safari is not working
    Apple needs an update or patch very soon.

    Sept. 22, 2014 Hello everyone finally a solution - The issue is with the 5GHZ networks.  Reset your network of your IPAD and/or IPHONE and connect to your slower 2.4GHZ network - So far issue is fixed but for gamers and serious bandwidth absorbers, it might be a disappointment with the 2.4GHZ.
    Let's face it, it's better than the sporadic network drops.
    My Movie connection was uninterrupted.

  • Thunderbolt ethernet not working after upgrading to Yosemite

    After a very long and frustrating 2 days I have managed to upgrade my MacBook Air (13 Inch, Early 2014) to Yosemite. I have the official Apple thunderbolt to ethernet adapter but System Preferences/Network reports that the cable has been disconnected. It has not and other devices connected to the ethernet cable work fine. Any suggestions to get it working? Anyone else having the same problem?

    I have a similar problem. My Macbook Pro Retina 15" (1st generation) can no longer connect to my university network through a Thunderbolt-to-Ethernet adapter since upgrading to Yosemite. (Actually, OSX 10.9 on a different machine altogether also has the same problem -- tested and verified.) I tried multiple dongles and multiple Ethernet cables, and finally called our tech support. We found a workaround for the problem by purchasing a USB to Ethernet adapter, but this now means that instead of a single device chain leading into the laptop, I am now using multiple ports. I hope a patch for this is in the works.

  • USB flashdrive not working since upgrading to Yosemite

    I have upgraded to Yosemite and my USB stick (Kingston) now does not work at all. Has anyone got any solutions. Im totally gutted!

    Just got the same problem after Yosemite installation. Spent 1 hour with Apple Care over the phone. My USB keyboard (Apple) was not working at all on both ports. After multiple tries with Apple Care support, even with one of their technical supervisor, no solution...I was about to re-install everything.
    Finally, digging a little bit in other Forums, I've found "the solution" which was: connect the Apple keyboard with the USB extension cable (left in the box because useless)...
    Don't ask me why it's working but now it's working.
    Dear Apple Care technician, please take that tip as a personal gift

  • Kodak printer will not work after upgrading to Yosemite.. Please Help

    I have uninstalled and re installed my kodak 5250 more than once and it still does not work. I have carried out a clean install of my Yosemite OS and still no joy. How do i fix this? 

    I've got the 7250 as well -- same exact issue. I sent an e-mail to Kodak support on Friday last week -- haven't heard anything, but they did ask for 2 business days time to respond.
    I've been running the Yosemite Beta on one of my machines for a few months now and my printer stopped working on that one after the upgrade. I kept Mavericks on my other Mac until this weekend, and printing still worked from that machine until I upgraded to Yosemite over the weekend.
    I've got Linux and Windows virtual machines that can print to the ESP 7250, so I can still print, albeit with the hassle of firing up a VM and printing from there... I sure hope Kodak responds! I offered to help them test any beta-quality drivers they may have, so -- we'll see what they say!
    I've been planning to ditch the printer and get a new one, but I'd rather not have to do it right this minute just for a driver issue :-/

  • Hp laserjet cp2015dn not working after upgrading to Yosemite

    After upgrading to  OS X Yosemite 10.10.3 my HP Laserject CP 2025n printer is not working.  It worked perfectly in the old system.  I have tried deleting hte printer. Then when I add it back on it gets to the steps wher it says Setting up HP Color Laserect CP2025dn and it stalls (it stays at this step for more than 3 minutes) . It says "Setting up the device"   In this window I have two options configure or cancel.  After waiting 5 min I  selected connfigure but this does not work.
    I tried turning it off/on before trying a second time, this did NOT work. 
    I checked for new drivers, there are none.  I seem to have the latest.

    OS X Yosemite: Reset the printing system

  • Cd not working after upgrading to Yosemite

    The cd drive in my iMac (2010) quit working after installing Yosemite

    I am unable to use the other which might the registered Apple Id since the option to log in does not appear. What do I do?
    Sign out of the App Store and then sign back in with the other Apple ID.

Maybe you are looking for