Browsing web folders with xMII 11.5

I'd like to drill down into the web folder using BLS. I know its possible to do because the Navigation builder does this when you select the "..Files" button. Unfortunately the browser is in a java applet so I can't see how it works.
My concept is to loop through all folders, find the files and open them. I'm going to build a parser that will extract all the templates used in each web page. Basically I'm building a cross reference tool. The "Get File List" action block won't do it because it only works for a single folder and I need my BLS transaction to drill down to each sub folder when i supply it a parent.
Thoughts?

Hmm.... I had tried a similar thing at least a couple of times over the years. There was always something that got in my way though. I wish I could remember what it was.
Good luck to you.

Similar Messages

On certain web sites(with java applets embedded or rich content),sometimes browser hotkeys are beeing used with other functionality (eg.: youtube uses ctrl + tab for sliding between player controls).How can I prevent this?

On certain web sites(with java applets embedded or rich content),sometimes browser hotkeys are beeing used with other functionality (eg.: youtube uses ctrl + tab for sliding between player controls).How can I prevent this ?

Thanks for posting this!
I would only mention that your definition is incomplete for this -
Contextual selector A type of Style Sheet Selector that
and that it's most often referred to now as a Descendent selector, not a contextual selector. It's basically the same as the Compound selector that you have already defined....

Which of scanners works with browser as web camera with HTML5 API?

which of scanners works with browser as web camera with HTML5 API?

ntman,
[https://developer.mozilla.org/en-US/docs/Web/Guide/API/Camera MDN Camera API Guide] and [https://developer.mozilla.org/en-US/docs/Web/Guide/HTML/HTML5 Web Guide MDN] are both articles to get you started. I am not an expert in this, but there is a developer community on stackoverflow.com that helps specifically with Developing in Firefox. It may require the use of AngularJS. However it is difficult to prevent users from downloading images that are on sites, but again stackoverflow.com would have some great ideas.

Final Cut Server: Cannot connect to Java Web Start with a web browser

I get this exact error http://support.apple.com/kb/TS1610, but their steps do not fix it.
sudo cp /etc/apache2/sites/0000any_80.conf.default /etc/apache2/sites/0000any_80.conf
has me validate and then goes back to the prompt the other:
Xserve:~ admin$ sudo /Library/Application\ Support/Final\ Cut\ Server/Final\ Cut\ Server.bundle/Contents/Resources/sbin/post-install.sh
Stopping Final Cut Server services ...
launchctl: Error unloading: com.apple.FinalCutServer.fcsvr_ldsd
launchctl: Error unloading: com.apple.FinalCutServer.fcsvr_stored
Starting postgresql ...
Initializing database ...
could not connect to server: No such file or directory
Is the server running locally and accepting
connections on Unix domain socket "/tmp/.s.PGSQL.8820"?
connection failed, retrying (1) ...
-- updating: pxtraitclass
-- updating: pxperm
-- updating: pxgroup
-- updating: pxschema
-- updating: pxentitylinktype
-- updating: pxenum
-- updating: pxenumentry
-- updating: pxmdfield
-- updating: pxtrait
-- updating: pxmdgroup
-- updating: pxmdgrouphasfield
-- updating: pxeventstatus
-- initializing config package: base
-- updating: enum
-- updating: enumentry
-- updating: mdfield
-- updating: mdgroup
-- updating: mdgrouphasfield
-- updating: mdmap
Settings plist already present, not overwriting.
Starting Final Cut Server services ...
Configuring webstart for OS X Server on default site ...
web:Modules:array_id:php5module:enabled = yes
web:Modules:array_id:userdirmodule:enabled = yes
web:Modules:array_id:apple_userdirmodule:enabled = yes
web:Sites:array_id:*:80_:IfModule:_array_id:mod_rewrite.c:RewriteCond:_arrayindex:0 = "%{REQUEST_METHOD} ^TRACE"
web:Sites:array_id:*:80_:IfModule:_array_id:modrewrite.c:RewriteEngine = yes
web:Sites:array_id:*:80_:IfModule:_array_id:mod_rewrite.c:RewriteRule:_arrayindex:0 = ".* - [F]"
web:Sites:array_id:*:80_:IfModule:_array_id:mod_rewrite.c:RewriteRule:_arrayindex:1 = "^/FinalCutServer$ /~fcsvr/Sites/webstart/index.php [NC,L]"
service: This command still works, but it is deprecated. Please use launchctl(8) instead.
service: This command still works, but it is deprecated. Please use launchctl(8) instead.
Xserve:~ admin$
Help? I should point out this is my first experience with OSXserver and I am not exactly an advanced user.
Message was edited by: otterholt

Hi, this dind't help.
I can resolve host name, so it looks like DNS works:
If I typed: <IP address> or localhost or localhostname.local or hostname I stiil get the default OS X web page with services, but no service is available not I can't connect to FCS web start page.
I didn't change DNS records - it is default as it was after installation of system and FCs.

Multiple Web Sites with Personal Domain Names - Overview

I have read through the last 10 pages of these discussions and have almost worked this out, but I need some help.
Problem:
I want to publish and edit two separate web sites with their own, individual, personal web addresses
from the same user account on the same Mac using iWeb '08 (2.0.2) and my .Mac account
_So far:_
I have purchased and registered the two domain names (with Cheap-DomainRegistration.com)
I have configured the CNAME to point to web.mac.com, and "Set up a Personal Domain" in iWeb successfully, but using a separate Mac for each web site.
The two sites work great.
_What (I think) I need to know:_
(excuse me for copying these posts out, but I can't find a way to link them to this post)
1) Should I be using iWebSites as suggested by Old Toad (posted Jan 24 in response to StAnNe's "Multiple Websites--HELP!!!")?
I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
2) Should I be using Mireille's approach (also posted Jan 24 in response to StAnNe's "Multiple Websites--HELP!!!")?
Yes you are correct in the thought that with a family pack you can use different accounts and that is the easiest way to upload with one click to .mac. But it is still possible to publish differents sites to one .mac account if that is all one has. Even if the sites are in one domain file each purchased mysite.com domain name purchased can be pointed to a different page in the site
Look at it this way
Original Poster has
site1 page 1 page 2 and so on
then he/she has brothersite page 1 and so on.
They each have a domain name purchase wherever
then site1domain.com is forwarded to site 1 page1
and brotherdomain.com is forwarded to brothersite page 1.
Even though both sites are in the same file they do not have anything to do with each other.
This is one possibility there are others but for a novice user this could be the way to go for simplicity.
(Mireille, if you're there, can you clarify what you said - thank you)
3) Would I use Roddy's fix (posted Jan 23 in response to canadensis' "Publishing Multiple Websites?")?
Here's an example of how you can separate two websites that are on the same domain file.
Quit iWeb
Create a new folder on your desktop and call it "iWeb Sites".
Inside this folder create two more - Website A, Website B.
Go to Home Folder/Library/Application Support/iWeb and copy your domain file - command C
Paste this into folders A and B - command V - and also paste a copy of it somewhere else - like in Docs - in case you make a mistake!
Double click the domain file in the folder Website A - this will launch iWeb.
In the left column, delete site B, save and quit iWeb.
Double click the domain file in the folder Website B to launch iWeb.
Delete website A, save and quit.
Drop the iWeb sites folder into your Home Folder.
If you want quick access to this folder you can highlight it and do command L to create an alias to leave on the desktop.
From now on, to launch any site in iWeb you open its folder in the iWebsites folder and double click the domain file.
This is not necessary when you are working on only one site as iWeb saves the domain file of the last site you were working on to Home Folder/Library/Application Support/iWeb. When you open the iWeb application, the last site you worked on will be launched.
Summary:
I'm not sure if some of the answers in previous discussions allow for personal domain names, which is what I need.
I would be very grateful for any suggestions as I'm getting bogged down.
Many Thanks,
Jeff

When you said, "you don't need to do CNAME for both sites…", would this method still allow me to use personal web addresses for both sites?
Yes. With "Ordinary Forwarding" you normally just type your .Mac url (web.mac.com/username/sitename) into a form at the place where you have your name.
I thought I was using 'web.mac.com' as the 'www' CNAME (alias) for my personal domain name (web address), so that when someone typed in my personal domain name they would 'go' to the domain registration location, which would then pass it on to the .Mac server, where my web site is hosted.
That's exactly right. It's just not the only way to do that. Ordinary Forwarding is another way, but it differs in terms of what appears in the address bar of the browser. Either you will see web.mac.com/username/.... or, if you add "masking", you will see your personal name for all pages. The CNAME method results in a address bar that reads www.myname.com/sitename/pagename.html.
Am I way off?
All help gratefully received,
Jeff

Multiple domains names and web sites with only one SLS and one static IP

I tried to find a post on this topic but I still can't find what needs to be done.
SLS is configured for one domain with one web site and it's working well. We will call it domain1.com. Here is the config:
Static IP: 69.x.x.x
DNS setting under Server Admin:
hostname: server.domain1.com
Two DNS entries under domain1.com with:
www - alias - server.domain1.com
server - Machine - 10.0.1.x (fixe IP for server on LAN)
Web settings under Server Admin:
server.domain1.com - 10.0.1.x - Port 80
Domain1.com is managed with DynDNS Custom DNS Service with 1 record:
domain1.com - A-record - 69.x.x.x
I want to host a second domain (for a website) called domain2.com. It's also registred at DynDNS and I have custom DNS setting to configure.
What's need to be done to have both domains with seperate web site on SLS under DNS and Web settings (beside the fact that I will have 2 different folders with the website files in it). I understand that I will need a new entry in the DNS for the new domain (domain2.com) and also an entry in the Web Service pane. But what are the details.
Thanks.

When you said, "you don't need to do CNAME for both sites…", would this method still allow me to use personal web addresses for both sites?
Yes. With "Ordinary Forwarding" you normally just type your .Mac url (web.mac.com/username/sitename) into a form at the place where you have your name.
I thought I was using 'web.mac.com' as the 'www' CNAME (alias) for my personal domain name (web address), so that when someone typed in my personal domain name they would 'go' to the domain registration location, which would then pass it on to the .Mac server, where my web site is hosted.
That's exactly right. It's just not the only way to do that. Ordinary Forwarding is another way, but it differs in terms of what appears in the address bar of the browser. Either you will see web.mac.com/username/.... or, if you add "masking", you will see your personal name for all pages. The CNAME method results in a address bar that reads www.myname.com/sitename/pagename.html.
Am I way off?
All help gratefully received,
Jeff

Please, how can I make Web Folders work?

We have iFS 1.1.9 running with Oracle 8.1.7 and Apache on a W2K
Server. Everything is great, fine, beautiful but Web Folders
(WebDAV) aren4t working. And yes, I4ve used the same URL I use
to access via browser (http://<server>/ifs/files). When I try
create a Web Folder from a W2K client, I get this quite wise
message (after entering my user/pwd):
"the name of the folder is incorrect."
"use another name"
When I try from a W95 client, I get the same but also a log file
(wecerr.txt) is generated. Below is its content. It doesn4t say
much to me but maybe to someone...
11/01/2001 15:57:27
HTTP 404 Not Found
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<HTML><HEAD>
<TITLE>404 Not Found</TITLE>
</HEAD><BODY>
<H1>Not Found</H1>
The requested URL /_vti_bin/shtml.exe/_vti_rpc was not found on
this server.<P>
<HR>
<ADDRESS>Apache/1.3.12 Server at demowf Port 80</ADDRESS>
</BODY></HTML>
I4d like to stress the vital importance of Web Folders. They are
essencial to make iFS a competitive solution, since they cover
the lack of ODMA support. Documentum knows that and many
customers won4t use iFS if they can4t save their MS-Office files
directly into it.
I4ve already read other postings and I saw I4m not the only one
in this situation.
Any, any help would be really appreciated.
[]s
Vinicius Amaral

hi --
one thing to make sure of is that you're not using a proxy to
connect to the dav server, since most proxies are not DAV-
compliant right now.
if that's not the problem, could you post the jserv.log file
from the server?
thx.
-ilya
We have iFS 1.1.9 running with Oracle 8.1.7 and Apache on a W2K
Server. Everything is great, fine, beautiful but Web Folders
(WebDAV) aren4t working. And yes, I4ve used the same URL I use
to access via browser (http://<server>/ifs/files). When I try
create a Web Folder from a W2K client, I get this quite wise
message (after entering my user/pwd):
"the name of the folder is incorrect."
"use another name"
When I try from a W95 client, I get the same but also a log file
(wecerr.txt) is generated. Below is its content. It doesn4t say
much to me but maybe to someone...
11/01/2001 15:57:27
HTTP 404 Not Found
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<HTML><HEAD>
<TITLE>404 Not Found</TITLE>
</HEAD><BODY>
<H1>Not Found</H1>
The requested URL /_vti_bin/shtml.exe/_vti_rpc was not found on
this server.<P>
<HR>
<ADDRESS>Apache/1.3.12 Server at demowf Port 80</ADDRESS>
</BODY></HTML>
I4d like to stress the vital importance of Web Folders. They are
essencial to make iFS a competitive solution, since they cover
the lack of ODMA support. Documentum knows that and many
customers won4t use iFS if they can4t save their MS-Office files
directly into it.
I4ve already read other postings and I saw I4m not the only one
in this situation.
Any, any help would be really appreciated.
[]s
Vinicius Amaral

How do I use Edge Web Fonts with Muse?

How do I use Edge Web Fonts with Muse - is it an update to load, a stand alone, how does it interface with Muse? I've updated to CC but have no info on this.

Hello,
Is there a reason why you want to use Edge Web Fonts with Adobe Muse?
Assuming you wish to improve typography of your web pages, you should know that Muse is fully integrated with Typekit. This allows you to access and apply over 500 web fonts from within Muse. Here's how you do it:
Select a text component within Muse, and click the Text drop-down.
Select Add Web Fonts option, to pop-open the Add Web Fonts dialog.
Browse and apply fonts per your design needs.
Muse also allows you to create paragraph styles that you can save and apply to chunks of text, a la InDesign. Watch this video for more information: http://tv.adobe.com/watch/muse-feature-tour/using-typekit-with-adobe-muse/
Also take a look at these help files to see if they help you:
http://helpx.adobe.com/muse/tutorials/typography-muse-part-1.html
http://helpx.adobe.com/muse/tutorials/typography-muse-part-2.html
http://helpx.adobe.com/muse/tutorials/typography-muse-part-3.html
Hope this helps!
Regards,
Suhas Yogin

Error when trying to open a WEBI report with OpenDocument.jsp

I have a weird problem, i'm trying to open a WEBI report with OpenDocument.jsp and I get the following error message
An error has occurred: Could not find the document.
the weird thing is that this error only occurs when i use Internet Explorer. When i use the same link with Google Chrome, i see my report.
How do I make this work, our standard web browser is Internet explorer.
here is a sample link i use to call my report.
http://<server>:8080/OpenDocument/opendoc/openDocument.jsp?iDocID=AVGrgQALGJZGipKCfjPPZ3g&sIDType=CUID
Our BO environment is :
BO XI 3.1 sp2 fp 2.3
tomcat 5.5 front-end

Hi,
I don't know how much this solution will help you but it is worth trying.
SAP Note: 1198844
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3131393838343426]
Regards,
Bashir Awan

Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)

Fresh installation of Exchange Server 2013 on Windows Server 2012.
Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
your folders with your Outlook data file (.ost)" is displayed.
If I turn off cached Exchange mode, setting the email account to not
cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
time.
I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
Microsoft Exchange RPC Client Access service is running.
No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.

So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
like OutlookAnywhere - which I might add had their place under that scenario.
In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
users.
Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
certificate.
See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
there is a 3rd - I forgot, but you get the idea).
Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
Open Outlook - BOOM! It works... Was it as good for you as it was for me?
You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
Frustrating beyond reason - that should be Exchange's new slogan...
Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
PS
ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else...

Folders with forward slashes in the name not appearing in Mail.app Exchange

Has anybody else seen this? For folders with forward slashes in the name, such as "Meetings/Events", the folder shows up in Outlook Web Access and over Exchange in Entourage 2008, but not Exchange over IMAP with Mail.app in Snow Leopard. The folder shows up once I remove the forward slashes, such as "Meetings Events" or "Meetings-Events" or "Meetings and Events".
Is this a known issue, and is there a fix besides renaming the folders?

In Unix the forward slash is an illegal character for a filename. In general you should avoid using it as the forward slash is used in path names such as /Folder/File. Avoid using the colon as well because it's commonly used as part of a disk identifier in OS X.
This is not any different than avoiding the backslash in Windows filenames.

Problem with web.show_document with Jinitiator and Firefox

Not sure Firefox 2.0 is officially certified with Forms 9.0.4.1 and Jinitiatorbut regardless we have some users who want to use this combination. Everything seems to work fine except for the calls to web.show_document which opens a new browser window and displays some html etc.
The problem is that even though the client Forms JVM is Jinitiator (1.3.1.18 or .21) when the call to web.show_document occurs somehow the Sun Java Plugin starts and having the two JVM's at once causes a fatal crash in Firefox. Can anyone suggest a way to preven the second JVM from opening?
When the user uses the Sun Plug as the client Forms JVM there is no problem as the second JVM does not open. Unfortunately some users insist on Jinitiator with Firefox hence the problem. -quinn

James,
This whole applet embedded in a browser model for webforms is driving us batty at times. The list of problems includes:
1) Users are constantly tempted by browser controls and accidentally do all sorts of things to get them in trouble. This has included but not limited to using the navigation arrows, jumping off to read their email in the same window as the form and returning to a dead forms session, minimizing, resizing, blurring off to another window and then returning back by clicking on the title bar of the browser and wondering why the form doesn't tab etc.
Sure hobbling the browser by opening with limited functionality is a possibility but not a complete solution.
2) New versions of browsers seem to break something. Both IE 7 and Firefox 2 have their own problems with web.show_document, especially file associations such as CSV and DBF and trying to open things in Excel in IE7.Firefox seems to have less problems for some yet some some oddities like the one that started this thread (and 2.0 opening new windows in tabs by default instead of windows).
3) JVM jigsaw puzzle. Is it Jinit or Sun, which versions? Which combinations of browser version and JVM works.
4) General fragility of the whole architecture. Running a client JVM in a web browser on top of a PC Operating system connectiong to a forms server over a network embedded in a Java Container server on a full blown web server running on a unix operating system is pushing the bubble. Throw in the mix that any of these components can be combined in numerous ways makes one wonder how it works as well as it does.
Still users randomly getting dropped connections to forms server (network gltches?). General sluggishness (poorly written forms?). Periods of users with unduplicatable errors primarily network related it would appear.
General feel that it is not rock solid stable. Perusing metalink documents on performance and tuning gives too much and too general info to troubleshoot so just shrug shoulders and say 'network problem'.
What's the solution? Java webstart would seem to help at least with the browser realted issues but is that supported and documented how to use yet. Also we'd lose web_show_document which is critical (could it be replaced by webutil calls to open browser?).
-quinn

WEB.show_document with MAILTO in IE8 - Navigation Cancelled message

When generating an email from within Oracle Forms 10g using:
WEB.show_document('mailto:'||'[email protected]'||'?subject='||'test msg'||'&body= 'test body','_SELF');
An IE8 window pops up with a message saying 'Navigation to the webpage was cancelled'.
The test email does appear separately, but if the email is generated a second time, the email will not be generated unless the window saying 'Navigation to the webpage was cancelled' was manually closed before the second email generation.
If we try the same test in our IE7 browser, the email pops up without an IE window coming up in the background (as expected).
We have tried changing the last parameter to _BLANK and also excluding it altogether, neither option works properly in IE8.
What code can I use to generate an email within IE8 & IE7 without the extra browser window appearing in the background?

Ok - so I've had a TAR logged with Oracle since before asking my colleague to post the same query on here.
As of a couple of days ago Oracle were able to reproduce the same issues using a simple test case. Yesterday they came back with the first part of a fix and updated "Note 1075355.1 - How To Use WEB.SHOW_DOCUMENT To Open Multiple Pages In The Same Browser" accordingly.
Basically if you are running IE8 on Windows XP and want to use the WEB.SHOW_DOCUMENT with mailto to launch an e-mail you need to specify a named window instead of the regular parameters which are: self, parent, top, blank
So you would need to use something as below where the word CUSTOM can be anything.
WEB.show_document('mailto:'||'[email protected]'||'?subject='||'test msg'||'&body=' ||'test body','CUSTOM');
However this does not appear to fix the issue for IE8 when running on Windows 7.
Below are other security settings that were recomended and we tried (but I don't think they had any effect):
1. In IE 8 go to menu Tools -> Internet Options -> Security -> Sites ->
- Add this website to the zone :
mailto
- Uncheck "Require server verifcation (https:) for all sites in this zone."
- Click Add
2. In IE 8 go to menu Tools -> Internet Options -> Security -> Custom level
- Set 'Display mixed content' to Enable.
Anyway hopefully this information may be useful to anyone else experiencing the same issues - I'm kinda surprised that this hasn't come up and I am interested to hear how other people send email from Forms 10G or 11G applications?

Page Viewer Web Part with horizontal scrollbar

Hi,
I added a page viewer webpart to a sharepoint 2013 website and placed a reporting services report url on it, however in some users the browser shows a horizontal scroll bar and cuts the report area. This is not version related because
I can see it well in IE10 in one user and in others it shows the reported problem.
Seems to be browser settings. Any ideas?
Thank you

Hi,
According to your post, my understanding is that some users’ browser shown a horizontal scroll bar in the page view web part.
You can disable the horizontal using the CSS style as the following.
<style type="text/css">
#WebPartWPQ3 {
OVERFLOW-X: hidden !important
</style>
Note: the WebPartWPQ3 is the webpart ID.
You can find the ID as the following thread:
http://sharepoint.stackexchange.com/questions/29649/disable-horizontal-scroll-bar-on-navigation-web-part-in-sharepoint-2010
Instead of using page viewer web part, you can also use the content edit web part with IFrame, and some JavaScript to achieve it.
For more information:
http://majidbaig.blogspot.in/2012/07/page-viewer-web-part-dynamic-height.html
There is a similar thread for your reference.
http://stackoverflow.com/questions/368480/removing-scrollbars-from-content-editor-page-viewer-webpart
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

How to create web services with complex objects as parameters

Hi,
Not sure if this is the right place, but...
I'm using Netbeans 5.5 and trying to learn web services.
Creating a simple web service with simple parameters like strings and integers is nice and easy. I'm now trying to take the next step, and create a web service with a more complex schema as a parameter.
I've tried two approaches, and hit dead ends on both:
(1) Define my complex schema as an xsd file, and then create a WSDL file. Creating the schema and saving it in my EFB project works fine; when I try to create a new WSDL file, the IDE gives me a button to import external schemas - which is where the problem is: the Browse simply won't find my newly created schema file.
(2) Define a Java class (in this case, it's a fairly simple example containing a single ArrayList), and then use the IDE to generate a web service from Java. The IDE does this fine, but I now have no idea how to consume or test the web service - I don't know where to look for the WSDL that has presumably been generated, and I'm also a bit iffy over what answers to give the WSDL creator about port names etc.
Ideally, I'd prefer to get approach 1 to work - can someone point me in the direction of a sensible tutorial for these things?
(Happy to carry on using Netbeans 5.5 or to revert to Sun Studio Enterprise, which I was playing with before.)
All help appreciated, Thanks

- For NetBeans related questions, nbusers mailing list is more suited. It is often visited by NetBeans experts.
http://www.netbeans.org/community/lists/top.html
...[email protected]
The NetBeans users mailing list. General discussion of NetBeans use, this is the place to ask for help and to help others.... (There is a 'Subscribe' button next to the above that you can use to subscribe to the list).
Can you try posting this question on nbusers list?
- SJSE 8.1 is based on an older version of NB (NB5.0).
You should definitely continue with NetBeans, since all development is now being done in NetBeans; all the major JSE modules have been moved to opensource at netbeans.org and are all being developed there. There are as yet no future plans to work on further releases for JSE.
Please check out http://www.netbeans.org for more details.

Browsing web folders with xMII 11.5

Similar Messages

Maybe you are looking for