Zyxel modem will not allow wireless printing
My Netopia modem died recently and Eircom sent me a new Zyxel D1000 modem.
I have a Canon MG7150 wireless printer and I used to be able to wirelessly print from laptop, iPad and iPhone through the Netopia modem.With the new Zyxel modem I cannot connect to the printer at all.From what I have read on this forum there is no fix for this short of buying a different modem.This is not acceptable.Can Eircom provide a modem which allows wireless printing such as the Netopia previously supplied.Otherwise I see little point in remaining an Eircom Broadband customer.
I found a way to get this working. In the Home Networking/LAN setup set RIP direction to 'none' and RIP version to n/a or RIP1 depending on what's available. Also disable IGMP snooping.
Similar Messages
-
Time Warner Arris router/modem will not allow me to print wirelessly
Time Warner recently installed an Arris mode,/router and now I cannot print wirelessly to my HP printer from my iphone, ipad or macbook pro. I could do this when I used a Belkin modem with the Arris router. Any suggestions?
Something you might check is the Bonjour service in the router. If the router doesn't support Bonjour services, you will not be able to use it to print from any apple device via AirPrint. You can still print from a Mac PC if the drivers are installed, but you will not be able to print from any iOS device. You can use the app below to test the network to see if it will alow Bonjour services. Let me know what you find.
Bonjour Browser
I am a printer tech for HP. -
I cannot print wirelessly to printer or to Evernote, etc. Print option will not work. If I use Safari, the PDF will print.
Most likely culprits are one of these:
com.vmware.kext.vmnet 0073.02.98
com.vmware.kext.vmioplug 0073.02.98
com.vmware.kext.vsockets 90.1.5
com.vmware.kext.vmci 90.1.1
Boot into safe mode, put the machine to sleep, wait about 10 minutes, wake it, and see if the issue persists. If not, dump vmware, restart normally, and repeat the sleep/wake steps.
See
What is a kernel panic,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics, and
Tutorial: Avoiding and eliminating Kernel panics for more details. -
I think I received a Firefox up date today. Now when I try to print from any page on the browser I get a blank page. Thinking I was having a computer problem I reluctantly booted Internet Explorer. No problem printing. I went to Thunderbird and have not trouble printing any of my emails, so I think the problem is in Firefox. I have been a Firefox user for years and never had this problem. I am running Win XP
You're welcome. I look forward to the day that Mozilla writes all new print-related code so we don't have to deal with problems like this.
-
Printer driver will not allow color printing
I have a new Windows 7-64 bit OS on my new computert, and an HP CP1518ni (1500 series) color laserjet printer that has worked fine under Vista (32 bit) previously.
I went to the driver support site, since my installation disk didn't enable Windows 7, and got the universal UPD PCL6 driver, as indicated, and downloaded it (upd-pcl6-x64-5.4.0.11744.exe) and ran it.
It prints just fine in B&W, not in color. When I go to printer preferences it just says "color - no" and there I'm stuck.
Can anyone help? I can't use a B&W printer for all my work, so I can't switch to this better computer yet.
RDF78to KB123:
did you remember setting your driver to only print in grayscale? since there is an option to do that on the drivers installed on your computer.
If you're not sure, try to go to your printer icon under Printers and Faxes (for windows XP) or PRINTERS (for Vista and 7)
Right click the printer icon and go to printing preferences. Under FEATURE tab, see if there is a check mark on the print in grayscale (its somewhere almost at the bottom of the screen)
Or else, try to uninstall the drivers of your printer and re.install.
---Click KUDOS if you want to say THANKS. -
When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered that my other computers on the Wi-Fi network could no longer access the printer. The manual says Maverick OS will not allow PC's to share the printer. Does anyone else have this problem? My printer does not have on-board Wi-Fi but, otherwise, works fine. I shouldn't have to buy a new one. Is there a OS patch out there that would open the printer port for my PC computers?
I'm assuming that on the Mac, the System Preferences -> Sharing -> Printer Sharing -> [X] HP printer -> Everyone can print is selected? That is to say, the Mac will allow anyone to print using the printer, and that you did not try to restrict who can print.
How is your network configured? Bonjour as a protocol will NOT cross a router boundary. If you have 2 or more subnets active with the PCs on one subnet and the Mac on another, that would block the PCs from seeing the Mac.
You could have multiple subnets if you have more than one router, such as an ISP provided broadband modem/router and another WiFi Router. If the PCs are talking to one router and the Mac is talking to another, that could be a 2 subnet situation. The additional routers must be put into bridge mode, which is done differently depending on the router. But the basics are to diable DHCP and NAT services on the secondary router(s) having just one active router on the network.
Also, using Bonjour Browser on my Mac, it is showing me that the printer is being advertised as using Internet Printing Protocol, so if that is something selectable on Windows, maybe you can bypass Bonjour on Windows. -
Printer will not connect wirelessly / HP installer network ui plugin has stopped
I have tried uninstalling and reinstalling my Photosmart software multiple times in an effort to connect the printer to my wireless network (WEP). Each time I try, the software installs but will not allow me to connect the printer to my wireless network. I've installed with my firewall off and on, but nothing works.
I continue to get an error that says "HP Installer Network UI Plugin has stopped". It will connect via USB cable, but that's not what I'm hoping to do.
Advice? Questions?Hi there @csm25
Welcome to the HP forums!
After noticing your post about the error "HP Installer Network UI Plugin has stopped" you are seeing when attempting to install your Photosmart B209a model wireless, I searched the community to see what I could find. I came up with the following link and troubleshooting steps from the user SAbboushi , that seemed to resolve the problem.
Click here to see the steps: Cannot complete install of networked C6350
I hope that helps, let me know what the outcome is!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
My wireless router in my home has failed. I purchased a new router, but it will not allow some of the characters which I used for my old password. Therefore I cannot access the internet with my ipad mini or my ipod touch. I am unable to change the password on either device. How do I go about changing the password on these units so that I can access the internet? Thanks
Terry Beckinghamhttp://www.apple.com/support/appleid/contact/
-
My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?
You will need to install the printer on your Mac
Open System Preferences (gear icon) on the dock
Open Print & Fax
Click the + (plus) button at the bottom of the printer list
Wait for your printer to appear in the next box, then click it to highlight it
Click Add at the lower right
Be sure to select the correct printer when you try to print as you will see your printer listed twice. Good idea to make the printer now installed on your Mac the default printer so you do not have to choose which printer to use each time you want to print.
You can also go into Print & Fax, select the printer associated with the Time Capsule and click the - (minus) button if you want to delete that location. -
OS 10.6.8 and Canon printer. Prints wireless but will not scan wireless.
Just bought a Canon MX890 multifunction. OS 10.6.8. Used Canon support to help me set up wireless and I can print wireless but it will not scan wireless. Error message reads: "Cannot communicate with scanner for these reasons: Scanner is turned off or USB cable is disconnected." Any suggestions?
Sounds like you are trying to use Canon's MP Navigator application. To get this to work via wireless, you first need to open Canon IJ Network Selector which is located in Applications > Canon Utilities. With this application open it should show you the MX890 on the network. Select it and OK the change.
Next step is to open the MP Navigator application and click on the Preferences button. Then from the General tab you need to ensure the Canon MX890 Network is set.
With these two actions completed you should be able to scan with MP Navigator.
Or as Carolyn has instructed, you can use Image Capture which is included with OS X to scan from the MX890. -
Illustrator and Photoshop CS6 both will not allow me to print from them
Illustrator and Photoshop CS6 both will not allow me to print from them. InDesign will, but illustrator keeps popping up with "can't print the illustration." i have read other forums and i understand outlining typefaces, and spot colors but, it still will not allow me to print. Even if i open a completely new file and just try to print a black square it will not allow it. the problem might have started with an emailed EPS file? but im not 100 percent sure. i have disconnected and re connected the printer but the problem just seems as if all Illustrator, and Photoshop files will not print from the program and the connection with the printer is non existent (even though it says it is). please help!
Reset your illustrator prefs
Hold fingers over Shift Alt CTLR (PC) or Shift Opt Command (Mac)
Boot Illustrator
Immediately after booting depress the 3 keys as fast as you can. -
new itouch user here, We had a wireless connection with a password all set up but we couldn't remember the password meanwhile there are other connections around us but locked. So i decided to make a new one yet it still will not allow to go on safari after i type in the password PLEASE HELP ive turned on and off etc
My guess is that the security settings on your router and iPod do not match.
For a test, change your router so there is no security. See if you can connect and get to the Internet. If that works, set up the router with security and use the same settings for the iPod. -
I have a Finger Print Reader on my Laptop and when I go to a logon screen it says this not a logon screen and will not allow me to use my Finger Print Reader to logon. When I use IE it works fine. Can u please help me with this its the only negative I fined with Firefox everything else is AWESOME!! Thanks, Anthony
The driver I have is the most recent version. This is a Firefox problem....fix it!
It works perfectly on Internet Explorer and worked on Firefox before the last update so it's your problem. -
Iphone 6Plus will not allow POP email account and cannot print to my wifi printers, I did on my Iphone 5 until I upgraded, can anyone help
I had talked with three people at Apple tech support on the phone, one person in the Apple store in Indianapolis, plus the other places I mentioned. Only the one young man in the Apple store was even able to identify the problem which was the POP vs. IMAP issue. And then like you said he was only able to say he hoped it would be fixed in the next update release. I did call him back this morning and told him about your simple solution, that I had seen it at the Apple forum, and that he might suggest bringing this topic up at the next staff meeting. I also let my Verizon rep know and an agent at Comcast. Something so simple yet it took three days and a lot of frustration to get fixed. Thanks again. You're my hero! ~ Carol Thomas
Also forgot to mention ... I got the iPhone 6 Plus about three weeks ago and did not have this problem. But I did a backup of my iPhone 5S on the computer and then used that backup to restore to my new iPhone. The iPad I did differently and just set it up as a new iPad with no restoring from the old one. That must have made a difference on the phone because it was set up just like the 5S ... as a POP3. -
I JUST PURCHASED A HP LASERJETPRO P1102W BUT THE PRINT DIALOG WINDOW IN CS6 IS DIMMED AND WILL NOT ALLOW COLOR SEPARATIONS TO BE PRINTED?
Save as a PDF and print the separations out of Acrobat.
Maybe you are looking for
-
Hi I want to generate Serial number and Frequency values in an Excel sheet.But I am getting the serial no and Frequency names at the bottom and the values at the top. I've attached the vi here.Please find it.I want the S.NO and Frequency at the
-
Dear All, I have installed WAS Java add IN on WAS ABAP on mysap ecc5 windows based server with oracle 9i database . I have to install some java patches through JSPM but there is no JSPM folder is exist , how I can install it . Pl. help me Thanks Sand
-
My AirPort Express won't connect to my Verizon FIOS Router
I am trying to get my AirPort Express to join my Verizon FIOS wireless network and I am experiencing difficulties. I have made sure theAirport is updated with the 6.3 firmware. I only want to use it to play AirTunes over my existing network. So when
-
I would like to order postcards pre-addressed to myself (as an RSVP), and to specify for editable type the color of an unselectable letterpress element. Will Apple work with me if I want to modify an uneditable element on one or more of their card th
-
The Bose TV remote doesn't work on the Apple TV. I have to use the Apple TV remote. Is it a system problem with the Apple TV?