Changes not allowed in material type

hi all
i have 1 material & for this material is trading good but due to mistake i have created this material with material type FERT.but if i am going to change material type HAWA instead of this material type FERT system not allowed.showing error Purchse order is in process.how can i delete purchase order if already GR & GI happen for some material.what is sort closed.if i do sort closeed can i change material type.please suggest me.
regards
ajit

Dear,
To dlete PO which is in process for GR and GI has happened.....
Go to Tcode MIGO........Select Cancellation option....and enter the GR and GI document and save it..It will cancell the document...
Now go to ME22N and select the line item for that material ...and click on delete button and save,
Now try to change Material type in Tcode MMAM..
Regards
Utsav

Similar Messages

Requisition doc. type RV not allowed with doc. type

Using the tcode ME51n, I created an Outline agreement(Doc type RV) and when i go to ME31K to create a contract and select With Ref to Purchase requisition and enter the Purchase requisition #, I get the error message Requisition doc. type RV not allowed with doc. type.
I tried changing the settings for doc types for contract, but it doesnt seem to be working. Any solutions will greatly beappreciated.

This is the settings in PR: SPRO-MM-Purchasing-PR-Define document type
Doc type: RV     Outl. agmt. requisn.     10     01     02     RVB     R
once above is correct than
select the doc type RV and click on the allowed item category
where can see as below
Item cat Text item category
     Standard
K     Consignment
D     Service
select the doc type RV and click on the Link purchase requisitio in left side
MK     Quantity contract     M     Material unknown          Standard
WK     Value contract          Standard                          Standard
WK     Value contract     K     Consignment          Standard
WK     Value contract     M     Material unknown          Standard
WK     Value contract     W     Material group          Standard
Now go to contract doe type
you will see
MK     Quantity contract     10     02     AZ          SAP     MKK
WK     Value contract     10     02     AZ          SAP     WKK
select any doc type and click on allowed item category
here you would see
     Standard
K     Consignment
L     Subcontracting
M     Material unknown
D     Service
than click on link purchase requisition by selecting doc type MK or WK
RV     Outl. agmt. requisn.          Standard          Standard
RV     Outl. agmt. requisn.          Standard     K     Consignment
RV     Outl. agmt. requisn.          Standard     M     Material unknown
RV     Outl. agmt. requisn.     K     Consignment     K     Consignment
RV     Outl. agmt. requisn.     D     Service     D     Service
once you have all this set up than you can create the contract based on the RV reqs

Storage class not allowed in storage type

Hi All,
I am getting this error while confirming the TO.
It stays Storage class is not allowed in Storage type but how can this be configured in OMM2.
or do we need to define any sequence in OMLY.

Hi
Have u defined your material as Hazardous material? is so, yes, u have to do settings in OMLY.
"Storage class: Classifies hazardous materials with regard to their storage conditions. A check can be carried out to find out whether hazardous materials that belong to a specific storage class may be placed into a particular storage type".
Rgds
Ramesh

When i try to download an update the dropdown automatically inserts my apple id which is wrong. It's in gray and will not allow me to type in a correct id. How do I stop / delete the automatic insertion of the id?

When i try to download an update from the appstore the dropdown menju automatically inserts my apple id (which is wrong). It's in gray and will not allow me to type in the correct id. How do i stop the auto insert so that i can enter the correct id?

the original apple id was entered incorrectly. Apple says it must be a email address. My email address is correct but the letter ( t ) somehow got added to the (.com) so that when i try to enter my id it is automaticly loaded with the email address the ends ( .comt ) . According to Apple this is not a "legal" email id. But it appears on my dropdown in gray and i cannot alter it or delete it, thus preventing me from downloading software updates.

Set type COMM_PR_UNIT is not allowed for product type

Hello all, I am working in SRM 7.0 and when I try to replicate service master (DNL_CUST_SRVMAS) I have this error:
Set type COMM_PR_UNIT is not allowed for product type
What can I do? I think that is an ABAP problem
Thanks in advance
Rosa Rodríguez

Rosa,
This note is something different and nothing to do with the issue. Can you share how did you resolve the DNL_CUST_SRVMAS issue? We are also getting same error.
Thanks,
Jagadish

Value 'defaultNs:AddBP2Type' is not allowed for attribute 'type'

Hi All,
I created the wsdl for mobile and I tried to send a SOAP request from Altova XMLSpy. However when I geive the wsdl in 'wsdl file location' I receive the following.
File http://127.0.0.1:8080/B1iXcellerator/exec/dummy/com.sap.b1i.vplatform.scenarios.setup/vPac.sap.B1Mobile/001sap0003_sap.B1Mobile.wsdl is not valid.
Invalid XML schema: 'Value 'defaultNs:AddBP2Type' is not allowed for attribute 'type'.'
Error location: wsdl:definitions / wsdl:types / xs:schema / xs:element / @type
Any Idea?
Vangelis

Hi,
it seems that Altove did not cope with defaultNs prefix that is used for marking default namespace.
just look up in your <xs:schema > tag what namespace prefix is used for your namespace - you shall find there something like this
<xs:schema xmlns:ns0="your.namespace.com" xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified"
and replace prefix defaultNs with prefix of your namespace (in example above it would be ns0)
There might be several usages of defalutNs iside of WSDL (at least in my case were two) so replace it everywhere using same approach
Best regards, Artem

Transaction CLM1 not allowed for notification type QL

Hello guys,
one of our user try to open the transaction CLM1/CLM2/CLM3 he getting error message Transaction CLM1 not allowed for notification type QL
please any one give solution for this issue.
find the error screen shot for your reference.
Thanks
Surya

Hello Surya,
Have you done Basic configuration for Claims processing in SAP Project System.
SPRO > Project System > Claim > Notification - Claim > Notification creation
Also check config for Settings for Claims.
Refer sap help for more details
SAP Library - Claim Management
Regards
Tushar

Transaction QM03 not allowed for notification type MQ

HI Dears,
The following error is appearing when i want to view my notification created through defects
Transaction QM03 not allowed for notification type MQ
How to rectify it ?
Alagesan

Hi,
Check IQS3 transaction also....
Cheers,
Tushar

My keyboard occasionally goes crazy, not allowing me to type. Also, cursor goes crazy and opens pages and windows at will. Help!

My typing cursor frequently goes crazy, not allowing me to type and jumping from place to place, deleting letters. Suddenly, a line I have typed will be highlighted and deleted at will. Also, mouse cursor moves at will, opening multiple pages in seconds. Help! What could be causing this, and how can I stop it?
I've had my Macbook pro for over a year and it has never done this before. Restarting the computer fixes the problem temporarily.

My first thought was the hard drive and OS has a built in Sudden Motion Sensor whcih will stop the hard drive heads from crashing into the platters when the computer is moved suddenly. This does work most of the time and could cause some of the tings you are seeing.
But then after reading more of your first post it seems your system and drive is doing some very strange things.
It would be best to first take it into an Apple Genius Bar and have it looked at. They can run tests on it and since it is still in the original 1 year warranty this should not cost you anything even if something needs to be replaced.
You can also run the Apple Hardware Test on it your self by connecting it to the Net by Ethernet cable and booting holding down the d key or the Command+d keys. That will boot the computer from the Apple internet servers and load the AHT.
Good Luck.

HT204266 if i purchase an app today can i download it on my ipad next week when i buy the ipad.....also i noticed on another purchase attempt the site would not allow me to type in my 3 digit security code? what next??

if i purchase an app today can i download it on my ipad next week when i buy the ipad.....also i noticed on another purchase attempt the site would not allow me to type in my 3 digit security code? what next??

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

When using more than one tab, once I have opened a pdf using firefox my laptop will not allow me to type or click in another tab unless I drag the pdf into it's own window?

when using more than one tab, once I have opened a .pdf using firefox my laptop will not allow me to type or click in another tab unless I drag the .pdf into it's own window? not a major problem just irritating.

I found the cause but no solution, it's actually a plugin that does that: divx plus weblpayer (it gets installed when you install DivX on your system), if you disable it and restart firefox it all works again. But I want that plugin... so DivX need to fix this, unless it is a Firefox bug in its own core... anyway these two together creates the problem.
(I'm running Firefox 9.x on OSX Lion)
I also wish firefox tab tear out tab worked more like chrome's tab tear out, much friendlier...

My MacBOOK Pro will not allow me to type in the password to open? up the computer, it just making a donging noise

My MacbookPro will not allow me to type in the password to open the computer, the keys make a donging noise when I try to use them ?

If the normal restart doesn't work, and you restart on the recovery hard drive, from the choices of things to do window that appears, select Terminal, and in the Terminal window type: resetpassword and then press enter. You will have a window with the users to choose from to reset the password. Select the one you want and you will be able to reset the password, double entry of course.

Status profile not allowed for object type

hi
i had created a status profile (for having 2 statuses before production order release) and assigned in the order type.
but while creating the production order i receive the following error.
Message no - CO622
status profile not allowed for object type
please provide your inputs
regards
Ramesh

Ramesh,
once you cerate a Status profile in BS02 and add status to the same. in the tollbar you will see OBJECT TYPE push button, select teh obejcts like PP/PM order header / operation /comepeoent and PRT ect where that staus can be applied.
Then assign the statsu profile to order type.

Costing is not allowed for material/PPS status - Message no. CK 399

Hi Experts,
I am getting the following error when doing a costing run via CK11N:
Costing is not allowed for material/PPS status
Message no. CK 399
Diagnosis
Material XXXXXX in plant XXXX has material status Y1. The setting for this status is such that costing cannot be carried out.
Procedure
Check the material status in the costing view and MRP 1 view in the master data record of material XXXXXX in plant XXXX (Field MAT/PPS status)
I have already checked the status of the material in both costing and MRP 1 view via MM03. Plant-Specific Material Status is Y2 (Material productive). I am not sure if the statuses are standard but I hope anyone can advice on the solution if you have encountered this one already.
Thanks,
Josef

Hi Josef,
Please go to OMS4 and check the material plant specific status for Y1 and Y2 for Mat. Cost Estimate Procedure.
Also check components of BOM for plant specific status it should be Y2 for all you components.
One of the materials to be costed has a material/PPS status which does not allow a cost estimate.
CS03 you can check the BOM components and CS12 for multiple BOM explosion.
Regards,
R.Brahmankar

What do I do if my key board will let me type my password yet will not allow me to type anywhere else. I've tried to hook up my wireless one as well as my one with a cord they are both doing the same thing.

What can I do if my key board will let me type my password yet will not allow me to type anywhere else.? I've tried both my wireless and my one with a cord.

Hi Jenny, it's not quite clear what you're seeing.
Is this at login, then it goes to loading the desktop & such, & then is unresponsive, or what exactly?

Changes not allowed in material type

Similar Messages

Maybe you are looking for