Build Hierarchy with nodes with ABAP for custom Infoobject

Hi,
Need to build hierarchy with nodes with abap for custom infoobject.
Thanks

Hi,
Using information from:
http://help.sap.com/saphelp_nw04/helpdata/en/fa/e92637c2cbf357e10000009b38f936/content.htm
you can bulid flat file with hierarchy data and then load in into BW...
Krzys

Similar Messages

Not able to load text master data for customer infoobject

Hi Guys,
I am not able load master data text to the customer infoobject.
I have a infoobject-A which is loaded with 1000 records, out of which only 100 records are with text and remaining are without text.
I have run a repair full request(extraction from ECC) and
i can see data till PSA(the 100 records which are with text are no more available in ECC now).remaining 900 records are available with text till PSA but not updating to target infoobject.
I have 3.X flow and i have checked transfer rules update rules and tried everythign from side-but no use-still not not working.
Please post your suggestions.
Thanks in advance
Regards,
Siva

Hi Ramanjaneyulu,
Transferrules screen shot:-
update rules
Regards,
Siva

In BEx, how to display hierarchy Upper Node with selected Lower Nodes only

Currently I am displaying the Cost Centre (GFL Responsibility Cost Centre) hierarchy in a workbook. I want to be able to filter on this hierarchy dynamically. E.g. the upper node must be displayed including the rolled up results for this node, together with a selection of the lower nodes e.g 2 nodes ( not all the lower nodes related to the upper node must be displayed in the query).
What's possible when filtering :
To filter on the 2 lower nodes only ( results are displayed as required)
Not possible:
When I include the higher node of the 2 lower nodes in the query, All the lower nodes of the higher node are displayed, and the filter selection of the lower nodes are over written.
This is logically what's expected when the higher node is included in the filter.
Creating a hierarchy variable gives the same problem, I am not able to filter on the hierarchy nodes as required.
 Upper Node
 Lower Node1 LowerNode2 LowerNode3
Filter the report for UpperNode and LowerNode 2 & 3 only
Thanking YOU in advance. Will reward points for the correct help

Hi
Do you want to show particular node or particular level ?
If you want particular node , then create hierarchy node variable and restrict to that node ( 3rd node)
If you want particular level, what does that mean say i am taking employee hierarchy and the hierarchy is as below.
Ihe setting that we have is to expand upto n levels but if yiou say i need level 2 what does that mean and how do you want to show in report ?
 A -
(level 1)
 B,C,D( --child of A ) --- level 2
 E(Child of B), F(Child of C) -
level 3.
Regards
vamsi

Issue with Third Party Adapter for custom JCA Connector in Oracle 11g.

Hi,
For a proof of concept, I have created my own JCA Connector. I have deployed this connector in Weblogic and it works as expected.
Now I am trying to call the JCA Connecter from the SOA Bus. For this I have create a SCA Composite with a simple Web Service to expose the composite, a Third Party Adaptor to wrap the JCA Connector and a Mediator to wire the Web Service and the Third Party Adapter together. For the Third Party Adapter I have created both the needed *.wsdl and _3P.jca file my self. The problem is that I could not find any documentation about the _3P.jca file, and it looks like it that this file is new for 11g.
After some puzzling and debugging I am able to deploy the SCA Composite with the Third Party Adapter. Though when I test the exposed Web Service with the Enterprise Manager I get errors and a stack trace. The problem is that the Record Converter I have created receives the default XMLRecord implementation (oracle.tip.adapter.fw.record.XMLRecordImpl) and not the implementation of the XMLRecord I have created my self.
So the question is does anybody know how to configure the Third Party Adapter so that it will use my custom implemenation of the XMLRecord interface (oracle.tip.adapter.api.record.XMLRecord) instead of the default implementation of the XMLRecord (oracle.tip.adapter.fw.record.XMLRecordImpl).
I would suspect that it should be configured in the _3P.jca file, though I don't know how. The following is the content of the current _3P.jca file I am using.
<adapter-config name="DiskAdapter" adapter="Disk Adapter" wsdlLocation="JCADiskConnector.wsdl"
 xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<record-converter className="com.osc.jcaadapter.convert.DiskRecordConverter"/>
<connection-factory location="jndi/diskcf" adapterRef=""/>
<endpoint-interaction operation="Send" portType="Send_ptt">
 <use-record-converter addonNamespace="http://somecomp.com/DiskAdapter"/>
 <interaction-spec className="com.osc.jcaadapter.impl.DiskInteractionSpecImpl">
 <property name="FunctionName" value="do-it"/>
 </interaction-spec>
</endpoint-interaction>
</adapter-config>So I am hoping that some one knows how you should configure the Third Party Adapter so it uses my own implementation of the XMLRecord interface.

Hi Simeon,
That is a good suggestion, and I would certainly try to do that if I was not making a proof of concept. It would solve my problem of not getting the sub class of the XMLRecord.
Though for making my proof of concept I found a 10g example that used sub classes of the XMLRecord, and that is why I wanted to get the same example to work on 11g.
The alternative of passing a parameter through with InteractionSpecs, is an interesting though can not solve this problem. I don't have a problem with the javax.resource.cci.Record, I can determine the implementation of that in the conversion class it self.
The problem is the XMLRecord generated by the Oracle SOA Adapter Framework, some how I need a way to influence that to generate the correct implementation of the XMLRecord.
So your post is certainly helpfull if I was not trying to get this specific problem to work :).
But I am afraid that I will end up in implementing your sugestion.
Regards
Maikel.
Edited by: M. Dierdorp on 13-aug-2010 6:34

Error in multiple operation with change document object for custom table

hi all,
I have developed a change document object for a custom table ZTEST and developed a report program for insertion, updation & deletion..everything works fine if I do only once ie. if I created only 1 entries. If I created 2 new entries , I am getting an Error "DUPREC:POS&Z3RL_TAB&Z3RL_TAB" and EXIT the transaction.
why I am getting this error??? is it not possible to do multiple operation with the change document???
kindly help.
Edited by: JaiKarthik on Apr 7, 2010 6:20 AM

 LOOP AT ts_mod INTO wa_mod.
 READ TABLE <i_itab> INTO <wa_tab> INDEX wa_mod-row.
* Select the existing entries in table Z3RL for change history
 SELECT SINGLE * FROM z3rl
 INTO wa_z3rl
 WHERE vkorg = <wa_tab>+3(4)
 AND zzkunnr = <wa_tab>+7(10).
* Move the old entries
 IF sy-subrc = 0.
 CLEAR ls_z3rl.
 ls_z3rl = wa_z3rl.
 ENDIF.
* Update the table
 MODIFY (viewname) FROM <wa_tab>.
 CLEAR wa_z3rl.
 wa_z3rl-mandt = <wa_tab>+0(3).
 wa_z3rl-vkorg = <wa_tab>+3(4).
 wa_z3rl-zzkunnr = <wa_tab>+7(10).
* Populate change tables
 CLEAR wa_change.
 wa_change-teilobjid = 'Z3RL'.
 wa_change-textart = 'TEST_2'.
 wa_change-textspr = 'EN'.
 wa_change-updkz = 'U'.
 APPEND wa_change TO ts_change.
*call the fM to log the values in CDHDR table.
 CALL FUNCTION 'Z3RL_WRITE_DOCUMENT'
 EXPORTING
 objectid = 'Z3RL'
 tcode = sy-tcode
 utime = sy-uzeit
 udate = sy-datum
 username = sy-uname
 planned_change_number = ' '
 object_change_indicator = 'U'
 planned_or_real_changes = 'U'
 no_change_pointers = 'U'
 upd_icdtxt_z3rl= 'U'
 n_z3rl= wa_z3rl
 o_z3rl = ls_z3rl
 upd_z3rl= 'U'
 lv_opt = ' '
 TABLES
 icdtxt_z3rl= ts_change.
 CLEAR : wa_mod, <wa_tab>.
 ENDLOOP.
Edited by: JaiKarthik on Apr 7, 2010 6:49 AM

Changing size area with help of mouse for custom tree control....

Hi,
I was creating a module pool program where I get tree control on left handise and HTML viewer on right hand side taking the help of example 'SAPSIMPLE_TREE_CONTROL_DEMO' . But I wanted the left hand side custom control adjustable i.e I move the size area by using mouse. (The way it happens in SAP standard screen) How can I do this ?
Please hlep.
Regards,
Jainam,

Solved it myself. I have to use split container for this....

Managing Hierarchy ( Leaves & Nodes ) by ABAP Code

Has someone documentation about the functions included into these function pool?
RSSHIER
RSSHMT
I need to change (or create new) leaves's position from node N to node M..... all by ABAP Code.
Ciao,
claudio
Message was edited by: Claudio Caforio

Hi Claudio,
its worth to look into function pool RSHI: It has a lot of functions to insert and delete nodes.
You have to find out the hierarchy id and nodeid of the leave you want to move. Find also the nodeids of the parents (node N and M). read the attributes of your leave. Then first delete leave under node n, then insert a new node under m and use the attributes of the deleted node. There are function modules for it. As far as I remember you have to call some hierarchy_init fms to work correctly.
Regards,
Juergen

Attribute Change Run- For Custom InfoObject

We have custom IO ZGN_PROD. For past few days attribute change run is not happening to this IO even though there are thousands of M version entries in P table. We have tried to use Report RSDDS_AGGREGATES_MAINTAIN for attribute change run but then also it is not going through. When we debug this report we found out that there is SQL statement in Report RSDDS_AGGREGATES_MAINTAIN which is not getting executed successfully.
SQL Statement is
UPDATE (<l_sx_itab>-name)
 SET objvers = rs_c_ojbvers-active
 changed = rs_c_changed-nothing
 where objvers = rs_c_objvers-modified
 AND changed = rs_c_changed-insert.
After execution of this SQL Sy-subrc is 4 instead of 0.
What could be the reason.
Can you please help me resolve this issue?
Thanks and Regards,
Samir

Haven't really looked at the object types in the process chain (we're still using event chains here for the most part), but I would be inclined to leave it as, and only change it if you have a problem.
The process chain tool drags steps into the chain by default, e.g drop and build index, attr change run. That doesn't mean you have to keep them in the chain. If you do not have hierarchies in your aggregates, you could remove the step. Now of course, the burden falls on you to remember to add it if you ever create an aggregate with a hierarchy in it.
Of course the next would be, if most of your queries use a hierarchy, you would probably want the hierarchy in the aggregate, otherwise the aggregate isn't going to be used.

Integration of Oracle and Snap Engage with SAP Cloud for Customer

Hello,
We need to integrate Oracle ( for opportunities, accounts and products ) with SAP C4C (Cloud for Customer).
And also Snap Engage ( for Sales Leads ) with SAP C4C (Cloud for customer ).
Is it possible to do it using custom APIs without engagement of any middleware system?
Thanks,
Shikha

Hi Shika,
In 1408, we introduced two features in C4Service to enable Sales Contact Center scenarios
1. Follow-up Sales documents from Tickets such as leads and opptys
2. Flexibility to relabel the Ticket work center to anything you want to call the object such as "Sales Inquiry"
What this allows you to do now is have a Sales Contact Center which can process inbound sales requests from customers in a centralized organization across all supported interaction channels of Email, Social, Chat, CTI/Phone Calls, and coming in 1411 SMS. Given SnapEngage already provides certified integration for C4Service, you can basically setup the solution to create the following business process
1. Customer contacts company via SnapEngage
2. SnapEngage automatically routes and creates a C4Service Ticket (Sales Inquiry)
3. Sales Contact Center agent can evaluate the inquiry and decide to create a follow-up lead or opportunity, which automatically copies the sales inquiry information into the lead or oppty
4. Lead and Opportunity can use standard territory management capabilities to route it to the appropriate sales person for follow-up
Good Luck!
Rei

Icon for customer field (field group)

Hello!
We have a need to follow-up one indicator through a customer field thanks to icon (like severities).
Do you know if it's possible to manage that with the field groups for customer field (I couldn't achieve that yet), or if we have to develop a dedicated webdynpro application for that?
Thanks!
Matthias

Hi
You need to use programs provided by SAP to handle dynamic behaviour.
The idea is to store your BDC data into a file. (If you are already reading
from a file, you still may have to write to a file suitable for the
program).
The SAP standad program can be called using a SUBMIT.
Here are two programs that you can try :
For creation of Customers : RFBIDE00
For creation of Vendors : RFBIKR00.
Regards
Neha

Are Pre-defined roles available for Customizing Synchronization?

Hello Guys,
In the SAP Help for Solution Manager: <<http://help.sap.com/saphelp_sm40/helpdata/en/48/647e3ddf01910fe10000000a114084/content.htm>>
it's mentioned that certain authorizations needs to be given for the involved people (admin & customizer), in both the SOLMAN & the component systems.
Also, its said that the role Application Consultant has all authorizations which are needed to set-up the Customizing Distribution in the SAP Solution Manager system & the authorization profile S_CUS_CMP can be used in the component systems.
But the AC role "SAP_SOL_AC_COMP" & "S_CUS_CMP" profile donot have all the necessary authorizations specified.
E.g: Role SAP_SOL_AC_COMP doesnot have project creation authority, whereas S_CUS_CMP has only some authorizations.
So my question is:
Along with these two, are there any other roles/profiles which complete the gaps & are readily available for usage ?
Last option would be to manually create & include the mentioned auth. objects.
Thanks & Regards
Chaitu

Hello Chait,
Regarding your two questions:
1) There are seperate roles available for customizing purposes, please check note 803142 Roles for satellite systems. The note administration list an xls with the respective roles for customizing distribution and comparison, namely
SAP_BC_CUS_ADMIN
SAP_BC_CUS_CUSTOMIZER
S_CUS_CMP
2) What I can recommend is the quick reference for setting up Customizing Distribution which is also part of the help documentation
http://help.sap.com/saphelp_sm40/helpdata/en/c4/533d4050d89523e10000000a1550b0/content.htm
Regards,
Doreen

Scenarios bundle and sample excel files for customer for SAP MDM

Hi:
In SAP MDM we have the business content which has the archive of the models like customer etc. We also get scenarios bundle with some sample data for customer to load into the above model.
I have the archive but not teh excel files/Scenarios bundle for customer. So I am not sure where can i download it from on SAP network. I could not locate them in the dump of software and not sure if it is not downloaded.
Thanks.
Regards,
Roopa

Hi Roopa,
Along with the Business content, SAP has also provided some additional helpful information about the same.
Field_Mapping_and_Check_Tables.zip
https://service.sap.com/~sapidb/012003146900000761622008E/Field_Mapping_and_Check_Tables.zip
MDM_Customer_Content.pdf
https://service.sap.com/~sapidb/012006153200000057662009E/MDM_Customer_Content.pdf
Apart from this, I was not able to find sample data for Customer Master, however, I have got sample repositories for Business Partner and Product Repositories.
MDM Business Partner Repository : consists of 21,000 records that are partly ITelO related. Each record is made up of the following attribute groups: Personal Data, Address Data, and Communication Data
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8048f213-0c0e-2b10-7c97-9d8bba9a7541
MDM Product Repository : consists of 100 records which are ITelO related. Each record is made up of the following attributes: Product Name, Product Group, Manufacturer
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9097399d-090e-2b10-d6b7-8881cef03b31
This info is avaliable from SAP on SDN itself.
Hope this info helps
Thanks and Regards
Nitin jain

MBeanMaker is not creating Schema folder in JAR file for custom authenticat

I have created a custom authentication provider.I am using following code of build.xml to generate jar file for custom authentication provider
<target name="build.mdf" depends="copyConfigFiles">
<java classname="weblogic.management.commo.WebLogicMBeanMaker" fork="true" failonerror="true">
<jvmarg line="-Dfiles=./build/mili -DMDF=./build/mili/MILIAuthenticator.xml -DcreateStubs=true"/>
<classpath>
<pathelement path="${java.class.path}"/>
<pathelement location="./build/mili"/>
<pathelement location="./lib/weblogic.jar"/>
<pathelement location="./lib/wlManagement.jar"/>
<pathelement location="./lib/jcifs-1.2.0.jar"/>
</classpath>
</java>
</target>
<target name="copySrcFiles" depends="build.mdf">
<copy todir="./build/mili" flatten="true" overwrite="true">
<fileset dir="./src/java">
<include name="**/MILI*.java"/>
</fileset>
</copy>
</target>
<target name="SecurityProviderJar" depends="copySrcFiles">
<java classname="weblogic.management.commo.WebLogicMBeanMaker" fork="true" failonerror="true">
<jvmarg line="-Dfiles=./build/mili -DMJF=./build/MiliSecurityProviders.jar"/>
<classpath>
<pathelement path="${java.class.path}"/>
<pathelement location="./build"/>
<pathelement location="./lib/wlManagement.jar"/>
<pathelement location="./lib/weblogic.jar"/>
<pathelement location="./lib/jcifs-1.2.0.jar"/>
</classpath>
</java>
</target>
Build.xml is running fine without giving any error,but it is not generating schema folder in the jar file.
beacause of that my custom authentication provider is not comming in admin console.
Kindly help me to resolve this.

Hi Ramesh,
Try out the following
1) Copy mediator.jar from SOA_HOME>/soa/modules/oracle.soa.mediator_11.1.1 to <MW_HOME>//soa/modules/oracle.soa.ext_11.1.1/classes
2) Goto <MW_HOME>//soa/modules/oracle.soa.ext_11.1.1/classes and run the following command:
a. jar -xvf mediator.jar
3) Now remove the jar file, i.e., mediator.jar from classes folder.
4) Restart the server.
Regards,
Srijith

How to create a node with attributes at runtime in webdynpro for ABAP?

Hi Experts,
         How to create a node with attributes at runtime in webdynpro for ABAP? What classes or interfaces I should use? Please provide some sample code.
I have checked IF_WD_CONTEXT_NODE_INFO and there is ADD_NEW_CHILD_NODE method. But this is not creating any node. I this this creates only a "node info" object.
I even check IF_WD_CONTEXT_NODE but i could not find any method that creates a node with attribute.
Please help!
Thanks
Gopal

Hi
   I am getting the following error while creating a dynamic context node with 2 attributes. Please help me resolve this problem.
Note
The following error text was processed in the system PET : Line types of an internal table and a work area not compatible.
The error occurred on the application server FMSAP995_PET_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_NODE~GET_STATIC_ATTRIBUTES_TABLE of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: GET_REF_TO_TABLE of program CL_SALV_WD_DATA_TABLE=========CP
Method: EXECUTE of program CL_SALV_WD_SERVICE_MANAGER====CP
Method: APPLY_SERVICES of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: REFRESH of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE_DATA of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~UPDATE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_VIEW~MODIFY of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMPONENT~VIEW_MODIFY of program CL_SALV_WD_A_COMPONENT========CP
My code is like the following:
TYPES: BEGIN OF t_type,
            CARRID TYPE sflight-carrid,
            CONNID TYPE sflight-connid,
         END OF t_type.
Data: i_struc type table of t_type,
dyn_node   type ref to if_wd_context_node,
rootnode_info   type ref to if_wd_context_node_info,
i_node_att type wdr_context_attr_info_map,
wa_node_att type line of wdr_context_attr_info_map.
      wa_node_att-name = 'CARRID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CARRID'.
      insert wa_node_att into table i_node_att.
      wa_node_att-name = 'CONNID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CONNID'.
      insert wa_node_att into table i_node_att.
clear i_struc. refresh i_struc.
select carrid connid into corresponding fields of table i_struc from sflight where carrid = 'AA'.
rootnode_info = wd_context->get_node_info( ).
rootnode_info->add_new_child_node( name = 'DYNFLIGHT'
                                   attributes = i_node_att
                                   is_multiple = abap_true ).
dyn_node = wd_context->get_child_node( 'DYNFLIGHT' ).
dyn_node->bind_table( i_struc ).
l_ref_interfacecontroller->set_data( dyn_node ).
I am trying to create a new node. That is
CONTEXT
- DYNFLIGHT
CARRID
CONNID
As you see above I am trying to create 'DYNFLIGHT' along with the 2 attributes which are inside this node. The structure of the node that is, no.of attributes may vary based on some condition. Thats why I am trying to create a node dynamically.
Also I cannot define the structure in the ABAP dictionary because it changes based on condition
Message was edited by: gopalkrishna baliga

Cannot build a flow graph with the customized options

Dear JMF-Gurus,
we implemented a DataSource for video capturing that is based on the lti-civil API, so that video capturing on Mac OS X should be possible.
When we try to build the flow graph, we get an jmf-error as described in the following log:
# JMF Version 2.1.1e
## Platform: Mac OS X, ppc, 10.4.9
## Java VM: Apple Computer, Inc., 1.5.0_06
## DataSource created: net.sf.fmj.media.protocol.civil.DataSource@a76306
$$ Profile: instantiation: 30 ms
## Processor created: com.sun.media.processor.unknown.Handler@21ec03
## using DataSource: net.sf.fmj.media.protocol.civil.DataSource@a76306
$$ Profile: parsing: 377 ms
## Getting the supported output formats for:
## RGB, 176x144, FrameRate=10.0, 24-bit, Masks=3:2:1, PixelStride=3, LineStride=528
## # of nodes visited: 50
## # of formats supported: 38
$$ Profile: getSupportedOutputFormats: 340 ms
## Building flow graph for: civil:?
## Building Track: 0
## Input: RGB, 176x144, FrameRate=10.0, 24-bit, Masks=3:2:1, PixelStride=3, LineStride=528
## Custom options specified.
## An output format is specified: YUV Video Format: Size = null MaxDataLength = -1 DataType = class [B yuvType = 2 StrideY = -1 StrideUV = -1 OffsetY = -1 OffsetU = -1 OffsetV = -1
## An output content type is specified: RAW
## Here's the completed flow graph:
      com.sun.media.parser.RawBufferParser@a075e6
         connects to: com.sun.media.codec.video.colorspace.JavaRGBToYUV@9c61d3
         format: RGB, 176x144, FrameRate=10.0, 24-bit, Masks=3:2:1, PixelStride=3, LineStride=528
      com.sun.media.codec.video.colorspace.JavaRGBToYUV@9c61d3
         connects to: com.sun.media.multiplexer.RawBufferMux@da7565
         format: YUV Video Format: Size = java.awt.Dimension[width=176,height=144] MaxDataLength = 38016 DataType = class [B yuvType = 2 StrideY = 176 StrideUV = 88 OffsetY = 0 OffsetU = 25344 OffsetV = 31680
$$ Profile: graph building: 113 ms
$$ Profile: realize, post graph building: 9 ms
$$ Profile: instantiation: 0 ms
## Processor created: com.sun.media.processor.unknown.Handler@654dec
##   using DataSource: VIC.MonitorCDS@e0c0b6
$$ Profile: parsing: 1 ms
## Getting the supported output formats for:
##   YUV Video Format: Size = java.awt.Dimension[width=176,height=144] MaxDataLength = 38016 DataType = class [B yuvType = 2 StrideY = 176 StrideUV = 88 OffsetY = 0 OffsetU = 25344 OffsetV = 31680
##   # of nodes visited: 48
##   # of formats supported: 37
$$ Profile: getSupportedOutputFormats: 97 ms
## Building flow graph for: null
## Building Track: 0
## Input: YUV Video Format: Size = java.awt.Dimension[width=176,height=144] MaxDataLength = 38016 DataType = class [B yuvType = 2 StrideY = 176 StrideUV = 88 OffsetY = 0 OffsetU = 25344 OffsetV = 31680
## Custom options specified.
## An output format is specified: H263P/RTP, 176x144, FrameRate=10.0
## An output content type is specified: RAW/RTP
XX Failed to realize: com.sun.media.ProcessEngine@8393ef
XX   Cannot build a flow graph with the customized options:
XX     Unable to transcode format: YUV Video Format: Size = java.awt.Dimension[width=176,height=144] MaxDataLength = 38016 DataType = class [B yuvType = 2 StrideY = 176 StrideUV = 88 OffsetY = 0 OffsetU = 25344 OffsetV = 31680
XX       to: H263P/RTP, 176x144, FrameRate=10.0
XX       outputting to: RAW/RTP
XX Error: Unable to realize com.sun.media.ProcessEngine@8393ef
## com.sun.media.BasicFilterModule@31477b: input format changed: RGB, 640x480, 24-bit, Masks=3:2:1, PixelStride=3, LineStride=1920
We guess that the problem was first the wrong input format (wrong video-size or wrong framerate) but this has been changed to the correct format.
The flow graph looks like correct, but it doesn't work anyway.
What does the last line in the log means, and are there any information were the problem good be located?

How were you even able to accomplish that? In my classpath I have fmj-nojmf.jar, jmf.jar and lti-civil.jar but I keep on getting this in my log.
# JMF Version 2.1.1e
## Platform: Mac OS X, i386, 10.5.4
## Java VM: Apple Inc., 1.5.0_13
## DataSource created: com.sun.media.protocol.javasound.DataSource@f98d58
I can't get it to find the civil datasource in fmj-nojmf.jar.

Build Hierarchy with nodes with ABAP for custom Infoobject

Similar Messages

Maybe you are looking for