ZX_TAX_RATE_NOT_EXIST when importing lease payment invoices from Assets

All,
I am on 12.1.2
I have created a lease agreement in oracle assets and run the export lease rentals to payables program.
Then, I ran the "Payables Open Interface Import" program.
The invoices fail import with error "ZX_TAX_RATE_NOT_EXIST - This Tax Rate does not exist".
I have not given any tax code for the lease or the invoice. Also have checked the supplier master and there is no tax setup.
Please advise.
Thanks,
Vishal.

Hello JD
I had read that note earlier. It says "The tax rate specified on the imported tax line does not exist. The provided tax rate should be existing to get processed".
As i mentioned, my invoice does not have any tax line. So I am not sure why this error msg is coming.
Thanks Vishal.

Similar Messages

  • DTW Error when importing Incoming Payments-Invoices (RCT2).

    Hi Experts,
    I have imported invoices through DTW and they currently have the status 'Open'. I have tried importing Incoming Payment records but DTW gives me the following error: 'Base document card and target document card do not match'.
    After importing the invoices i ran the query for OINV and used the Internal Number / DocEntry for these invoices, in the RCT 2 table. (I read some where that its this DocEntry that will link Invoices and Incoming Payments). I have filled the DocEntry field in both ORCT and RCT 2 templates but am still getting the same error.
    Kindly assist.
    David.

    Hi, any luck fixing this issue?
    Im dealing with the same problem here.
    Thanks,

  • Customer Down Payment invoice (from delivery) not automatically assigned

    If I create a Down payment invoice from Sales Order (and I paied it) on the final invoice the sistem automatically assigne the down payment invoice on the final invoice for the order.
    If I do the same think but crerating the Down payment invoice from the delivery (and I paid it) when I create the final invoice I need to assigned it manually.
    SBO 8.81 PL 06
    I haven't found any set up for this, so I think is an error the sistem must work on the same way if the document is copied from the Sales order or delivey.
    Someone know if there is some set up? or I need to open an error message to SAP?
    Thanks

    My question is:
    If I make a sales order.
    I create a down payment invoice using copy from SO.
    I make the incomuing payment for the down payment invoice.
    I create the delivery from the SO
    I create the invoice from the delivery
    The system apply automaticaly the down payment invoice to the invoice (because I select a delivery that is linked to the so that I used to create the down payment invoice).
    If I make a sales order.
    I create the delivery from the SO
    I create a down payment invoice using copy from delivey.
    I make the incomuing payment for the down payment invoice.
    I create the invoice from the delivery
    The system DO NOT apply automaticaly the down payment invoice to the invoice (even if also this document is linked to the delivery that I use to create the down payment invoice).
    I know that I can select it manually. But I can select it manually also if I use the SO to create the down payment instead of the
    delivery. Why if the situation is the same in the firs case the system do it automatil^cally and in the second case I need to do it manually?
    Of course if I create a Down Payment invoice without selecting any document (SO, delivery..) the system don't know if you want to apply the payment to the final invoice.
    But If I select the delivey to create the down payment (the same if I select the SO): I want to apply the down payment to the final invoice of this delivery and not to another delivery.

  • When importing an MXF file from a CF card, I can only get :30 of the original clip. What am I doing wrong?

    When importing MXF video file from a CF card to Final Cut 6, I can only import :30 of it. Why am I limited to :30 and how do I get the entire clip?

    That's the WRONG WAY!  You have to use Log and Transfer, like Michael says.  Here's A tutorial on how to deal with Tapeless in FCP
    <a href=http://library.creativecow.net/ross_shane/tapeless-workflow_fcp-7/1 target=_blank>Tapeless Workflow for FCP 7 Tutorial</a>
    BUT NOTE!  If this is MXF from a CANON camera...their new 305 camera...you not only need a plugin to get it to work (they either include it with the camera, or you have to go to the website... the Canon Log and Transfer plugin), it also might only work with FCP 7.  Because the camera is brand spankin new.  Try the plugin first...well, if this is from that Canon camera.

  • When importing files into fcpx from go pro hero2, some are importing as .mov and some as .mp4. when making a multi cam clip it will only add one type, if you try and add the other it says camera clip cannot be processed.

    when importing files into fcpx from go pro hero2, some are importing as .mov and some as .mp4. when making a multi cam clip it will only add one type, if you try and add the other it says camera clip cannot be processed. need to figure out why it randomly imports differently, or how to add different file tyoes to multi cam.

    here is one that is imported and stays .mp4. the specs are same as original file before import.
    here is one that has changed somehow during import. specs on original file are same as above, but once it is imported it changes to this in event folder, and others randomly keep the above specs.

  • Zero BED value when posted J1IIN excise invoice from billing document

    Hi Guys,
    I created VA01, VL01N and VF01. Bed value is showing in VF03 but when I created J1IIN from billing document, BED value is zero. I checked several places like below
    a) Logistics-General > Tax on Goods Movements > India > Account Determination > Specify Excise Accounts per Excise Transaction. Here ensure that for DLFC, necessary Account names are maintained.
    b) Similarly, in the next tab, Specify G/L Accounts per Excise Transaction, ensure that for that Excise Group, relevant G/L Accounts are assigned
    c) Finally, in Business Transaction tab, select Outgoing Excise Invoices where you need to ensure that you have assigned billing type to delivery type and also the default Excise Groups and Series Groups are maintained.
    I couldn't figure it out where the problem is. Please help me where to check and what should be done for this?
    Thanks,
    Manohar.

    I maintained excise defaults for TAXINN, I am maintaining A/R BED % which is coming in billing document but not in J1IIN. When I click on simulate it is giving a popup box saying 'No defaults could be proposed for Excise utilization' and click on continue then it is giving another message saying 'Excise modvat accounts not defined for GRPO transaction and E2 excise group'. Please help me what is it?
    Thanks,
    Manohar.

  • Error when importing a web service from ES Workplace to NWDS

    Hi guys,
    I'm working with SAP NetWeaver Developer Studio (SAP NetWeaver 7.1 Composition Environment SP03 PAT0000 Build id: 200710302120)
    The connection (through Services Registry) to the ES Workplace was successful. I found the service definition and the endpoint for the selected service definition I wanted. But when I clicked "Finish", I got a "Web Service Import Error":
    Web Service can not be imported due to some errors.
    java.lang.reflect.InvocationTargetException
    java.lang.NullPointException
    error detail:
    java.lang.reflect.InvocationTargetException
         at com.sap.caf.designer.ui.actions.es.WSImportAction$1.run(WSImportAction.java:188)
         at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:113)
    Caused by: java.lang.NullPointerException
         at com.sap.caf.foundation.mfw.types.CoreTypes.getAllTypesForApplication(CoreTypes.java:353)
         at com.sap.caf.foundation.mfw.types.CoreTypes.initializeCoreTypes(CoreTypes.java:197)
         at com.sap.caf.foundation.mfw.types.CoreTypes.getType(CoreTypes.java:227)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.getBuiltInSimpleType(WSImportManager.java:849)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createSimpleType(WSImportManager.java:712)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createSimpleTypeWithRestrictions(WSImportManager.java:883)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createSimpleType(WSImportManager.java:728)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createAttribute(WSImportManager.java:663)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createField(WSImportManager.java:1059)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createFields(WSImportManager.java:1046)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createComplexType(WSImportManager.java:967)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createAttribute(WSImportManager.java:671)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createField(WSImportManager.java:1059)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createFields(WSImportManager.java:1046)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createComplexType(WSImportManager.java:967)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createAttribute(WSImportManager.java:671)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createField(WSImportManager.java:1059)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createFields(WSImportManager.java:1046)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createComplexType(WSImportManager.java:967)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createAttribute(WSImportManager.java:671)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createMessage(WSImportManager.java:630)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createInputMessage(WSImportManager.java:605)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createOperation(WSImportManager.java:569)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createOperations(WSImportManager.java:518)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.importInterface(WSImportManager.java:495)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.importWebService(WSImportManager.java:265)
         at com.sap.caf.rt.connectivity.ImportManager.importWebService(ImportManager.java:53)
         at com.sap.caf.designer.ui.actions.es.WSImportAction$1.run(WSImportAction.java:180)
         ... 1 more
    java.lang.NullPointerException
         at com.sap.caf.foundation.mfw.types.CoreTypes.getAllTypesForApplication(CoreTypes.java:353)
         at com.sap.caf.foundation.mfw.types.CoreTypes.initializeCoreTypes(CoreTypes.java:197)
         at com.sap.caf.foundation.mfw.types.CoreTypes.getType(CoreTypes.java:227)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.getBuiltInSimpleType(WSImportManager.java:849)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createSimpleType(WSImportManager.java:712)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createSimpleTypeWithRestrictions(WSImportManager.java:883)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createSimpleType(WSImportManager.java:728)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createAttribute(WSImportManager.java:663)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createField(WSImportManager.java:1059)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createFields(WSImportManager.java:1046)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createComplexType(WSImportManager.java:967)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createAttribute(WSImportManager.java:671)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createField(WSImportManager.java:1059)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createFields(WSImportManager.java:1046)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createComplexType(WSImportManager.java:967)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createAttribute(WSImportManager.java:671)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createField(WSImportManager.java:1059)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createFields(WSImportManager.java:1046)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createComplexType(WSImportManager.java:967)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createAttribute(WSImportManager.java:671)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createMessage(WSImportManager.java:630)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createInputMessage(WSImportManager.java:605)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createOperation(WSImportManager.java:569)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.createOperations(WSImportManager.java:518)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.importInterface(WSImportManager.java:495)
         at com.sap.caf.rt.connectivity.ws.WSImportManager.importWebService(WSImportManager.java:265)
         at com.sap.caf.rt.connectivity.ImportManager.importWebService(ImportManager.java:53)
         at com.sap.caf.designer.ui.actions.es.WSImportAction$1.run(WSImportAction.java:180)
         at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:113)
    Thanks in advance
    Wenhao

    Hi Wenhao,
    I did face something similar ....but when i tried it again...it worked..
    In case it does not then before u try to start the procedure to dwnld the Enterprise service wsdl....
    uncheck the wsdl validator check box in NWDS...
    I suggest u first try to consume the wsdl by importing it locally...
    just follow this blog by Boris step by step..
    /people/boris.mohr/blog/2007/01/23/how-to-guide-for-consuming-a-web-service-with-a-standalone-client-using-sap-netweaver-application-server-javatm-ee-5-edition
    Once u r able to do this..then u can try to consume it from service registry
    Edited by: Mohd Tauseef Ibrahim on Jun 26, 2008 2:28 PM
    Edited by: Mohd Tauseef Ibrahim on Jun 26, 2008 2:30 PM

  • Photos become blurry when imported to FCP X from iPhoto

    I'm using FCP X.  I have imported 18 high quality photos from iPhoto into my timeline.  When I play my sequence the photos appear blurry. 

    Do you have an orange render bar? If you do, Control-R will render selected clips and Shft+Control R will render all.
    Russ

  • Excluding Block for Payment Invoice from Correspondance list in F.62 tran

    Hi All,
    My requirement is Excluding those invoices for which Payment Block indicator is 'P' from Correspondance List in Transaction F.62 for SAP11 Variant. i.e. BSEG-ZLSPR = 'P'.
    Kindly advise me is there any BADI or User Exit or any other possibility to do the same.
    Regards
    Divekar Mahadev

    Whilst the invoice is blocked you can still clear it, as a user might want to clear it and then re post the invoice.
    The only way to stop the line being used in F-32 is to have an open payment run against the line - something I would not recommend.

  • When importing my address book from Outlook why do I have multiple entries for the same contact?

    I have an address book and it contains one list in Outlook. I just downloaded Thunderbird and imported my address book. The address book and one list imported very easily but there are anywhere from 3-5 entries for each person in my contacts. If I delete the extras they are removed from my list as well. Why are there multiple listings for each contact and how can I remove the duplicates without losing my list entries?

    as I was looking thru pictures in my finder I noticed there were several copies of the same pictures I had taken yesterday. I just went thru all Seven copies of the pictures (accidental pics of my hands and the desk etc) and right clicked and moved  them to trash, then I thought I'd look it up when I realized its not just these pics, but very many had een stored in groups of three or four.
    1. Why is that?
    Depends on where you saw them - If they were in the iPhoto library iPHoto has either two or three different versions (no duplicates) or each photos in its library - this is not optional and can not be changed  --  If they were not in the iPhoto library then you can do what you please with them and they have nothing to do with iPhoto - iPhoto is only involved with the photos in its library
    2. Why is it advised to NEVER make changes to the structure or contents of iPhoto in Finder?
    (as quoted Below)
    "I would suggest using one of the proven safe programs - if you are going to manually remove them be sure to remember that you NEVER make any chnages to the structure or contents of the iPhoto library using the finder - only make changes using iPhoto"
    Very simple - if you do you will destroy your iPhoto library and have to start over losing all work you have done in iPhoto - The iPHoto library is a SQLite database and there are NO user servicable parts in the iPhoto library and any changes made using teh finder will corrupt the database and cause dataloss
    Is that a good enopugh reason for you?
    So if these photos were in the iPhoto library when you
    I just went thru all Seven copies of the pictures (accidental pics of my hands and the desk etc) and right clicked and moved  them to trash,
    You destroyed your iPhoto library and will either have to restore your backup from before you did this. put everything back EXACTLY like it was before or start over
    LN

  • Error message when importing photos into iPhoto from iPhone 4S

    Why is this happening? This is the message I get when I now try to import my photos off my iPhone "ERROR DOWNLOADING IMAGE: iPhoto cannot import your photos because there was a problem downloading an image."  PLEASE HELP ASAP.  Thanks!

    Good afternoon
    There seem to be a number of possibilities.
    Here is a thread that conatins a number of solutions.  The most common one is to load 50 pics at a time.
    https://discussions.apple.com/thread/3947440?start=0&tstart=0
    Hope this helps

  • 11.1.3 crashes when importing an mp3 file from hard drive

    When I try to 'add file' from my hard drive to iTunes 11.1.3 the program crashes. The file is not added.  Until updating to 11.1.3  I could add one or more files with no problem. Windows 7.
    Is this a glitch in the update or specific to my machine and how could I tell?

    Hi Tawney Mazek!
    In order to troubleshoot this issue and find the cause of it, you may need to use the following article:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • When I print an invoice from Earthlink, it is printed as a bunch of garbage. If I use internet explorer, it prints correctly

    Earthlink provides an invoice for payment. It doesn't print correctly

    I have the same problem and I don't know the cause or fix is BUT I found an add-on, "awesome screenshot" (https://addons.mozilla.org/en-US/firefox/search/?q=awesome+screenshot&cat=all&x=31&y=15), which takes a screenshot of your webpage and saves it as a picture. You can then crop and edit it to suit your printing or file saving purposes.

  • Error when importing artifacts using LCM from 11.1.2.2 to 11.1.2.2

    Hello Gurus,
    I am having issues when perform an LCM import to a different server. Following is what I get
    Could not read zip file
    EPMLCM-37015: Cannot Zip.
    Warning in migrating artifact, "/Configuration/Properties/Application Definition".
    EPMLCM-37038: Cannot perform migration. Unable to find artifact resource - Application Definition in the source application. I am not sure what needs to be done.
    Any help will be highly appreciated.

    In 11.1.2.2 if it is a classic application then a Planning LCM export will contain "Application Definition.xpad", this does not exist for EPMA applications. For classic it will create the application.
    For EPMA applications there will be a "Application Settings, Shared Dimensions, Filters and Overrides" file when an LCM EPMA export is run, the information in the file is the equivalent of the application definition file for a classic planning application.
    For an EPMA application which doesn't exist you probably have to first LCM the EPMA artifacts then deploy which will create the planning application, then run an LCM for the planning artifacts
    It does say even if it is an EPMA application that it will create the application if it does not exist but will fail because the "Application Definition.xpad" does not exist, whether this is the way it is meant to work or a bug I am not sure as I usually create the application first.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • 100% CPU usage when importing cd and downloading from store, please help!

    I am using itunes 8.2.1.6. The problem is that whenever I import a cd or download any music from the store my cpu runs at 100%. I have a pentium 4 (which manages nicely with any other task, even importing cd's with another programe) with 3gb RAM.
    Is anybody else having this problem? Does anybody know how to fix it?

    Mr. Bump

Maybe you are looking for