Zwei iPod touch via bluetooth verbinden/Connecting two iPod touch via Bluetooth
Hallo,
ich möchte, um das Spiel Shrek Kart im Mehrspieler-Modus zu spielen, zwei iPod touch mit bluetooth verbinden. Leider finden sich die Geräte gegenseitig nicht.
Wer kann mir helfen?
Danke!
Hi,
I would like to play the Shrek Kart Game in the multiplaye modus. Therefore I have to connect my two iPod touch via bluetooth. Unfortunately they don`t find one another.
Who can help?
THANKS!
Ipod Touch Via Bluetooth wrote:
so the only was is to use the cable to connnect it from my notebook to Ipod touch??
depends. for syncing and software updates: yes.
for putting e.g. MS Office files or .pdf files on it: check out e.g. _*Flash Drive*_ or _*Documents To Go*_. both require a wi-fi connection, though.
what about if I download any bluetooth program from the App Store ( For Example: iBlueNova ).
searching the app store for iBlueNova did not bring up anything for me. instead, search for +bluetooth fileshare+. maybe that app is for you ...
JGG
Similar Messages
-
Connecting two iPods to computer at same time
Question: Am I able to connect two iPods (Nano and Shuffle)to my computer at same time? I would want to do this to mainly charge the batteries to these units. My computer has a four high-speed USB connections and I would like to know if this is possible and/or advisable. Thanks very much.
I'm not sure if you're able to use both at the same time (for data transfer)... You should, however, be able to use both for charging.
If you eject the iPods it shouldn't be a problem to use more than one at the same time. To eject the iPod in iTunes you would go to the iPod in the source list (on the left, under library, podcasts, etc.) then click on the little eject button, it'll stop being recognized by the computer so it should work.
I hope this works for you, if not, just update and I'll try to help more.
Good Luck,
Joey. -
Hi, my ipod (2nd gen) won't connect to the internet via Safari or through apps but my email does work. Any ideas without needing to reset the ipod?
- Have you tried when connected to other networks? Maybe the router is blocking the ports used by Safari and the other apps.
- What kind of network are you using? a personel or bussines? -
Is possible to connect two i-phone4 with bluetooth?
Is possible to connect two i-phone4 with bluetooth?
For what reason. Some apps were made to interact with another iPhone with the same app running over bluetooth.
All info is in the manual if you mean for other reasons.
http://manuals.apple.com -
How do connect two iPods at once.
Hello, I have two iPods that I connect to one computer (1 a 5th gen ipod, and 1 a 4th gen ipod).
I can only ever connect one of the two iPod's. When ever I try and connect a 2nd iPod, iTunes disconnects the 1st iPod, and only shows the 2nd iPod, and this then gives a windows error on the 1st iPod.
Has anyone ever been able to connect two iPods at once in itunes for Windows?i have the same problem. With one ipod and another ipod nano, the itunes doesnt works, and need to restart it.
-
Connecting Two Airport Express Via Ethernet
I have a unique situation in which I would like to connect two airport express via ethernet. Here is the situation: I can connect the first AX directly to the internet and set up a WDS for the second AX. Unfortunately, the second AX signal does not reach where I need it to go. I can run an ethernet cable between the two. Is this setting valid for a WDS? Or does the WDS have to be wireless? If I can set up the WDS using an ethernet, will the relay AX broadcast the internet wirelessly then?
Are there any specific settings I should know about?
Any help would be great.
Thanks in advance,
DebbieI currently have an old snow basestation at this location. Can I plug an ethernet cable into it and connect it to the AX?
Yes that will work.
My understanding was that the older basestation could not do this?
I think you have it confused with extending a network wirelessly. That is not possible with the snow AirPort base station (ABS). -
it is possible to connect two ipod nanos to the PC to transfer music or videos from one to one???
i have ipod nano 4G
and my friend has ipod nano 3G
waiting your reply.You can connect two iPods to the one computer, yes. However, you can't take files from an iPod and put it on another computer or iPod normally. There are some programs that allow you to take the files off an iPod and put them on a computer, but I don't think you can transfer directly from iPod to iPod.
To connect the two iPods to the one PC, you need the connector cable for both of them - one cable will not do. The cable is white, and it has a USB and an iPod connector. It's the cable you use to connect the iPod to your PC normally. Put both of the cables in a different USB slot, and you're set.
If one of the iPods is not 'registered' to the correct computer, you can click the 'Cancel' button and keep the iPod plugged in. I hope you understand what I mean.
I've never used a program to get files from the iPod to a PC, but I know of a couple. Here's a list of a few names I know :
Xilisoft iPod Rip
iPodCopy
4Media iPod to PC
You can find those three on Cnet's Download website (http://www.download.com). They're all for Windows - I never checked if you have a Mac. I don't think any of them are free, but I didn't check. -
Both of my kids have an iPod Touch. Can I have two iPods registered on the same email account or do I have to create a new email account for the second one?
There is some info in this discussion.
https://discussions.apple.com/thread/6024120?tstart=0 -
I am trying to connect an iPod touch (4th Gen; ios6.1.6) with an iPod touch (5th Gen; ios8.2) but they are not detecting each other. I have re-started both devices and reset the network settings. In both cases the result was the same and neither device could detect the other. Is there an incompatibility between Bluetooth 2.1 and 4.0? If not, what other options do I have to get them to detect each other?
Hi Barry,
My son has a game (that has a "local play" feature) that he wanted me to play with him. He's got the iPod 5th gen and I was going to commandeer his older brother's older iPod to play along. If it isn't supported, I might have to try my wife's iPad and see if that will work. Or, maybe just get myself an iToy of sorts!
Thanks for you quick response! -
How can I connect two ipods on the same computer ?
Hello,
My girlfriend has just bought a ipod nano. I have already a "classic" ipod. Do you know how can I connect the two Ipod on the sasme computer without loosing all my songs ? Is ti possible to select songs that she will transfer ?
Thanks for your answerI am trying to contact a Nano to the same computer that has a Shuffle and Mini on it but it just doesn't want to update. I have been sitting fr about 3 hours now trying to make it work and cannot get anywhere. Can ANYONE help?
Thanks.
Do Apple not have an online help service? It seems a little strange for a company so large. -
Connecting two distant servers via a common WAN Internet connection.
Hi all,
I have two servers located in two different countries. For example Server A (Windows 2003 with Active directory) is located in Singapore. Another Server B (also Windows 2003 Server with Active Directory) is located in Kuala Lumpur. Both computers are connected to Internet via local ISP (WAN connection with dynamic IP) to respective countries. There is few local users at each places which are connected to local servers at both places with LAN.
I would like to connect these two servers togather via WAN (Internet- may be tunnelling, VPN, I don't know much what are other technologies) My objective is to connect both Server A and Server B so that I can keep track of active directory information, user management and authentication. Please let me know how can I achieve that? What are needed and what configuration and addition device, server needed. Please give me simple, detailed cost effective methods.
Thanks.First you want to get static IP's and then you can setup an IPSEC tunnel or site to site VPN. Then you will want to creat a trust between the 2 domains if they are in different forests. Then you can add your user account to a universal group (forest functional level must be at Server 2003 level) for enterprise management.
James Goodwin - Senior Technical Instructor & Network Infrastructure Expert
MCT, MCP+ I, MCTS:Server 2008, MCTS: SCCM, MCTS:Vista
MCSA:S, MCSE:S, MCITP:SA, MCITP:EA , MCITP:ES, CCNA,
CCSI(# 32018),C|EH, C|HFI, C|EI, HDSA, A+, Network+, i-Net+, Server+, Security+
My Blog:http://thattrainerguy.blogspot.com/ -
Connecting two EA6500 routers via wireless bridge
Hi, I want to know how can we bridge two EA6500 routers via wireless. I do not want to use the lan cable. Please help.
Thanks,
anandpThis setup is not possible. You can only cascade the routers via wired connection. The access points on these routers are mainly transmitters, they're not receivers so you can't associate them wirelessly. You can, however, get a wireless bridge to do the job. Check out the Dual Band N Entertainment Bridge WET610N and Wireless N Universal Media Connector WES610N.
-
How do I connect two ipod's to one computer
I own an 5th Gen IPOD, I am buying my wife a Nano for Christmas. How do I connect both to the same computer, yet keep the ITunes and therefore IPOD update seperate?
IPOD 30GB Windows XPSee these articles about using more than one iPod on one computer, and with either one or more iTunes libraries.
Multiple iPod installations.
How to use multiple iPods with one computer. -
Can I connect two actiontec mI424wr via coax?
I have a new addition in my home, with an home entertainment area with poor reception from my current actiontec router. I have acquired a second Actiontec off eBay that I want to connect to my coax in the new addition so I can add some "wired" ethernet connections to the xbox, sling, blu-ray etc. I have seen many posts about a MOCA bridge, but I am not sure that is really what I a trying to do. I have an existing Actiontec, that is controlling the menus and VOD for my TV service. I just want to connect the second router via coax so I have faster and reliable internet in this new addition as well. Help! I am somewhat technically savvy, and can follow config instructions, but not a networking expert. Thanks.
The MoCA bridge is exactly what you want. While you can reconfigure the second ActionTec to essentially act as a MoCA bridge (there are links here on the forum as well as DSLreports on how to do it), I would encourage you to just go with the bridge as it's much simpler (there is no configuration required).
Simply install the MoCA bridge (ActionTec HME2200/ECB2200) and connect it to an active Coax connection in your addition. It will pair with the primary ActionTec router elsewhere in the home. Then, if you have more than one device that needs connected, get a small switch (not router) online -- should run you less than $20 for a 5 or 8 port unit -- and connect it to the MoCA bridge and all of your devices -- again, no configuration required.
If you decide you really want to use the router instead, you essentially need to disable all of the WAN interfaces (so it doesn't fight with your primary router trying to get an internet address) and then disable the LAN features such as the DHCP server so that it essentially acts as a MoCA bridge with 4 port switch. -
Connecting Two ASAs together via local interface
Hi
I have two cisco ASA routers & wish to connect them together so that traffic between is permitted with out going outside interface.
Two asa are located at in ONE office and two have separate internet connection (ISP) configured.
So here is what I did so far.
configure one of the interface on each ASA with some IP adddress.
ASA 1 ------- interface 0/6 10.1.1.1 (ASA X 1512)
ASA 2 --------- interface 0/5 10.2.2.2 (ASA 5055)
now connected a Ethernet cable to these inferface.
I was able to addd a route on asa 2.
route add interface0/5 10.1.1.0/24 10.2.2.2
but when I add route on ASA 1 I get the following error.
route add interface0/6 10.2.2.2/24 10.1.1.1
%invalid next hop address it belongs to one of our interface.Sorry if I was not clear
I have two separate ISPs connecting two two separate ASAs.. Two asa are now connecting separate LANs.
Now I want to communicate between LANs.
So I connected an ethernet cable bw ASAs and trying to configure the route.
But not able to establish
Here is the configuration of ASA where I am faceing problem, while trying to add route
route add voice-interface 10.1.1.1/24 255.255.255.0 10.2.2.2 1
I get error says
route already exsists
interface GigabitEthernet0/0
nameif outside0
security-level 0
ip address 0.2.5.2 255.255.255.252
interface GigabitEthernet0/1
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/2
nameif inside2
security-level 100
ip address 192.168.1.1 255.255.255.0
interface GigabitEthernet0/5
nameif voice-interface
security-level 100
ip address 10.1.1.1 255.255.255.0
object network NETWORK_OBJ_12.1.3.0_2
subnet 12.1.3.0 255.255.255.0
object network NETWORK_OBJ_192.168.1.0_24
subnet 192.168.1.0 255.255.255.0
object network OBJ_ALL_NETWORK
subnet 0.0.0.0 0.0.0.0
description Any Network
object network voice-asa-network
subnet 10.2.2.0 255.255.255.0
object network 10.1.1.1
host 10.1.1.1
access-list outside0_cryptomap extended permit ip 192.168.1.0 255.255.255.0 12.1.3.0 255.255.255.0
access-list inside2_access_in extended permit ip 192.168.1.0 255.255.255.0 any
nat (inside2,outside0) source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static NETWORK_OBJ_12.1.3.0_24 NETWORK_OBJ_12.1.3.0_24 no-proxy-arp route-lookup
object network OBJ_ALL_NETWORK
nat (any,outside0) dynamic interface
route outside0 0.0.0.0 0.0.0.0 0.2.5.2 1
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transport
crypto ipsec security-association pmtu-aging infinite
crypto map outside0_map 1 match address outside0_cryptomap
crypto map outside0_map 1 set pfs
crypto map outside0_map 1 set peer 9.2.5.1
crypto map outside0_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside0_map 1 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map outside0_map interface outside0
crypto ca trustpool policy
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
threat-detection basic-threat
threat-detection scanning-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ssl encryption aes128-sha1 3des-sha1
group-policy GroupPolicy_6.2.5.1 internal
group-policy GroupPolicy_6.2.5.1 attributes
vpn-tunnel-protocol ikev1 ikev2
class-map inspection_default
match default-inspection-traffic
Maybe you are looking for
-
How can I get a microphone that works on windows to work on Lion?
I have just recived a headset I ordered off eBay. : http://www.ebay.com/itm/380536763585?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m143 9.l2649 I have a windows laptop, and I plugged in the 3.5 mm jack for the microphone, and it works fine. If I go on m
-
Discoverer 3.1 with Oracle 10g
Hi All, I want to use Discoverer 3.1 against Oracle 10.1.0.4 Database and Oracle 10.1.2.0.2 Application Server. This is a temporary solution only, since a client urgently needs to run his Discoverer reports. The operating system of the client machine
-
Where to start w/ J2EE... EJB
I've been practicing Java for some time now and noticing the changes and how J2EE is being pushed. What I want to know is where do I start with J2EE1.3? I want to build a trial application using EJB with CMP. I downloaded orionserver which states tha
-
Servlet hangs out when web app. first loads
I was trying to prepare a servlet which is loaded when the web application first starts on the server. It was loaded when I try the project but it hung out and the first page on the site had never shown; it seems like it is loading the the first page
-
SCF and Application sharing server
Hi, When reading the installation guide of KM and collaboration room, I've seen that there is an application sharing server that is also installed but I've find which application it hosted. Is it the host for Synchronous Collaboration Framework ? Doe