Best Practices For Household IOS's/Apple IDs

Greetings:
I've been searching support for best practices for sharing primarily apps, music and video among multple iOS's/Apple IDs. If there is a specific article please point me to it.
Here is my situation:
We currently have 3 iPads (2-kids, 1-dad) in the household and one iTunes account on a win computer. I previously had all iPads on single Apple ID/credit card and controlled the kids' downloads thru the Apple ID password that I kept secret. As the kids have grown older, I found myself constantly entering my password as the kids increased there interest in music/apps/video. I like this approach because all content was shared...I dislike because I was constantly asked to input password for all downloads.
So, I recently set up an individual account for them with the allowance feature at iTunes that allows them to download content on their own (I set restrictions on their iPads). Now I have 3 Apple IDs under one household.
My questions:
With the 3 Apple IDs, what is the best way to share apps,music, videos among myself and the kids? Is it multiple accounts on the computer and some sort of sharing?
Thanks in advance...

Hi Bonesaw1962,
We've had our staff and students run iOS updates OTA via Settings -> Software Update. In the past, we put a DNS block on Apple's update servers to prevent users from updating iOS (like last fall when iOS 7 was first released). By blocking mesu.apple com, the iPads weren't able to check for or install any iOS software updates. We waited until iOS 7.0.3 was released before we removed the block to mesu.apple.com at which point we told users if they wanted to update to iOS 7 they could do so OTA. We used our MDM to run reports periodically to see how many people updated to iOS 7 and how many stayed on iOS 6. As time went on, just about everyone updated on their own.
If you go this route (depending on the number of devices you have), you may want to take a look at Caching Server 2 to help with the network load https://www.apple.com/osx/server/features/#caching-server . From Apple's website, "When a user on your network downloads new software from Apple, a copy is automatically stored on your server. So the next time other users on your network update or download that same software, they actually access it from inside the network."
I wish there was a way for MDMs to manage iOS updates, but unfortunately Apple hasn't made this feature available to MDM providers. I've given this feedback to our Apple SE, but haven't heard if it is being considered or not. Keeping fingers crossed.
Hope this helps. Let us know what you decide on and keep us posted on the progress. Good luck!!
~Joe

Similar Messages

Best practice for universal iOS app? swf or swc?

Hi,
I'm trying to map out a framework for my assets which helps keep the memory load low at runtime for an iOS universal app and ran across the following article regarding swc files.
http://www.flashrealtime.com/compiling-big-air-swf-to-ios/
However, it's unclear as to how this method would be beneficial from a memory standpoint. Don't the files still get loaded at runtime?
Or should I be looking at swf files with the code stripped out and referenced from the main swf in the ipa? (sounds like more work!)
Please help educate a noob!
Thanks!

Thanks for the reply, Dave!
What I'm trying to figure out is the best way to achieve a fast load time for a universal app and was hoping I'd be able to instantiate only the necessary swc files as needed along with their appropriately linked classes. (swc#1 for iPhone 3G bitmaps and MovieClips, swc#2 for iPhone4S, etc...) Seems this isn't possible now.
Anyone have some favorite they can share for fast app loads?
Thoughts on universal apps in general? I'm thinking maybe this isn't a good path anymore considering the beefy high-res screen on the new iPad...

IOS Update Best Practices for Business Devices

We're trying to figure out some best practices for doing iOS software updates to business devices. Our devices are scattered across 24 hospitals and parts of two states. Going forward there might be hundreds of iOS devices at each facility. Apple has tools for doing this in a smaller setting with a limited network, but to my knowledge, nothing (yet) for a larger implementation. I know configurator can be used to do iOS updates. I found this online:
https://www.youtube.com/watch?v=6QPbZG3e-Uc
I'm thinking the approach to take for the time being would be to have a mobile sync station setup with configurator for use at each facility. The station would be moved throughout the facility to perform updates to the various devices. Thought I'd see if anyone has tried this approach, or has any other ideas for dealing with device software updates. Thanks in advance.

Hi Bonesaw1962,
We've had our staff and students run iOS updates OTA via Settings -> Software Update. In the past, we put a DNS block on Apple's update servers to prevent users from updating iOS (like last fall when iOS 7 was first released). By blocking mesu.apple com, the iPads weren't able to check for or install any iOS software updates. We waited until iOS 7.0.3 was released before we removed the block to mesu.apple.com at which point we told users if they wanted to update to iOS 7 they could do so OTA. We used our MDM to run reports periodically to see how many people updated to iOS 7 and how many stayed on iOS 6. As time went on, just about everyone updated on their own.
If you go this route (depending on the number of devices you have), you may want to take a look at Caching Server 2 to help with the network load https://www.apple.com/osx/server/features/#caching-server . From Apple's website, "When a user on your network downloads new software from Apple, a copy is automatically stored on your server. So the next time other users on your network update or download that same software, they actually access it from inside the network."
I wish there was a way for MDMs to manage iOS updates, but unfortunately Apple hasn't made this feature available to MDM providers. I've given this feedback to our Apple SE, but haven't heard if it is being considered or not. Keeping fingers crossed.
Hope this helps. Let us know what you decide on and keep us posted on the progress. Good luck!!
~Joe

Best Practices for Team Collaboration using Adobe Captivate

With a team of 6 Instructional Designers, how can Adobe Captivate be approached where we can collaborate while producing e-learning material while maintaining a consistent look and feel of the e-learning we produce?
What are the best practices for a team of 6 IDs working and creating e-learning material in Captivate? Is there anything build-in that allows us to connect to the same libraries, templates, etc to share?
Please advise.
Thank you!
Susanne

Only some tips, never collaborated with someone else, being the solo teacher. You didn't mention which version you are using, what I write here is meant for CP7.
Be sure to prepare a theme and/or a template that will be used by everyone. A theme consists of master slides, object styles, skin editor. Master slides can have custom navigation shape buttons. In a template you can eventually also prepare different slides with placeholders, and eventually advanced actions etc. For CP6 and earlier that is the only way to reuse advanced actions, in Captivate 7 you can export shared actions that can be imported in any project for reuse.
A feature that few users know about are the external libraries. You can open the library of any project as an external library in another project. That is a good idea to store assets that you want to use in different projects: images, audio clips, video clips, eventually equations. The shared actions in a library can not (yet?) be used in another project however.
If you are on CP7 you have automatically the roundtripping with source Adobe Photoshop files and source Audition files, both from CC. That can also make collaboration lot easier if those assets are prepared in those applications. Will not expand on that, because I'm not sure you have the Creative Cloud applications.
Those are my two cents.
Lilybiri

Best practices for app store developer download

We use company-owned macs to develop iOS applications. We frequently need to access the app store to download free apps (such as Xcode and competitor's apps), but the developers don't want to enter their personal iTunes credentials on company macs to do this. The company does not want to enter their credit card to create a company-wide iTunes account for fear of weird charges ending up on their card. Furthermore, the reason Apple has logins to the app store is to tailor the experience to the individual, so having a company login for many people does not seem to be the way to go. What is the best practice for this? Does iTunes have an "Organization" level object and that entity can add iTunes users to it like the "Developer Teams" aspect for Apple developers?

I haven't done this, so I haven't solved the problem as such. But those organizations who I've seen mention it either just get free apps via this process:
http://support.apple.com/kb/HT2534
or use a corporate credit card with the accounts. You can use a single credit card for all the accounts, to the best of my knowledge. There's also a Volume Purchase Plan for businesses which can simplify matters:
http://www.apple.com/business/vpp/
I believe that a redemption code obtained through this program can be used to set up an iTunes Store account, but I'm not certain.
Regards.

Is there a website or PDF somewhere which discusses best practices for producing a children's picture book? I am mostly interested in requirements for good image format, resolution, etc.

Is there a website or PDF somewhere which discusses best practices for producing a children's picture book? I am mostly interested in requirements for good image format, resolution, etc.

There may be a few links in Apple Support, regarding articles about how to use iBooks Author
and iBooks Store, etc; these would be separated into two general categories by device used.
Since there is an iOS and an OS X version of each, you may have to look to see what Apple
Support says about the one you are interested in; and how far their database goes toward an
answer to your question. Otherwise, a general search engine approach may be necessary.
Not sure if anything along the lines of what you seek would be available in an App.
References to iBooks Author and iBooks Store, etc appear within these two categories in Support:
For Mac OS X:
http://www.apple.com/support/mac-apps/
For iOS:
http://www.apple.com/support/ios/
Appears a community host moved your earlier post into one of the iBooks Author or Store sections
after I'd replied to what otherwise may be a similar post. Not sure if the links to the Discussions area
of iBooks you are interested in, have similar questions or answers by others who'd visited previously.
Is there a website or PDF somewhere which discusses best practices for producing a children's picture book? I am mostly interested in requirements for good image format, resolution, etc.
In my reply to your earlier thread, prior to it being moved, those links to sections of iBooks Author, etc
are posted. You can also find them from the main Apple Support Communities page.
Sorry to not be of much help in this matter.
Good luck & happy computing!

Best Practices for Using Photoshop (and Computing in General)

I've been seeing some threads that lead me to realize that not everyone knows the best practices for doing Photoshop on a computer, and in doing conscientious computing in general. I thought it might be a good idea for those of us with some exprience to contribute and discuss best practices for making the Photoshop and computing experience more reliable and enjoyable.
It'd be great if everyone would contribute their ideas, and especially their personal experience.
Here are some of my thoughts on data integrity (this shouldn't be the only subject of this thread):
Consider paying more for good hardware. Computers have almost become commodities, and price shopping abounds, but there are some areas where spending a few dollars more can be beneficial. For example, the difference in price between a top-of-the-line high performance enterprise class hard drive and the cheapest model around with, say, a 1 TB capacity is less than a hundred bucks! Disk drives do fail! They're not all created equal. What would it cost you in aggravation and time to lose your data? Imagine it happening at the worst possible time, because that's exactly when failures occur.
Use an Uninterruptable Power Supply (UPS). Unexpected power outages are TERRIBLE for both computer software and hardware. Lost files and burned out hardware are a possibility. A UPS that will power the computer and monitor can be found at the local high tech store and doesn't cost much. The modern ones will even communicate with the computer via USB to perform an orderly shutdown if the power failure goes on too long for the batteries to keep going. Again, how much is it worth to you to have a computer outage and loss of data?
Work locally, copy files elsewhere. Photoshop likes to be run on files on the local hard drive(s). If you are working in an environment where you have networking, rather than opening a file right off the network, then saving it back there, consider copying the file to your local hard drive then working on it there. This way an unexpected network outage or error won't cause you to lose work.
Never save over your original files. You may have a library of original images you have captured with your camera or created. Sometimes these are in formats that can be re-saved. If you're going to work on one of those files (e.g., to prepare it for some use, such as printing), and it's a file type that can be overwritten (e.g., JPEG), as soon as you open the file save the document in another location, e.g., in Photoshop .psd format.
Save your master files in several places. While you are working in Photoshop, especially if you've done a lot of work on one document, remember to save your work regularly, and you may want to save it in several different places (or copy the file after you have saved it to a backup folder, or save it in a version management system). Things can go wrong and it's nice to be able to go back to a prior saved version without losing too much work.
Make Backups. Back up your computer files, including your Photoshop work, ideally to external media. Windows now ships with a quite good backup system, and external USB drives with surprisingly high capacity (e.g., Western Digital MyBook) are very inexpensive. The external drives aren't that fast, but a backup you've set up to run late at night can finish by morning, and if/when you have a failure or loss of data. And if you're really concerned with backup integrity, you can unplug an external drive and take it to another location.
This stuff is kind of "motherhood and apple pie" but it's worth getting the word out I think.
Your ideas?
-Noel

APC Back-UPS XS 1300. $169.99 at Best Buy.
Our power outages here are usually only a few seconds; this should give my server about 20 or 25 minutes run-time.
I'm setting up the PowerChute software now to shut down the computer when 5 minutes of power is left. The load with the monitor sleeping is 171 watts.
This has surge protection and other nice features as well.
-Noel

Best Practices for new iMac

I posted a few days ago re failing HDD on mid-2007 iMac. Long story short, took it into Apple store, Genius worked on it for 45 mins before decreeing it in need of new HDD. After considering the expenses of adding memory, new drive, hardware and installation costs, I got a brand new iMac entry level (21.5" screen,
2.7 GHz Intel Core i5, 8 GB 1600 MHz DDR3 memory, 1TB HDD running Mavericks). Also got a Superdrive. I am not needing to migrate anything from the old iMac.
I was surprised that a physical disc for the OS was not included. So I am looking for any Best Practices for setting up this iMac, specifically in the area of backup and recovery. Do I need to make a boot DVD? Would that be in addition to making a Time Machine full backup (using external G-drive)? I have searched this community and the Help topics on Apple Support and have not found any "checklist" of recommended actions. I realize the value of everyone's time, so any feedback is very appreciated.

OS X has not been officially issued on physical media since OS X 10.6 (arguably 10.7 was issued on some USB drives, but this was a non-standard approach for purchasing and installing it).
To reinstall the OS, your system comes with a recovery partition that can be booted to by holding the Command-R keys immediately after hearing the boot chimes sound. This partition boots to the OS X tools window, where you can select options to restore from backup or reinstall the OS. If you choose the option to reinstall, then the OS installation files will be downloaded from Apple's servers.
If for some reason your entire hard drive is damaged and even the recovery partition is not accessible, then your system supports the ability to use Internet Recovery, which is the same thing except instead of accessing the recovery boot drive from your hard drive, the system will download it as a disk image (again from Apple's servers) and then boot from that image.
Both of these options will require you have broadband internet access, as you will ultimately need to download several gigabytes of installation data to proceed with the reinstallation.
There are some options available for creating your own boot and installation DVD or external hard drive, but for most intents and purposes this is not necessary.
The only "checklist" option I would recommend for anyone with a new Mac system, is to get a 1TB external drive (or a drive that is at least as big as your internal boot drive) and set it up as a Time Machine backup. This will ensure you have a fully restorable backup of your entire system, which you can access via the recovery partition for restoring if needed, or for migrating data to a fresh OS installation.

Best Practice for FlexConnect Wireless roaming in MediaNet environment?

Hello!
Current Cisco best practice recommendations for enterprise MediaNet design, specify that VLANs be local to a switch / switch stack (i.e., to limit the scope of spanning-tree).
In the wireless world, this causes problems if you want users while roaming to keep real-time applications up and running. Every time they connect to a new AP on a different VLAN, then they will need to get a new IP address, which interrupts real-time apps.
So...best practice for LAN users causes real problems for wireless users.
I thought I'd post here in case there's a best practice for implementing wireless roaming in a routed environment that we might have missed so far!
We have a failover pair of FlexConnect 7510s, btw, configured for local switching for Internal users, and central switching with an anchor controller on the DMZ for Guest users.
Thanks,
Deb

Thanks for your replies, Stephen and JSnyder.
The situation here is that the original design engineer is no longer here, and the original design was not MediaNet-friendly, in that it had a very few /20 subnets bridged over entire large sites.
These several large sites (with a few hundred wireless users per site), are connected to an HQ location (where the 7510s in failover mode are installed) via 1G ethernet hand-offs (MPLS at the WAN provider). The 7510s are new, and are replacing older contollers at the HQ location.
The internal employee wireless users use resources both local to their site, as well as centralized resources. There are at least as many Guest wireless users per site as there are internal employee users, and the service to them consists of Internet traffic only. (When moved to the 7510s, their traffic will continue to be centrally switched and carried to an anchor controller in the DMZ.)
(1) So, going local mode seems impractical due to the sheer number of users whose traffic bound for their local site would be traversing the WAN twice. Too much bandwidth would be used. So, that implies the need to use Flex / HREAP mode instead.
(2) However, re-designing each site's IP environment for MediaNet would suggest to go routed to the closet. However, this breaks seamless roaming for users....
So, this conundrum is why I thought I'd post here, and see if there was some other cool / nifty solution I wasn't yet aware of.
The only other (possibly friendly to both needs) solution I'd thought of was to GRE tunnel a subnet from each closet to the collapsed Core / Disti switch at each site. Unfortunately, GRE tunnels are not supported in the rev of IOS on the present equipment, and so it isn't possible to try this idea.
Another "blue sky" idea I had (not for this customer, but possibly elsewhere in the future), is to use LAN switches such as 3850s that have WLC functionality built-in. I haven't yet worked with the WLC s/w available on those, but I was thinking it looks like they could be put into a mobility group, and L3 user roaming between them might then work. Do you happen to know if this might be a workable solution to the overall big-picture problem?
Thanks again for taking the time and trouble to reply!
Deb

Best Practice for SRST deployment at a remote site

What is the best practice for a SRST deployment at a remote site? Should a separate router such as a 3800 series be deployed for telephony in addition to another router to be deployed for Data? Is there a need for 2 different devices?

Hi Brian,
This is typically done all on one ISR Router at the remote site :)There are two flavors of SRST. Here is the feature comparison;
SRST Fallback
This feature enables routers to provide call-handling support for Cisco Unified IP phones if they lose connection to remote primary, secondary, or tertiary Cisco Unified Communications Manager installations or if the WAN connection is down. When Cisco Unified SRST functionality is provided by Cisco Unified CME, provisioning of phones is automatic and most Cisco Unified CME features are available to the phones during periods of fallback, including hunt-groups, call park and access to Cisco Unity voice messaging services using SCCP protocol. The benefit is that Cisco Unified Communications Manager users will gain access to more features during fallback ****without any additional licensing costs.
Comparison of Cisco Unified SRST and
Cisco Unified CME in SRST Fallback Mode
Cisco Unified CME in SRST Fallback Mode
â¢ First supported with Cisco Unified CME 4.0: Cisco IOS Software 12.4(9)T
â¢ IP phones re-home to Cisco Unified CME if Cisco Unified Communications Manager fails. CME in SRST allows IP phones to access some advanced Cisco Unified CME telephony features not supported in traditional SRST
â¢ Support for up to 240 phones
â¢ No support for Cisco VG248 48-Port Analog Phone Gateway registration during fallback
â¢ Lack of support for alias command
â¢ Support for Cisco UnityÂ® unified messaging at remote sites (Distributed Exchange or Domino)
â¢ Support for features such as Pickup Groups, Hunt Groups, Basic Automatic Call Distributor (BACD), Call Park, softkey templates, and paging
â¢ Support for Cisco IP Communicator 2.0 with Cisco Unified Video Advantage 2.0 on same computer
â¢ No support for secure voice in SRST mode
â¢ More complex configuration required
â¢ Support for digital signal processor (DSP)-based hardware conferencing
â¢ E-911 support with per-phone emergency response location (ERL) assignment for IP phones (Cisco Unified CME 4.1 only)
Cisco Unified SRST
â¢ Supported since Cisco Unified SRST 2.0 with Cisco IOS Software 12.2(8)T5
â¢ IP phones re-home to SRST router if Cisco Unified Communications Manager fails. SRST allows IP phones to have basic telephony features
â¢ Support for up to 720 phones
â¢ Support for Cisco VG248 registration during fallback
â¢ Support for alias command
â¢ Lack of support for features such as Pickup Groups, Hunt Groups, Call Park, and BACD
â¢ No support for Cisco IP Communicator 2.0 with Cisco Unified Video Advantage 2.0
â¢ Support for secure voice during SRST fallback
â¢ Simple, one-time configuration for SRST fallback service
â¢ No per-phone emergency response location (ERL) assignment for SCCP Phones (E911 is a new feature supported in SRST 4.1)
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps2169/prod_qas0900aecd8028d113.html
These SRST hardware based restrictions are very similar to the number of supported phones with CME. Here is the actual breakdown;
Cisco 880 SRST Series Integrated Services Router
Up to 4 phones
Cisco 1861 Integrated Services Router
Up to 8 phones
Cisco 2801 Integrated Services Router
Up to 25 phones
Cisco 2811 Integrated Services Router
Up to 35 phones
Cisco 2821 Integrated Services Router
Up to 50 phones
Cisco 2851 Integrated Services Router
Up to 100 phones
Cisco 3825 Integrated Services Router
Up to 350 phones
Cisco CatalystÂ® 6500 Series Communications Media Module (CMM)
Up to 480 phones
Cisco 3845 Integrated Services Router
Up to 730 phones
*The number of phones supported by SRST have been changed to multiples of 5 starting with Cisco IOS Software Release 12.4(15)T3.
From this excellent doc;
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps2169/data_sheet_c78-485221.html
Hope this helps!
Rob

Best practice for setting or detecting screen size?

Hi All,
Trying to determine a best practice for setting or detecting the screen size. For playbook and iOS, I can set them. But for Android, the number of devices is too large so I'd rather detect. My first choice is to use the stage.stageHeight and stage.stageWidth. This works fine if I set my stage properties with standard meta data:
[SWF(height="320", width="480", frameRate="64", backgroundColor="#010101")]
However, if I use the application descriptor file to set the stage dimentions (as suggested by Christian Cantrell here http://www.adobe.com/devnet/flash/articles/authoring_for_multiple_screen_sizes.html)
<initialWindow>
<aspectRatio>landscape</aspectRatio>
<autoOrients>false</autoOrients>
<width>320</width>
<height>480</height>
<fullScreen>true</fullScreen>
</initialWindow>
Then the stage.stageHeight and stage.stageWidth are not the correct numbers when my main class is added to the stage. Sometime after the main class is added to the stage, then those numbers are fine. Is there an event I can wait for to know that the stage.stageHeight and stage.stageWidth are correct?
Thanks in advance!

Hi Lee,
Thanks for the quick response! However, for some reason the heightPercent & widthPercent metadata tags are not working as expected for me.
I have a wrapper class that I target for compiling, WagErgApplePhone.as where I've got my metadata
[SWF(heightPercent="100%", widthPercent="100%", frameRate="64", backgroundColor="#010101")]
sets some stage properties
stage.quality=StageQuality.LOW;
stage.scaleMode = StageScaleMode.NO_SCALE;
stage.align = StageAlign.TOP_LEFT;
and instantiates my main class
var main:Main = new Main();
addChild(main);
my main class constructor even waits for the stage
public function Main(){
if (stage) init();
else addEventListener(Event.ADDED_TO_STAGE, init);
in my init function, stage.stageHeight traces out as 375 (expecting 320).
i have a function which is called via a button press event by the user, and stage.stageHeight traces out correctly (320) there. that's what makes me think that if i wait long enough, i can get the correct stageHeight before init/drawing. but i'm not sure what event to listen for, or if there's another trick.
if i use Capabilities.screenResolutionX and Capabilities.screenResolutionY the correct values are provided for mobile, but these values are not useful for the desktop and web version of the app. if there's no other solution, i'll execute different code depending on platform.
again, for reference, my app descriptor:
<initialWindow>
<aspectRatio>landscape</aspectRatio>
<autoOrients>false</autoOrients>
<width>320</width>
<height>480</height>
<content>bin-iOS/WagErgApplePhone.swf</content>
<title>WAG ERG</title>
<fullScreen>true</fullScreen>
<renderMode>cpu</renderMode>
</initialWindow>
looking forward to any other ideas to try out & thanks so much for your thoughts! if you want to really dig in, this is an opensource project at code.google.com/p/wag-erg/

Best Practice for Security Point-Multipoint 802.11a Bridge Connection

I am trying to get the best practice for securing a point to multi-point wireless bridge link. Link point A to B, C, & D; and B, C, & D back to A. What authenication is the best and configuration is best that is included in the Aironet 1410 IOS. Thanks for your assistance.
Greg

The following document on the types of authentication available on 1400 should help you
http://www.cisco.com/univercd/cc/td/doc/product/wireless/aero1400/br1410/brscg/p11auth.htm

Best practice for server configuration for iTunes U

Hello all, I'm completely new to iTunes U, never heard of this until now and we have zero documentation on how to set it up. I was given the task to look at best practice for setting up the server for iTunes U, and I need your help.
*My first question*: Can anyone explains to me how iTunes U works in general? My brief understanding is that you design/setup a welcome page for your school with sub categories like programs/courses, and within that you have things like lecture audio/video files and students can download/view them on iTunes. So where are these files hosted? Is it on your own server or is it on Apple's server? Where & how do you manage the content?
*2nd question:* We have two Xserve(s) sitting in our server room ready to roll, my question is what is the best method to configure them so it meets our need of "high availability in active/active mode, load balancing, and server scaling". Originally I was thinking about using a 3rd party load balancing device to meet these needs, but I was told there is no budget for it so this is not going to happen. I know there is IP Failover but one server has to sit in standby mode which is a waste. So the most likely scenario is to setup DNS round robin and put both xserves in active/active. My question now is (this maybe related to question 1), say that all the content data like audio/video files are stored by us, (We are going to link a portion of our SAN space to Xserve for storage), if we are going with DNS round robin and put the 2 servers in Active/Active mode, can both servers access a common shared network space? or is this not possible and each server must have its own storage space? And therefore I must use something like RSYNC to make sure contents on both servers are identical? Should I use XSAN or is RSYNC good enough?
Since I have no experience with iTunes U whatsoever, I hope you understand my questions, any advice and suggestion are most welcome, thanks!

Raja Kondar wrote:
wht is the Best Practice for having server pool i.e
1) having a single large serverpool consisting of "n" number of guest vm
2) having a multiple small serverpool consisting of less of number of guest vm I prefer option 1, as this gives me the greatest amount of resources available. I don't have to worry about resources in smaller pools. It also means there are more resources across the pool for HA purposes. Not sure if this is Official Best Practice, but it is a simpler configuration.
Keep in mind that a server pool should probably have up to 20 servers in it: OCFS2 starts to strain after that.

Best practice for exporting from iMovie '08 to iDVD

I am looking to find out what is the best practice for exporting from iMovie '08 to iDVD. I have read the other postings that give the basic howto (export to Media Browser then select the video in iDVD). However, my question is a little more technical. I have 1080i HD projects. I am interested in burning them to DVD in the best possible quality. What setting should I be using when I publish to Media Browser?
I am wondering about quality loss due to more than one conversion/compression. I suspect that when I export to the Media Browser then this is occurring. If I am not mistaken iMovie is using something like H.264 for this. Then, when I run iDVD I suspect it will it do another conversion/compression, I think to get to MPEG2. Not only could this result in a loss of quality but also it will take extra time. I am interested to know what others think about this.
Finally, I am looking to create DVDs for a lot of video. I am wondering if there are any USB or firewire hardware devices out there that could speed up the compression. I use the Elgato Turbo.264 when I want to encode to H.264 but I wonder if there is something similar for DVD creation.
Thanks in advance.

the standards for videoDVD are 720x480, and usually mpeg2 encoded..
so, your HiDef project HAS to be 'downsampled' somehow..
I would Export with Qucktime/apple intermediate => which is the 'format' your project is allready, and you avoid any useless 'inbetween encoding'..
iDVD will 'swallow' this huge export file - don't mind: iDVD cares for length, not size.
iDVD will then convert into DVD-standards..
you can 'raise' quality, by using projects <60min - this sets iDVD automatically to highest technical possible bitrate
hint: judge pic quality on a DVDplayer + TV.. not on your computer (DVDs are meant for TVdelivery)

What is the guideline and/or best practice for EMC setup on ASM?

We are going to use EMC CX4-480 for ASM storage on RAC. What is the guideline and best practice for EMC setup on ASM?
Thanks for the advice!

Probably a poor choice of words. Sorry.
So basically, I have gotten further, but I just noticed related problem.
I'm using the WebServices(WS) 1.0. I insert an account, then, on a separate WS call, I insert my contacts for the account. I include the AccountID, and a user defined key from the Account when creating the Contact.
When I look at my Contact on the CRMOD web page, it shows the appropriate links back to the Account. But when I look at my Account on the CRMOD web page, it shows no Contacts.
So when I say workflow or Best Practice, I was hoping for guidance on how to properly write my code to accomplish all of the necessary steps. As in this is how you insert an account with a contact(s) and it updates the appropriate IDs so that it shows up properly on the CRMOD web pages.
Based on the above, it looks like I need to, as the next step, take the ContactID and update the Account with it so that their is a bi-directional link.
I'm thinking there is a better way in doing this.
Here is my psuedocode:
AccountInsert()
AccountID = NewAcctRec
ContactInsert(NewAcctRec)
ContactID = NewContRec
AccountUpdate(NewContRec)
Thanks,

Best Practices For Household IOS's/Apple IDs

Similar Messages

Maybe you are looking for