Adapter Engine Load balancing for Messages HTTP SOA/SOE
Greetings all,
We are currently implementing our SOE/SOA solution utilizing SAP services between a .Net Application. Basically .Net -> PI -> ECC and back.
We are load testing the system and are now experiencing the CI getting overloaded.
We have upped the Thread Count (Thread Manager 350 and System Threads 120) and the Queue thread from 5 to 20.
We are using SOAP with Principal Propagation.
There is a hardware load balancer we are using which can spread the load between multiple application servers. We modified the SLDRegistration host and ports (http/https) in Visual Administrator (SAP XI AF CPA Cache) in the global server node.
In SXI_CACHE Got -> Adapter Engine Cache, it displays http://<sidms>:<port>/MessagingSystem/receive/AFW/XI
Is this where the load balancer should be placed with the port name?
Any help would be appreciated.
Thanks
Hi Rocco
For switch over environment setup look at SAP Note 774116
Did you referred High availability guide
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/cefe0399-0701-0010-8d86-b6b31cc5a681
Looking at your requirement. Check withe the Use cases of F5 application setup for E SOA. That can help
Thanks
Gaurav
Similar Messages
-
Adapter Framework Load Balancing
Hi guys,
I lately read in SAP Doc "Performance Tuning In XI", there it is said that
<b>Adapter Framework</b> uses <b>HTTP Load Balancer</b> for Load balancing (<b>Adapter Framework inbound processing using HTTP load balancing</b>.)..
Can u put some light on the above statement?
Does it mean that the messages going out of Adapter Framework will use Load Balancer or messages coming inside Adapter Framework?
Thanks,
AshishHi,
This High Availability Guide will give some hints on the same:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cefe0399-0701-0010-8d86-b6b31cc5a681
http://help.sap.com/saphelp_nw70/helpdata/en/43/39c7b227b91bcbe10000000a1553f7/content.htm
Hope this helps,
Rgds
Moorthy -
Setting up Load Balancing for 11i for Intranet & Internet Access
Our current environment for 11i (11.5.5) is accessed only internally (via Intranet). We need to allow outside access (via Internet) also for self-service apps (ie. HR). Oracle Support/Metalink has stated that Load Balancing (note 148155.1) is the only supported method to have multiple (Apps Servers) systems access a single database. Could I get feedback from anyone who has implemented Load Balancing for 11i? Additionally if someone has implemented this for both intranet and internet access how has your company setup? Do the secondary server(s) from the Load Balancing note reside in the DMZ? And thus the primary app server and database reside inside the firewall? Thanks....
Hi,
We are using 6 middle tiers for internal access for intranet access and 2 middle tiers in External DMZ with only web server running for Extrenal Access over Internet for Self Service.
You Implement one Load Balancer for first 6 internal Middle Tiers with site level profiles pointing to Internal .
You implement second Load balancer for external 2 middle tiers with server level profile options for these two servers pointing to External Load balancer .
To check how to implement load balancer vsiit
http://becomeappsdba.blogspot.com/2006/09/configure-hardware-load-balancer-at.html
Wait for my next post in above blog site with step by step procedure to implement above solution External & Internal one
Atul Kumar
Oracle Apps DBA
http://teachmeoracle.com -
Cisco RV042 - Dual Wan Load Balancing - Secure Site (HTTPS) Trouble
PID VID :
RV042 V03
Firmware Version :
v4.0.0.07-tm (Aug 19 2010 19:19:50)
Ever since I setup my RV042 with load balancing using the Dual Wan system I have had trouble staying connected to some secure sites. After doing some searching I found that the potential issue is the IP change mid session.
"http://www.broadbandreports.com/forum/r25537589-Cisco-RV042-can-not-use-load-balancing-for-some-web-sites"
Although my interface is significantly different I was able to find the same area in my RV042 admin area however, it doesn't seem to work.
System Management
> Dual Wan
In Wan 1 & Wan 2 I have HTTPS and HTTPS Secondary all forwarded to use Wan 2 under Protocol Binding
This however has not managed to do anything at all for my network and every computer conneceted experiences the same HTTPS irregularities at some websites.
I'm sure I must be doing something wrong, but I don't know what it is.
Both incoming connections are from the same service provider although the plans are different.
Any help with this would greatly help me stop losing my mind trying to fight with my website control panel for 10 minutes to just login and get something done.
ThanksAny ideas or advice from anyone?
-
What is the alternative of F5 BIG-IP LTM Load Balancer for OEM 12c
We want to implement service load balance, however oracle recommended
F5 BIG-IP LTM Load Balancer for OEM 12c
How much it is cost? and is there any free alternative we can use which supported by Oracle?
ThanksApart from F5, Cisco is another SLB vendor. I am not sure about any free alternative though.
Note that regardless what SLB that you pick, it should meet the requirements documented in section 29.3.2.2 of the EM12c Release 3 Administrator's Guide:
The SLB must provide support for multiple virtual server ports. Enterprise Manager typically requires that up to 4 ports are configured on the SLB (Secure Upload, Agent Registration, Secure Console, Unsecure Console)
Support for persistence. HTTP and HTTPS traffic between the browser and the OMS requires persistence
Support for application monitoring. The SLB must be capable of monitoring the health of the OMSs and detecting failures, so that requests will not be routed to OMSs that are not availa
Regards,
- Loc -
Reverse Proxy and Load Balancer for SMP 2.3 and Agentry Application
Hi Expert,
I'm putting in place a mobile solution composed by SMP 2.3 SPS 4 and SAP ECC 6.0. In the SMP 2.3 I created the agentry server and I have deployed my agentry application.
My SMP/Agentry infrastructure is composed by two servers therefore I need a load balancer for balance the load into the several servers. Furthermore I need to use a reverse proxy in my DMZ zone.
Based on what indicated in the SAP note "1904213 - SAP Mobile Platform Server Release Information" the Apache Reverse Proxy is not supported for Agentry clients. Agentry uses nginx for Reverse Proxy.
I also found the following document How-to-Guide for Reverse Proxy and Load Balancing in SAP Mobile Platform 3.x that explain how to set-up a reverse proxy and load balancer with nginx and apache.
Both the SAP note and the HOW to document are refereed to SMP 3.0 and not to SMP 2.3.
I would know if the NGINX must be used also for SMP 2.3.
Any suggestion/information is appreciated.
Thanks in advance
g.Please see Agentry Network Landscapes
-
Installing 2 Application server and 1 DB server and load balancing for 11i
Hi,
I need info on how to install and configure load balancing for 11.5.8 on Win2000. The scenario: 1 db server DB, 2 apps/web/forms servers AP1 and AP2. Using rapid install you can only specify one db server A and one form server in multi node installations, right? How do I install the form server on AP2? Can I use the same config.txt? The computer name for AP2 is different.
Thanks & Regards,
JagalI have the very same issue. We want to install 4 web/form servers on a hardware load-balancer and the issue is we can only specify one forms server.
Does anyone know the secret bullet here?
Thanks
John -
Load Balancing for Microsoft Orchestrator application
Hi Folks,
We are trying to configure Load Balancing for Orchestrator Server.
We have closely 200 users running a workflow.. so in that case, we need to configure the Runbook Server as a application load balancing cluster, so please do share me the configuration guides..
Regards,
Venu
Best regards, Venu.I'm in the middle of doing this right now. There is a doc on metalink (233428.1) that details the process. I would highly recommend trying this in dev/test env first. Even though the instructions are very straight forward and not very complicated, I'm still having configuration issues.
Clint -
Network load balancer for Agentry applications
Hi Expert,
I'm going to implement a SAP Mobile Platform solution that will use an agentry application and I need some clarification about the HA configuration and the usage of the network load balancer and relay server. Just for information I'm going to use SMP 2.3 SP4.
My understanding is that Relay server is a reverse proxy and load balancer for SMP but It can't be used for the agentry applications. Is this correct?
Based on the standard configuration in order to balance the load of the client devices in the SMP cluster I have to use a Network load balancer, therefore the technical architecture of my solution should be the following:
|Agentry Client device| ----> | Network Load Balancer | ----> | SMP and Agentry Cluster| -----> |Back end systems|
Is this correct? I didn't find specifications about the Network load balancer.. Is there a list of the Network load balancer products supported from SAP for agentry application. Is there any best practice on the network load balancer?
Thank you in advance for you collaboration.
BR
g.
Tags edited by: Michael ApplebyBecause we don't test any directly with our QA we don't have have a preferred products. Talking to our consulting group they normally just use what the customer already has installed in their network. Both Software or hardware load balancers has been used.
The key part needed for the load balancer for Agentry 6.0.x and SMP 2.3 (not SMP 3) that it is set to TCP Pass through.
Stephen -
Does Traffic Manager provide database load balancing for MySQL?
I need two VMs to implement MySQL Cluster in Windows Azure. VMs allow configure endpoint load balance set for Mysql, but I did not find tcp protocol in Traffic Manager. Does it provide this service for database
load balancing?Hi,
Traffic Manager works on the DNS level and routes traffic between public endpoints that sit behind a common DNS name. So you can't use this for your scenario.
However, You can implement
load balancing for VMs in another way.
Edward -
Load balance for HTTP Connection to ABAP System (Type H) RFC connection
Experts,
For proxy we are using HTTP Connection to ABAP System (Connection type H) RFC connection in PI to get connected to ECC. I only see the option to use Target host in the Target system settings than Load balance option. In general ABAP Connection (Connection type 3) has Load balancing status option in Target system settings.
My requirement is I should use a logon group with the message server when PI connects to ECC. How can we achieve this? At the moment I can only use the Central Instance or any dialog server (App server) in RFC but not a logon group.
Thanks in advance.
MaheshHi Naga
Could you check the link below?
http://help.sap.com/saphelp_nwmobile71/helpdata/en/47/c5935087b62d66e10000000a42189c/content.htm
https://service.sap.com/sap/support/notes/1040325 -
ISE 1.2 - Multiple NICs/Load Balancing for DHCP Probe
Hello guys
Just prepping an ISE 1.2 patch 8 setup in our organization. I am going for the virtual appliances with multiple NICs. It will be a distributed deployment with 4 x PSNs behind a load balancer and there is no requirement for wireless or guest user at the moment. I've got 2 points I will like to get some guidance on:
Our DC has a dedicated mgmt network and I plan to IP the gig0 interface of the PANs, MNTs and PSNs from this subnet. All device admin, clustering, config replication, etc will be over this interface. However, RADIUS/probe/other user traffic to the ISE PSNs will be over the gig1 interface which will be addressed from another L3 network. Is this a supported configuration in ISE?
I intend to use the DHCP probe as part of device profiling and will ideally like to have just an additional ip helper to add to our switch SVI config. Also, it will appear that WLCs can only be configured for 2 DHCP servers for a given network so another consideration for when we bringing our WLAN in scope. We however use ACE load balancers within our DC and from what I have read, they do not support DHCP load balancing. Are there any workarounds to using the DHCP probe with multiple PSNs without having to add each node as an ip helper/DHCP server on the NADs?
Thanks in advance
SayreHello Sayre-
For Question #1:
Management is restricted to GigabitEthernet 0 and that cannot be changed so you should be good there
You can configure Radius and Profiling to be enabled on other interfaces
Even though you are not using guest services yet, you can dedicate an interface just for that. As a result, you can separate guest traffic completely from your production network
Take a look at this link for more info:
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/installation_guide/ise_ig/ise_app_c-ports.html
For Question #2
If you are using a Cisco WLC and running code 7.4 and newer you don't need to mess with the IP helper configurations.
The controller can be configured to act as a collector for client profiling and interact with the DHCP thread along with the RADIUS accounting task that is running on the controller. The controller receives a copy of the DHCP request packet sent from the DHCP thread and parses the DHCP packet for two options:
–Option 12—HostName of the client
–Option 60—The Vendor Class Identifier
After this information is gathered from the DHCP_REQUEST packet, a message is formed by the controller with these option fields and is sent to the RADIUS accounting thread, which is in turn transmitted to the ISE in the form of an interim accounting message.
Both DHCP and HTTP profiling settings are located under the "Advanced" configuration tab in the WLC
On the other hand, you can also use Anycast for profiling. You can check out some of Cisco Live's sessions for more info on that. Here is one that is from a couple of years (There are more recent ones that are available as well):
http://www.alcatron.net/Cisco%20Live%202013%20Melbourne/Cisco%20Live%20Content/Security/BRKSEC-3040%20%20Advanced%20ISE%20and%20Secure%20Access%20Deployment.pdf
I hope this helps!
Thank you for rating helpful posts! -
Load balancing for BPEL Cluster
Can anybody tell how to configure the load balancer in BPEL Cluster ..? I am not able to get the correct documents for that. I want the request from the client can be redirect to any of the cluster server that will be having the PPEL Process deployed.
Can i use third party load balancer also or can i use oracle http server as load balancer ....how to configure in both the case?Hi Dominik.
Thanks for responding to my message.
Where could i find more info relating to the WEB dispatcher.
I also posted a message on OSS and SAP did not mention
a WEB Dispatcher. (Startup Framework and the J2ee dispatcher handing the load balancing)
Is the WEB dispatcher a must or are there alternate solutions. I am still confused on this topic ??
On the current EP5 release, the load balancing is handled
via MS Load Balancing.
Thanks and appreciate the help !!
Morgan
Message was edited by: Morgan Moodley -
Adapter configuration & load balancing
Hi,
I posted questions for my requirements on Adapter forum but did not get any answer.
Hope this forum can help.
We started a POc with Oracle As adapters for EBS. As part of that we are trying following taks,
1) Connect to multiple EBS instances & deploy individual adapter for same on AS
2) Use these two instances for loadbalancing & scalaing
I am not bale to find information about above two in Oracle Adapter documentation.
I could build sample EBs adpater scenario with concurrent programs and use a default APPS adapter deployed on AS server by modifying oc4j-ra.xml. But failed to delpoy multiple instances that can be viwed from Enterprise Manager.
Also how to configure my adapters for better load balancing and sclaling. Is there any doc link that i can read?
Thanks in advance.Hi,
This High Availability Guide will give some hints on the same:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cefe0399-0701-0010-8d86-b6b31cc5a681
http://help.sap.com/saphelp_nw70/helpdata/en/43/39c7b227b91bcbe10000000a1553f7/content.htm
Hope this helps,
Rgds
Moorthy -
Adapter Scaling & load balancing
Can some one provide me info on how to achieve scaling and load balancing with Oracle Adapters?
I am trying to collect this data for poplesoft Adapter & OracleApplications e-business suite adapter
Thanks in advance..Hi,
This High Availability Guide will give some hints on the same:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cefe0399-0701-0010-8d86-b6b31cc5a681
http://help.sap.com/saphelp_nw70/helpdata/en/43/39c7b227b91bcbe10000000a1553f7/content.htm
Hope this helps,
Rgds
Moorthy
Maybe you are looking for
-
Well, I just downloaded the new version of iTunes (11.1.4), and suddenly that message appears. I don't know what to do, I've been spent all day long to figure it out what the problem is. Please help me!!
-
Soap : getting response in XMlspy, but no message in XI
Hello Experts! Scenario : SOAP -> XI -> R3 (Proxy) -Scenario is configured in REP + Dir. -WSDL generated with correct URL (As suggested on SDN by experts ) -Using XMLspy for calling the ws. When Soap request is created and sent to server via XMLsp
-
Using Power shell script how to hidden SharePoint existing features.
Hi Firends, Using Power shell script how to hidden SharePoint existing features. Please help me. Thanks, Tiru Tiru
-
Struts 1.1 html:error
My resource file name is: application_en_US.properties This file is placed under /WEB-INF/classes/resources/application_en_US.properties In JSP file, I have a form, where I want to check, wether the userName field is null or not. If it is NULL, i wan
-
I have an iPhone 4, but the computer does not not recognize, do not recharge the battery if it is off