Zul manager add on error on workspace URL

Hello, we are using the Hyperion Planning 11.1.2.5.210. I am using Firefox Mozilla to go to workspace, however, when I type in the workspace URL I get an error message that the Remote XUL Manager add on for Mozilla Firefox in not configured.
Please help.
Thanks

The version you have given is for Smart View I believe and not planning, have you installed the XUL Manager and added the url because depending on version it will be required.
Cheers
John

Similar Messages

When I try to resume adobe manager reader download I get an add-on error

my computer is a Windows Vista (64 Bit) Sp1
It already had adobe reader 9 installed, but I decided to install Adobe Reader 9.1.
I don't know if it's the same version so this is what happened.
I downloaded adobe reader 9.1 and then I paused it and turn off the computer. The next day I tried to resume the Adobe Reader 9.1 with the adobe reader manager that was in my desktop, but I got an error message saying an add-on was being used and it had to close. Everytime I resume it always closes. I tried deleting the add-on ( get_atlcom Class, which is the add-on you have to download in order to get adobe reader 9.1) and installing it again, but the same Adobe Manager page that pops up with the add-on error comes on my screen.
this is the message that i get from the add-on error
gp.ocx
get_atlcom Class
Company Name: Adobe
Description DLM
it's something like that
can anyone help me with this error.
Or can I just simply remove(uninstall) adobe reader 9 and try to install it again?
thank you

If I were you, I would remove everything related with Reader by the method Pat Willener describes in the "can't install adobe reader" thread, and then download the version you want from the fpt site given by ~graffiti in the "Trying to download Adobe Reader but can't"...

I am getting this error message, " The URL is not valid and cannot be loaded" when I try to go to Firefox home. I have uninstalled add-ons, uninstaleed and reinstalled a fresh new firefox which did not help

I am getting the following error message, " The URL is not valid and cannot be loaded" when I try to go to firefox home. I uninstalled add-ons , uninstalled Firefox and then installed a fresh version. Still have the problem.
Thanks for the help

That issue can be caused by a corrupted or incomplete Visual C++ installation (multiple versions can be installed side-by-side; SxS) that is missing some runtime components (Redistributable Packages) that Firefox depends on (problem with an embedded manifest file that specifies a specific runtime version).
You need to install the missing components (e.g. VisualC++ 2005 Redistrbutable).
* https://www.microsoft.com/download/en/details.aspx?id=5638
*[[/questions/908165]] The URL is not valid and cannot be loaded
*[https://bugzilla.mozilla.org/show_bug.cgi?id=713167 bug 713167] - Microsoft.VC80.CRT SideBySide errors, browsercomps.dll

Workspace URL error

Hi All,
Please can any one help me to resolve the below workspace error.
Iam unable to connect to HFM using Workspace URL.
The error message is
Message from the ISAPI plugin:
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF.
We restarted the services in order and checked the IIS services are up and running, but still we are getting the same above error.
Thanks in advance
Regards,
Prabhakar.

What do you get when you attempt to open the URL for :
http://<** INSERT SERVER NAME FOR HFM WEB (Not workspace)**>/hfm/
you should get a reply of just 'hfm'.
If you do not get anything, you'll want to figure this out first. Consider the following :
- If you get sometype of error, etc, then HFM Web isn't configured properly. Follow instructions to set that up.
- If you actually get into the HFM apps from this URL, then when HFM Web was setup, you didn't indicate it was being used with Workspace. When you install/use Workspace, HFM Web behaves differently than it would if you do not use Workspace.
After this is working, check your Workspace settings to make sure that is the URL for HFM app? When you connect to workspace, you really just get proxied over to the HFM Web server when you open an app, etc.

How do you resolve Financial Management service validation error in EPM ?

Does anyone know how to resolve Financial Management service validation error from EPM Diagnostic Report?
Environment:
Quad-Core AMD Processor 2.2 GHz (Server Machine)
5 GB RAM
Server 2003 Standard 32-Bit SP2 (also tried in Enterprise)
Application Server:
WebLogic Server 9.2 Custom Installation (with Add-Ins)
http://www.oracle.com/technology/software/products/ias/htdocs/wls_main.html
Database:
Oracle 10gR2 (Standard Installation per step-by-step guide from Oracle)
http://www.oracle.com/technology/software/products/database/index.html
Hyperion EMP System 11.1.1.3:
Installer
Foundation Services (4 Files )
EMP Architect
Financial Management, Planning, Financial Reporting and Web Analysis (primarily interested in FM)
http://www.oracle.com/technology/software/products/bi/performance-management/index.html
The following are the sequences of steps carried out during the Installation and Configuration of EPM:
1)     Installed the Server along with its respective SP2 – Shutdown the machine
2)     Assigned IP and DNS addresses
3)     Installed Window components by ticking Application Server Console, Enable COM+ access, IIS and DNS
4)     Run “dcpromo” to create a Domain Controller with default values and assigned a domain name – Shutdown the machine
5)     Installed Weblogic Server 9.2 and configure it using Configuration Wizard – Selected “test environment” and ticked default “listening port” – Shutdown the machine
6)     Basic installation of Oracle Database 10gR2 using Step-by-Step guide provided by Oracle and carried out Password Management steps. After installation, I then created a user “oracle” and assigned it to ora_dba User Group with the required Local Security Policies – “log on as a batch job” and “Act as part of operating system”
7)     Logged into database and acknowledge the licensing window – Shutdown the machine
8)     Restarted the machine and checked all relevant and newly installed Database and WebLogic services are running.
9)     Started Installing EPM components by double clicking “InstallTool.cmd” and selected all relevant components at ONCE as per Installation Guide – Result: - All selected EPM components were successfully installed without errors or exceptions
10)     At the end of installation window, I carried out the configuration in the following scearios:
Scenario 1: Configuration all at Default settings
Scenario 2: Configuration all, except “Application Server” I selected the WebLogic9.2
Scenario 3: Configuration all, except “Application Server” and “Workspace Web Server” were being Welogic9.2 and IIS HTTP
RESULT: After all numerous installations, all came down to ONE ERROR from “Diagnostic Report” stating the following:
Financial Management:
FAILED SVR: HFM Service Validation Check if HFM service in working state.
Error: Error message: <03/11/2010 05:32:26 PM> CreateApplicationCAS... Failed at line: 2
Recommended Action: Make sure HAT utility is working. 1 s
I then simply ignored this error and tried to deploy an Application, all worked fine until you get to the point at “Job Console” where you need to press “Refresh” button. Progress remained at 12% until it got timedout after 300 seconds and force attempt of refreshing resulting in “aborted” job with the following error:
Error Reference Number: {DB3940F5-2D4A-46AB-A370-77F82F121BBA}
Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:39:58 PM;Svr: PBAR;File: CHsvDataSourceImpl.cpp;Line: 196;Ver: 11.1.1.3.0.2413;
Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: CHsxServer.cpp;Line: 1276;Ver: 11.1.1.3.0.2413;
Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: CHsxServer.cpp;Line: 1190;Ver: 11.1.1.3.0.2413;
Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: AgentHelper.cpp;Line: 728;Ver: 11.1.1.3.0.2413;
Num: 0x8000ffff;Type: 1;DTime: 4/12/2010 4:40:08 PM;Svr: PBAR;File: CHfmAwbAgent.cpp;Line: 744;Ver: 11.1.1.3.0.2413;
This is, I believe preventing me from deploying Consolidation Apps, including Sample Application provided with EPM Downloads. I have tried installing and configuring by components. All failed with the same outcome.
I have been working on this effortlessly in different combinations to get at least one Financial Management Application get deployed so I could enhance my learning adventure. As it stands, I am not sure where to get help and completely lost in the World of Oracle. I am also come to wonder whether “Free Downloads of EPM” are indeed, is “complete and is in working-state” or do I need a licence to use for personal learning experience? Are there different downloads for different needs or/users For example, eDelivery downloads are different from OTN Agreement downloads?
I have downloaded the files from following URL:
http://www.oracle.com/technology/software/products/bi/performance-management/index.html
I am completely lost and all services are up and running and not sure what I am missing!! Any assistance will be greatly appreciated.
Many Thanks
BT
Edited by: user8973921 on 13-Apr-2010 05:08
Edited by: user8973921 on 13-Apr-2010 10:56
Edited by: user8973921 on 14-Apr-2010 02:30

I am having exactly the same problem using Windows 2003 Standard editions SP2. Is there anyone who knows a possible solution for this? The effect on HFM is that is not possible to create an application, since I always get an error that says "Server execution failed"
Error Reference Number: {E68F87E6-588E-4665-862C-AAB02CB299DA}
Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServerImpl.cpp;Line: 3522;Ver: 11.1.1.3.0.2413;
Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServer.cpp;Line: 1115;Ver: 11.1.1.3.0.2413;
Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServer.cpp;Line: 857;Ver: 11.1.1.3.0.2413;
Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxClient.cpp;Line: 2106;Ver: 11.1.1.3.0.2413;

SharedServices and Workspace URL's are not working in EPM System 11.1.2.2

Hello,
SharedServices and Workspace URL's are not working in EPM System 11.1.2.2
I have installed EPM system V11.1.2.2 in single server environment (MS 2008 Server R2) with following components:
* Foundation Services
* HFM
* FDM
Have used embedded Weblogic server as application web server and Oracle HTTP server as web server. The installation was successful.
While configuration,
1) I selected the option to deploy web applications SharedServices and Workspace to a single managed server. The applications got successfully deployed to EPMServer0.
2) Also, I selected to configure Oracle HTTP server as web server.
Both these steps were successful.
But SharedServices and Workspace URL's are not working. Getting 404 error.
SharedServices : http://inmum01hyp05.internal.vodafone.com:19000/interop/index.jsp
Workspace : http://inmum01hyp05.internal.vodafone.com:19000/workspace/
When I checked Weblogic admin console, EPMServer0 is in SHUTDOWN state, tried to start it but it goes in ADMIN state instead of RUNNING.
Checked EPMServer0 log at "D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs" and found the error given at the end of this message.
Can anyone please suggest a solution for this.
####<Jun 6, 2013 11:43:20 AM IST> <Emergency> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499200246> <BEA-149259> <Server 'EPMServer0' in cluster 'EPMServer' is being brought up in administration state due to failed deployments.>
####<Jun 6, 2013 11:43:20 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499200902> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceHttps for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201090> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceJms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201090> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseService for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201106> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Jms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201121> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12 for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201121> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Https for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebLogicServer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201137> <BEA-000256> <Invoking weblogic.transaction.internal.StartupClass.main(null)>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201168> <BEA-149059> <Module dms.war of application DMS Application [Version=11.1.1.1.0] is transitioning from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201168> <BEA-149060> <Module dms.war of application DMS Application [Version=11.1.1.1.0] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:22 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499202402> <BEA-149059> <Module /inspection.wsil of application wsil-wls is transitioning from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:22 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499202402> <BEA-149060> <Module /inspection.wsil of application wsil-wls successfully transitioned from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:44:13 AM IST> <Info> <Diagnostics> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1370499253433> <BEA-320000> <The Diagnostics subsystem is initializing on Server EPMServer0.>
Thanks in advance.
Tej

Hi John,
today's update:
* Uninstalled EPM system V11.1.2.2 completely and after rebooting the server installed EPM system V11.1.2.2 again.
* During configuration, deployed SharedServices and Workspace to single managed server EPMServer0 on Weblogic server and configured to Oracle HTTP server as web server. Configuration seems successful.
* Started EPM system.
* checked Weblogic admin console - EPMServer0 goes into ADMIN state from STARTING.
* Checked EPMServer0 logs at "D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs" and found the error given below:
####<Jun 7, 2013 2:12:14 PM IST> <Error> <Deployer> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594534718> <BEA-149205> <*Failed to initialize the application 'SHAREDSERVICES [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: epm-hss-libraries, exact-match: false]..*
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: epm-hss-libraries, exact-match: false].
     at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
     at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
     at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
     at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
     at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
####<Jun 7, 2013 2:12:15 PM IST> <Warning> <J2EE> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594535124> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: epm-bpmui-libraries, referenced from: D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\WORKSPACE_11.1.2.0\riys07]. Make sure the referenced optional package has been deployed as a library.>
####<Jun 7, 2013 2:12:15 PM IST> <Error> <Deployer> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594535186> <BEA-149205> *<Failed to initialize the application 'WORKSPACE [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.applcore.model, exact-match: false], [Extension-Name: xerces, exact-match: false]..*
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.applcore.model, exact-match: false], [Extension-Name: xerces, exact-match: false].
     at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
     at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
     at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
     at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
     at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
Can you please suggest how to overcome this error of Weblogic?
Thanks in advance,
Tej

WorkSpace URL not Opening

Hi All,
I am unable to open the workspace url ...it gives these error
Error Message in Mozila
Not Found
The requested URL /workspace/index.jsp was not found on this server.
Oracle-Application-Server-10g/10.1.3.1.0 Oracle-HTTP-Server Server at hyperion.xyz.local Port 80
Error Message in Explorer
The page cannot be found
The page you are looking for might have been removed, had its name changed, or is temporarily unavailable.
Please try the following:
If you typed the page address in the Address bar, make sure that it is spelled correctly.
Open the home page, and then look for links to the information you want.
Click the Back button to try another link.
Click Search to look for information on the Internet.
HTTP 404 - File not found
Internet Explorer
Pl Help me to figure it out...Other users are able to open...
Regards
BK

Hi BK,
1. Did you use IIS to deploy .
2. In that case, go to IIS manager and try to right click on 'workspace' folder -> browse.
3. Is it by any chance on 64 bit env?
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

Cannot Modify Identity Management Realm : [LDAP: error code 20 - Attribute

Hi ,
I am new to the OID and now i am trying to Creating a New Identity Management Realm, i followed the steps of these followed URL
http://www.oracle.com/technology/obe/obe_as_10g/im/realm_mng/realm.htm
in step 12 it showing the following error
Cannot Modify Identity Management Realm : [LDAP: error code 20 - Attribute
Anyone please help me
Thanks & Regards,
Manoj

I was doing a terrible mistake.. Instead of using createSubcontext, i was using modifyAttributes to create an user. The Problem is resolved now. Here is the latest code
try {
               Hashtable env = new Hashtable();
               env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.ldap.LdapCtxFactory");
               env.put(Context.SECURITY_AUTHENTICATION, "simple");
               env.put(Context.SECURITY_PRINCIPAL, "cn=" + "Directory Manager");
               env.put(Context.SECURITY_CREDENTIALS, "password");
               env.put(Context.PROVIDER_URL, "ldap://localhost:389/dc=mytest,dc=com");
               DirContext ctx = new InitialDirContext(env);
               // Create attributes to be associated with the new context
               Attributes attrs = new BasicAttributes(true); // case-ignore
               Attribute sn = new BasicAttribute("sn");
               sn.add("NewUser");
               Attribute cn = new BasicAttribute("cn");
               cn.add("NewUser");
               Attribute objclass = new BasicAttribute("objectclass");
               objclass.add("top");
               objclass.add("inetOrgPerson");
               attrs.put(objclass);
               attrs.put(sn);
               attrs.put(cn);
               // Create the context
               Context result = ctx.createSubcontext("cn=NewUser", attrs);
          } catch (Exception e) {
               System.out.println("e is " + e);
          }

Concurrent Manager encountered an error while running Oracle*Report for you

hi
our team is running a report.but encountered
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_DELV_ID='8022'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Enter Password:
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1401: '': Fatal PL/SQL error occurred.
Report Builder: Release 10.1.2.0.2 - Production on Mon Jun 21 11:26:16 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 451508.
Review your concurrent request log and/or report output file for more detailed information.
+---------------------------------------------------------------------------+
Executing request completion options...
+------------- 1) PUBLISH -------------+
Beginning post-processing of request 451508 on node DEMO at 21-JUN-2010 11:26:17.
Post-processing of request 451508 failed at 21-JUN-2010 11:26:17 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
+--------------------------------------+
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 21-JUN-2010 11:26:17
+---------------------------------------------------------------------------+how to solve it?when i am searching in this error in cmctl log there is nothing for it.
i have lnched a SR on this they told to run it by appsrwrun.sh.how to run this report by appsrwrun.sh??
rgrds
Edited by: new2appsdba on Jun 21, 2010 4:19 AM

Hi,
how do you suspect its a OPP related issue??what is OPP?
Enter value for request_id: 451508
old   5: AND fcpp.concurrent_request_id = &&request_id
new   5: AND fcpp.concurrent_request_id = 451508
    REQ_ID NODE_NAME
LOGFILE_NAME
    451508 DEMO
/t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/log/FNDOPP94508.txt
[demoap@demo ~]$ vi /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/log/FNDOPP94508.txt
[6/20/10 1:37:36 PM] [main] Starting GSF service with concurrent process id = 94508.
[6/20/10 1:37:36 PM] [main] Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=5
[6/20/10 1:37:37 PM] [Thread-16] Service thread starting up.
[6/20/10 1:37:37 PM] [Thread-15] Service thread starting up.
[6/21/10 11:12:00 AM] [OPPServiceThread0] Post-processing request 451495.
[6/21/10 11:12:00 AM] [94508:RT451495] Executing post-processing actions for request 451495.
[6/21/10 11:12:00 AM] [94508:RT451495] Starting XML Publisher post-processing action.
[6/21/10 11:12:00 AM] [94508:RT451495]
Template code: WILPACKSLIP
Template app: ONT
Language:      en
Territory:     00
Output type:   PDF
[6/21/10 11:12:00 AM] [UNEXPECTED] [94508:RT451495] java.io.FileNotFoundException: /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/out/o451495.out (No such file or directory)
        at java.io.FileInputStream.open(Native Method)
        at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
        at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
[6/21/10 11:12:00 AM] [94508:RT451495] Completed post-processing actions for request 451495.
[6/21/10 11:22:27 AM] [OPPServiceThread0] Post-processing request 451505.
[6/21/10 11:22:27 AM] [94508:RT451505] Executing post-processing actions for request 451505.
[6/21/10 11:22:27 AM] [94508:RT451505] Starting XML Publisher post-processing action.
[6/21/10 11:22:27 AM] [94508:RT451505]
Template code: WILPACKSLIP
Template app: ONT
Language:      en
Territory:     00
Output type:   PDF
[6/21/10 11:22:27 AM] [UNEXPECTED] [94508:RT451505] java.io.FileNotFoundException: /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/out/o451505.out (No such file or directory)
        at java.io.FileInputStream.open(Native Method)
        at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
        at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
[6/21/10 11:22:27 AM] [94508:RT451505] Completed post-processing actions for request 451505.
[6/21/10 11:26:17 AM] [OPPServiceThread1] Post-processing request 451508.
[6/21/10 11:26:17 AM] [94508:RT451508] Executing post-processing actions for request 451508.
[6/21/10 11:26:17 AM] [94508:RT451508] Starting XML Publisher post-processing action.
[6/21/10 11:26:17 AM] [94508:RT451508]
Template code: WILPACKSLIP
Template app: ONT
Language:      en
Territory:     00
Output type:   PDF
[6/21/10 11:26:17 AM] [UNEXPECTED] [94508:RT451508] java.io.FileNotFoundException: /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/out/o451508.out (No such file or directory)
        at java.io.FileInputStream.open(Native Method)
        at java.io.FileInputStream.<init>(FileInputStream.java:106)
                                                              at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
        at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
[6/21/10 12:00:59 PM] [94508:RT451533] Completed post-processing actions for request 451533.
[6/21/10 12:17:51 PM] [OPPServiceThread0] Post-processing request 451573.
[6/21/10 12:17:51 PM] [94508:RT451573] Executing post-processing actions for request 451573.
[6/21/10 12:17:51 PM] [94508:RT451573] Starting XML Publisher post-processing action.
[6/21/10 12:17:51 PM] [94508:RT451573]
Template code: XXWEBB_EXP_INV
Template app: ONT
Language:      en
Territory:     00
Output type:   PDF
[6/21/10 12:17:51 PM] [UNEXPECTED] [94508:RT451573] java.io.FileNotFoundException: /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/out/o451573.out (No such file or directory)
        at java.io.FileInputStream.open(Native Method)
        at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
        at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
[6/21/10 12:17:51 PM] [94508:RT451573] Completed post-processing actions for request 451573.
[6/21/10 12:19:19 PM] [OPPServiceThread0] Post-processing request 451577.
[6/21/10 12:19:19 PM] [94508:RT451577] Executing post-processing actions for request 451577.
[6/21/10 12:19:19 PM] [94508:RT451577] Starting XML Publisher post-processing action.
[6/21/10 12:19:19 PM] [94508:RT451577]
Template code: WILEXINVREP
Template app: ONT
Language:      en
Territory:     00
Output type:   PDF
[062110_121919525][][EXCEPTION] [DEBUG] ------- Preferences defined PreferenceStore -------
[062110_121919526][][EXCEPTION] [DEBUG] ------- Environment variables stored in EnvironmentStore -------
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.LOW]:[-1]
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.LOW]:[-1]
[062110_121919526][][EXCEPTION] [DEBUG] [SECURITY_GROUP_ID]:[0]
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_INTERVAL]:[300]
[062110_121919526][][EXCEPTION] [DEBUG] [NLS_CHARACTERSET]:[US7ASCII]
[062110_121919526][][EXCEPTION] [DEBUG] [RESP_APPL_ID]:[-1]
[062110_121919526][][EXCEPTION] [DEBUG] [NLS_LANGUAGE]:[AMERICAN]
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]:[2]
[062110_121919526][][EXCEPTION] [DEBUG] [NLS_NUMERIC_CHARACTERS]:[.,]
[062110_121919526][][EXCEPTION] [DEBUG] [APPS_JDBC_URL]:[jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS=(PROTOCOL=tcp)(HOST=demo.webbindia.com)(PORT=1527)))(CONNECT_DATA=(SID=DEMO)))]
[062110_121919527][][EXCEPTION] [DEBUG] [RESP_ID]:[-1]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_MAX_JDBC_CONNECTIONS]:[500]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_USABLE_CHECK]:[false]
[062110_121919527][][EXCEPTION] [DEBUG] [USER_ID]:[-1]
[062110_121919527][][EXCEPTION] [DEBUG] [NLS_TERRITORY]:[AMERICA]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_PLSQL_RESET]:[false]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_CONTEXT_CHECK]:[true]
[062110_121919527][][EXCEPTION] [DEBUG] [NLS_DATE_FORMAT]:[DD-MON-RR]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_SIZE]:[5]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.HIGH]:[-1]
[062110_121919527][][EXCEPTION] [DEBUG] [NLS_SORT]:[BINARY]
[062110_121919527][][EXCEPTION] [DEBUG] [NLS_DATE_LANGUAGE]:[AMERICAN]
[062110_121919527][][EXCEPTION] [DEBUG] [LOGIN_ID]:[-1]
[062110_121919528][][EXCEPTION] [DEBUG] ------- Properties stored in Java System Properties -------
[062110_121919528][][EXCEPTION] [DEBUG] [APPLTMP]:[/t01/demoap/inst/apps/DEMO_demo/appltmp]
[062110_121919528][][EXCEPTION] [DEBUG] [java.runtime.name]:[Java(TM) 2 Runtime Environment, Standard Edition]
[062110_121919528][][EXCEPTION] [DEBUG] [sun.boot.library.path]:[/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/i386]
[062110_121919528][][EXCEPTION] [DEBUG] [java.vm.version]:[1.5.0_08-b03]
[062110_121919528][][EXCEPTION] [DEBUG] [OVERRIDE_DBC]:[true]
[062110_121919528][][EXCEPTION] [DEBUG] [dbcfile]:[/t01/demoap/inst/apps/DEMO_demo/appl/fnd/12.0.0/secure/DEMO.dbc]
[062110_121919528][][EXCEPTION] [DEBUG] [java.vm.vendor]:[Sun Microsystems Inc.]
[062110_121919528][][EXCEPTION] [DEBUG] [java.vendor.url]:[http://java.sun.com/]
[062110_121919528][][EXCEPTION] [DEBUG] [path.separator]:[:]
[062110_121919528][][EXCEPTION] [DEBUG] [APPLCSF]:[/t01/demoap/inst/apps/DEMO_demo/logs/appl/conc]
[062110_121919528][][EXCEPTION] [DEBUG] [java.vm.name]:[Java HotSpot(TM) Server VM]
[062110_121919528][][EXCEPTION] [DEBUG] [file.encoding.pkg]:[sun.io]
[062110_121919528][][EXCEPTION] [DEBUG] [user.country]:[US]
[062110_121919529][][EXCEPTION] [DEBUG] [sun.os.patch.level]:[unknown]
[062110_121919529][][EXCEPTION] [DEBUG] [java.vm.specification.name]:[Java Virtual Machine Specification]
[062110_121919529][][EXCEPTION] [DEBUG] [user.dir]:[/t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/log]
[062110_121919529][][EXCEPTION] [DEBUG] [java.runtime.version]:[1.5.0_08-b03]
[062110_121919529][][EXCEPTION] [DEBUG] [CLIENT_PROCESSID]:[30369]
[062110_121919529][][EXCEPTION] [DEBUG] [java.awt.graphicsenv]:[sun.awt.X11GraphicsEnvironment]
[062110_121919529][][EXCEPTION] [DEBUG] [java.endorsed.dirs]:[/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/endorsed]
[062110_121919529][][EXCEPTION] [DEBUG] [os.arch]:[i386]
[062110_121919529][][EXCEPTION] [DEBUG] [JTFDBCFILE]:[/t01/demoap/inst/apps/DEMO_demo/appl/fnd/12.0.0/secure/DEMO.dbc]
[062110_121919529][][EXCEPTION] [DEBUG] [java.io.tmpdir]:[/tmp]
[062110_121919529][][EXCEPTION] [DEBUG] [line.separator]:[
[062110_121919529][][EXCEPTION] [DEBUG] [java.vm.specification.vendor]:[Sun Microsystems Inc.]
[062110_121919529][][EXCEPTION] [DEBUG] [os.name]:[Linux]
[062110_121919529][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[062110_121919530][][EXCEPTION] [DEBUG] [cpid]:[94508]
[062110_121919530][][EXCEPTION] [DEBUG] [sun.jnu.encoding]:[UTF-8]
[062110_121919530][][EXCEPTION] [DEBUG] [oracle.apps.fnd.common.Pool.leak.mode]:[stderr:off]
[062110_121919530][][EXCEPTION] [DEBUG] [java.library.path]:[/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/i386/server:/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/i386:/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/../lib/i386:/t01/demoap/apps/tech_st/10.1.3/lib32:/t01/demoap/apps/tech_st/10.1.3/lib:/t01/demoap/apps/apps_st/appl/cz/12.0.0/bin:/t01/demoap/apps/apps_st/appl/iby/12.0.0/bin:/t01/demoap/apps/apps_st/appl/pon/12.0.0/bin:/t01/demoap/apps/apps_st/appl/sht/12.0.0/lib]
[062110_121919530][][EXCEPTION] [DEBUG] [java.specification.name]:[Java Platform API Specification]
[062110_121919530][][EXCEPTION] [DEBUG] [java.class.version]:[49.0]
[062110_121919530][][EXCEPTION] [DEBUG] [sun.management.compiler]:[HotSpot Server Compiler]
[062110_121919530][][EXCEPTION] [DEBUG] [queue_appl_id]:[0]
[062110_121919530][][EXCEPTION] [DEBUG] [os.version]:[2.6.18-164.11.1.el5xen]
[062110_121919530][][EXCEPTION] [DEBUG] [LONG_RUNNING_JVM]:[true]
[062110_121919530][][EXCEPTION] [DEBUG] [user.home]:[/t01/demoap]
[062110_121919530][][EXCEPTION] [DEBUG] [user.timezone]:[GMT+05:30]
[062110_121919530][][EXCEPTION] [DEBUG] [java.awt.printerjob]:[sun.print.PSPrinterJob]
--------------------------------------------------------------------------------lots of lines ----------------------------------------
[GC 17474K->10837K(24648K), 0.0037890 secs]
[GC 17685K->11057K(24648K), 0.0035530 secs]
[GC 17905K->11271K(24648K), 0.0029030 secs]
[GC 18119K->11488K(24648K), 0.0024650 secs]
[GC 18336K->11702K(24648K), 0.0023940 secs]
[GC 18550K->11919K(24648K), 0.0025010 secs]
[GC 18767K->12133K(24648K), 0.0024460 secs]
[GC 18981K->12344K(24648K), 0.0024020 secs]
[GC 19192K->12575K(24648K), 0.0024790 secs]
[GC 19423K->12781K(24648K), 0.0025650 secs]
[GC 19629K->12991K(24648K), 0.0024010 secs]
[GC 19839K->13212K(24648K), 0.0024430 secs]
[GC 20060K->13427K(24648K), 0.0024160 secs]
[GC 20275K->13641K(24648K), 0.0024440 secs]
[GC 20489K->13857K(24648K), 0.0024410 secs]
[GC 20705K->14073K(24648K), 0.0024570 secs]
[GC 20921K->14284K(24648K), 0.0024340 secs]
[GC 21132K->14504K(24648K), 0.0024580 secs]
[GC 21352K->14719K(24648K), 0.0024620 secs]
[GC 21567K->14935K(24648K), 0.0024600 secs]
[GC 21783K->15151K(24648K), 0.0024360 secs]
[GC 21999K->15365K(24648K), 0.0024180 secs]
[GC 22213K->15004K(24648K), 0.0204220 secs]rgrds
Edited by: new2appsdba on Jun 22, 2010 1:43 AM
Edited by: new2appsdba on Jun 22, 2010 2:12 AM
Edited by: new2appsdba on Jun 22, 2010 5:37 AM

SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.

Hi,
This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
So far I have installed
http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
2012 release.
Here is the detail of error message:
TITLE: Package Validation Error
Package Validation Error
ADDITIONAL INFORMATION:
Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection
Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
(Microsoft.DataTransformationServices.VsIntegration)
Here are my environment details:
SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
Services Project2\Integration Services Project2\Package.dtsx.
Does this kind of Shared drives have any impact to give this issue?
Thanks in advance!
Ketan
P.S.: I had look at this forum question -->
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssis

Hi Arthur,
Thanks for your response.
Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
1) Some times excel source files cannot be parsed by excel source connection manager.
2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage while destination mapping.
3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file. <-- For
this we tried IMEX setting also
4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
Do you think it is advisable to convert Excel into CSV or Flat file.
Thanks,
Ketan

Private Browsing function is suddenly not working. Error message :"The URL is not valid and cannot be loaded." How can I repair?

Private Browsing function is suddenly not working. Error message :"The URL is not valid and cannot be loaded."
How can I fix it?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Netflix viewed perfect for over a month, then it didn't with this error msge: Invalid URL The requested URL "/home", is invalid. Reference #9.9d0bc841.1320231048.92bcc44 --What's up with this now?

Been watching Netflix on my Verizon HP Notebook, it's less than 3mo old. runs windows xp...pretty standard stuff. Anyway tried to login to netflix and Firefox gave this error message--Invalid URL
The requested URL "/home", is invalid. Reference #9.9d0bc841.1320231048.92bcc44 -- I called Netflix & there system running perfectly. My pc running perfectly as well. Logged into netflix using IE--worked just fine. So by process of elimination, it's Firefox's Problem! I have NO CLUE about it, never seen it before on ANY browser. Tried opening & closing FFx, restarting puter, etc...Don't know what else to tell you except Firefox works on every other website now EXCEPT NETFLIX, it's the darnedest (I know that's not a word LOL) I've seen--it happened 10/2/11 @ about 3am!

As I understand:
The procedure works.
The link 'appears' to work. (ie you saw the procedure run a 2nd at the database level)
But it doesn't actually work (because you get a 404)
I think I ran into an issue, on a completely different page type, that produced an 'error 404'. (I can't seem to reproduce it, though)
The only way I discovered what was really going on was with an HTTP sniffer. (eg HTTPFox for FireFox)
Through that, I noticed that the browser was (for some reason) calling a completely non-sensible APEX page. (hence the PAGE NOT FOUND error)
My solution was to add a "submit to self" branch point.
If that doesn't work, I'm at a loss.
MK

[ODBC Driver Manager] Function sequence error

Hi all,
i´m trying to built an webservice and if i try to run my code i get following
error: [ODBC Driver Manager] Function sequence error .CAn someone tell me what
this means?
Here comes my code:
     static String Daten(int Nummer)
                    java.sql.Connection conn = null;
                    java.sql.Statement stmt = null;
               try
                                                       Context ctx = null;
                                                       Hashtable ht = new Hashtable();
                                                       ht.put(Context.INITIAL_CONTEXT_FACTORY,
                                                                      "weblogic.jndi.WLInitialContextFactory");
                                                       ht.put(Context.PROVIDER_URL,
                              "t3://localhost:7001");
                              // Get a context for the JNDI look up
                              ctx = new InitialContext(ht);
                              javax.sql.DataSource ds
                              = (javax.sql.DataSource) ctx.lookup ("webservice-data-source");
                              conn = ds.getConnection();
                              System.out.println("Making connection...\n");
                              // execute some SQL statements to demonstrate the connection.
                              stmt = conn.createStatement();
                              System.out.println("Vor ResultSet");
                                             ResultSet result = stmt.getResultSet(); //Bringt Fehler
                                             final Vector erstespalte = new Vector();
                                             final Vector zweitespalte = new Vector();
                                             final Vector drittespalte = new Vector();
                                             final Vector Zeilen;
                                             final Vector end = new Vector();
                              try {//2.Block
                                             stmt.executeQuery("Select * from Person where Kundennummer=5");
                                             while(result.next())
                                                            erstespalte.add(result.getObject(1));
                                                            zweitespalte.add(result.getObject(2));
                                                            drittespalte.add(result.getObject(3));
                                                       Zeilen = new Vector();
                                                                 for(Enumeration a = erstespalte.elements() ; a.hasMoreElements()
                                                                                for(Enumeration b = zweitespalte.elements() ;b .hasMoreElements()
                                                                                          for(Enumeration c = drittespalte.elements() ; c.hasMoreElements()
                                                                                               Zeilen.add(a.nextElement());
                                                                                               Zeilen.add(b.nextElement());
                                                                                               Zeilen.add(c.nextElement());
                                                                                               end.add(Zeilen);
                                                                           }System.out.println(end);
                                                       result.close();
                                   }//2.try-Block
               catch (SQLException e) {
                    System.out.println(e);
                              }//1.try-Block schliessen
                              catch (Exception e) {
                         System.out.println("Exception was thrown: " + e.getMessage());
                                        finally {
                                                  try {
                                                  if (stmt != null)
                                                       stmt.close();
                                                  if (conn != null)
                                                       conn.close();
                                                  catch (SQLException sqle) {
                                                  System.out.println("SQLException during close(): " + sqle.getMessage());
                                                  }//finally-Block schliessen
                                        return ("HAllo");
          }//Methode abschliessen
Thank you very much for helping !!!

Please post this in the JDBC newsgroup: weblogic.developer.interest.jdbc
Also, please include your full error message.
-- Rob
Hakan wrote:
Hi all,
i´m trying to built an webservice and if i try to run my code i get following
error: [ODBC Driver Manager] Function sequence error .CAn someone tell me what
this means?
Here comes my code:
static String Daten(int Nummer)
java.sql.Connection conn = null;
java.sql.Statement stmt = null;
try
Context ctx = null;
Hashtable ht = new Hashtable();
ht.put(Context.INITIAL_CONTEXT_FACTORY,
"weblogic.jndi.WLInitialContextFactory");
ht.put(Context.PROVIDER_URL,
"t3://localhost:7001");
// Get a context for the JNDI look up
ctx = new InitialContext(ht);
javax.sql.DataSource ds
= (javax.sql.DataSource) ctx.lookup ("webservice-data-source");
conn = ds.getConnection();
System.out.println("Making connection...\n");
// execute some SQL statements to demonstrate the connection.
stmt = conn.createStatement();
System.out.println("Vor ResultSet");
ResultSet result = stmt.getResultSet(); //Bringt Fehler
final Vector erstespalte = new Vector();
final Vector zweitespalte = new Vector();
final Vector drittespalte = new Vector();
final Vector Zeilen;
final Vector end = new Vector();
try {//2.Block
stmt.executeQuery("Select * from Person where Kundennummer=5");
while(result.next())
erstespalte.add(result.getObject(1));
zweitespalte.add(result.getObject(2));
drittespalte.add(result.getObject(3));
Zeilen = new Vector();
for(Enumeration a = erstespalte.elements() ; a.hasMoreElements()
for(Enumeration b = zweitespalte.elements() ;b .hasMoreElements()
for(Enumeration c = drittespalte.elements() ; c.hasMoreElements()
Zeilen.add(a.nextElement());
Zeilen.add(b.nextElement());
Zeilen.add(c.nextElement());
end.add(Zeilen);
}System.out.println(end);
result.close();
}//2.try-Block
catch (SQLException e) {
System.out.println(e);
}//1.try-Block schliessen
catch (Exception e) {
System.out.println("Exception was thrown: " + e.getMessage());
finally {
try {
if (stmt != null)
stmt.close();
if (conn != null)
conn.close();
catch (SQLException sqle) {
System.out.println("SQLException during close(): " + sqle.getMessage());
}//finally-Block schliessen
return ("HAllo");
}//Methode abschliessen
Thank you very much for helping !!!

IE showing Flash Player status disabled, despite the fact that it's enabled in Manage Add Ons.

I uninstalled Flash Player version 13 on Windows 8 and then re-installed Flash Player version 11.7.700.275. After the successful installation message, I restarted the computer, but when I access the URL 'http://helpx.adobe.com/flash-player.html' it says, Your Flash version: Disabled. Despite the fact that IE is showing it enabled in Manage Add-Ons. Please help.

Please ask your question on a forum for the Flash Player

IDOC_INPUT_ORDER - How manage the custom error message ?

Hello,
on EXIT_SAPLVEDA_002 and EXIT_SAPLVEDA_003 I done some custom check, (I would show some custom message as a result of these check).
My question is: How to show these custom message on the standardc idoc spool (WE02) ??
There's DERRTAB internal table to manage the error, but is not available on there exit ...(EXIT_SAPLVEDA_002 and 3)
Any idea ??
thank you

Hello,
question is if you want to raise an error, which makes sense only if the document is not posted or just an information message.
Please consider that you can put messages into the idoc only connected with a status. If you set status 51 thge Idoc is reprocessible, if you set status 53 it is successfully processed.
In error case you can raise exception USER_ERROR. in exit EXIT_SAPLVEDA_002. Set SY-MSGTY, SY-MSGID, SY-MSGNO, etc before. In exit EXIT_SAPLVEDA_003 you can set changing parameter ok to space. Then SAP will add an error message.
/Michael

Zul manager add on error on workspace URL

Similar Messages

Maybe you are looking for