Can't use font functions

I was using a downloaded trial version of Contribute 3 and
later purchased my own copy. But with the new (purchased) copy, I
can no longer use the font functions from the menu - when I go to
them it says "disabled". It's VERY frustrating, particularly as I
have written twice to the Help Centre more than a month ago and
have received no reply. Has anyone else experienced this problem
and has anyone found a solution?

Ok, with the limited knowledge I have I found a solution!
In Contribute 3 I clicked on "How Do I" and "Administer a
Website" - then "Define User Roles". Turns out I AM the site
administrator and could select those functions myself by altering
my own settings...

Similar Messages

  • Can not use TOUCH function on Nokia 6600 slide

    Can not use TOUCH function on Nokia 6600 slide-
    turned on sensor in phone settings, but when i touch the PHONE it does not work.
    Please, tell me how use this function or maybe my phone is out of order

    As long as your Sensor Settings are On within Menu, Settings, Phone, Sensor Settings then you just need to do the following -
    Tapping
    The tap function allows you to quickly
    mute and reject calls and alarm tones, and
    to display a clock just by double-tapping
    the back or front of the phone when the
    slide is closed.
    Select Menu > Settings > Phone >
    Sensor settings to activate the tap
    function and vibration feedback.
    Mute calls or alarms
    Double-tap the phone.
    Reject a call or snooze an alarm after
    muting it
    Double-tap the phone again.
    Display the clock
    Double-tap the phone.
    (If you have missed calls or received new
    messages, you must view them before you
    can see the clock.)
    Simply, if you double tap the screen when the slide is closed and you can see the clock appear then it is working.
    I hope this makes it clearer for you.
    Full Manual here - http://nds1.nokia.com/phones/files/guides/Nokia_6600_slide_UG_en.pdf

  • Can we use replace function in bursting control file?

    Hi All,
    Greetings!!!!!!!!!!
    Have a doubt can we use sql functions like replace,nvl,decode.. in xml bursting control file.
    Please let me know if there is a option.
    awaiting reply...
    Thanks
    Rajesh

    In Expression operator or in Filter, etc. you can type function name by hand.
    Oleg

  • Can we use Evaluate function in Prompt

    Hi all
    Can we use Evaluate Function in Dashboard Prompt?
    I need some exposure on how to use it.
    I am working on a HRMS-OLTP Source where I need to work with Oracle Functions from OBIEE.
    IF somebody can tell me that, It will be a favour for me....
    ThanQ
    Anand V

    Hi All,
    Here's an example of how to use evaluate. This use calls the Oracle TO_DATE function: EVALUATE('TO_DATE(%1,%2)' as DATE, '03/03/2009', 'MM/DD/YYYY')
    Here's how it works: EVALUATE( '<FUNC>' AS <DATATYPE>, VALUE1,VALUE2,etc)
    FUNC) Is the syntax for the function you are calling. Any parameters have to be replaced by %<number>, where number refers to the order in which you specify your parameters.
    DATATYPE) The datatype that the function will evaluate to. In this case, DATE.
    VALUE1) The latter part of the formula is a comma separated list of all the parameters used in the function. In this case, it's the date I want to cast
    VALUE2) This is the second parameter. You need as many as you referenced in your function. In this case, it's the date format.
    Good luck and if you found this post useful, please award points!
    Best regards,
    -Joe

  • Can we use Evaluate Function in Dashboard Prompt

    Hi
    Can anybody tell me
    Can we use Evaluate Function in Dashboard Prompt.
    If yes...How
    Thanks in Adv

    Yes ! You Can!
    while creating the dashboard prompt, under "Show" pick SQL results and you write the SQL statement and include the EVALUATE function.
    I have several such examples. Most of of dashboard pages are parameter driven.
    1. 1st paratmeter - users specify the dates
    2. 2nd parameter - constrains the results for the period specified in 1st paramter and my SQL for 2nd paramter looks like this -
    SELECT table1.column1
    FROM table, datedim1, table1,table2
    WHERE datedim1.date BETWEEN EVALUATE( 'TO_DATE(%1,%2)','@{presentation variable1}','dd/mm/yyyy') AND EVALUATE('TO_DATE(%1,%2)', '@{presentation variable 2}','dd/mm/yyyy')
    HTH
    Mahesh

  • Can we use SOUNDEX function in OWB?

    Hi
    Can we use SOUNDEX function in OWB. If yes then how?
    Regards
    Vibhuti

    In Expression operator or in Filter, etc. you can type function name by hand.
    Oleg

  • How can i use reuse_alv_fieldcatalog_merge function module

    I am using below steps for populating the final internal table.How can I use reuse_alv_fieldcatalog_merge function module in the place of declaring all these fields.How canI put title of the report in reuse_alv_fieldcatalog_merge function module.
    FORM BUILD_FIELDCATALOG .
      FIELDCAT-TABNAME   = 'IT_FINAL'.
      FIELDCAT-FIELDNAME = 'KUNNR'.
      FIELDCAT-SELTEXT_M = 'Customer Name'.
      FIELDCAT-JUST      = 'L'.
      FIELDCAT-KEY       = 'X'.
      FIELDCAT-DATATYPE  = 'C'.
      APPEND FIELDCAT TO I_FIELDCAT.
      CLEAR FIELDCAT.
      FIELDCAT-TABNAME   = 'IT_FINAL'.
      FIELDCAT-FIELDNAME = 'VBELN'.
      FIELDCAT-SELTEXT_M = 'Invoice Reference'.
      FIELDCAT-JUST      = 'L'.
      FIELDCAT-KEY       = 'X'.
      APPEND FIELDCAT TO I_FIELDCAT.
      CLEAR FIELDCAT.
      FIELDCAT-TABNAME   = 'IT_FINAL'.
      FIELDCAT-FIELDNAME = 'VKBUR'.
      FIELDCAT-SELTEXT_M = 'Sales Office'.
      FIELDCAT-JUST      = 'L'.
    FIELDCAT-KEY       = 'X'.
      FIELDCAT-DATATYPE  = 'C'.
      APPEND FIELDCAT TO I_FIELDCAT.
      CLEAR FIELDCAT.
      FIELDCAT-TABNAME   = 'IT_FINAL'.
      FIELDCAT-FIELDNAME = 'VKGRP'.
      FIELDCAT-SELTEXT_M = 'Sales Person'.
      FIELDCAT-JUST      = 'L'.
    FIELDCAT-KEY       = 'X'.
      FIELDCAT-DATATYPE  = 'C'.
      APPEND FIELDCAT TO I_FIELDCAT.
      CLEAR FIELDCAT.
      FIELDCAT-TABNAME   = 'IT_FINAL'.
      FIELDCAT-FIELDNAME = 'POSNR'.
      FIELDCAT-SELTEXT_M = 'Item No'.
      FIELDCAT-JUST      = 'L'.
      FIELDCAT-KEY       = 'X'.
      APPEND FIELDCAT TO I_FIELDCAT.
      CLEAR FIELDCAT.
      FIELDCAT-TABNAME   = 'IT_FIANL'.
      FIELDCAT-FIELDNAME = 'ARKTX'.
      FIELDCAT-SELTEXT_M = 'Item Description'.
      FIELDCAT-JUST      = 'L'.
      FIELDCAT-DATATYPE  = 'C'.
      APPEND FIELDCAT TO I_FIELDCAT.
      CLEAR FIELDCAT.

    Hello,
    It is very easy to use reuse_alv_fieldcatalog_merge.
    You try this it will work.
    example
    data:
    DATA : gv_repid        TYPE syrepid VALUE sy-repid .  " Report id
      PERFORM set_field_catalog USING gst_struct CHANGING lst_fieldcat.
    FORM set_field_catalog  USING uv_tab TYPE slis_tabname
                         CHANGING  xt_fieldcatalog TYPE slis_t_fieldcat_alv.
      CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
        EXPORTING
          i_program_name         = gv_repid
          i_internal_tabname     = uv_tab
          i_inclname             = gv_repid
        CHANGING
          ct_fieldcat            = xt_fieldcatalog
        EXCEPTIONS
          inconsistent_interface = 1
          program_error          = 2
          OTHERS                 = 3.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDFORM.                    " set_field_catalog_spec

  • How can I use 3D function in Photoshop CS6 (student package)?

    Please let me know how can I use 3D function in Photoshop CS6 (student package)?
    Thanks,

    Thanks so much for your helpful reply.
    Now I' ve already installed Adobe Creative Suite 6 Production Premium (Student Package), Extended included. But when I open Photoshop CS6, there' s still no 3D function in menu bar.
    Would you please tell me how to activate this function?
    Thanks,

  • Can I use "dvt" function for customizing the chart format in OBIEE 11g?

    Hi,
    ".pcxml" file cannot be found in OBIEE11g. However, can I use "dvt" function for customization? If yes, how?
    Reference for dvt function:
    http://docs.oracle.com/cd/E23943_01/apirefs.1111/e12418/tagdoc/dvt_pieGraph.html

    Hello,
    I know it's possible, because i already found some blogs about changing the chart colors and turning off the animated graphs.
    <Graph visualEffects="NONE" animationDuration="0">
    But we want to alter more chart options, like make a bar chart default stacked. In 10G this was possible. I think this is also
    possible in 11G through the dvt-graph-skin.xml, but what i want to know is, is there a document that explains which tags you could use in this file.
    It would be great to get some help on this.

  • How can i use this  function module

    Hai
    How can i use this function module /SAPHT/SALES_ORDER_READ, already apply the some parameters in this function module, but it shows the error , please tell me, how to declare the parameters in this function module ,
    thanks
    neelima

    Hi
    For a particular sales order,you have to pass the order number and the item number in the sales order.
    It will display the rest of the values which u can capture them using internal tables.
    Regards,
    Vishwa.

  • Elements 11 Organizer window is truncated at top, on iMac running 10.9.2, so I can't use Share function, etc.

    Elements 11 Organizer window is truncated at top, on iMac running 10.9.2, so I can't use Share function, etc.

    Thank you very much.  I changed the resolution from 2048 x 1152 to 1600 x 900, and it showed the bar with the Import, Media ... Create, Share buttons, but did not show the bar at the very top with the red, yellow and green buttons for closing, hiding and maximizing the window. 
    Then I noticed that Apple had an update to Mavericks available.  Since I installed that, I can set the resolution back to 2048 x 1152 and still see the Import, etc. bar.  I can live without the Close and Maximize buttons, but it does seem like there is a bug lurking here that either Adobe or Apple needs to fix. 

  • Can i use malloc function while using DLL created from C program

    Hi,
    I have written a simple program in C , which uses malloc function for allocating memory for the array.When iam calling that DLL using call library function node in labview, it is not giving any output, my doubt is can we use malloc function in C program from which we will create DLL and is called in labview? I am attaching my C code and DLL and also labview file please tell me where i am doing wrong?
    Thanks & Regards,
    Vishnu
    Attachments:
    first.zip ‏1010 KB

    Hi Vishnu,
    There's no problem using the Malloc function in C and call it as a DLL in LabVIEW.
    But LabVIEW has a different memory management than C.
    It is probably not recommended to allocate array memory in C for labVIEW arrays
    You can use initialize array in LabVIEW instead.
    Good luck
    Van L
    NI Applications Engineer

  • Can I use table function inside Dynamic query ?

    Dear Gurus,
    I have following code
    DECLARE
    TYPE CRITERIA_LIST_TABLE AS TABLE OF VARCHAR2(20);
    OtherNoList CRITERIA_LIST_TABLE; /* CRITERIA_LIST_TABLE is index by table*/
    QUERY_STRING VARCHAR2(4000);
    BEGIN
    OtherNoList := CRITERIA_LIST_TABLE();
    SELECT DISTINCT REGEXP_SUBSTR('1,5,6,4', '[^\,]+',1, LEVEL ) BULK COLLECT INTO OtherNoList
    FROM DUAL
    CONNECT BY LEVEL <= REGEXP_COUNT('1,5,6,4', '\,') + 1 ;
    QUERY_STRING := 'INSERT INTO TAB1 (C1,C2) '||
    'SELECT C1,'||
    'C2 '||
    'FROM TAB1 ,'||
    'TABLE( '||
              'CAST (OtherNoList AS CRITERIA_LIST_TABLE) '||
                   ') OTHRNOS '||
    'WHERE TAB1.C1 = OTHRNOS.COLUMN_VALUE ';
    DBMS_OUTPUT.PUT_LINE('Query String is '||QUERY_STRING);
    EXECUTE IMMEDIATE QUERY_STRING;
    END;
    Can I use Table function inside dynamic query.
    Thanking in advance
    Sanjeev

    Try:
    DECLARE
    TYPE CRITERIA_LIST_TABLE AS TABLE OF VARCHAR2(20);
    OtherNoList CRITERIA_LIST_TABLE; /* CRITERIA_LIST_TABLE is index by table*/
    QUERY_STRING VARCHAR2(4000);
    BEGIN
    OtherNoList := CRITERIA_LIST_TABLE();
    SELECT DISTINCT REGEXP_SUBSTR('1,5,6,4', '[^\,]+',1, LEVEL ) BULK COLLECT INTO OtherNoList
    FROM DUAL
    CONNECT BY LEVEL <= REGEXP_COUNT('1,5,6,4', '\,') + 1 ;
    QUERY_STRING := 'INSERT INTO TAB1 (C1,C2) '||
    'SELECT C1,'||
    'C2 '||
    'FROM TAB1 ,'||
    'TABLE( '||
    'CAST (:OtherNoList AS CRITERIA_LIST_TABLE) '||
    ') OTHRNOS '||
    'WHERE TAB1.C1 = OTHRNOS.COLUMN_VALUE ';
    DBMS_OUTPUT.PUT_LINE('Query String is '||QUERY_STRING);
    EXECUTE IMMEDIATE QUERY_STRING using OtherNoList;
    END;p.s. not tested
    Amiel Davis

  • Can i use create function for MSSql scalar and table valude function.

    Hi,
    1) Can i use create function for MSSql scalar and table valued function?
    2) How many type of user defined function are there in oracle 11g express?
    3) And can i reture any "type" form user defined function?
    yourse sincerely

    944768 wrote:
    Q1)That means even if i return predefined types like integer, varchar2 then also PGA is used ?The data type does not determine where the variable is stored. A string (called a varchar2 in Oracle) can be stored in stack space, heap space, on disk, in a memory mapped file, in a shared memory, in an atom table, etc.
    It is the who and what is defining and using that string, that determines where and how it is stored.
    The Oracle sever supports 2 languages in PL/SQL. The PL (Programming Logic) language is a procedural/declarative language. It is NOT SQL. SQL is integrated with it. The PL/SQL engine uses private process memory (PGA). So PL/SQL variables exist in the PGA (but there are exceptions such as LOBs).
    Q2) So please suggest me solution in oracle.Sounds to me you are looking at how to implement a T-SQL style function as an Oracle function, and once implemented, do joins on the function.
    Do not use PL/SQL in SQL in place of a SQL select. It is not T-SQL.
    One cannot use PL/SQL to create functions along the style of T-SQL, where the function executes a SQL using some conditional logic, and then return as if the function was a native SQL select.
    T-SQL is an extension to the SQL language - making it a hybrid and very impure language implementation. PL is based on ADA - part of the Pascal family of languages. The E-SQL (embedded SQL) approach used in languages like C/C++, Cobol and Ada, has been transparently done in PL/SQL. You can write and mix PL code and variables with SQL code. And the PL/SQL engine figures out how to make the call from the PL/SQL engine to the SQL engine.
    But PL/SQL is not "part" of the SQL language and does not "extend" the SQL language in a T-SQL fashion.
    So you need to check your SQL-Server preconcepts in at the door, as they are not only irrelevant in Oracle, they are WRONG in Oracle.
    The correct way in Oracle, in a nutshell - Use the SQL language to do data processing. Use PL/SQL to manage conditional process flow and the handling of errors.

  • I can't use the function of "print to video".

    I've recently purchased FCPX and Blackmagic Design Decklink HD Extreme 3(version 7.5.2) but I already know this combination looks quite weird because I'm using only DSR. This is the first time I have installed FCP.
    I installed FCPX and figured out there's no way to get the video from Decklink on FCPX so that I deleted FCPX, installed FCP 2009 instead and installed FCPX again on the same disk as Final Cut Pro 7... It's a shame to get rid of it.
    At first, I could get a good result when printing to tape. There's no problem. But it's not long before I failed to get what i wanted. VCR detects input signal from FCP 7 through Decklink but the monitor of VCR shows only noise. For now, I can't use the function of "print to video".
    Also, I connect the input of Decklink to the output of DSR and the output of Decklink to the input of DSR at the same time and monitor w/ the output of DSR. However, the output on the monitor shows something weird when I capture the video from DSR as if the signal is fed back.
    Someone told me that I have to use other version of decklink but i'm not sure it would be better if I just change the version.
    What's wrong?
    What should I do for fixing these all mess?

    I've recently purchased FCPX and Blackmagic Design Decklink HD Extreme 3(version 7.5.2) but I already know this combination looks quite weird because I'm using only DSR. This is the first time I have installed FCP.
    I installed FCPX and figured out there's no way to get the video from Decklink on FCPX so that I deleted FCPX, installed FCP 2009 instead and installed FCPX again on the same disk as Final Cut Pro 7... It's a shame to get rid of it.
    At first, I could get a good result when printing to tape. There's no problem. But it's not long before I failed to get what i wanted. VCR detects input signal from FCP 7 through Decklink but the monitor of VCR shows only noise. For now, I can't use the function of "print to video".
    Also, I connect the input of Decklink to the output of DSR and the output of Decklink to the input of DSR at the same time and monitor w/ the output of DSR. However, the output on the monitor shows something weird when I capture the video from DSR as if the signal is fed back.
    Someone told me that I have to use other version of decklink but i'm not sure it would be better if I just change the version.
    What's wrong?
    What should I do for fixing these all mess?

Maybe you are looking for