Connect to oracle database with Oracle.DataAccess.Lite_wce.dll

With Oracle.DataAccess.Lite_wce.dll i want to ceonnect to oracle database.
I try like:
OracleConnection conn = new OracleConnection("Data Source=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=xxx)(PORT=1521)))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=baza1)));User Id=xx;Password=xx;");
conn.Open();
but it said "S1000[POL-3023] the database does not exist".
What i am doing wrong?

what client are you using if you are using windows mobile then
use
Oracle.DataAccess.Lite.dll on the handheld
connection string is "dsn=databasename;uid=SYSTEM;pwd=userpassword"
the username is always system, the passw0rd the the user password of the specific user that the handheld is created for, the database name depends you can see it in the device->orace->odbc.txt file
if your re on c# then you should write
using Oracle.DataAccess.Lite;
LiteConnection OraCon;
OraCon = new LiteConnection(connectionstring);
OraCon.Open();

Similar Messages

Connecting MS-Access database with Oracle Forms

Hai,
Can any one suggest as to how I can connect MS-Access database
with Oracle Developer Forms. What is the procedure ? Suggest me
if I need to install any drivers. Waiting for an early reply.
Warm Regards,
Raghav.
email:[email protected]

Not possible as far as I know.
Probably because ODBC itself (the defined interface) doesn't support it.
There is a commercial MS Access (java only) driver that might support it.

To connect oracle database with ms access database

i want to connect oracle database with ms access database
i have follow the following steps
1. create ms access database.
2. create system dsn.
3. make change in listener.ora.
4. make change in hs folder.
5.change the tnsname.ora.
6. lsnrctl stop and lsnrct start.
7. create database link in oracle sql*plus.
8.select the table of ms access
but i have return the foloowing error.
ORA-12154: TNS:could not resolve the connect identifier specified
using window 2000, oracle 10g

Have a look on ths thread, may it helps ...
Re: copy access data into oracle with form builder 9i

CONNECTING ORACLE 9I OR 10G DATABASE WITH ORACLE 10G FORMS AND REPORTS

pls tell how to connect oracle 9i or 10g database with oracle developer suite 10g . though the forms are getting connected but not running with error as
FRM-10142 the HTTP listner is not running on pls start the listner or check your runtime preferences.
now pls tell how to start listner and how to chage runtime preferences.
though i have worked with oracle 9i and forms 6i where we used to copy the tnsnames.ora from network/admin of oracle to forms 6i tnsnames.ora.
thank you, you may be thinking such a long question.....

sir
By server i mean the computer where oc4j and backend database are running is one one of the client pc not a dedicated server..., these database and 10g dev suite are installed in one of the client machine,
all the clients are using same internet explorer as browser.
no message is being displyed on some of the client machine where these forms are not being uploaded on browser instead it displays as done in status bar without actually showing anything at all...
sir so far as jinitiator or JRE is concered i have seen on the client machine (where my forms are running on internet explorer) a pop up is displyed telling one activex control is required to run this program and click to install it..
after clicking it download jinitiator from server and after installing jinitiator my forms are loaded and start functioning...
what i feel is as i said this machine where oc4j and database is running is one of the client machine so some other clients do not have acess to this machine, so this might be the reason why those clints are not able to run the said forms on the internet explorer.... can it be so... kindly tell..
thank you for your patience for reading the question

Connect to oracle database with php script

Hello!
How can I connect to an Oracle database with a PHP script? I read about it at www.php.net:
"Oracle 8 functions; These functions allow you to access Oracle8 and Oracle7 databases. It uses the Oracle8 Call-Interface (OCI8). You will need the Oracle8 client libraries to use this extension."
Where can I get these libraries from?
Who knows more about the issue?
Thanks a lot for your help!
Martin
null

Hello
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by mheibel([email protected]):
Hello!
How can I connect to an Oracle database with a PHP script? I read about it at www.php.net:
"Oracle 8 functions; These functions allow you to access Oracle8 and Oracle7 databases. It uses the Oracle8 Call-Interface (OCI8). You will need the Oracle8 client libraries to use this extension."
Where can I get these libraries from?
Who knows more about the issue?
Thanks a lot for your help!
Martin<HR></BLOCKQUOTE>
Install and put working a sqlnet working client (install the Oracle Client option of the Oracle Database CD ROM). Than compile php with the --oci option. Than try the samples in php.net (oci function in the help).
These are the steps... Put everything working is a little more complicated...
FS
null

How to connect oracle database with JAVA

how to connect oracle database with JAVA....
using j2sdk and Jcreator . which connector to use .. what are the code for that ..

PLEASE .... Ask in an Oracle Java forum.
And read the documentaiton. There is a whole document devoted to doing that. http://download.oracle.com/docs/cd/B19306_01/java.102/b14355/toc.htm has examples.
PLEASE ... do not ask product questions in a forum which clearly has a title saying it is devoted to assisting with download problems.

Unable to connect to my Oracle Database with Microsoft's ODBC for Oracle driver

I am unable to connect to my Oracle Database with Microsoft's ODBC for Oracle driver vers.2.573.4202.00 on a Win98 computer.
First, I create a "Net Service Name" in order for the ODBC Driver to find the Oracle server. I then created a System DSN in the ODBC Data Source Administrator and assigned the "Net Server Name" as the server in the "Microsoft ODBC for Oracle Setup". But when I test this DSN with Oracle's provided "Oracle ODBC 32Bit Test vers.2.5.3.1.0" I get an error:
SQLSTATE: NA000
Native Error Code:0
Driver Message:[Microsoft][ODBC driver for Oracle][Oracle]
This error occurred on all three Win98 computers I have tried. It does however, seem to work fine on WinNT 4.0, and believe it or not, on the two Win95 computers I have tried.
Does anyone have any fixes, recomendations, or advice?
Thank you,
Eric Edwards
null

Why are yu not using the Oracle ODBC driver - these can be downloaded from OTN.
Have you set up a tnsnames.ora entry for the Oracle database you want to connect to? Does this name have a domain name added to it? Check %ORACLE_HOME%\network\admin\tnsnames.ora for the service name. If it is a name of the form :
name.domain.subdomain
then you should try using this full name when configuring the ODBC data source.
null

Connect ORACLE database with sysdba privileges

Hi Guru,
I am connecting to my ORACLE database with my VB application.
I have problem with connecting to the database with SYSDBA privileges. i.e it is not connecting to the database with SYSDBA privileges.
If I connect my db from SQLPLUS. Its worked like this..
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL> select Name from v$datafile;
select Name from v$datafile
ERROR at line 1:
ORA-00942: table or view does not exist
SQL> connect as sysdba;
Enter user-name: user_1
Enter password: ****
Connected.
SQL> select Name from v$datafile;
NAME
C:\NEW\ORADATA\ITPL\SYSTEM01.DBF
C:\NEW\ORADATA\ITPL\UNDOTBS01.DBF
C:\NEW\ORADATA\ITPL\CWMLITE01.DBF
C:\NEW\ORADATA\ITPL\DRSYS01.DBF
C:\NEW\ORADATA\ITPL\EXAMPLE01.DBF
C:\NEW\ORADATA\ITPL\INDX01.DBF
C:\NEW\ORADATA\ITPL\ODM01.DBF
C:\NEW\ORADATA\ITPL\TOOLS01.DBF
C:\NEW\ORADATA\ITPL\USERS01.DBF
C:\NEW\ORADATA\ITPL\XDB01.DBF
10 rows selected.
SQL>
Now in my VB application if I am using following string to connect the database.
m_adoCnn.ConnectionString = Provider=MSDAORA;Password=pass;User ID=user_1;DBA Privilege=SYSDBA;Data Source=ITPL
It will connect properly to the database but gives error while executing the query select Name from v$datafile;
as,
ORA-00942: table or view does not exist
Can any body help me in this or provide me proper connection string.

Hello,
I am getting below error when i kust Clic k on Test Connection in SSMS:
TITLE: Microsoft SQL Server Management Studio
The test connection to the linked server failed.
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
Cannot initialize the data source object of OLE DB provider "OraOLEDB.Oracle" for linked server "test".
OLE DB provider "OraOLEDB.Oracle" for linked server "test" returned message "ORA-12154: TNS:could not resolve the connect identifier specified". (Microsoft SQL Server, Error: 7303)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.4000&EvtSrc=MSSQLServer&EvtID=7303&LinkId=20476
BUTTONS:
OK
Can you please guide is there any other setting i need to do after install Oracle Client ?
Best Regards,
Tushar Malvi

Connect to oracle database with visual studio 2005

Hi, i have a oracle database called orcl (10.2). I am trying to connect with this database with visual studio 2005. I do this:
In Server Explorer, right click in Data Connection and click in add connection.
I choose oracle database and oracle provider.
In server name I write the name of my computer, and i write the user and pass of the data base (sys or system) but it gives me this error: "ora-12514 listener doesnt know the asket for service in the description one of connection" (translated of Spanish)
what i have to write in server name? host, host:port, LISTENER,.... what?
Thanks

Sometimes, you can check names using from the command line:
$> tnsping <orcl>
TNS Ping Utility for 32-bit Windows: Version 8.1.7.0.0 - Production on 10-ENE-20
06 09:01:04
(c) Copyright 1997 Oracle Corporation. All rights reserved.
Attempting to contact (ADDRESS=(PROTOCOL=TCP)(HOST=server1)(PORT=1521))
Realizado correctamente (0 mseg)
$>

Unable to connect to Oracle Database using Oracle Sql developer 2.1.1.64

Hi Everyone,
I am searching for some help regarding my problem with Oracle connectivity. I have installed Oracle 11g release 2 on my Windows XP Professional Laptop. For a few days after installation i could connect to the Oracle database with the SYSTEM account using Oracle SQL developer ( installed on the same Laptop) but now i am unable to do so.It gives me this annoying message:
An error was encountered performing the required operation Got a minus one from read call .Vendor code 0
However i am able to connect using Sql Plus by supplying the username SYSTEM and the corresponding password.
My TNSNAMES .ora file is as follows:
ORACLE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST =localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORACLE)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
My Listener.ora file is as follows:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = D:\app\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:D:\app\product\11.2.0\dbhome_1\bin\oraclr11.dll")
(SID_DESC =
(GLOBAL_DBNAME = Oracle)
(ORACLE_HOME = D:\app\product\11.2.0\dbhome_1)
(SID_NAME = Oracle)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(PROTOCOL_STACK =
(PRESENTATION = GIOP)
(SESSION = RAW)
ADR_BASE_LISTENER = D:\app
My Sqlnet.ora file is as follows:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
I am new to Oracle and so i need someone in this forum who can help me resolve this problem. Also i even tried connecting to the database using Toad 10.5.0.41. It give me the following error:
ORA 12537 : TNS Connection closed
Thanks for your patience and help in advance.
---Prashant

Hello Irian and Sue,
I can connect to the Oracle database using SQL Plus. Now when i TNSPING ORACLE from command line i get the following message :
Used parameter files:
D:\app\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =localhost
*)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ORACLE)))*
TNS-12537: TNS:connection closed
Thanks for your response to my initial post.Do u have any other methods to resolve this?

How to CREATE a DATABASE with ORACLE?

Hello
Can somebody please just tell me, how do i create a Database with Oracle 10g(Express Edition)? I find it very disturbing that not in one of the dozen Orcale books i have, they explain to you on how to create a DATABASE. They begin with how to create Table, can a table exist without a database?
I have tried the command line, but it tells me im not connected or some kind of error. I have tried SQL Commands and then it gives me this Error:*ORA-01501: CREATE DATABASE failed*
ORA-01100: database already mounted
How come Oracle dont have just a simple button:CREATE DATABASE?
Somebody please help!

Duplicate thread ?
Creating a DATABASE with ORACLE!
Srini

Oracle.dataaccess.lite_wce.dll and what would be the dll for berklay and sq

Hi all,
With oracle lite and vb.net we are using oracle.dataaccess.lite_wce.dll for data access..
What is the new dll for the berklay and vb . net for windows mobile 6.x devices.
What is the new dll for the sqlite and vb. net for windows mobile 6.x devices.
Please post the url for the downloads of those and the usage of api.
This will be helpful to others as well.
Thanks
Paninie.

Hi rekounas,
Thanks for the reply. I downloaded the System.Data.SQLite.dll..site says we need .net compact 3.5 and above for this dll.
It seems that the application which use oracle.dataaccess.lite_wce.dll has to be changed to suit to
sqlite..... And im trying to test them.. what is the dll for berklay for the .net? It looks the applications needs lot of changes on this
and oracle site does not have the requiierd dll in their site like the oracle.dataaccess.lite_wce.dll
will have to do lot of experiments in doing this...
Will post the progress once the testing started .. thanks
paninie

Upgrade of Database with Oracle Change Data Capture

Hello,
We are upgrading and moving our database to a different server.
The move is from 10G R1 database on Solaris to 11G R2 on Linux.
Our database uses Oracle Change Data Capture.
What is the best way to perform this migration? Unlike in the approach below, ideally, it would be without any manual steps to drop and recreate CDC subscriptions, change tables, etc.
Thanks.
Considerations for Exporting and Importing Change Data Capture Objects
http://docs.oracle.com/cd/B13789_01/server.101/b10736/cdc.htm#i1027532
Starting in Oracle Databse 10g, Oracle Data Pump is the supported export and import utility for Change Data Capture. Change Data Capture change sources, change sets, change tables, and subscriptions are exported and imported by the Oracle Data Pump expdp and impdp commands with the following restrictions:
After a Data Pump full database import operation completes for a database containing AutoLog Change Data Capture objects, the following steps must be performed to restore these objects:
1. The publisher must manually drop the change tables with the SQL DROP TABLE command. This is needed because the tables are imported without the accompanying Change Data Capture metadata.
2. The publisher must re-create the AutoLog change sources, change sets, and change tables using the appropriate DBMS_CDC_PUBLISH procedures.
3. Subscribers must re-create their subscriptions to the AutoLog change sets.

Hello,
I opened SR with Oracle Support, they are suggesting to perform full database import/export
Change Data Capture change sources, change sets, change tables, and subscriptions are exported and imported by the Oracle Data Pump expdp and impdp commands with the following restrictions.
Change Data Capture objects are exported and imported only as part of full database export and import operations (those in which the expdp and impdb commands specify the FULL=y parameter). Schema-level import and export operations include some underlying objects (for example, the table underlying a change table), but not the Change Data Capture metadata needed for change data capture to occur."
CDC has different implementation methods:
You may use the below query to determine-
select SOURCE_NAME, SOURCE_DESCRIPTION, CREATED, SOURCE_TYPE, SOURCE_DATABASE, SOURCE_ENABLED from change_sources;
– Synchronous CDC: with this implementation method you capture changes
synchronously on the source database into change tables. This method uses
internal database triggers to enable CDC. Capturing the change is part of the
original transaction that introduces the change thus impacting the performance
of the transaction.
– Asynchronous Autolog CDC: this implementation method requires a staging
database separate from the source database. Asynchronous Autolog CDC uses
the database's redo transport services to transport redo log information from
the source database to the staging database1. Changes are captured at the
staging database. The impact to the source system is minimal, but there is some
latency between the original transaction and the change being captured.
As suggested in the document-
Change Data Capture objects are exported and imported only as part of full database export and import operations (those in which the expdp and impdb commands specify the FULL=y parameter). Schema-level import and export
operations include some underlying objects (for example, the table underlying a change table), but not the Change Data Capture metadata needed for change data capture to occur.
■ AutoLog change sources, change sets, and change tables are not supported.
Starting in Oracle Database 10g, Oracle Data Pump is the supported export and import utility for Change Data Capture.
Re-Creating AutoLog Change Data Capture Objects After an Import Operation
http://docs.oracle.com/cd/B19306_01/server.102/b14223/cdc.htm#i1027532
After a Data Pump full database import operation completes for a database containing AutoLog Change Data Capture objects, the following steps must be performed to restore these objects:
a. The publisher must manually drop the database objects underlying AutoLog Change Data Capture objects.
b. The publisher must re-create the AutoLog change sources, change sets, and change tables using the appropriate DBMS_CDC_PUBLISH procedures.
c. Subscribers must re-create their subscriptions to the AutoLog change sets.

Apply Patches on Oracle Database with Logical Standby Database

Here I am:
I got a primary database with a logical standby database running Oracle 11g. I got two client applications, one is the production site pointing to the primary one, another one is just a backup site pointing to the logical one.Things will only be written into the primary database every mid night and client applications can only query the database but not add, update nor delete.And now, I want to apply the latest patch on both of my databases. I am also the DNS administrator, I can make the name server pointing to the backup site instead of the production one.I want to firstly apply the patch on the logical one, and then the physical one.
I found some reference which explains how to apply patches by adopting "Rolling Upgrade Method". however, I want to avoid doing any "switch over" mentioned in the reference because I can make use of name server. Can I just apply patches as the following way?
1)Stop SQL apply
2)Apply patches on logical standby database
3)let the name server point to the backup site
4)Apply patches on the primary database
5)Start SQL apply
6)Let the name server point back to the production site
Thanks in advance.

Pl follow the steps in MOS Doc 437276.1 ( Upgrading Oracle Database with a Logical Standby Database In Place )
HTH
Srini

Creating a new database with oracle express

how to create a database with oracle express. the web based interface for managing oracle sucks and it is too slow, they'd bet better of developing a rich client application for managing XE. Oracle XE comapraed to SQL Express is very poor.

Try to post it Oracle Database Express Edition (XE)<br>
<br>
Nicolas.

Connect to oracle database with Oracle.DataAccess.Lite_wce.dll

Similar Messages

Maybe you are looking for