ZV:M usb host feature quest

we all know that we can copy, for example, a song from a flash memory into the ZV:M, but can we write to a flash memory too ?!

The host feature on the Zen Vision M 60gb units doesn't work with all card readers, it only works with a subset of card reader chipsets.
Is the reader on the list of supported readers?From Creatives Product Specs: Below is a list of cameras as well as the required mode selection if applicable, and card readers that are tested to work with ZEN Vision:M 60GB.
Canon EOS 30D
Canon Powershot A430
Canon Powershot S80
Canon Powershot SD700
Canon Powershot IXUS 800 IS
Casio Exilim EX-Z000
Creative PC-CAM Slim 950
Fuji Finepix F30
Fuji Finepix E900 Zoom
Fuji Finepix A600 (Dual PTP & MSC mode), works in PTP mode only
Kodak Easyshare P850
Kodak Easyshare V60
Kodak Easyshare C663
Kodak Easyshare Z650
Nikon Coolpix P3
Nikon D200 (Dual PTP & MSC mode), works in PTP Mode only
Olympus FE-50 (Dual PTP & MSC mode), works in MSC Mode only
Panasonic DMC-FZ7
Panasonic DMC-FX0
Pentax Optio A0 (Dual PTP & MSC mode), works in MSC Mode only
Sony Cybershot DSC-S600 (Dual PTP & MSC mode), works in PTP Mode only
Sony Cybershot DSC-H2 (Dual PTP & MSC mode), works in PTP Mode only
Sony Cybershot DSC-T30 (Dual PTP & MSC mode), works in PTP Mode only
Belkin Hi-Speed USB 2.0 8-in- Media Reader (F5U248)
Dazzle CompactFlash Reader (DM-8000)
Transcend Portable Multi-Card Reader (TS-RD3)
SanDisk ImageMate- 2-in- Reader/Writer
SanDisk MobileMate- SD- Plus 5-in- Reader

Similar Messages

Zen Vision M (60GB) and supported devices (USB Host Featu

I would know if Canon Powershot A520 is a supported device by USB Host Feature.
thanks
mat

rileylarson wrote:
yeah. i am trying to wait for it to come in. where do you li've.
I li've in the Northeast US.... I hope it's available soon!

USB Host controller missing in device manager

Hello,
I've installed WIN 7 64 bit on my laptop; everything worked fine at the beginning; but after a couple of days, after a system update, all of the 4 USB ports stop working
In device manager there is no USB Host controller entry, and I have four device named "Multifunction device" marked in error
Already tried without success:
- update device driver autosearch online
- uninstall device and reboot; the system can't find proper drivers
- reinstall all drivers from HP driver update utility
- reinstall drivers with Intel driver update utility
- reinstall windows (no reformat)
- other driver search utilities
I can rule out an hardware problem because if I boot from CDROM or even usb keys, they work properly; given this fact, if I reformat the disk probably I could fix the problem I guess, but I prefer avoid this extreme solution, I use this laptop for my job and I have lot of customer network and VPN configured.
Thanks

After following the Apple instructions on how to install Boot Camp on my MacBook, I had similar problems. I received the following non-functional driver list:
Bluetooth USB Host Controller
Coprocessor
Ethernet Controller
Network Controller
SM Bus Controller
Video Controller (VGA Compatible)
I tried running the repair feature from the OSX disc, no help. It may be noteworthy that I installed XP Professional SP3 straight off of an install disc, and did not do the following:
Install SP2
Install Boot Camp 2.1
Update to SP3
I am currently downloading Boot Camp 2.1 and hope that it will solve this problem. If anyone can help, please let me know!
Cedric

LG G4 USB Host support - & green spot issue

Hi - using my new LG G4 on the weekend. I noted two disasters. I have the dreaded green spot on my camera. Sneding back for replacement on this issue. See photo below. Also - I noted that USB Host Mode does not support 3rd party apps. What this means is an important app I have used on Samsung S3 and S4 does not work. Its called RccDroidPro and is used to shoot tethered to Sony Alpha and other Cameras. Bummer. XDA developers have patches for custom ROMSs - not one for G4 yet. I am not keen to root my phone - anyone know another way of making this work - or where do we report feature requests for future ROM releases to Telstra?

Hey Jeff, that's bad luck there with the G4, from all reports they seem overall to be a great looking unit, especially in the camera department. Looks like you might have got the odd one out though. I'm not overly familiar with the RccDroidPro, but it was my understanding that in the first place this was a Sony app developed for use with Sony devices etc. primarilly for usb teethering of DSLR cameras. Actually LG would have to make your hardware compatible, USB wise to run this app.

USB Host Controller not recognized by Windows 7.

Just installed Windows 7 in a1130n desktop. The USB Host Controller and the Std USB Host Controller are not recognized by the operating system. The USB ports and the media memory ports on the front panel will not work.

My HP Z400 is suffering from the same problem. Did you discover a solution?

Problem in USB-IF xHCI USB Host Controller

Dear,
I hope that you will be fine. My name is Rana Imran and i am using HP ENVY Ultrabook 6-1106tx with Windows 8.1.
I think i have driver problem in USB-IF xHCI USB Host Controller. I am sending you pictures of problem. Please solve this problem.
Thanks
This question was solved.
View Solution.

Hi,
The first suggestion I'd make is to try downloading and reinstalling the switchable graphics driver on the following link as it lists a fix for WIDI.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-114949-1&cc=us&dlc=en&lc=en...
When the reinstallation has com[pleted, restart the notebook.
If you find this has not corrected the issue, try the download available from Intel on the link below.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23861&lang=eng&ProdId=3227
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

KT4VL USB Host controller Problems

I have a KT4VL (MS-67212) and am having problems with the USB Host controller. I am running Win 98SE. This happens wether or not I have any USB devices installed. I have taken out all installed add on cards and tried and still get the same problem.
If I reboot the computer with the USB Host Controller installed, it won't boot. It goes into safe mode where I can uninstall the USB host controller. I can then reboot fine.
Every time I reboot though the hardware detector pops up saying that I need to install the drivers for the USB host controller. If I install them, then everything works fine, all USB devices are found and and function perfectly. That is, until I reboot and it goes to safe mode.
It has the 1.1 bios in it. I didn't install a floppy drive in this PC so I can't flash it at this time, if that is what I need to do.
Can anyone help?
Thanks,
KTGBP

I have a Satellite C855D-S5320. I had my hard drive crash. I installed windows7 64 bit. All the drivers work except the USB Controller. just the Usb ports on the right side of the unit do not work. one of them is a USB 3. I tried all the driver updates off your web site, I tried windows driver search, I tried driver Genius program too. I also ran a diognostic on the motherboard, it shows all working fine. I upgraded the bios and checked settings there as well. Please help if you can, Tom
Attachments:
IMG_0071.JPG ‏452 KB

Windows reports that the "USB-IF xHCI USB Host Controller" device is not working properly.

I have been receiving the following error and instructions to fix it for a long time now, prior to updating to Windows 8.1:
A device is not working properly
Windows reports that the "USB-IF xHCI USB Host Controller" device is not working properly.
Recommended solution to the problemUse Windows Update to check whether new device drivers are available. Proceed as follows:
Open Device Manager
Search in the device manager for the device whose driver you would like to update and double-click on the device name. You may first have to enable the "Show hidden devices" entry in the "View" menu.
Switch to the Driver tab, click Update driver and follow the instructions
When I follow the instructions and try to update the driver, I am told "The best driver software for your device is already installed."
How do I update the driver to stop receiving the error?
This question was solved.
View Solution.

I have solved the initial problem.
I found the solution on the Forum at http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03926756&tmp_task=solveCategory&cc=us&dlc=en&la...

USB host controller

How do you download a hi-speed USB host controller?

The question is better served with another question. You need a system with usb2.0 ports or better.
Does your computer model (unknown, as you did not state it) have USB1 or USB2 ports?
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

What is apple Bluetooth USB host controller?

I want to know functinalty of apple bluetooth usb host controller. What exactly it does ?

can you please provide some link regarding this? so that i can get information about it.

Satellite Pro 6100 - USB host controller

usb host controller

Hello
And what do you want to know about USB host controller? Do you need drivers or have you problems with USB ports?
Please explain your problem detailed in some English sentences that other users here can help you.

Standard USB Host Controller

Hi,
The USB connection used for connecting to a printer failed. Trying to fix it I removed the Standard USB Host Controller Port_#0001.Hub_#0009 and as a result the device is now marked as "unknown device" with status= error#43.
How can I fix it?
Thanks, Eitan
This question was solved.
View Solution.

Thank you for the prompt reply. I have followed the following steps (from Microsoft support forum) but it didn't solve the problem:
Lets reinstall the USB Controllers.
First, please disconnect all USB devices and then perform the following steps:
1. Click "Start" button, type “devmgmt.msc” (without quotation marks) in the “Search” bar and press "Enter". Click “Continue” if necessary.
2. In Device Manager, double click to expand "Universal Serial Bus controllers", right click on the Host Controller, click "Uninstall" and click "OK".
3. Repeat the step 2 to uninstall all items under "Universal Serial Bus controllers".
Then, restart your computer and Windows 7 will reinstall all USB controllers automatically.
All usb driver items restored correctly with the exception of one line that still shows "unknown device", with the following details:
Standard USB Host Controller
Port_#0001.Hub_#0009
Error 43
What else can I do?

The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the

When i tried to login in inbrowserediting.adobe.com i see that:
The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user.
What does it mean? What is problem?

Hi,
I have just created my First website using Muse and Its all been uploaded to my FTP server but i cant access the in browser editing which was the whole reason why i re-done the website for my client using muse
its saying the following
"The FTP server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user. server configured for this site doesn't seem to match the URL you entered. Make sure that you use the Upload to FTP Host feature in Muse to publish the site directly to the final location and that you are logging on to In-Browser Editing with the same user."
Yet i Can access my website fine "www.calmwood.com.au"
My ftp server responds to either the IP Address or the DNS Address www.calmwood.com.au
so i am not understanding how it thinks its different. when its fully referenced
any help would be appreciated.
thanks

Problem with using new Upload to FTP Host feature...

I tried using the "Upload to FTP Host" feature to upload to GoDaddy.com. It worked fine the first time but now I get this message:
Error:
Error creating folder //images. Click Resume to try again. If this problem persists, try again later.
I tried a few times and even waited two days but I am still getting the same message. So I tried to "Export as HTML" liked I used to do and now for some reason it will not create a CSS or Scripts folder. Only an images folder.
Also, the first time the "Upload to FTP Host" worked for some reason not all the images were there and the transition box I have is not fading smoothly from one image to the next.
Please help!!!
Thanks,
Melissa

The issue looks like it might be related to a known issue with our FTP upload client. We currently incorrectly assume the server is configured to use / as the root direcotry. We have a fix for the issue, that will be released in an upcoming update (likely to be sooner rather than later). The workaround for it is actually pretty simple though. If you login to your FTP server, you should be able to see what directory you are at, and you can use the full path there to upload successfully.
For example, if you login using a different FTP client, you might see something like /home/users/myuser/ in the address bar. In Muse, in the directory location, if you place /home/users/myuser you will upload to the correct directory. If you want to upload to a specific directory, simply add that to the end of the directory path.
If you are unable to upload after following the above steps, as Abhishek says, it is likely a permissions error. Try exporting first and using a third party client to upload it and let us know if you are able to do so successfully from there.

Does the ellipsis 8 have a usb host capability?

does the ellipsis 8 have a usb host capability? i have a wired keyboard that seems to work on my note 4 but not the ellipsis

No, the Ellipsis 8 does not support USB Host capability. Your best bet will be to use a Bluetooth keyboard.

ZV:M usb host feature quest

Similar Messages

Maybe you are looking for