Characteristics for class type 001 and class 59111 - Message Re-phrased

Hi All,
Let me put in better words.
The requirement is to get the list of Characteristics that are associated with a particular Class type and Class that would be entered by the user in selection screen. I have used KLAH and KSML to establish the link and got the relevant characteristics list configured. It worked for me for most of the Class type and Class combination.
The issue is on particular class type 001 and class 59111, if I put a lookup in KSML, I don't get any records. But if we look in the configuration CL02 for the same Class type 001 and class 59111, I see a list of characteristics configured there.
Does anyone know how to fetch the characteristics on this particular case?
Thanks
Rajesh.
Edited by: Rajesh Kumar K on Jan 12, 2012 12:12 PM

Hi Sylendra,
Thanks for looking into it and replying with your thoughts.
What you have mentioned about the approach on getting the characteristcs from KLAH and KSML is exactly how I have written in my program. Ofcourse your second statement of going into AUSP to get the values for characteristics for an Object (eg: material number XXXX) is also correct.
But my issue is still on getting the relevant characteristics for the class tyoe 001 and class 59111. I need to display to user the relevant characteristics  that are configured for Class type 001 and class 59111. But when I go into KSML passing the internal class number and class type, I don't get any records. If you see, I am not searching characteristic values for an object, I am searching for characteristics itself.
The question would be, why records are not maintained in KSML for class 59111 (though they show in CL03) . or there are any other tables to read characteristics...
Thanks
Rajesh.

Similar Messages

  • Period 001/2010 is not open for account type S and G/L 799999

    Hi friends
    I am in SD. I am trying to create stock for newly created material, movement type 561. system give error Period 001/2010 is not open for account type S and G/L 799999.
    I use the T. Code OB52, i am confuse which combination i.e. variant, A, from Account, To Account, from per. 1 Year, To period, Year, from per. 2 year, To Period, Year, I should choose, can some one send me detail reply and solution which may display after this t. code OB52. I also have questin which movement type i should use.
    Using T.Code MMPV, i have created new period (from company code 1000, To Company code 1000, period 01, Fiscal Year 1020.
    I was reading previous solution, one of them was i should close period 2009. I tried to do this using using MMPV, i entered fiscal year 2009. Error display  The specified year 2009 is not the current calender year.
    Thanks
    Raj

    Hi
    Hope you are doing this in test server
    If this is a real time issue this needs to be addressed by a FI consultant
    First see for your company code what is the posting period varient maintained in OBY6
    Say if it is 1000
    Then in OB52
    Maintain a setting like this
    1000-S-BLANK-ZZZZZZZZZZ-1--2010122010-13--201016--2010
    Then save it
    This is for Account type S that is GL accounts
    Preferably maintain the same for      A,   + ,   D,   K,   M,   V
    Regards
    Raja

  • Different Consumption Account for Movement type 201 and 261

    Dear All ;
    Client want use different consumption account for movement type 201 and 261  .
    How we canmap this in SAP
    Kindly suggest .
    Regards;
    Joydeep Mukherjee

    This you can acheive by setting account assignment indicator is checked.
    OMJJ >>> Movement Type >>>Account Grouping >>Check account Assignment
    If this indicator is set, the system checks whether a G/L account or an account assignment has been specified on the item screen when user post transactional data. If so, the system copies this data to the posting line for account determination.
    If this indicator is not set, the system always uses the G/L accounts or account assignments determined automatically.

  • Re: Changing Inspection lot origin from 08 to 05 for movement type 322 and 349

    Reference discussion:  Changing Inspection lot origin from 08 to 05 for movement type 322 and 349
    With reference to the above discussion and your explanation for user EXIT QAAAT0001, it was stated that:
    If you only have two inspection types, you can mark one as preferred.  Then with exit use logic that if MM = 311 use preferred inspection type, if 911 use, non-preferred inspection type.
    May I ask what are you refer to for MM? It seems like movement type to me, however, I can't find movement type field in the structure within the component of EXIT_SAPLQAAT_002.  Appreciate if you could shed some light on this.
    Best Regards,
    CY
    Branched from older discussion by moderator.  When there are questions concerning an older discussion, please create a new discussion with reference to the older one.  Thanks! 

    Yes.. you are correct.  But with the info that is provided by EXIT_SAPLQAAT_002, you should be able to identify the proper material document in table MSEG which will have the material movement. 
    You can use the values of plant, batch, material number, Purchase order number, Order number, item number, storage location as well as the current date since the exit would normally be executed on the same date the material movement was done.  You'd also probably only execute the logic if QKZ is "X".
    Craig

  • [svn:bz-trunk] 21111: Bug: BLZ-578 - [Coverity] potential race condition for class flex.messaging.MessageBroker

    Revision: 21111
    Revision: 21111
    Author:   [email protected]
    Date:     2011-04-21 06:12:37 -0700 (Thu, 21 Apr 2011)
    Log Message:
    Bug: BLZ-578 - potential race condition for class flex.messaging.MessageBroker
    QA: Yes
    Doc: No
    Details: The bug was fixed by change 19598 already, but also adding a minor fix to not call setSystemSettings in initThreadLocal method becuase there are no thread local variables in MessageBroker anymore.
    Ticket Links:
        http://bugs.adobe.com/jira/browse/BLZ-578
    Modified Paths:
        blazeds/trunk/modules/core/src/flex/messaging/MessageBroker.java

  • No element type defined for object type BSEG and system / Disp Management

    Hi all,
    I get the error message
    No element type defined for object type BSEG and system ...
    Message no. UDM_MSG006
    when I try to save a dispute case.
    What do I have overlooked in config?
    Thanks
    Hein
    Points guaranteed as always.

    Hi Sai,
    I have configured the standard settings in there.
    When I add 2 customer-disputed objects from 2 different customers I get that error.
    Any solution to this?
    Thank you!

  • The swf tag spec for tag type 41 and 63?

    Hi.
    Where can I find the swf tag spec for tag type 41, 63?
    I made the tag type list by reading the SWF file format
    specification
    http://www.adobe.com/devnet/swf/pdf/swf_file_format_spec_v9.pdf
    tag type:
    0: End
    1: ShowFrame
    2: DefineShape
    4: PlaceObject
    5: RemoveObject
    6: DefineBits
    7: DefineButton
    8: JPEGTables
    9: SetBackgroundColor
    10: DefineFont
    11: DefineText
    12: DoAction
    13: DefineFontInfo
    14: DefineSound
    15: StartSound
    17: DefineButtonSound
    18: SoundStreamHead
    19: SoundStreamBlock
    20: DefineBitsLossless
    21: DefineBitsJPEG2
    22: DefineShape2
    23: DefineButtonCxform
    24: Protect
    26: PlaceObject2
    28: RemoveObject2
    32: DefineShape3
    33: DefineText2
    34: DefineButton2
    35: DefineBitsJPEG3
    36: DefineBitsLossless2
    37: DefineEditText
    39: DefineSprite
    43: FrameLabel
    45: SoundStreamHead2
    46: DefineMorphShape
    48: DefineFont2
    56: ExportAssets
    57: ImportAssets
    58: EnableDebugger
    59: DoInitAction
    60: DefineVideoStream
    61: VideoFrame
    62: DefineFontInfo2
    64: EnableDebugger2
    65: ScriptLimits
    66: SetTabIndex
    69: FileAttributes
    70: PlaceObject3
    71: ImportAssets2
    73: DefineFontAlignZones
    74: CSMTextSettings
    75: DefineFont3
    76: SymbolClass
    77: Metadata
    78: DefineScaleGrid
    82: DoABC
    83: DefineShape4
    84: DefineMorphShape2
    86: DefineSceneAndFrameLabelData
    87: DefineBinaryData
    88: DefineFontName
    89: StartSound2
    And I found there are some unexplained tag types.
    Escpecially, I need the spec for tag type 41 and 63
    because those tag types exists in air files of my application
    which I built with the Flex Builder 3.
    Thanks in advance.

    I've found this: http://opensource.adobe.com/svn/opensource/flex/sdk/trunk/modules/swfutils/src/java/flash/ swf/TagValues.java

  • [svn:bz-trunk] 19214: BLZ-578 - [Coverity] potential race condition for class flex.messaging.MessageBroker

    Revision: 19214
    Revision: 19214
    Author:   [email protected]
    Date:     2010-12-09 07:31:35 -0800 (Thu, 09 Dec 2010)
    Log Message:
    BLZ-578 - potential race condition for class flex.messaging.MessageBroker
    QA: Yes
    Doc: No
    Checkintests: Pass
    Details: MessageBroker had a thread-local SystemSettings property in addition to regular SystemSettings property. This was due to MessageBroker#getSystemSettings static method that was called only once in the whole code tree. Once I removed the need for this static method, I could get rid of the thread-local SystemSettings property.
    Ticket Links:
        http://bugs.adobe.com/jira/browse/BLZ-578
    Modified Paths:
        blazeds/trunk/modules/core/src/flex/messaging/FlexContext.java
        blazeds/trunk/modules/core/src/flex/messaging/MessageBroker.java
        blazeds/trunk/modules/core/src/flex/messaging/MessageBrokerServlet.java
        blazeds/trunk/modules/core/src/flex/messaging/MessageException.java

  • IPhone 4s.used to get swoosh sound every time I got an email.  Now I don't and I have to open email for it to connect and get new messages.  What do I do?

    iPhone 4s.used to get swoosh sound every time I got an email.  Now I don't and I have to open email for it to connect and get new messages.  What do I do?

    Once you purchase or download an app it will always be associated with the Apple ID used to download it. When that app requires and update you must use the Apple ID and password used to download it in the first place. The only way around this is to delete the apps the require the old Apple ID and download or purchase them again with the new Apple ID.

  • Change documents of material master classification class type 001 and 300

    Dear guru ,
    I want to see the history of change documents of material master classification using MM02.
    The system allow to see the history only for class type 023.
    For class type 001 or 300 the change document isnu2019t available.
    I must do some settings or the function for these class type arenu2019t available ?
    Thanks.

    Dear ,
    changes in values for a characteristic can be monitored in CL20N but as for MM02/MM03 transaction only for class type 023.
    For class type 001 or 300 the change document isnu2019t available.
    Thanks.

  • BAPI error for mvmt types 201 and 202

    Hi all,
      I'm using a bapi BAPI_GOODSMVT_CREATE for the movement type 201 and 202 with the gm_code = '03' for the transaction mb11- Goods movement. But it returns an error u201D Account 400000 requires an assignment to a CO object u201D...I'm unable to resolve this one....I have attached the code below. Please help me in fixing this issue...
    if sy-subrc = 0.
      loop at it_mchb into wa_mchb.
        if wa_mchb-clabs gt 0.
          clear wa_header.
          wa_header-pstng_date = sy-datum.          " fill header data
          wa_header-doc_date   = sy-datum.
          wa_code-gm_code      = '03'.              "fill code data
          clear wa_item.
          wa_item-material     = wa_mchb-matnr.     " fillitem data
          wa_item-plant        = wa_mchb-werks.
          wa_item-stge_loc     = wa_mchb-lgort.
          wa_item-batch        = wa_mchb-charg.
          wa_item-entry_qnt    = wa_mchb-clabs.
          wa_item-move_type    = '201'.
                       wa_item-entry_uom    = wa_mchb-meins.
          append wa_item to it_item.
        elseif wa_mchb-clabs lt 0.
          clear wa_header.
          wa_header-pstng_date = sy-datum.          " fill header data
          wa_header-doc_date   = sy-datum.
          wa_code-gm_code      = '03'.              "fill code data
          clear wa_item.
          wa_item-material     = wa_mchb-matnr.     " fillitem data
          wa_item-plant        = wa_mchb-werks.
          wa_item-stge_loc     = wa_mchb-lgort.
          wa_item-batch        = wa_mchb-charg.
          wa_item-entry_qnt    = wa_mchb-clabs.
          wa_item-move_type    = '202'.
                       wa_item-entry_uom    = wa_mchb-meins.
          append wa_item to it_item.
        endif.
      endloop.
      clear lv_lin.
      describe table it_item lines lv_lin.
      if lv_lin = 0.
        write : / 'No records found'.
      endif.
      call function 'BAPI_GOODSMVT_CREATE'
        exporting
          goodsmvt_header  = wa_header
          goodsmvt_code    = wa_code
        importing
          materialdocument = lv_matdoc
        tables
          goodsmvt_item    = it_item
          return           = it_return.
      if it_return is initial.        " if record created successfully
        call function 'BAPI_TRANSACTION_COMMIT'. " commit work
        write : / lv_matdoc, 'IS CREATED SUCCESSFULLY' color 5.
        loop at it_item into wa_item.
          write : / 'Mat :', wa_item-material,'bat :', wa_item-batch.
        endloop.
      else.                           " if record is not created successfylly
        loop at it_return into wa_return.
          write : / wa_return-message color 6.
        endloop.
        uline.
      endif.
    else.
      write : / 'No Records found' color 7.
    endif. " gt_s035 is not initial
    Edited by: Arunmozhi_06 on May 30, 2011 12:48 PM

    Hi,
       Did you passing the leading 0's in the cost center field?
    and check the below coding..
    * Structures for BAPI
      data: gm_header  type bapi2017_gm_head_01.
      data: gm_code    type bapi2017_gm_code.
      data: gm_headret type bapi2017_gm_head_ret.
      data: gm_item    type table of
                       bapi2017_gm_item_create with header line.
      data: gm_return  type bapiret2 occurs 0.
      data: gm_retmtd  type bapi2017_gm_head_ret-mat_doc.
      clear: gm_return, gm_retmtd. refresh gm_return.
      perform show_status using 'Scrapping(551) Material'.
    * Setup BAPI header data.
      gm_header-pstng_date = sy-datum.
      gm_header-doc_date   = sy-datum.
      gm_code-gm_code      = '06'.                              " MB11
    * Write 551 movement to table
      clear gm_item.
      move '551'        to gm_item-move_type     .
      move xresb-matnr  to gm_item-material.
      move p_bdmng      to gm_item-entry_qnt.
      move xresb-meins  to gm_item-entry_uom.
      move xresb-werks  to gm_item-plant.
      move xresb-lgort  to gm_item-stge_loc.
      move p_grund      to gm_item-move_reas.
    * Determine cost center per plant
      case xresb-werks.
        when '0004'.
          move '0000041430' to gm_item-costcenter."pass leading zero's in the cost center field
        when '0006'.
          move '0000041630' to gm_item-costcenter.
        when '0007'.
          move '0000041731' to gm_item-costcenter.
        when '0008'.
          move '0000041830' to gm_item-costcenter.
      endcase.
      append gm_item.
    * Call goods movement BAPI
      call function 'BAPI_GOODSMVT_CREATE'
           EXPORTING
                goodsmvt_header  = gm_header
                goodsmvt_code    = gm_code
           IMPORTING
                goodsmvt_headret = gm_headret
                materialdocument = gm_retmtd
           TABLES
                goodsmvt_item    = gm_item
                return           = gm_return.
    Maybe there is some config missing for your cost center, or maybe something missing in your code. check above.
    Regards,
    Dhina,..
    Edited by: Dhina DMD on May 31, 2011 8:02 AM

  • Account assignment for Movt type 101 and 501

    All SAP Gurus,
    We want to do the account assignment for movt types 101, 102, 122, 123, 201, 202, 261, 262 accourding to the movement types.
    We are aware that the Transaction Key is 'GBB'.
    But how to know that which 'General Modification' is used for which movement types.
    (in short where we can find this link between movement types and Transaction Key and 'General Modification')
    Regards,

    To know this first you have to know what does the different general modifications means for GBB:
    AUA: for order settlement
    AUF: for goods receipts for orders (without account assignment)
    and for order settlement if AUA is not maintained
    AUI: Subsequent adjustment of actual price from cost center directly
    to material (with account assignment)
    BSA: for initial entry of stock balances
    INV: for expenditure/income from inventory differences
    VAX: for goods issues for sales orders without
    account assignment object (the account is not a cost element)
    VAY: for goods issues for sales orders with
    account assignment object (account is a cost element)
    VBO: for consumption from stock of material provided to vendor
    VBR: for internal goods issues (for example, for cost center)
    VKA: for sales order account assignment
    (for example, for individual purchase order)
    VKP: for project account assignment (for example, for individual PO)
    VNG: for scrapping/destruction
    VQP: for sample withdrawals without account assignment
    VQY: for sample withdrawals with account assignment
    ZOB: for goods receipts without purchase orders (mvt type 501)
    ZOF: for goods receipts without production orders
    (mvt types 521 and 531)
    You can also define your own account groupings. If you intend to post goods issues for cost centers (mvt type 201) and goods issues for orders (mvt type 261) to separate consumption accounts, you can assign the account grouping ZZZ to movement type 201 and account grouping YYY to movement type 261
    Then go and check OMWN.
    Regards,
    Indranil

  • Process code or Fmodule  for Idoc type PREQCR101 and message type PREQCR1

    hi all,
           Iam unable to find the process code or function module for the idoc type PREQCR101 and message type PREQCR1 for inbound process.
    help from some one would be a lot appretiated.

    Hi,
    Go to transaction WE57 and you can find the processing FM and message type that are associcated to the IDOC type.
    For process code if it is Inbound check WE42 and outbound check WE41 transactions
    Regards
    Shiva

  • GR/GI Slip No Mandatory for Movement Type 101 and 102

    How to make 'GR/GI Slip No' mandatory in transaction 'MIGO' for only movement type 101 and 102.
    Regards,
    Piyush

    Which user exit?
    MB_CF001  Customer Function Exit in the Case of Updating a Mat. Doc.
    MBCF0002  Customer function exit: Segment text in material doc. item
    MBCF0005  Material document item for goods receipt/issue slip       
    MBCF0006  Customer function for WBS element                         
    MBCF0007  Customer function exit: Updating a reservation            
    MBCF0009  Filling the storage location field                        
    MBCF0010  Customer exit: Create reservation BAPI_RESERVATION_CREATE1
    MBCF0011  Read from RESB and RKPF for print list in  MB26           
    Please suggest.

  • Extension definition for class discussionsTNG.Message (FCI_DISCTNG_MESSAGE)

    Hi Experts,
    I have a requirement to insert a new custom field creating a message for a discussion in a Master Agreement document.
    I have tried to create an Extension Definition but the required field Extended Class Name is not available the class for the message.
    Do yo know if is possible configure with the Extension Reference Types the required extended class name to create the extension definition?
    Thanks in advance!
    Best Regards,
    Fran.

    Hello Vikram,
    Thanks for your reply!
    One additional question... Is supported the extension for standard collection tables?
    For example, it is possible to add a new custom field in the standard collaborator collection table for master agreement document?
    Best Regads,

Maybe you are looking for