ZVM Won't Reconnect After Reset

My ZVM froze on me this afternoon, stuck in the "Shutting Down" mode.
I let it be, thinking it would right itself.
Eight full hours later, it was still stuck. So I reset it.
I got a "Low Battery" warning, so I hooked it up to the charger (with the attachment thingie that also doubles as a USB connector).
But in doing so, my computer won't recognize that the ZVM is plugged in. I keep getting a "Your player is not connected" message in the ZVM Media Explorer.
Help!
(FYI: I do see the "Docked" symbol and I've also rebooted my computer)

Is the battery charging or charged. If the battery is charged do a cleanup>reboot from the recovery screen.http://forums.creative.com/creativel...ap&thread.id=3

Similar Messages

AirPort won't reconnect after wake in OS 10.6.7

My iMac will no longer reconnect to my WiFi network after restart or wake from sleep. I have to manually add my network (configured with hidden SSID so I have to type in the name and password) and then the connection is fine, until next sleep. This only affects one of the two iMacs on our home network, and only started recently. I searched these discussions and only found old threads for OS 10.4 which don't apply as the Network Preferences dialog has changed. I tried restarting the AirPort base station, turning AirPort on and off, and uninstalling Norton firewall I(which I thought might have been the culprit), all to no avail. I use OS 10.6.7, and an AirPort Extreme. The network uses WPA2 Personal security.
How can I get AirPort to reconnect after wake again? Any tips appreciated. Thanks.

It might help to reset the connection settings on your Mac using these steps one at a time until the problem is resolved, recognizing that, depending on your problem, not all of these steps will make sense:
1) Use the AirPort menu bar item to turn AirPort off, then on again.
2) Try to select your Wi-Fi network from the AirPort menu.
3) In the Network panel of System Preferences delete the AirPort item from the left column, then add it back.
4) In the same panel as (3), define a new location and see if you can make that work.
5) In the same panel, select the AirPort connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease". Note that the fix this step implements may be temporary.
6) In the folder /Library/Preferences ( _not_ <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
These steps may not help, but they'll only take a couple of minutes to try. Before you try these, if you have any special network settings on your Mac for things like DSL credentials, note all your network settings, because the latter steps will destroy them. If you got all the way to the last step, if things don't work any worse than before, you can trash the saved SystemConfiguration folder.

Magic Mouse won't reconnect after Lion upgrade

Okay, I'll lay this out as quickly and consisely as possible.
I've searched every post and site I can find and tried everything suggested, and still no luck.
I have Mac Pro with an external bluetooth dongle, Magic Mouse, and I have just upgraded to OSX 10.7 Lion.
My Magic Mouse has always reconnected flawlessly to my machine after booting or waking, but after upgrading to Lion, it refuses to re-pair after booting or waking. In bluetooth preferences, I can see in the Devices pane that "Steven's Mouse" is disconnected, but every couple of seconds this will flash green and show "Connected" - but only for a half second - and then it's back to "Not Connected".
I've set BT setup assistant to open on startup, and only when I have manually deleted and re-paired my Magic Mouse using the keyboard does the Magic Mouse connect.
Then sleep and wake and I'm back to square one.
I have:
Restarted after trashing every bluetooth .plist file (~/Library/Preferences and also HD/Library/Preferences) - and bluetooth drivers
Sone several SMC Resets
Zapped my PRAM
Made my mouse a 'Favorite'
Deleted and re-paired it more times than I can count
Turned the mouse on and off
Clicked it
Double-clicked it
Kept clicking it
Turned it on and off
Triple-checked the batteries
Tested my mouse with another machine running SL
Tested another mouse with my machine
- All with no luck whatsoever. I'm about down to writing a suicide note or something!!!
Any help would be appreciated.
Steven
(BTW I'm 100% sure the issue is within the Lion system somewhere - not my hardware.

Hi, I had the same problem but it's fixed now. It seems that the order you turn mouse and bluetooth off and on makes the difference. This is what worked on my macbook pro (eventually!):
turn off bluetooth and mouse. Turn on bluetooth. Open system preferences. Open mouse. It starts searching. then Turn on mouse. Hey presto! (and much to my surprise) it found it.
It also worked if I left the mouse on, and turned it off and on after opening the mouse in system preferences and it had started searching. But if, for example, I turned on the mouse before opening system preferences,it was no go.
There is another issue: I (like I suspect a lot of people) switch between lion and snow leopard (Macbook Pro and Mac Mini respectively), and every time it has to be paired manually. I have found I have to use the entire process shown above with both OSs.
Also, the mouse has to be paired to Lion at every startup. I never have to re-pair the mouse with Snow leopard on startup (unless it's been paired to Lion in the meantime!).
I hope that some of this might help someone, even just a little.

IPhone 5 won't start after reset

Hi All
After doing a reset of iPhone 5 it will not start - has a black screen with a white apple logo.
Wont turn off, and still the same doing a hard reset.
Help please!!
Thanks

Hey mdmcholet,
That sounds frustrating, your iPhone 5 only displays a white screen with an Apple logo. Take a look at the article linked below, it provides troubleshooting suggestions that’ll most likely resolve the issue.
iOS: Not responding or does not turn on - Apple Support
Cheers,
-Jason

WPSM54G won't reconnect after printer being shut off and back on.

I have a HP Deskjet 2510. It prints well untill I turn the printer off and got to use it the next time. When I turn it on the USB light on the router doesn't even light up. I have to unplug it and plug it back in then it works fine untill next time. The printer is hooked up thru an ethernet connection for 1 computer and wirelessly for another. Same problem with both computers. Any help?
Solved!
Go to Solution.

whetsel.m wrote:
Uninstalled and reinstalled software for both the new printer and printserver. Still same problem. Printserver won't automatically connect when printer is turned back on. Removed Ethernet cable from print server. Still same problem.
It might be firmware is already old. Make sure printserver’s firmware is updated. Reset and reconfigure.
Title: Upgrading the firmware of a WPSM54G Article ID: 17164http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=de1a87fe3d624ce780f2c804de247ac4_17164.xml&pid=80&...
Title: Setting-Up the PrintServer Article ID: 5032http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=59c0e1ff7adc408094106ce4f8688902_5032.xml&pid=80&r...

Airport Express won't reconnect after Airport Extreme is rebooted

So my problem is this. The whole system is made up of 2 "old" Airport Expresses, 1 brand new Airport Express and an older Airport Extreme. I have the two older Airports set up to "join" the network and have one hooked up to my printer and one to my pool computer. I then setup the new Express to "extend" the network to cover more of the house. This all works great when I first set it up. The problem comes when I have to reboot the Extreme. When I do this, the new express will not reconnect to the network but just flashes amber until I unplug and replug it. The old ones reconnect and go back to green with no intervention at all. I tried setting up the new express as both "join" and "extend" and in both cases it will not reconnect to the Extreme unless I power cycle it. Why am I having this issue with the new one, and the old ones work just fine. Is there a setting I need to adjust on the new one or on the Extreme or ...
NO security, just a hidden SSID.
Thanks

Redo the setup of the express.. I am not quite sure I am following the problem but you are better setting a new wireless name rather than use the default. Did you also set security on to WPA2 Personal with a decent password?
If the MBP that has issues was recently updated to 10.8.5 it might need an SMC reset.. also check if your model laptop has a SMC upgrade as there are some wireless issues around.
SMC reset
http://support.apple.com/kb/HT3964

New iPad won't activate after resetting

iPad won't activate thru iTunes after erasing all content and settings. iPad is back at the Welcome screen like when it was new, but go thru iTunes to set it up and no activation.

Can't activate by signing in.
I can't even get to that point. After I enter a wifi password the iPad goes to activate and that's where everything stops with: Can not activate a this time. Please try again later. I've tried a million and 6 times, there is no later...
Also noticed that the serial# listed for the iPad in iTunes is N/A. After a few minutes of trying it gives me the above message. It also shows a lock near the message in iTunes. This shows that somehow the iPad is still locked after I erased all data and wanted to completely start from scratch?

MacBook won't boot after resetting memory

Hi
In preparation to upgrade my MacBook's RAM to 2 or 4Gb I took out the existing RAM to see what I had and then replaced it. Now my Mac won't boot properly. It's a dual partion disk (OS X and Vista) and I can boot and run the Vista partition AOK. I can also boot from the Leopard install disk.
When I boot into the Mac partition I get the Apple sign and the spinning pinwheel, then the screen goes light blue and it stops - no mouse, no dock, no nothing. I have to press and hold the power button to switch it off.
In Vista and when booting from the install disk I can run utils that show me clearly there are two 512Mb memory cards installed.
Anyone have any ideas?
I do have a time capsule and time machine running in worst case...
Thanks
Colin

Hmm... so all you did was take out your RAM and put the same RAM back in? Something may have become corrupt in your PRAM. You can find instructions on how to reset it here:
http://support.apple.com/kb/HT1379
It can sometimes help with problems like this. Also... even though Vista sees both modules, that does not necessarily mean they are fully seated. You may want to try removing them and putting them back in to see if it makes a difference.

Ipod Classic Won't Start After Reset

My Ipod classic stopped working recently so i attempted to reset it but when i did the apple icon came up for a few seconds then a screen with a red cross with a circle around and just said "www.apple.com.support/ipod" if someone could help me out i'd really appreciate it

I am currently experiencing the same problem on my 80gb iPod claissic. anyone have an idea how to undo this?

IMessage won't reactivate after resetting phone

Ok, so my phone and I had a bit of an adventure today. I left it at a restaurant by mistake and located it with Find My iPhone, and remotely erased the device (could've just locked it, but I was extremely anxious about the fate of my phone at the time). Once I got it back, I restored it with a backup, everything went normally, etc etc.
Except that now, iMessage & FaceTime are stuck on "Waiting for activation..." and when I tap the "Use your Apple ID for iMessage option" and enter my Apple ID/password, I get an error saying that my phone couldn't connect and to check network settings and try again. For clarification: I had to enter my ID info about a half-dozen times in the restoring process, and to log in to this website, so I know the password is correct. I have full wifi & 3G reception (have tried logging in on both), and email, Safari, social media apps - everything else I can think of - is working perfectly fine. This is driving me nuts. I tried restoring the phone one more time, turning airplane mode on/off, everything Google could offer me as a solution, and I've still got nothing. Any help is greatly appreciated, as I don't feel Apple really deserves $29.99 to help me fix a problem that I'm pretty sure isn't my fault.
Oh: And my software is up to date.

Here I am to save the day mf1831! Let's get your iMessage working. May I ask are you logged into your iPhone 5s with your Apple ID? If not then simply go to Settings > iTunes & App Store. Also, go to iCloud in Settings to ensure that you are logged in there as well. Once you are logged in go to Messages and verify that iMessage is turned on. Also, please verify the Send & Receive info under Messages to ensure that both your mobile number and Apple ID is checked under "You Can Be Reached By iMessage At". Please let us know the results after you have peformed these steps.
Thank you…
ArnettH_VZW
Follow us on Twitter @VZWSupport

Bluetooth Keyboard won't reconnect after reboot

I have a new Macbook Pro (early 2008 model) that keeps losing my bluetooth keyboard everytime I restart the Mac. I have to either Browse devices and turn the keyboard on and off (I put new batteries in the keyboard recently, so I don't think that is the problem) or else I have to set the keyboard up again from scratch as a new Bluetooth device. Once I get it working again it works fine until I restart.
This is getting tedious.
Anyone else having this problem?

Hiya I would advise to try and reset SMC on your MPB and see if it helps.
Instructions are in this article: http://support.apple.com/kb/HT1411

MBP won't boot after resetting SMC for being stuck in sleep.

Last night I closed the lid and put my mbp into sleep. Today my mbp was stuck in sleep with the light stuck on and the battery indicators were not functional so I reset the smc. This fixed the stuck in sleep problem but now it will not boot at all.
Any help is appreciated.

Start all over with 10.6, make sure to erase the ENTIRE drive in 10.6's disk utility
use the security option > zero as instructed
How to erase and install Snow Leopard 10.6
Erase, formatting, OS X installs on Mac's
Software update to 10.6.8,
Once your on 10.6.8, the log into AppStore, option click on purchases and reinstall 10.8 if you wish.

OS won't start after PRAM reset

I was having problems with my battery, so I tried to reset the PRAM to see if that would help, but now I have a whole new issue...When I try to start up my computer, I get a circle with a slash through it (a symbol that usually means 'no'). This shows up right after the apple logo when I try to start up my laptop.
I used disk utility on my installation cd to check if there was a problem with my hard drive, but it said it was ok.
What did I do? Do I have to reinstall my OS, will that even help?
Thanks for you help.

Hi bluesunset,
First of all, Welcome to the  Discussion Forums!
See if this  doc might apply:
Computer won't startup after resetting PRAM
post back with comments or questions,
littleshoulders

My MacBook Pro won't reconnect to my Wi-FI automatically after waking from sleep mode

Hello, everyone. Since I updated to Yosemite, my MacBook Pro won't reconnect to my Wi-FI automatically after waking from sleep mode.
Does anyone know how to fix that?
Thanks in advance,
Arthur.

Hi, arthurpacifico.
Thank you for visiting Apple Support Communities.
Here are a couple troubleshooting steps that I would recommend trying to see if it corrects this issue.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Reset your computer’s PRAM
http://support.apple.com/kb/HT1379
If the issue persists, try the troubleshooting steps I have attached below.
Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
After waking from sleep or starting up, your computer may not show that it is connected to a Wi-Fi network.
After start or wake, your computer may indicate that it is connected to a network, but does not connect to the Internet.
Solution
Use these steps if your computer does not automatically connect to your desired Wi-Fi network.
Check your TCP/IP settings in the Network pane of the System Preferences. Click the "Renew DHCP lease" button
Choose System Preferences from the Apple menu.
Choose Network from the View menu.
Select Wi-Fi, then click the Advanced button in the lower-left hand corner of the screen.
Click the TCP/IP tab from the top of the screen.
Click the "Renew DHCP lease" button.
Select the Wi-Fi tab and view your Preferred Networks list.
Select each network and click the minus sign to remove those networks from your Preferred Networks list.
Click OK and close the Network preferences.
Remove your stored network passwords using the Keychain Access Utility.Restart your computer.
Open Keychain Access from /Applications/Utilities. Your window will look like this:
Remove your AirPort network passwords from the login keychain: Select the "login" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".
Remove your AirPort network passwords from the System keychain: Select the "System" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".
Note: The above steps will remove your Wi-Fi network passwords. If you do not know them, or if your network does not use passwords to restrict access, you should contact your network administrator.
Join your Wi-Fi network. You will need to enter your password for your network again if it requires one.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/ht4628
Cheers,
Jason H.

Even after resetting apple id password still won't activate my phone

I did a reset erase all contents and settings but i'm stuck at activation lock! The iphone is mine and email is correct but even after i reset my password, IT STILL WON'T ACCEPT THE NEW PASSWORD :(( please help! Thank you.

moniiice
Re: Does reset all content and settings automatically sets Find my iphone off?
Jan 27, 2014 8:54 AM (in response to KiltedTim)
But when i sign in my icloud account on the activation lock, it still won't accept it. Even if i tried resetting my password. I believe that i use the right icloud account but still it won't activate it. I tried locating my device on find my iphone and the device was not there, does it mean my device has already been erased?(i resetted all content and settings) but why does it still have an activation lock after reset? Tried everything but still no luck :( reset apple id or password but still nothing :(

ZVM Won't Reconnect After Reset

Similar Messages

Maybe you are looking for