ZV5000 LAPTOP UPGRADED TO WIN 7

DOES ANYONE KNOW ANY SOFTWARE FIRMWARE CHANGES THAT WILL RE-INSTALL A SOUND DRIVER TO MY LAPTOP?
AFTER UPGRADING TO WINDOWS 7 NO SOUND IS AVAILABLE AT ALL
This question was solved.
View Solution.

Hi:
See if Windows Update finds an audio driver as follows...
Be connected to the internet.
Go to the device manager and click on the multimedia audio controller needing drivers.
Click on the driver tab.  Click on update driver and select the automatic search.
It may take a few minutes for windows to search the windows update driver database.
If it comes back negative, try this XP driver...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-44349-3&cc=us&dlc=en&lc=en&...
If that XP driver fails to work, try this XP driver...
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&s...
If the XP drivers don't install automatically, try manually installing them.

Similar Messages

  • I have a HP dv6000 laptop, I recently upgraded to Win 7. The microphone of my laptop is not working.

    Hello,
    I have a hp dv6000 notebook, the microphone of my laptop is not working since I upgraded to win 7.

    Did you make sure whether the device to which you are trying to connect is discoverable?
    Cheers and regards,
    • » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo

  • VM created on Win 8.1 Pro Laptop cannot find win 7 iso file on USB

    VM cannot find USB to load Win 7       
    I have a Windows laptop with Win 8.1 Pro installed. I turned on Hyper-V and created a VM. Everything worked up to that point. I also downloaded the Win 7 iso and placed it on a USB thumb drive.  I also downloaded the Win 7 installer.
    When I "start" the VM, I get a black screen with a message the VM could not load an OS.
    It appears to me that the VM does not know where to look for the OS. I cannot find any way to tell it where to look.
    I spent over $300 for upgrades to Win 8.1 Pro and a licensed copy of Win 7 so I could run Win 7 on my laptop as I need it to run UPK (which is not compatible with Win 8).
    As a last resort I went to the Micrsoft store in Miami and offered to buy a Surface Pro 3 if they would install the VM and Win 7 on that for me. They said it was very easy to do and I would have no problems, etc., etc., etc. In other words they did not have
    a clue about what I was talking about.
    I hate to see over $3000 worth of hardware collecting dust on my closet shelf because I cannot use them. I am hopeful someone here can help a non-techie make this thing work.
    Thanks in advance,
    Dennis
    PS - Went to the Apple store last night and was shown a MacBook Air with Parallels installed. It was running Apple stuff on the Apple OS and MS Office 365 on Win 7. It was all very seamless so am leaning very much to going with Apple as a solution.

    You don't say that you attached the iso to the VM.  The easiest way to do
    that is to connect to the VM and then on the console, pull down the
    "Media" menu, Select "Insert Disk", then browse to the ISO and select it.
    Then under the "Action" menu, select "Reset".
    You can also mount an iso in the settings for the VM.
    Bob Comer

  • No Bluetooh Driver after upgrade to Win 8.1- HP Pavilion TS 11 Notebook PC

    Hello,
    I need help.
    When I bought this laptop it came with Win 8.0 and everything worked fine. But after the upgrade to win 8.1, the bluetooh crashed, and since there its not  recognized.
    I tried everythig even try to install the drive to win 8.0 but did not work ...
    What should I do?
    thank you

    Thanks paulovpinto. I do not see Bluetooth drivers available for Windows 8.1 for your computer.
    HP Pavilion TouchSmart 11-e000sp Notebook PC Drivers
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=5396...
    This thread has a possible solution, albeit complicated if you are using Ralink Bluetooth in Windows 8.1. See mpw101's post here.
    Re: HP Support Assistant - Ralink August 2013 Update:
    http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/HP-Support-Asistant-Ralink-...
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • MSI GT70 202US upgraded to win 8.1. Lots of issues

    hi,
    i recently upgraded my msi gt70 202us from win 7 to win 8.1 to increase the performance on BF4.
    i am facing alot of problems. i just hate this lan card. bigfoot killer networks has the most unreliable hardware and drivers. i cant get the software or the drivers to install. upon trying to install the latest version Bigfoot Networks Killer Network Manager 6.1.0.603 (64Bit) i am getting an error saying
    "Your hardware is not supported on this version of windows. The installer cannot continue"
    although this version is compatible with win 8.1 as said on the website.
    I am trying to just install the drivers and that is not working either.
    I tried installing the earlier version, that didnt help either.
    and i cannot get the keyboard backlight to work or the eject cd tray option. can someone please help me with this.
    and on additional note i would like to update the bios aswell. can someone please help me with that too. I havent updated my bios ever, but i have upgraded from win 7 to 8.1. as i read somewhere upgrading the bios on my model which came with win 7 is not suitable. is there a safe way to update bios.

    Quote from: James D on 24-December-13, 03:10:50
    If your laptop came with Windows 7 then you should install Windows 7 BIOS only. However if you want all keys work then install Firmware for Windows 8.
    Again, James, you are wrong.
    Re-read your sentence again (if you can understand your own sentences).....
    They do NOT need to install the Firmware (or EC firmware) in order for it to work in Windows 8. They need to stay with the Windows 7 EC firmware that originally came installed on their laptop. SCM and everything else work just fine under Windows 8 (and 8.1.....if it works at all) using the EC firmware for Windows 7. How do I know this? I have a Windows 7 based GT70 with everything working fine in Windows 8. Not only this, but it's been said over and over and over. Apparently still hasn't sunk in yet though for some people.
    Its ok, these things can get very confusing for some people.

  • No sound on my G580 Notebook after upgrading to win 8.1

    SInce upgrading to Win 8.1 on my 64bit Lenovo G580 notebook I kept receiving a message about Dolby driver problems (my sound did work though).  Then I thought I would get rid of this message - update Dolby drivers - and followed advice on the internet.  As I remember, this advice told me to uninstall all sound / dolby drivers and then install new drivers.
    In doing this I somehow also uninstalled Dolby PCEE4 drivers for my G580.
    I subsequently installed the latest G580 conexant drivers but with no success.  I can "see" that the drivers are working (when I click on the sound icon bottom right of the desktop), but there is no sound.  Other internet advice has been to obtain PCEE4 drivers - but I don't find any files from Lenovo to download.
    I've tried to reload Dolby Advanced Audio V2, but it ends prematurely with the prior message that PCEE needs to be installed.
    Can someone please assist?

    http://support.lenovo.com/gb/en/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g580-no...
    are you sure its not the realtek drivers as some have said its in there
    Thx dave
    yoga 2, lenovo b540
    3 custom gaming pc systems

  • Trying to upgrade from Win 8 to Win 8 Pro, missing "add features"

    Hello,
    I bought a new laptop that has Win 8 preinstalled on it.  I can't figure out how to tell what edition, I think it's Home something or other.
    I've tried following the directions at:
    http://windows.microsoft.com/en-US/windows-8/feature-packs
    When I swipe and search for "add features" it comes up blank.  I have a MSDN subscription and downloaded (and got a key for) a Win 8 Pro ISO, but I tried running it and it didn't seem to do anything.  I was never presented with a 
    place to enter my key for the upgrade.  I assume I can use this key if I ever get the "add features" to show up?
    -Charlie

    On 4/6/2013 6:46 PM, Charles Foxtrot wrote:
    <snipped>
    You have to change the product-key on the "Computer"  to the Windows 8 Pro Key. But you will not be able to give the Win 8 pro product-key at the time during the DVD installation process, at least that's what happened for me doing a Win 8
    Pro install over Win 8 Home. This is assuming you booted off the Win 8 Pro DVD and did the install, and it never asked for the product-key.
    After the install, you can go to the Desktop tile from the Start page and  go to File Explorer where you will see the "Properties" tab. You can also  type in "computer" from that Start page, and then  you can click the
    icon that takes you to File Explorer and to the "Properties" tab. It's at the "Properties" tab where you will see the specs for the computer and the O/S type. You will also see a line about "changing the product-key or activate it",
    and it is there where you will give the Win 8 pro product-key. It will run for a little bit, but after it's all said and done, the O/S should indicate that it's Win 8 pro.
    I believe the only time you will see the "change product-key" is when you boot off the Win pro DVD and do the install, and then the change product-key feature is activated so you can change the product-key.
     I went through hell for a couple of hours. I did the install off the Win 8 pro DVD and installed it. It never stopped and asked for the product-key. I looked at the computer specs after the install, and it never showed that it was Win 8 pro. It was still
    Win 8 Home. :)  What the hell do mean you are not Win 8 Pro? I did the install off of the DVD! :)

  • Brightness key not working after upgrading to win 10

    MY laptop has been upgraded to win 10, but after the update brightness key is not working. 

    Hello I managed to solve my problem of brightness key not working by Installing the Intel HD Graphic 3000 Driver from Intel official site. So if your Graphic card is Intel HD 3000 Graphic and your system is 64 Bit OS then you can follow the below link to download it and install.....https://downloadcenter.intel.com/download/24971/Intel-HD-Graphics-Driver-for-Windows-7-8-64-bit Note :- This Graphic driver only support the following intel Processor And If Your Are still running the built in intel graphic card, then only download it and install at you own risk.Supports Intel(R) HD graphics on:            2nd generation Intel(R) Core(TM) i3 processor            2nd generation Intel(R) Core(TM) i5 processor            2nd generation Intel(R) Core(TM) i5 vPro(TM) processor            2nd generation Intel(R) Core(TM) i7 processor            2nd generation Intel(R) Core(TM) i7 vPro(TM) processor            Intel(R) Pentium(R) Processor  900/B900/G600/G800 Series            Intel(R) Celeron(R) Processor 700/800/B700/B800/G400/G500 Series

  • T530 - Reset nach Upgrade auf Win 10 führt zum Crash

    Das Fehlerbild zu meinem ThinkPad T530 sich wie folgt dar: am 29.07.2015 Upgrade von Win 8.1 (ALLE Windows- und Lenovo-Updates vorhanden!) auf Win10 (über das "Upgrade Tool") > zunächst keine Problemebeginnend am Folgetag Probleme mit dem Startmenü, deshalbheute ThinkPad zurückgesetzt über das Menü "Einstellungen/Update und Sicherheit/Wiederherstellung/Diesen PC zurücksetzen"lief auch zunächst normal an; nach ca. 30 min ergab eine Kontrolle, dass der Laptop sich in einer Dauer-Boot-Schleife befand; auf dem Bluescreen wurde folgende Fehlermeldung angezeigt: "Inaccessible Boot Device", dann erfolgte immer wieder ein automatischer Neustart.Alle Versuche, über das Auswahl-Startmenü "F11 - Recover" den Laptop wieder zum Laufen zu bringen, blieben erfolglos; eine weitere Fehlermeldung an anderer Stelle lautete: "Laufwerk ist gesperrt".Weitere Daten des Laptops: ◦ThinkPad T530 ◦BIOS V. 2.64 ◦S/N PK20VR5 ◦Machine 2394 CTOHat jemand  eine Idee, wie ich das Teil wieder zum Funktionieren bringe?

    Vielen Dank auch für diese Hilfestellung.
    Mittlerweile habe ich sämtliche Adobe-Dateien, die mit allen möglichen Tools und auch der "händischen" Absuche der Registry zu finden waren vom Rechner entfernt.
    Jetzt klappt die Installation der Acrobat Pro 11. Aktuell reinstalliere ich meine CC-Anwendungen der Reihe nach, werde dann die div. AddOns reinstallieren und alle Einstellungen versuchen, wieder zu rekonstruieren. Eine Arbeit, die sicherlich Stunden dauern wird.
    Hoffe, dass die Aktivierung der Adobe-Software dann auch für alle CC-Programme und der div. AddOns klappen wird und das Arbeiten einigermaßen gewohnt zum Wochenanfang gehen wird.
    Beste Grüße
    Lutz Riefenstahl

  • HELP! Need to Upgrade to Win 7 (64) Professional

    I just bought a new Toshiba laptop A505-S69803 that came with Windows 7 Home Premium (64-bit).  Because my wife has a lot of software that can only run in compatibility mode is not supported under Windows 7 Home Premium (63), I have bought Windows 7 Professional.  However, I realized that when I bought the laptop from Best Buy, it did NOT come with any CDs/DVDs with drivers, etc.
    Since upgrading to Win 7 Pro is destructive to what ever is on the hard disk now, is it simply enough for me to:
    (a) download all the drivers off the Toshiba A505-S69803 support site,
    (b) install Windows 7 Professional (64 bit)
    (c) install the Toshiba A505-S69803 drivers
    What critical steps am I missing?
    Thanks,
    Rich

    The very first thing to do is create your Recovery Disks.  The next step is to follow the previous posters instructions. 
    The bad news is that upgrading to Professional won't change anything for you.  You still will not be able to run XP Mode on that model as the Intel T6600 processor does NOT support Hardware VT which is one of the requirements to running XP Mode.  You could install something like Virtualk Box and then do a clean install of XP from an actual XP Install Disk that you would have to purchase, but that is a lot more difficult and doesn't work nearly as well as XP Mode does. 
    If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

  • Playlists Missing After Install New Hard Drive and Upgrade to Win 7

    My computer needed a new hard drive and I upgraded from Win Vista Home Premium to Windows 7 Home Premium.
    I am trying to get my Playlists back for my iTunes in my "Administrator" user account, after reinstalling iTunes and putting my music libraries back onto my computer.
    (I had installed 32-bit Win7 OS myself, computer worked OK for about 1 day, then would not boot up; I took computer to shop, they said I needed new Hard Drive, and I gave them my new Win7 OS computer disks)
    I am confused over whether I have 32-bit OS or 64-bit OS. They recommended installing 32-bit OS, I agreed, and believed that I had 32-bit OS installed; however, Computer / System Properties state "System type: 64-bit Operating System"
    Prior to my installing Win7, I backed up the following onto my Western Digital "My Passport Essential Portable Hard Drive:"
    ("My Administrative Account"): Users / Owner / My Music
    and
    ("My User Account"): Users / Yank / My Music
    My "Administrative" and "User" user accounts contain different songs in iTunes.
    If helpful, I could describe what is in each of these 2 backed-up music folders.
    To get started, I copied both my "Owner" and "Yank" user folders in the C: User folder; however now I have "Owner," "Yank," and "Yank.Owner-Toshiba" folders in the C: User folder. I think I did this by creating a new Yank user account by creating a new account, not by my copying a folder into C: User folder. The Owner folder has a picture of a lock on the folder icon.
    Because I had trouble merging My Music folders in the Owner folder, and I was confused, I copied everything that was in the Owner folder into a new folder in the Owner folder, "NEW OWNER FOLDER." I also copied my Owner Music folder into several places in my Users / Owner folder.
    I also ended up changing the "iTunes Media folder location" several times, using iTunes "Edit / Preferences / Advanced tab / change "iTunes Media folder location". When I chose "Reset," it shows "C:\Users\Owner\NEW OWNER FOLDER\Music\iTunes\iTunes Media"
    I've also played around with "Edit / Preferences / Advanced tab / 'Keep iTunes Media folder organized' "
    When I open my iTunes, I have no playlists.
    However, when I went to my "Yank" user account and opened iTunes for the first time, the playlists associated with that account were visible.
    How do I get my playlists back on my Administrative Account, which is my main song collection and had many, many playlists?
    Thank you.

    YAY!
    I didn't try shift-start of iTunes, but I DID GET MY PLAYLISTS BACK BY FOLLOWING YOUR OTHER ADVICE:
    I went to my external hard drive, went to my backup at Users / Owner / My Music / iTunes / and searched for library.itl
    Four files with that name were found, with different dates.
    I chose the most recent, dated just a few days before I made my backup to the external hard drive.
    I copied it to my computer's hard drive into the following location:
    C:\Users\Owner\NEW OWNER FOLDER\Music\iTunes
    which overwrote the file which was located there.
    When I opened iTunes, ALL MY WONDERFUL PLAYLISTS WERE THERE!
    THANK YOU SO MUCH FOR SOLVING THIS FOR ME!
    CAN YOU IMAGINE HOW DISAPPOINTED I FELT WHEN I BELIEVED THAT I HAD LOST ALL OF THE PLAYLISTS WHICH I HAD CREATED OVER THE YEARS? Many of my playlists were composed of whole albums whose songs I had added to iTunes.
    THANK YOU AGAIN SO MUCH!

  • BIAS SoundSaver Input Level Not Working after upgrade from Win 8 to 8.1

    Have been using BIAS SoundSaver for INport software to digitize music LPs and cassette tapes to load on MP3 player.  Worked fine with Windows 8.  However, now that I have upgraded to Win 8.1, I can get sound of LPs and cassette tapes but the Input Level that controls the recording level on the software no longer functions.  My computer is an HP ENVY Phoenix h9-1355 Desktop Computer with IDT High Definition Audio CODEC. I am wondering if the problem may be with the audio drivers installed on the computer.
    This question was solved.
    View Solution.

    Hi @Alkay 
    I see that you are having sound issues after your 8.1 upgrade. Did you update to the 8.1 versions of the drivers?
    They may be found here: HP ENVY Phoenix h9-1355 Desktop PC Drivers
    Is it only the one application seeing this problem?
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Problems with printing after upgrading to Win 8.1 and/ or explorer 11

    I just upgraded to Win 8.1 and now some things I want to print are not formatted properly. I've updated the drivers and the print doctor doesn't find anything wrong. The issue I see is when trying to print a shipping label, the label components are overlapping. On another computer it is fine and prints fine. Help?

    Hi FishingGuy58,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see that you are having some printing issues since you upgraded to Windows 8.1.  So I can better assist you, Please respond with the Printer Model number.
    How Do I Find My Model Number?
    Once I have the information I can better research the issue and with any luck, come up with a resolution to this issue.
    Thank you for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Bluetooth does not work well after upgrade to win 8.1 from win 8

    System:                       Dell Inspiron 15R 5520
    Bluetooth hardware:   Intel(R) Centrino(R) Wireless Bluetooth(R) 4.0 + High Speed Adapter
                                         Microsoft Bluetooth Enumerator
    Ever since I upgraded from Win 8 to 8.1, the bluetooth has not been working well.
    The option to browse a remote folder or send a file does not work. 
    I can send a file only by opening the contaning folder, right click, and send to bluetooth, but cannot receive a file unless I go to
    run and then open fsquirt.exe .
    I have unpaired and uninstalled the devices respectively, and then reinstalled and repaired them. But this does not work .either.
    Unfortunately, I am unable to paste  screenshots of the device manager and error messages until I am verified.
    Can anyone give me a solution to this problem?

    Verify that you have the latest drivers for Windows 8.1 installed from the manufacturer's website.
    http://www.dell.com/support/drivers/us/en/19/Product/inspiron-15r-5520

  • After upgrading from Win 8 to 8.1 my DVD RAM GT80N SATA Drive is no longer working

    After upgrading from Win 8 to 8.1 my  DVD RAM GT80N SATA Drive is no longer recognizing discs. When I first put a disc in the drive runs for a bit and then stops. I've tried updating the driver but it says it has the most current driver. Under manage, it does not show any error codes and it says it is working correctly. I've looked at the regedit and it does not have any of upper and lower filters. I've tried disabling, rebooting, and reenabling. What am I missing? Another issue I've had since upgrading is that my network adapter needs reset several times a day in order to remain connected to wifi.

    Hey hvbnfrgvn,
    Thank you for the information on your HP Pavilion g7-2270us Notebook PC.
    I suggest following the steps in this document for Drive Cannot Read Discs (Windows 8).
    If your CD/DVD Drive Is Not Detected (Windows 8), follow the steps in this document.
    I hope this information helps, please keep me posted on how it goes.
    Best of luck and have a great day!
    I worked on behalf of HP.

Maybe you are looking for