APEX.AUTHENTICATION.SESSION_VERIFY_FUNCTION - ORA-01403: no data found

Hi,
I'm deploying an APEX app with user general identified users (like user1, user2, and so).
Now in this stage of implementation, we created user groups and user, but when I migrate the app from dev to production, all the new users that we created in the prod environment, when they try to log in, the app sends the error "APEX.AUTHENTICATION.SESSION_VERIFY_FUNCTION - ORA-01403: no data found" and the users cant't access the app.
We have triple-checked all the variables buyt can't find the error from our side.
Any help would by highly appreciate
Thanks in advance,
Agustin.

Hi Hari,
I'm just checking my Ayuthentication Scheme (instead of my Authorization scheme) and it seems to be the origin of the "no_data_found" message.
The thing is that we make a Validation against one internal user table wich defines the office where the user work. That table had the username in lowercases and even the user wrote its username in the login page, using lowercases, the SELECT returned an "no_data_found".
If the username field in our table is un UPPERCASE, the same function, typing the username in lowercase, returns OK.
Thanks a lot for your interest
Agustin

Similar Messages

APEX bug:9879227 (ORA-01403: no data found error when using validations)

Hi,
We are getting the
ORA-01403: no data found error
when the APEX page has validations AND a tabular form is also present on the page.
I did see a couple of other forum links discussing the issue (bug id: 9879227 ?? ).
But what i want to get a confirmation on is, in which release was this bug really fixed ?
i see the release notes of 4.0.1.00.03 claiming that it is fixed
in the release.
we are on 4.0.1.00.03. is this bug really solved in release 4.0.1.00.03?
are there any known work-arounds ? i tried re-creating the report multiple times, but that did not help.
Any suggestions or work-arounds will greatly help us.
Regards,
Ramakrishnan

Ramakrishnan,
If you are talking about getting no data found when trying to save the report then take a look at the last message in this thread:
{message:id=9971445}
Cheers,
Tyson Jouglet

ORA-01403: no data found error (given by edit link of APEX-made form)

Hello!
I am a newbie in apex, so please forgive me if my question is stupid or obvious. I got a bit confused because of a problem, and I really hope that you professionals can give me some clues of where could I begin the elimination of this error.
I made a report and a form in another page with APEX's tool Add Form/Report and Form. The report shows a full table, and the rows of the table are editable. However, I have rows which I can't edit because APEX gives me the following error:
ORA-01403: no data found
Error Unable to fetch row.
Not all rows do this, but I have a few that do. Of course the report shows them, so I think they must exist. I didn't change anything special on the APEX-made items or processes.
I thought that the problem could be with my data, but I couldn't see anything weird in that rows.
Does anyone have an idea of what can this be caused by? I have APEX 2.1.0.00.39.
Thanks,
Eszter

Hi Andy,
Thank you very much for your time!
The fields in the form are all right. The fields get filled in perfectly in most of the cases, only those few rows don't :(
However, now that you wrote of the process of row fetching, I think that maybe I have an idea of what is happening. My table has two primary keys (two fields together make the primary key, I don't know how it's called in English), one of them is a date. (I know that this is quite a bad practice, but, much to my regret, I cannot change it.) Now, this date is in YY-MON-DD format, which is used by my language.
One of this dates is from 1800's. As my report shows it, the year gets truncated to the last two character. APEX passes this value into the field of the form using varchar2, and when it tries to cast it back to YY-MON-DD format, then it supposes it's from 1900's instead of 1800's. With 19xx however it doesn't find my field.
Does this sound logical? It seems logical to me, but I am a beginner... :(
Still, if this is the core of the problem, it's most possibly not the only problem, because I have dates from 19xx which can't identify their rows... But I am suspicious because of these date things. If you have any idea then please let me know.
Thanks,
Eszter

Apex file loader 4.1 create page error: ORA-01403: no data found

I am trying to create a page where csv files can be uploaded using the wizard in Apex 4.1.0.00.32
However after completing the wizard and pressing the finish button, the following message shows up:
Error Error creating page .
ORA-01403: no data found
All I can do then is press an OK button which takes me back to the summary screen before submitting.
I've already tried the wizard using other tables, empty and ones with data in it, but with the same result.
The strange thing is that I have used the wizard with success, but now it won't work anymore in this application.
The other strange thing is that the wizard is still working for other application within the same workspace, even on the same table...
Anyone has got any ideas to fix this (making a new application from scratch is my last resort considering the amount of work I've already put into this one)
Thanks!

Alright, I got the wizard working again. This is how:
By doing some searching on google I found that the errorlogs of Apache are logged in the folder: apache\apache\logs\
I found that there were some error logs in there that created new lines each time I used the wizard:
[Fri Jan 27 17:45:41 2012] [error] [client 172.18.40.211] [ecid: 1327682741:10.10.10.128:2380:2616:373,0] File does not exist: d:/oracle/product/10.2.0/ohs_1/apache/images/css/apex_builder_4_0.css
[Fri Jan 27 17:45:44 2012] [error] [client 172.18.40.211] [ecid: 1327682744:10.10.10.128:2380:2536:480,0] File does not exist: d:/oracle/product/10.2.0/ohs_1/apache/images/css/apex_builder_4_0.css
So I figured maybe if I copy the existing apex_builder_4_1.css in the folder and rename it to apex_builder_4_0.css it would work.
After doing that the error messages stopped in the error log, but still the wizard failed.
After that I changed the theme of the application and the wizard started working again!
Don't no what will happen when I change the theme back to the one I was using, maybe I will try that later.
For now I am happy!
Thanks Patrick for putting time into it
(btw my application was not imported, but I did play around with the themes a fair bit)
Edited by: Merijn8106997 on 27-jan-2012 9:27

APEX 5 Bug? Change Col order ends in Error processing update. ORA-01403: no data found

Hi ,
i have successfully migrated my 5 apps to apex 5 yeah. Wow, Migration was complted in 15 mins !
But now i have Problem: I have a classic report and want to chage the column order.
But i always get a
Error processing update.
ORA-01403: no data found
Any Workarounds ?
Thanks
Marco

Hi Patrick,
the Copy App crashes with
ORA-06550: line 79, column 18: PLS-00103: Encountered the symbol "WHERE" when expecting one of the following: ) , * & = - + < / > at in is mod remainder not rem => <an exponent (**)> <> or != or ~= >= <= <> and or like like2 like4 likec between || multiset member submultiset
Execution of the statement was unsuccessful. ORA-06550: line 79, column 18: PLS-00103: Encountered the symbol "WHERE" when expecting one of the following: ) , * & = - + < / > at in is mod remainder not rem => <an exponent (**)> <> or != or ~= >= <= <> and or like like2 like4 likec between || multiset member submultiset
begin wwv_flow_api.create_list_of_values( p_id=>wwv_flow_api.id(23215926281374548)
Thanks for help !
Marco

ORA-01403 :no data found in apex

dear all
Please, not to view this thread as the contents are same posted in another thread with a different subject.
i have a form with 6 regions.
in one of the region i place a button save.
i have a conditional process to insert the data in the table
after entering the data into the respective fields when i click the save button
it is giving this error.
ORA-01403: no data found
Error UNABLE TO INSERT
OK
what is this error why it is comming?
how to solve it? if anyone gives solution it would be a bright day for me.
Message was edited by:
srikavi

ORA-01403 occurs when an SQL SELECT statement written inside a PL/SQL proceedure/function etc is expected to return a row (or more) but doesn't.
So, your code to save might read along the lines of:
declare
bar number;
begin
select foo into bar from foobar where id=1;
insert into ... where id=bar;
end;
Now, if the SELECT statement didn't return a row (ie, in the example above there are no records with an id of 1) then you will get an ORA-01403 error.
Look at your proceedure for saving and run any select statements seperately in a SQL editor and check that all return one or more rows.

PLSQL function body returning an sql report returns ORA-01403 No Data Found

I am on APEX 3.1.2.00.02 and Oracle 10g.
I am developing a report with SQL Query (PL/SQL function body returning SQL query) type. But on running the report I am getting
report error:
ORA-01403: no data found
Region Source
declare
qry varchar2(32767);
begin
--Procedure call
my_pkg.get_query(qry);
htp.p(qry);
return /*select 1 from dual */ qry;
end;
Procedure
PROCEDURE get_query (V_QRY OUT VARCHAR2)
IS
qry varchar2(32767);
begin
qry := ' select name
     , max(decode(to_char(service_date,''Mon-YY''), ''Jan-09'', value, null)) as "Jan-09"
     , max(decode(to_char(service_date,''Mon-YY''), ''Jan-09'', value, null)) as "Feb-09"
     from MY_TABLE
     group by name ';
V_QRY := qry;
end;
The query will be enhanced later to add more months and year based on user parameters once I am successfull in running report on this.
I wish to use Query Specific Column names. I have seen this suggestion from Scott in a number of threads to use /*select 1 from dual */ with query but not working in my case.
Can someone please suggest what can I do to make it working?
Regards,
Amir

Firstly, have you unit tested the procedure (namely, within the SQL Workshop, SQL*Plus, SQL Developer,etc, etc.) to see if it produces the right output in the first place?
If you have, and the query string generated is valid, try assigning the output to a page item (thus allowing you to view it in the session browser) or even pass the procedure output into the debug window (with the use of the wwv_flow.debug function). This might reveal some state or session change which is causing it not to return.You might find this easier to achieve if you change from a 'procedure and out parameter' combination to a 'function returning string' approach.
Alternatively, try re-creating the report in a new region - occasionally I've come across weird bugs with report regions which resolved themselves in this manner.

PL/SQL function body returning SQL - report error:ORA-01403: no data found

Hi,
I am working on Application Express 4.0.2.00.06, and 11G database.
I have a problem with classic report area of type - PL/SQL function body returning SQL query. Query works if I define region area as - Use Generic Column Names (parse query at runtime only), and does not when I define it - Use Query-Specific Column Names and Validate Query.
I am getting error:
report error:ORA-01403: no data found
This is my query that is returned from function, and displayed with htp.p, and it works ok and returns data in SQL Developer and SQL Workshop (in Apex).
<code>
/* select 1 from dual */ SELECT SIFPRO, NAZIV, VODITELJ, DATPZA,SUM(DECODE(TJEDAN,'2010/46',BRDJEL,null)) as "2010/46" ,SUM(DECODE(TJEDAN,'2010/49',BRDJEL,null)) as "2010/49" ,SUM(DECODE(TJEDAN,'2010/50',BRDJEL,null)) as "2010/50" ,SUM(DECODE(TJEDAN,'2010/51',BRDJEL,null)) as "2010/51" ,SUM(DECODE(TJEDAN,'2010/52',BRDJEL,null)) as "2010/52" ,SUM(DECODE(TJEDAN,'2011/01',BRDJEL,null)) as "2011/01" ,SUM(DECODE(TJEDAN,'2011/02',BRDJEL,null)) as "2011/02" ,SUM(DECODE(TJEDAN,'2011/03',BRDJEL,null)) as "2011/03" ,SUM(DECODE(TJEDAN,'2011/04',BRDJEL,null)) as "2011/04" ,SUM(DECODE(TJEDAN,'2011/05',BRDJEL,null)) as "2011/05" ,SUM(DECODE(TJEDAN,'2011/06',BRDJEL,null)) as "2011/06" ,SUM(DECODE(TJEDAN,'2011/07',BRDJEL,null)) as "2011/07" ,SUM(DECODE(TJEDAN,'2011/08',BRDJEL,null)) as "2011/08" ,SUM(DECODE(TJEDAN,'2011/09',BRDJEL,null)) as "2011/09" ,SUM(DECODE(TJEDAN,'2011/10',BRDJEL,null)) as "2011/10" FROM (SELECT * FROM PMV_PLAN_TVRTKA) GROUP BY SIFPRO, NAZIV, VODITELJ, DATPZA ORDER BY SIFPRO, NAZIV, VODITELJ, DATPZA
</code>
As you can see, I even tried with workaround that I found on the previous post on the forum, and that is to put /* select 1 from dual */ to start query.
Any help would be appriciated.

/* select 1 from dual */ SELECT SIFPRO, NAZIV, VODITELJ, DATPZA,SUM(DECODE(TJEDAN,'2010/46',BRDJEL,null)) as "2010/46" ,SUM(DECODE(TJEDAN,'2010/49',BRDJEL,null)) as "2010/49" ,SUM(DECODE(TJEDAN,'2010/50',BRDJEL,null)) as "2010/50" ,SUM(DECODE(TJEDAN,'2010/51',BRDJEL,null)) as "2010/51" ,SUM(DECODE(TJEDAN,'2010/52',BRDJEL,null)) as "2010/52" ,SUM(DECODE(TJEDAN,'2011/01',BRDJEL,null)) as "2011/01" ,SUM(DECODE(TJEDAN,'2011/02',BRDJEL,null)) as "2011/02" ,SUM(DECODE(TJEDAN,'2011/03',BRDJEL,null)) as "2011/03" ,SUM(DECODE(TJEDAN,'2011/04',BRDJEL,null)) as "2011/04" ,SUM(DECODE(TJEDAN,'2011/05',BRDJEL,null)) as "2011/05" ,SUM(DECODE(TJEDAN,'2011/06',BRDJEL,null)) as "2011/06" ,SUM(DECODE(TJEDAN,'2011/07',BRDJEL,null)) as "2011/07" ,SUM(DECODE(TJEDAN,'2011/08',BRDJEL,null)) as "2011/08" ,SUM(DECODE(TJEDAN,'2011/09',BRDJEL,null)) as "2011/09" ,SUM(DECODE(TJEDAN,'2011/10',BRDJEL,null)) as "2011/10" FROM (SELECT * FROM PMV_PLAN_TVRTKA) GROUP BY SIFPRO, NAZIV, VODITELJ, DATPZA ORDER BY SIFPRO, NAZIV, VODITELJ, DATPZA

Problem with new DB app, report+form, report works great, form says ORA-01403: no data found

I have a new table, the PK is a varchar2(5) column, when I allow the default query in the report to do its work, I get all the expected data. when I click on the edit icon (pencil), I get an error screen indicating ORA-01403: no data found. I'm hosed! This was generated by the app! no changes were made to anything in the app, except to turn off tabs at create time. I even left the default name.
My ARF is hitting the right table with the PK column, but finds nothing. I have the "success" message showing me the PK value. What could be going on here, and how can it be addressed? Today is the 1st time I have seen this matter.
I'm running 4.22 as the workspace admin, I have other apps that work fine (to expectation), my browser is FF22, though I plan a downgrade to 18. Our DB is 11.1.0.7.

Jorge, thanks for your attention to my problem, I appreciate any insights, although there is a little clarification I can offer. Also, if you can, please remind me the tags to use in my text that would properly set off the code snippets or prior message content?
[you wrote]
You said you have a "success" message showing you the PK value. Can you elaborate on this?
The form page, under the ARF, allows for the display of a "success" message and a "failure" message. I have seen my "success" message appear, but it didn't show my key field as a brought-back value (which I told it to include), and I think now this is not relevant any longer. I found that there was a link on the report attributes page between #ROWID# and a P2_ROWID that was incorrect (probably from an earlier stage of dev in the app), and I changed this to my key field, and this altered the outcome of the ARF action. This leads to ....
[you wrote]
Can you see the correct PK value in the URL? Does the item parameter match what you expect (correct page item and value)? Perhaps share that full URL here?
I have expected values in my URL. The URL does show my key value (tail end of URL underlined here):
../apex/f?p=120:2:7519563874482::NO::P2_VCODE:RB15
[you wrote]
Debug the page and see which process, item or step is actually failing. You could be running some other process on the form page and that could be what actually fails. Treat it as if the ARF works correctly and see what else could be happening.
I can add the detail that my 1st message was based on testing with a table where I set the PK as data type VARCHAR2, but in more testing on the actual app (whose URL piece is above) I am using a PK which is CHAR.
The result of the debug effort is that APEX has built its own query for pulling back the row in the ARF, and it is joining on my PK field to an APEX item P_ROWID which I don't think I created. Nor does it appear to offer me any avenue for correcting it. debug snippet: where "VCODE" = :p_rowid; end;

ORA-01403: no data found when calling a web service from HTMLDB

I am working through Section 6 How to Implement a Web Service of the HTML DB 2 Day Developer tutorial. I can get the first example to work but not the second one. I am able to add the web reference and create the form and report. However, when I run the page and click submit, I get ORA-01403: no data found.
When I test the service, this is what shows in the Message Request:
<?xml version='1.0' encoding='UTF-8'?><SOAP-ENV:Envelope
xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/1999/XMLSchema">
<SOAP-ENV:Header><namesp1:Header xmlns:namesp1="http://www.xignite.com/services/"><namesp1:Username xsi:type="xsd:string"></namesp1:Username><namesp1:Password xsi:type="xsd:string"></namesp1:Password><namesp1:Tracer xsi:type="xsd:string"></namesp1:Tracer></namesp1:Header></SOAP-ENV:Header><SOAP-ENV:Body><namesp1:ListFuturesByExchange xmlns:namesp1="http://www.xignite.com/services/"><namesp1:Exchange xsi:type="xsd:string">NYMEX</namesp1:Exchange></namesp1:ListFuturesByExchange></SOAP-ENV:Body></SOAP-ENV:Envelope>
Nothing shows in the Message Response.
I have also tried to call a simple web service that I created in .NET. It exhibits the same behavior. I am able to add the reference and create the form. But when I click the submit button, I get ORA-01403: no data found.
Windows 2000
HTMLDB 2.0.0.00.49
Oracle9i 9.2.0.6.0
Any help will be greatly appreciated.

I'm having a similar problem!, Although, distressing as it is to observe the lack of response this thread has had for 9 months, I'm still seeking help here!
I created a web service reference according to the following WSDL : "http://OgAppExpress:[email protected]:5555/invoke/OgAdminUtils.pub:WSDL_HLR" (operation name="getSubscriberInfoByMSISDN") and a form on that web service, all of which went very nicely. But! When I ran the form, inserted the value ("3546933599") into the parameter and pressed submit.... => "ORA-01403: no data found"
The debug action displays very limited information and sheds no light on the problem :( Multiple attempts, on recreating the project from scratch, have resulted in the same utter failure! Needless to say, this nulls the affect of my Prozac proscription....
Is there anybody out there who can help me and defend APEX's reputation?

Misterious "ORA-01403: no data found" error

Hi,
I've been searching through the forum and the Internet with no results, so I'm posting here hoping you can help me.
Here is the situation: I had a page 30 with a tree branching to a form on a view.This worked fine until one day that suddenly, we got the "ORA-01403: no data found" error when loading the page. I guess that's normal, since the form shows the data filtered in the tree (in the tree we click on an element and pass its ROWID to the form), and when we load the page no ROWID is selected. So, the first question would be, how can I manage this situation? My first option was to have a condition in the Automatic Fetch for the Form, so that it's executed only when the ROWID item is not null. It worked a couple of times. After a while, it crashed again.
Tired of trying things, we decided to copy this page 30 to another page (page #80). Surprisingly, page #80 worked meanwhile #30 crashed. And they are completely the same, the data has not changed either.
Could it be that page #30 somehow is corrupted? It's really strange that the same exact copy of the page works with one ID but not with another one.
Has someone experienced this situation? it makes me feel like the app is unsecure and unstable. Any ideas, please?
Apex version: 4.1.1 on APEX listener.
Thanks,
Elena.

fac586 wrote:
Elena.mtc wrote:
Thanks for your response. The form is a single row (a form on a table or view). Here is what I've found out thanks to your tips:
It affects to all the three users that I have access with.Try it with a new user that has never accessed the page before.
I used the debug mode (new to me, so I'm kind of slow on this, still) and wrote an exception message on the Automatic Fetch Row and I managed to know the ROWID that the fetch process is using in the where clause. Of course this ROWID does not exist in the table, so the first question that comes to my mind is "how come and from where is the page getting this ROWID?". I don't know and can't comment because I can't see the app. ;-)
If the ROWID is stored in an item, check the Maintain session state property isn't set to Per User.I changed this and seemed to work. But it crashed later. I made a computation process to set to null the rowid's when loading the page. After reset, I deleted the computations (due to application functionality) and it worked. However, I do not trust this page anymore. So we created a new fresh app and copied this page. Luckily we are on development environment :)
>
So, I made a computation to initialize to null the item that saves the ROWID, and now it worked.
This page that I'm testing on is #30, but the valid page is #80 (it has changes made on the look and feel of the page). So, I deleted page #30, and copied page #80 (which works perfectly) into #30. And it crashes again (obvius, since it doesn't have the computation that gives null to the rowid item). What's "interesting" is that I still see the exception message I wrote in the older version of page #30. So, it seems that some values need to be purged and that the delete is not clean, but how? I'm not entirely clear on what you've been doing there, but it does indeed all sound rather odd.
I suspect that you wouldn't be able to reproduce this problem on apex.oracle.com. However, it would probably be helpful if you could upload the app and provide developer credentials to the workspace so we could see how it works and if there's anything obvious (or not) that might cause this problem.Unluckily I cannot do this. Thank you anyway for the help, it's hard to explain when something so weird happens.
Thanks!
Elena.

ORA-01403 NO DATA FOUND ERROR AFTER SELECTING PORTAL LINK TO CALL FORM

I have a portal application link that I use to call a form. The field on this
form gets populated based on a bind variable that is passed in by the link.
This was working 2 weeks ago but now when I click on the link to call the form
I am receiving the following error "AN UNEXPECTED ERROR OCCURRED ORA-01403 - NO
DATA FOUND". This happens in more than one application where I set this type
of link to call a form. Anyone have any ideas?!!

Hi Andy,
Thank you very much for your time!
The fields in the form are all right. The fields get filled in perfectly in most of the cases, only those few rows don't :(
However, now that you wrote of the process of row fetching, I think that maybe I have an idea of what is happening. My table has two primary keys (two fields together make the primary key, I don't know how it's called in English), one of them is a date. (I know that this is quite a bad practice, but, much to my regret, I cannot change it.) Now, this date is in YY-MON-DD format, which is used by my language.
One of this dates is from 1800's. As my report shows it, the year gets truncated to the last two character. APEX passes this value into the field of the form using varchar2, and when it tries to cast it back to YY-MON-DD format, then it supposes it's from 1900's instead of 1800's. With 19xx however it doesn't find my field.
Does this sound logical? It seems logical to me, but I am a beginner... :(
Still, if this is the core of the problem, it's most possibly not the only problem, because I have dates from 19xx which can't identify their rows... But I am suspicious because of these date things. If you have any idea then please let me know.
Thanks,
Eszter

ORA-01403: no data found Error in PLSQL code raised during plug-in processing.

Hello OTN community,
We are having the access to APEX problem. a New user was setup to access the APEX application. When I test to login as a new user, I get the message "ORA-01403: no data found Error in PLSQL code raised during plug-in processing.". When click OK to the disply message, the application will take me out of the sstem. I need help to even understand what is happening. I didn't develop the application, there is no documentation for this application, I am just supporting the application whenever there is a problem and I am new to APEX. As you can see I need help to figure this thing out. Your help is dearly appreciated.
Thank you OTN

Try to check the query that is executed and check if there is data or not

ORA-01403: no data found

I am trying to make Form on a Table with Report.
And my Form is ok, I can successfully insert data. But the problem is report. When I click
on EDIT button, when I want to change inserted data, I get error message:
ORA-01403: no data found
Error Unable to fetch row.
Thanks!!!

Hi,
I am getting the following error ORA-01403 no data found. I have a hidden item called Temporary item which i created as i have a report that appears with additional information when clicked on show_detail. I created this item by looking at this:
http://htmldb.oracle.com/pls/otn/f?p=11933:13:2667331074727537::NO:RP::
At the top of page 24 i have a text box and a search button Go that presents the report that matches the number that the user will type in the text box. I have created a branch to the same page. In my Report region i have code that will select the information from the database where id = :P24_SEARCH_ID
P24_SEARCH_ID is the text box.
I tried inserting in the branch> set TEMPORARY_ITEM to values P24_SEARCH_ID and then insert id=:TEMPORARY_ITEM in the region , but this would not work.
Sometimes the Go button works but when i log out and log back into apex and try running it, i get the error
Any suggestions as to how i can make it work always?
Monica

Uploading a CSV file and getting Error ORA-01403: no data found in V4.1.1.

I have an issue where myself and another user are unable to upload a csv file to my application using the "File Browse" page item in V4.1.1. I get the following error, "Error ORA-01403: no data found".
This function was working perfectly last week prior to the upgrade of our APEX to V4.1.1 from V3. Other users are still able to upload the csv file, so the PL/SQL behind it must be ok.
So here is where I am up to with testing.
Tested the upload using my login on my PC – Fail
Tested the upload using my login on another PC – Fail
Tested the upload using other user’s login on my PC – Success
Tested the upload using other user’s login on another PC - Success
Any help would be greatly appreciated.
Cheers,
Greg

The offending piece of code was in a block of script that I used from an online sample when I was first setting up this upload script. A colleague had the same issue in another application and rewrote the script to resolve the issue, see below.
I'm still perplexed as to why the majority of users could run it ok, and there were only 2 of us that it errored on. But now it's working for all, and I can go back to building some cool stuff in V4.1.1.00.23.
-- Read data from wwv_flow_files
select blob_content into v_blob_data
from wwv_flow_files
where last_updated = (select max(last_updated) from wwv_flow_files where UPDATED_BY = :APP_USERID)
and id = (select max(id) from wwv_flow_files where updated_by = :APP_USERID);
-- Rewritten to the following, which works.
select blob_content into v_blob_data
from wwv_flow_files
where id = (select ID from wwv_flow_files
where UPDATED_BY = :APP_USERID
and LAST_UPDATED = (select max(LAST_UPDATED) from wwv_flow_files where UPDATED_BY = :APP_USERID));

APEX.AUTHENTICATION.SESSION_VERIFY_FUNCTION - ORA-01403: no data found

Similar Messages

Maybe you are looking for