Database MDS personalization not working for ADF

NA
Edited by: Mukesh S Patil on May 28, 2013 1:52 PM

Hi Frank and all
1] The issue is when i deploy from console uploading the .ear file ( which has adf-config.xml ) , the application never connects to MDS database. I feel that it is not reading adf-config.xml at all
2] However when i deploy same using JDeveloper, a window pop up asking the MDS partition name. This time it works . :-)
But in production i can not deploy through JDeveloper. Then how to tell the application that there is configuration file,read it and store data ???
Mukesh

Similar Messages

Fault handling from MDS is not working for messagerejection

Hi All,
I am sorry if i am asking simple things, but after trying i couldn't figure out the problem so i reached here.
In my project i am using file adapter in many places, so rejection handler is very important in finding out the missing files at the time of reading the file.So i created fault policies and bindings and i created simple process and placed the polices and binding files in the project, as expected it is working fine but if i referred the same files from my mds path rejection is not working.
here is my fault polices and binding files.
faultpolices.xml
<?xml version='1.0' encoding='UTF-8'?>
<faultPolicies version="2.0.1" xmlns="http://schemas.oracle.com/bpel/faultpolicy">
<faultPolicy version="2.0.1" id="BpelFaultMechanism" xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="http://schemas.oracle.com/bpel/faultpolicy" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Conditions>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension" name="bpelx:bindingFault">
<condition>
<action ref="retry-action"/>
</condition>
</faultName>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension" name="bpelx:remoteFault">
<condition>
<action ref="retry-action"/>
</condition>
</faultName>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension" name="bpelx:selectionFailure">
<condition>
<action ref="retry-action"/>
</condition>
</faultName>
</Conditions>
<Actions>
<Action id="retry-action">
<retry>
<retryCount>4</retryCount>
<retryInterval>2</retryInterval>
<retryFailureAction ref="rethrow-action"/>
</retry>
</Action>
<Action id="human-intervention-action">
<humanIntervention/>
</Action>
<Action id="abort-action">
<abort/>
</Action>
<Action id="replay-action">
<replayScope/>
</Action>
<Action id="rethrow-action">
<rethrowFault/>
</Action>
<Action id="ora-terminate">
<abort/>
</Action>
</Actions>
</faultPolicy>
<faultPolicy version="2.0.1" id="RejectedMessages">
<Conditions>
<faultName xmlns:rjm="http://schemas.oracle.com/sca/rejectedmessages" name="rjm:Messagerejection">
<condition>
<action ref="writeToFile"/>
</condition>
</faultName>
</Conditions>
<Actions>
<Action id="writeToFile">
<fileAction>
<location>/u01/textdata/SOADEV/rejection</location>
<fileName>Messagerejection_%ID%_%TIMESTAMP%.xml</fileName>
</fileAction>
</Action>
</Actions>
</faultPolicy>
</faultPolicies>
Note:-In the above xml fault policy BpelFaultMechanism is used in all composite for common remote and binding fault errors and this one is working fine from mds location.
Fault-Binding.xml
<?xml version='1.0' encoding='windows-1252'?>
<faultPolicyBindings version="2.0.1" xmlns="http://schemas.oracle.com/bpel/faultpolicy" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<composite faultPolicy="BpelFaultMechanism"/>
<service faultPolicy="RejectedMessages">
<name>Messagerejection</name>
</service>
</faultPolicyBindings>
Composite.xml
<?xml version="1.0" encoding="UTF-8" ?>

<composite name="Messagerejection"
revision="1.0"
label="2012-09-30_17-41-29_597"
mode="active"
state="on"
xmlns="http://xmlns.oracle.com/sca/1.0"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy"
xmlns:orawsp="http://schemas.oracle.com/ws/2006/01/policy"
xmlns:ui="http://xmlns.oracle.com/soa/designer/">
<import namespace="http://xmlns.oracle.com/pcbpel/adapter/file/Correlation/Messagerejection/Messagerejection"
location="Messagerejection.wsdl" importType="wsdl"/>
<service name="Messagerejection" ui:wsdlLocation="Messagerejection.wsdl">
<interface.wsdl interface="http://xmlns.oracle.com/pcbpel/adapter/file/Correlation/Messagerejection/Messagerejection#wsdl.interface(Read_ptt)"/>
<binding.jca config="Messagerejection_file.jca"/>
<property name="oracle.composite.faultPolicyFile">oramds:/apps/Faultpolicyfiles/fault_policies.xml</property>
<property name="oracle.composite.faultBindingFile">oramds:/apps/Faultpolicyfiles/fault_binding.xml</property>
</service>
<component name="Messagerejectionservice" version="1.1">
<implementation.bpel src="Messagerejectionservice.bpel"/>
<property name="bpel.config.oneWayDeliveryPolicy" type="xs:string"
many="false">async.cache</property>
</component>
<wire>
<source.uri>Messagerejection</source.uri>
<target.uri>Messagerejectionservice/Messagerejection</target.uri>
</wire>
</composite>
Also in some cases i am going with De-batching option,in which my xml file contains multiple record and publishing each record to the target service. In this case if any record has improper content then that particular record from should move to the custom folder.Please let me know how can i do this.
I hope some one will help me here.
Regards,
Tarak

Hi Kalyan,
Thanks for helping me here.
Now i am able to resolve the issue after restarting the server i place the properties of the files as below
<?xml version="1.0" encoding="UTF-8" ?>

<composite name="Messagerejection"
revision="1.0"
label="2012-09-30_17-41-29_597"
mode="active"
state="on"
xmlns="http://xmlns.oracle.com/sca/1.0"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy"
xmlns:orawsp="http://schemas.oracle.com/ws/2006/01/policy"
xmlns:ui="http://xmlns.oracle.com/soa/designer/">
<import namespace="http://xmlns.oracle.com/pcbpel/adapter/file/Correlation/Messagerejection/Messagerejection"
location="Messagerejection.wsdl" importType="wsdl"/>
<service name="Messagerejection" ui:wsdlLocation="Messagerejection.wsdl">
<interface.wsdl interface="http://xmlns.oracle.com/pcbpel/adapter/file/Correlation/Messagerejection/Messagerejection#wsdl.interface(Read_ptt)"/>
<binding.jca config="Messagerejection_file.jca"/>
</service>
<property name="oracle.composite.faultPolicyFile">oramds:/apps/Faultpolicyfiles/fault_policies.xml</property>
<property name="oracle.composite.faultBindingFile">oramds:/apps/Faultpolicyfiles/fault_binding.xml</property>
<component name="Messagerejectionservice" version="1.1">
<implementation.bpel src="Messagerejectionservice.bpel"/>
<property name="bpel.config.oneWayDeliveryPolicy" type="xs:string"
many="false">async.cache</property>
</component>
<wire>
<source.uri>Messagerejection</source.uri>
<target.uri>Messagerejectionservice/Messagerejection</target.uri>
</wire>
</composite>
Regards,
Tarak

Database Upgrade Agent not working for upgrading Oracle 9i DB to Oracle 10i

Hi All,
Presently I have completed my Oracle 10i installation on Solaris Server but I am facing an issue during the upgrade process of Oracle 9i to 10g. Whenever I try to upgrade the 9i databases to 10g using DBUA(Database Upgrade assistant) I am facing an issue that Data base not running from oracle home or pfile not found. The exact error message says:-
The upgrade assistant failed in bringing up the database XIPCOTS. Oracle Home /opt/apps/home/oracle9i/product/releases/92/92 obtained from file /var/opt/oracle/oratab was used to connect to the database. Either the database is not running from Oracle Home /opt/apps/home/oracle9i/product/releases/92/92 or the correct Initialisation parameter file (pfile) was not found. To start the database , Oracle needs the pfile. Provide the full path name of the init file for the database XIPCOTS.
In reality the XIPCOTS database is running fine in Oracle 9i and we can connect it using PL/SQL developer in windows.I have also provided the path of pfile but it is still not accepting the same.
Path of pfile I provided :- /XIP/ofaroot/XIPCOTS/pfile/initXIPCOTS.ora
Any help or suggestions would be greately appreciated.
Our both Oracle 9i and 10g are installed on same Solaris server where solaris version is 9
Installation path for 9i :- /opt/apps/home/oracle9i/product/releases/92/92
Installation path for 10g :- /opt/apps/home/oracle/product/releases/10201
Oracle 9i version :- 9.2.0.7
Oracle 10g version :- 10.2.01
Thanks in advance.
Best Regards,
Gourav Banerjee

Can you please mention the specific folder name under oracle home where we need to put this pfile because there are two folder dbs and ds I have allready tried putting it inside dbs its not working. And my home path is correct I hope and is set for oracle 9i directories in the .oraenv file do we need to set it for oracle 10g before the DBUA upgrade.

Standalone Weblogic deployment not working for ADF Table

Hi All,
I have create one application using JDeveloper 11g R3. I have taken one ADF Rich Table
When i run application in Jdeveloper it runs fine.
Now issue is when i deployee the same in standalone Weblogic server it is not running(Page gets open but table dosent display).
But when i use same datacontrol and drag it as ADF Form it is working fine.
Also weblogic server is not showing any logs.
Please suggest.
Thanks,
Vijay

The Admin Server Log is bellow,
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=E:\Oracle\MIDDLE~1\WLSERV~1.3\server\ext\jdbc\oracle\11g\ojdbc6dms.jar;E:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sys_manifest_classpath\w
ic_patch.jar;E:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;E:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;E:\Orac
DDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;E:\Oracle\MIDDLE~1\modules\features\weblogic.server.modu
0.3.3.0.jar;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;E:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;E:\Oracle\MIDDLE~1\modules\NETSF
_1/lib/ant-contrib.jar;E:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;E:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;E:\Orac
DDLE~1\WLSERV~1.3\server\lib\xqrl.jar;E:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sys_manifest_classpath\weblogic_patch.jar;E:\Oracle\MIDDLE~1\patch_
111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;E:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;E:\Oracle\MIDDLE~1\utils\config\10.3\config-launch
E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;E:\Oracle\MIDDLE~1\modules\features\weblogic
er.modules_10.3.3.0.jar;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;E:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;E:\Oracle\MIDDLE~1\m
s\NETSFA~1.0_1/lib/ant-contrib.jar;E:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbynet.jar;E:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.j
PATH=E:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\native;E:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;E:\Oracle\MIDDLE~1\WLSERV~1.3\serve
ive\win\32;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;E:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;E:\Oracle\MIDDLE~1\JDK160~1\jre\bin;E:\Oracle\MIDDLE~1\JDK160
n;E:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\native;E:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\n
\win\32;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;E:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;E:\Oracle\MIDDLE~1\JDK160~1\jre\bin;E:\Oracle\MIDDLE~1\JDK160~1\
:\Oracle\app\product\11.2.0\dbhome_1\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;E:\Oracle\MIDD
WLSERV~1.3\server\native\win\32\oci920_8;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode)
Starting WLS with line:
E:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=AdminSer
Djava.security.policy=E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Xverify:none -Xverify:none -da -Dplatform.home=E:\Oracle\MIDDLE~1\WLSERV~
Dwls.home=E:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=E:\Oracle\MIDDLE~1\WLSERV~1.3\server -Ddomain.home=E:\Oracle\MIDDLE~1\USER_P~1\domains\BASE
-Dcommon.components.home=E:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djr
.optfile=E:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=E:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\
g\FMWCON~1 -Doracle.server.config.dir=E:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\FMWCON~1\servers\AdminServer -Doracle.security.jps.config=E:\Orac
DDLE~1\USER_P~1\domains\BASE_D~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=E:\Oracle
LE~1\USER_P~1\domains\BASE_D~1\config\FMWCON~1\carml -Digf.arisidstack.home=E:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\FMWCON~1\arisidprovider -D
gic.alternateTypesDirectory=E:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,E:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dwebl
jdbc.remoteEnabled=false -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=E:\Orac
DDLE~1\patch_wls1033\profiles\default\sysext_manifest_classpath;E:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Serv
<Jan 19, 2011 4:34:37 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 16.0-b13 from Sun Micr
ems Inc.>
<Jan 19, 2011 4:34:37 PM IST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 >
<Jan 19, 2011 4:34:38 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jan 19, 2011 4:34:38 PM IST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Jan 19, 2011 4:34:38 PM IST> <Notice> <Log Management> <BEA-170019> <The server log file E:\Oracle\Middleware\user_projects\domains\base_domain\servers\Ad
rver\logs\AdminServer.log is opened. All server side log events will be written to this file.>
<Jan 19, 2011 4:34:40 PM IST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Jan 19, 2011 4:34:43 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Jan 19, 2011 4:34:43 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jan 19, 2011 4:34:48 PM IST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service succes
y.>
<Jan 19, 2011 4:34:48 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Jan 19, 2011 4:34:48 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Jan 19, 2011 4:34:48 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on fe80:0:0:0:0:5efe:a81:c06c:7001 for protocols iiop,
dap, snmp, http.>
<Jan 19, 2011 4:34:48 PM IST> <Warning> <Server> <BEA-002611> <Hostname "INEDEC-ENP-70.emrsn.org", maps to multiple IP addresses: 10.129.192.108, fe80:0:0:
1:2cf6:49b4:9963%11>
<Jan 19, 2011 4:34:48 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on 0:0:0:0:0:0:0:1:7001 for protocols iiop, t3, ldap, s
http.>
<Jan 19, 2011 4:34:48 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, h
<Jan 19, 2011 4:34:48 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.129.192.108:7001 for protocols iiop, t3, ldap, snmp,
.>
<Jan 19, 2011 4:34:48 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:31c1:2cf6:49b4:9963:7001 for protocols ii
3, ldap, snmp, http.>
<Jan 19, 2011 4:34:48 PM IST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "AdminServer" for domain "base_domain" running in Devel
t Mode>
<Jan 19, 2011 4:34:48 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Jan 19, 2011 4:34:48 PM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Jan 19, 2011 4:46:29 PM IST> <Error> <org.apache.beehive.netui.pageflow.internal.AdapterManager> <BEA-000000> <ServletContainerAdapter manager not initial
correctly.>
<Jan 19, 2011 4:47:01 PM IST> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nf
ue&_pageLabel=AppApplicationOverviewPage&AppApplicationOverviewPortlethandle=com.bea.console.handles.AppDeploymentHandle%28%22com.bea%3AName%3DFMW+Welcome+
Application%2311.1.0.0.0%2CType%3DAppDeployment%22%29.>
<Jan 19, 2011 4:48:08 PM IST> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nf
ue&_pageLabel=AppApplicationOverviewPage&AppApplicationOverviewPortlethandle=com.bea.console.handles.AppDeploymentHandle%28%22com.bea%3AName%3Dtestdep%2CTy
AppDeployment%22%29.>
<Jan 19, 2011 4:48:45 PM IST> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nf
ue&_pageLabel=AppApplicationOverviewPage&AppApplicationOverviewPortlethandle=com.bea.console.handles.AppDeploymentHandle%28%22com.bea%3AName%3DFMW+Welcome+
Application%2311.1.0.0.0%2CType%3DAppDeployment%22%29.>
<Jan 19, 2011 4:49:03 PM IST> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nf
ue&_pageLabel=AppApplicationOverviewPage&AppApplicationOverviewPortlethandle=com.bea.console.handles.AppDeploymentHandle%28%22com.bea%3AName%3Dtestdep%2CTy
AppDeployment%22%29.>
<Jan 19, 2011 4:49:45 PM IST> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nf
ue&_pageLabel=AppApplicationOverviewPage&AppApplicationOverviewPortlethandle=com.bea.console.handles.AppDeploymentHandle%28%22com.bea%3AName%3DFMW+Welcome+
Application%2311.1.0.0.0%2CType%3DAppDeployment%22%29.>

Alerts are not working for Site collections in a content database

Hi,
We have been into a strange issue that alerts are not working for site collections from a particular content database. When user subscribed for the alerts, they are getting mail about their subscription but not after that for any new items/documents added
or changes happen in the list/document library.
We have tried with Immediate as well as scheduled alerts both are not working.
FYI, Alerts for all other site collections from different content database for the same web application are working without any issues.
Any help would be appreciated.
Thanks
Ramkumar

Looks like an Timer job Issue for your web application. Can you please check if these jobs are enabled and check error log for the alerts Timer jobs .Check whether the "Immediate Alerts" job is enabled for your web application.
job-immediate-alerts
job-daily-alerts
job-weekly-alerts
Please check this wiki -
Troubleshooting Steps for SharePoint Alert Email Does Not Go Out
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

Why String Search in not working in ADF.?

Hi,
    I've created application in ADF with Search Options. Search Operation is working for all the Integer Values in that page but its not working for String Values.
I dont know why its not able to search String Values.
My AppModule bean Code :
                package model.portfolio.portfolio.am;
import model.portfolio.portfolio.am.common.PortfolioAppModuleAM;
import model.portfolio.portfolio.view.ResourceViewChildObjImpl;
import oracle.jbo.VariableValueManager;
import oracle.jbo.ViewCriteria;
import oracle.jbo.server.ApplicationModuleImpl;
import oracle.jbo.server.ViewLinkImpl;
import oracle.jbo.server.ViewObjectImpl;
public class PortfolioAppModuleAMImpl extends ApplicationModuleImpl implements PortfolioAppModuleAM {
     * This is the default constructor (do not remove).
    public PortfolioAppModuleAMImpl() {
    public void applyVCforGlobalSearchPortfolios(String theString){
        ViewObjectImpl vo = getPortfolio1();
        ViewCriteria vc = vo.getViewCriteria("PortfolioVOCriteria");
        System.out.println("On Criteria");
        vc.resetCriteria();
        VariableValueManager vvm = vc.ensureVariableManager();
        System.out.println("On String");
        vvm.setVariableValue("globalSearchString", theString);
        System.out.println("After String");
        vo.applyViewCriteria(vc,true);
        vo.executeQuery();
*All Getters and Setter of all VO and VLs****
My Query created in View Criteria :
( (UPPER(SHORTNAME) LIKE UPPER( :globalSearchString || '%') ) OR (UPPER(DESCRIPTION) LIKE UPPER( :globalSearchString || '%') ) AND (PROGRAMMES_COUNT = :globalSearchString ) OR (KK_COUNT = :globalSearchString ) OR (KPI_KRA_VALUE = :globalSearchString ) )
One more interesting thing in After Creating the View Criteria If i try to Test this Query, Its giving me error msg as
"Cannot complete query to determine the view attributes. Either the query is invalid or timeout occurs. Please revise the query or create the view attributes manually.
"com.mysql.jdbc.exceptions.jdbc4.MySQLSyntaxErrorException: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ':globalSearchString || '%') ) OR (UPPER(QRSLT.DESCRIPTION) LIKE UPPER( :globalSe' at line 1"
I don know why... Can somebody please help me?
Im using Jdev 12C

Binding variables will be different from oracle database and My Sql database.
Oracle database use this (:) for defining bindVariable but in My Sql use this (?)
Try to remove the view criteria which you define in View Object and you can make it programmatically like this:
    ViewObject vo = getPortfolio1();
    ViewCriteria vc = vo.createViewCriteria();
    ViewCriteriaRow vcr = vc.createViewCriteriaRow();
    vcr.setAttribute("Attribute1", value);
    vcr.setAttribute("Attribute2", value);
    vc.add(vcr);
    vo.applyViewCriteria(vc);
    vo.executeQuery();

Select All in a table does not work for Drag and Drop

Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3.
I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all rows are selected, but when I try to click on one of the selected rows to drag to the other table, only the row I click on is dragged.
I tried setting Range Size -1, fetch mode to FETCH_ALL, content delivery to "immediate" but nothing works.
I even have reproduced not using a view object but just a List of beans with only 5 or 10 beans showing in the table.
Does anyone know how to get Select All to work for a Drag Source?
Thanks.
-Ed

Frank-
OK, thanks for looking into that. I also submitted this service request, which includes a simple sample app to demonstrate the problem:
SR #3-2387481211: ADF Drag and Drop does not work for rows in table using Select All
Thanks again for the reply.
-Ed

Thunderbird Mission Control Desktop/AutoConfig not working for some users

I have the file: "C:\Program Files (x86)\Mozilla Thunderbird\defaults\pref\custom.js"
It contains:
pref("general.config.obscure_value", 0);
pref("general.config.filename", "TMcustom.cfg");
I have the file: "C:\Program Files (x86)\Mozilla Thunderbird\TMcustom.cfg"
It contains:
var promptService = Components.classes["@mozilla.org/embedcomp/prompt-service;1"]
.getService(Components.interfaces.nsIPromptService);
promptService.alert(null, "title", "testing");
For most of my users the alert pops up fine when I start Thunderbird, but for a few it doesn't. All of the machines where setup with the same install script. If I log into one of the machines where it's not working as a different user, then it works fine, so I know the files are in the right spot. So why would it not work for specific users? Is there something in the user's Windows profile that could cause it to not work? Or are there any other suggestions?

As it turns out this was a known bug that was corrected in the recent release of Java 7_65 and Java 8_11. Here is a link to the bug description in the database.
Bug ID: JDK-8019274 RMI thread can no longer call out to AWT thread for webstart app

Auto_lexer (stemming) not working for other languages(other than english)

Hi All,
We are planning to use AUTO_LEXER instead of MULTI_LEXER and observed that stemming is not working for German where as it is working for English when I use AUTO_LEXER. I even used query templates but of no use.
But when i use MULTI_LEXER, creating sub lexers for German and Enlgish, Stemming is working for German also after changing the session language and setting stemmer of wod list to German (Which is expected).
Following is the code for AUTO_LEXER creation:
CREATE TABLE test_auto_lexer(pkey NUMBER(5,0),
lang_index VARCHAR2(3),
content_text CLOB,
CONSTRAINT test_auto_lexer_pk primary key (pkey))
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (1,'eng','I drive a bike')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (2,'eng','I drove a bike')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (3,'eng','I have driven a bike')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (4,'eng','Just check for other things')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (5,'eng','always drive a car')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (6,'eng','it is nothing')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (7,'ger','Ich fahre ein Fahrrad')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (8,'ger','Ich fuhr ein Fahrrad')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (9,'ger','Ich habe ein Fahrrad gefahren')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (10,'ger','Aktivieren Sie einfach für andere Dinge')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (11,'ger','immer Auto fahren')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (12,'ger','es ist nichts')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (13,'ger','sprechen')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (14,'ger','sprach')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (15,'ger','gesprochen')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (16,'ger','tale')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (17,'ger','Indlæg')
INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
VALUES (18,'ger','tales')
BEGIN
ctx_ddl.create_preference('auto_lexer1', 'auto_lexer');
END;
BEGIN
ctx_ddl.set_attribute('auto_lexer1','index_stems','yes');
END;
BEGIN
ctx_ddl.set_attribute('auto_lexer1','language','danish english german');
END;
BEGIN
ctx_ddl.set_attribute('auto_lexer1','alternate_spelling','german');
END;
CREATE INDEX test_auto_lexer_ix1
ON test_auto_lexer(content_text)
INDEXTYPE IS ctxsys.context
PARAMETERS ('datastore ctxsys.direct_datastore filter ctxsys.null_filter lexer auto_lexer1')
select to_char(content_Text) from test_auto_lexer where contains(content_text,
'<query>
<textquery lang="ger" grammar="context">
$fahren
</textquery>
<score datatype="integer"/>
</query>') > 0
this doesnt work even after changing the session language. My default Sesson language is AMERICAN.
Could any one help me with this, in case I am missing something here. I would be really thankful.
Edited by: Nagendra Prasad on Jan 23, 2010 12:05 AM

In the future, please begin a new thread for a new question and provide a link to a related question.
According to the online documentation, Oracle only supports stemming for English, Dutch, French, German, Italian, Spanish, and Japanese. Oracle does not support Russian stemming, although you may have gotten some accidental results, due to identifying it as a different language and applying stemming rules for that language. The following manual sections show the languages available for the index_stems attribute of the basic_lexer and stemmer attribute of the basic_wordlist:
Basic_lexer attributes:
http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#CIHHBAAD
Basic_wordlist attributes:
http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#g1019326
Also, please see the following note:
Features not available in 11.2.0.3:
http://docs.oracle.com/cd/E11882_01/readmes.112/e22488/toc.htm#BABDGGDB
"Certain Oracle Text functionality based on third-party technologies, including AUTO_LEXER and CTX_ENTITY, have been disabled in this release (reference Bug 12618046). For BASIC_LEXER, the usage of the INDEX_STEMS attribute values that depend on third-party technologies, is also affected. If this impacts an existing application, contact Oracle Support Services for guidance."
Also, the auto_lexer has been replaced by the world_lexer, which only has one attribute:
http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#BHCJEGFJ
I don't work for Oracle, so I don't know why they do things the way they do.
So, you need to stick with the basic_wordlist for stemming, not the lexers. However, you may get better performance by combining the multi_lexer with the basic_wordlist, as the multi_lexer eliminates time spent on automatic language detection. But, you need to remember not to use the index_stems with your lexer, since it will conflict with the wordlist. I am not experiencing any time problems as you have. Please see the demo below. I have provided the whole script below that, so that you can reproduce it on your system. If you still have problems, then it may be due to differences in versions.
-- demo:
SCOTT@orcl_11gR2> select * from v$version
2 /
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE     11.2.0.1.0     Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
5 rows selected.
SCOTT@orcl_11gR2> select value from v$nls_parameters
2 where parameter = 'NLS_CHARACTERSET'
3 /
VALUE
AL32UTF8
1 row selected.
SCOTT@orcl_11gR2> DROP TABLE news
2 /
Table dropped.
SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('my_wordlist')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('global_lexer')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('english_LEXER')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('german_LEXER')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> CREATE TABLE news
2    (pkey            NUMBER,
3      lang            VARCHAR2 (2),
4      short_content CLOB)
5 /
Table created.
SCOTT@orcl_11gR2> INSERT ALL
2 INTO news (pkey, lang, short_content)
3    VALUES (1, 'en', 'I drive a bike.')
4 INTO news (pkey, lang, short_content)
5    VALUES (2, 'en', 'I drove a bike.')
6 INTO news (pkey, lang, short_content)
7    VALUES (3, 'en', 'I have driven a bike.')
8 INTO news (pkey, lang, short_content)
9    VALUES (4, 'en', 'I always drive a car')
10 INTO news (pkey, lang, short_content)
11    VALUES (5, 'en', 'This is nothing')
12 INTO news (pkey, lang, short_content)
13    VALUES (6, 'de', 'Ich fahre ein Fahrrad.')
14 INTO news (pkey, lang, short_content)
15    VALUES (7, 'de', 'Ich fuhr ein Fahrrad.')
16 INTO news (pkey, lang, short_content)
17    VALUES (8, 'de', 'Ich habe ein Fahrrad gefahren.')
18 INTO news (pkey, lang, short_content)
19    VALUES (9, 'de', 'Ich habe immer ein Auto fahren.')
20 INTO news (pkey, lang, short_content)
21    VALUES (10, 'de', 'Es ist nichts.')
22 SELECT * FROM DUAL
23 /
10 rows created.
SCOTT@orcl_11gR2> BEGIN
2    -- word list:
3    ctx_ddl.create_preference ('my_wordlist',   'basic_wordlist');
4    ctx_ddl.set_attribute      ('my_wordlist',   'stemmer',           'auto');
5    -- english lexer:
6    ctx_ddl.create_preference ('english_lexer', 'basic_lexer');
7    -- german lexer:
8    ctx_ddl.create_preference ('german_lexer', 'basic_lexer');
9    ctx_ddl.set_attribute      ('german_lexer', 'composite',       'german');
10    ctx_ddl.set_attribute      ('german_lexer', 'alternate_spelling', 'german');
11    ctx_ddl.set_attribute      ('german_lexer', 'mixed_case',       'no');
12    ctx_ddl.set_attribute      ('german_lexer', 'base_letter',       'yes');
13    -- multi_lexer:
14    ctx_ddl.create_preference ('global_lexer', 'multi_lexer');
15    ctx_ddl.add_sub_lexer      ('global_lexer', 'default',            'english_lexer');
16    ctx_ddl.add_sub_lexer      ('global_lexer', 'german',            'german_lexer');
17 END;
18 /
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> create index search_news
2 on news (short_content)
3 indextype is ctxsys.context
4 parameters
5    ('lexer            global_lexer
6       language column lang
7       wordlist       my_wordlist')
8 /
Index created.
SCOTT@orcl_11gR2> EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'NEWS')
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> COLUMN short_content FORMAT A30
SCOTT@orcl_11gR2> ALTER SESSION SET NLS_LANGUAGE = 'AMERICAN'
2 /
Session altered.
SCOTT@orcl_11gR2> set timing on
SCOTT@orcl_11gR2> select * from news
2 where contains (short_content, '$drive') > 0
3 /
      PKEY LA SHORT_CONTENT
         1 en I drive a bike.
         2 en I drove a bike.
         3 en I have driven a bike.
         4 en I always drive a car
4 rows selected.
Elapsed: 00:00:00.05
SCOTT@orcl_11gR2> select * from news
2 where contains (short_content, '$drove') > 0
3 /
      PKEY LA SHORT_CONTENT
         1 en I drive a bike.
         2 en I drove a bike.
         3 en I have driven a bike.
         4 en I always drive a car
4 rows selected.
Elapsed: 00:00:00.05
SCOTT@orcl_11gR2> ALTER SESSION SET NLS_LANGUAGE = 'GERMAN'
2 /
Session altered.
Elapsed: 00:00:00.01
SCOTT@orcl_11gR2> select * from news
2 where contains (short_content, '$fahr') > 0
3 /
      PKEY LA SHORT_CONTENT
         6 de Ich fahre ein Fahrrad.
         7 de Ich fuhr ein Fahrrad.
         8 de Ich habe ein Fahrrad gefahren.
         9 de Ich habe immer ein Auto fahren
4 rows selected.
Elapsed: 00:00:00.07
SCOTT@orcl_11gR2> select * from news
2 where contains (short_content, '$fuhr') > 0
3 /
      PKEY LA SHORT_CONTENT
         6 de Ich fahre ein Fahrrad.
         7 de Ich fuhr ein Fahrrad.
         8 de Ich habe ein Fahrrad gefahren.
         9 de Ich habe immer ein Auto fahren
4 rows selected.
Elapsed: 00:00:00.16-- script for you to reproduce the demo on your system:
select * from v$version
select value from v$nls_parameters
where parameter = 'NLS_CHARACTERSET'
DROP TABLE news
EXEC CTX_DDL.DROP_PREFERENCE ('my_wordlist')
EXEC CTX_DDL.DROP_PREFERENCE ('global_lexer')
EXEC CTX_DDL.DROP_PREFERENCE ('english_LEXER')
EXEC CTX_DDL.DROP_PREFERENCE ('german_LEXER')
CREATE TABLE news
(pkey           NUMBER,
   lang           VARCHAR2 (2),
   short_content CLOB)
INSERT ALL
INTO news (pkey, lang, short_content)
VALUES (1, 'en', 'I drive a bike.')
INTO news (pkey, lang, short_content)
VALUES (2, 'en', 'I drove a bike.')
INTO news (pkey, lang, short_content)
VALUES (3, 'en', 'I have driven a bike.')
INTO news (pkey, lang, short_content)
VALUES (4, 'en', 'I always drive a car')
INTO news (pkey, lang, short_content)
VALUES (5, 'en', 'This is nothing')
INTO news (pkey, lang, short_content)
VALUES (6, 'de', 'Ich fahre ein Fahrrad.')
INTO news (pkey, lang, short_content)
VALUES (7, 'de', 'Ich fuhr ein Fahrrad.')
INTO news (pkey, lang, short_content)
VALUES (8, 'de', 'Ich habe ein Fahrrad gefahren.')
INTO news (pkey, lang, short_content)
VALUES (9, 'de', 'Ich habe immer ein Auto fahren.')
INTO news (pkey, lang, short_content)
VALUES (10, 'de', 'Es ist nichts.')
SELECT * FROM DUAL
BEGIN
-- word list:
ctx_ddl.create_preference ('my_wordlist',   'basic_wordlist');
ctx_ddl.set_attribute     ('my_wordlist',   'stemmer',            'auto');
-- english lexer:
ctx_ddl.create_preference ('english_lexer', 'basic_lexer');
-- german lexer:
ctx_ddl.create_preference ('german_lexer', 'basic_lexer');
ctx_ddl.set_attribute     ('german_lexer', 'composite',          'german');
ctx_ddl.set_attribute     ('german_lexer', 'alternate_spelling', 'german');
ctx_ddl.set_attribute     ('german_lexer', 'mixed_case',          'no');
ctx_ddl.set_attribute     ('german_lexer', 'base_letter',         'yes');
-- multi_lexer:
ctx_ddl.create_preference ('global_lexer', 'multi_lexer');
ctx_ddl.add_sub_lexer     ('global_lexer', 'default',             'english_lexer');
ctx_ddl.add_sub_lexer     ('global_lexer', 'german',              'german_lexer');
END;
create index search_news
on news (short_content)
indextype is ctxsys.context
parameters
('lexer            global_lexer
    language column lang
    wordlist         my_wordlist')
EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'NEWS')
COLUMN short_content FORMAT A30
ALTER SESSION SET NLS_LANGUAGE = 'AMERICAN'
set timing on
select * from news
where contains (short_content, '$drive') > 0
select * from news
where contains (short_content, '$drove') > 0
ALTER SESSION SET NLS_LANGUAGE = 'GERMAN'
select * from news
where contains (short_content, '$fahr') > 0
select * from news
where contains (short_content, '$fuhr') > 0
/

Cascading Select Lists - Not Working for me

I am trying to implement Denes Kubicek's Ajax Cascading Select List solution.
http://apex.oracle.com/pls/otn/f?p=31517:119
But it is not working for me.
I'm a newbie to APEX and checked the forum for advice on cascading select lists. I saw the thread for
"Cascading Select Lists - Not Working" posted by sue and the replies by Varad Acharya, but I'm still
having issues of not seeing the alerts, not able to run the pl/sql process in SQL Workshop, and not
getting the expected results.
I have a list of countries (US - USA, CA - CANADA, etc.) and a list of states for each country. When a
user selects a country I would like to show the list of states within that country.
This is what I've done so far:
Defined an application process:
Process Point: On Demand: Run ... by a page process.
Name: CASCADING_SELECT_LIST1
Process Text:
BEGIN
OWA_UTIL.mime_header ('text/xml', FALSE);
HTP.p ('Cache-Control: no-cache');
HTP.p ('Pragma: no-cache');
OWA_UTIL.http_header_close;
HTP.prn ('<select>');
HTP.prn ('<option value="' || 99 || '">' || '- All States -'
|| '</option>'
FOR c IN (SELECT state_code || ' - ' || state_desc d, state_code r
FROM tbk_state
WHERE country_code = :cascading_selectlist_item_1)
LOOP
HTP.prn ('<option value="' || c.r || '">' || c.d || '</option>');
END LOOP;
HTP.prn ('</select>');
END;
defined and application item:
Name: CASCADING_SELECTLIST_ITEM_1
Build Option: - No Build Option -
Created a 'Form on a table with report' as follows:
Page 5: Report on TBK_HARDWARE_LOCATION
Page 6: Form on TBK_HARDWARE_LOCATION
in HTML Header of the page attributes for 'Form on TBK_HARDWARE_LOCATION' I have:
<script language="JavaScript" type="text/javascript">

</script>
<script>
function get_select_list_xml1(pThis,pSelect){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
alert ('Dept no=' + pThis.value);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
gReturn = get.get('XML');
// gReturn = get.get();
alert('Enames=' + gReturn);
if(gReturn && l_Select){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue)
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);
</script>
On Page 6: 'Form on TBK_HARDWARE_LOCATION' I have the following items (plus some others):
Name: P6_COUNTRY_CODE
Display as: Select List
HTML Form Element Attributes: onchange="get_select_list_xml1(this,'P6_STATE_CODE');"
Source Used: Only when current value in session state is null
Source Type: Database Column
maintain session state: Per session
Source value or expression: COUNTRY_CODE
Named LOV: LIST OF COUNTRIES
Name: P6_STATE_CODE
Display as: Select List
Source Used: Only when current value in session state is null
Source Type: Database Column
maintain session state: Per session
Source value or expression: STATE_CODE
Named LOV: - Select named LOV -
List of Values definition:
     select state_code || ' - ' || state_desc d, state_code r
     from tbk_state
     where country_code = :P6_COUNTRY_CODE
     order by 1
LIST OF COUNTRIES is defined as:
select country_code || ' - ' || country_desc d, country_code r
from tbk_country
order by 1
Now to the problem:
I run page 5 (the report) to see the list of locations and then I try to edit a record (page 6). When I
try to select a different country I get the following error (on IE):
"Problems with this web page might prevent it from being displayed properly or functioning properly.
In the future, you can display this message by double-clicking the warning icon displayed in the status
bar.
Line: 17
Char: 5
Error: Object expected
Code: 0
URL: http//cmrac4.cm.timeinc.com:7777/pls/htmldb/f?
p=114:6:1413254636072443110::::P6_HARDWARE_LOCATION_ID:2
I don't see any of the alert messages.
I also tried to run the application process code in the SQL - Command Processor (I replaced
:cascading_selectlist_item_1 with 'CA' or 'US') and got the following:
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh
button, or try again later.
Only one top level element is allowed in an XML document. Error processing resource
'http://cmrac4.cm.timeinc.com:7777/pls/...
<select><option value="99">- All States -</option><option value="X1">X1 - X1</option><optio...
Can someone help me please?

Varad,
First, thank you for taking the time to try to help me with this problem.
When I view the page's source code (here are the first few lines):
<html lang="en-us">
<head>
<script src="/i/javascript/core.js" type="text/javascript"></script>
<link rel="stylesheet" href="/i/css/core.css" type="text/css" />
<script language="JavaScript" type="text/javascript">

</script>
<script>
function get_select_list_xml1(pThis,pSelect){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
//alert ('Dept no=' + pThis.value);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=CASCADING_SELECT_LIST1',0);
get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
gReturn = get.get('XML');
// gReturn = get.get();
//alert('Enames=' + gReturn);
if(gReturn && l_Select){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue);
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);
</script>
It looks like line 17 is:
var l_Select = html_GetElement(pSelect);
I'm still not sure why I'm getting this error and why it's not working?
Thanks,
Eti

Incoming Email not working for one web app, but IS working for others in same farm.

I have enabled incoming email in a large multi-web application farm running SharePoint 2013 SP1 and the Feb 2015/March 2015 CUs that were pushed down in Windows Updates. It works just fine for two web applications, but it will not work for one particular
web application. I see the email land in the /drop folder. If I remove the email address from the library in http://nonworkingapp web
application and use it on a library in a http://working web application, then the email is processed successfully. Conversely,
if I take an address from a library in http://working and move it to a library inhttp://nonworkingapp it
does not work. I've tried multiple site collections on http://nonworkingapp. This rules out any SMTP issues, etc. and means
the issue is bound to this web application. Permissions are the same between the "non-working" and "working" locations: domain users are members on the site, and the library inherits permissions from the site. The App Pool and Timer
Service accounts have rights to the folder and to the library.
The error in the ULS log is the typical error processing message, but it gives no additional information even though I have enabled Verbose logging.
The Incoming E-Mail service has completed a batch. The elapsed time was 00:00: 00.0156294. The service processed 2 message(s) in total. Errors occurred processing 2 message(s): Message ID: Message
ID:
Typically, you see "alias not found" or some permissions or quota issue here, but this issue is NOT the same as those. In this case NO additional information is provided in ULS.
Edit: running stsadm.exe -o refreshdms -url http://one/failing/site fixed some similar issues where "Unknown alias" was
reported even though the list did have an alias (see here:http://blogs.technet.com/b/vinitt/archive/2009/07/15/e-mail-enabled-list-alias-information-is-not-synchronized-between-configuration-database-and-content-database.aspx).
This did not fix the issue for the case mentioned above.
What could possibly be the issue preventing incoming email from working on this one web application?

Thanks for your reply. Incoming E-Mail was running on all 3 WFE, however I do not think this was the cause. As noted, _other_ emails send to http://workingapp are working just fine. I can send two emails - one to a library on http://workingapp
and another on http://notworkingapp. The email to http://notworkingapp will sit in the drop folder, while the one to http://workingapp will be processed correctly. In addition, the ULS log on WFE1 indicates an attempt to process the file fails.
So clearly, the timer job on WFE1 is running and attempting to process the file. For kicks, I disabled the service on WFE2 and WFE3, but with no change in the behavior.
WRT to #1, I have done this already (as noted in the original post). I can remove an alias from http://workingapp and place it on http://nonworkingapp and it is not processed. If I return it to http://workingapp it is processed. In other
words, I go into Library Settings -> Incoming Email for a working library, and copy the alias, then disable incoming email for that library. I then go to Library Settings -> Incoming Email for a non-working library, enable incoming email, and paste
the alias. Once done, emails sent to the alias are not processed. I then do the reverse, and it works again.
On #2, I have already tried multiple libraries on http://nonworkingapp (also as noted in the original post).
In my environment, incoming email does not work for any library on http://nonworkingapp, but does work for any library on http://workingapp. Troubleshooting listed above has ruled out any problem with basic mail server configuration or library settings
- the problem is bound to http://nonworkingapp
I'm not sure what you mean by "steps to reproduce the issue". If I knew that, I would probably be able to solve the issue. The best I could come up with to describe the situation would be:
Set up SP 2010 in a three-node configuration with multiple web apps
Enable incoming email and confirm it works
Migrate to a SP2013 SP1 farm in a three node configuration.
Enable a new email alias for a library
Observe that it doesn't work for one web application.
Obviously, it's pretty unlikely that attempting that in a lab would actually have the same result.

Filtering not working for newly added child objects in master-detail table

Hi,
I am using Jdeveloper 11.1.1.4 version.
Problem scenario:
Filtering of records is not working for newly created child objects in a master-detail scenario.
Steps to reproduce this issue using HR Schema (using LOCATIONS and DEPARTMENTS table ) :
1. Create Business components (EO's & VO's ) for LOCATIONS & DEPARTMENTS table)
1. Create a .jspx page and insert a readonly master table of Locations
2. Insert a child table (inline-edit table) of Departments and enable filtering
4. For the child table, drag and drop CreateInsert operation as a toolbar button .
5. Create a new child record using the toolbar button and enter data .
6. Filtering on the newly created child record's attributes does not work.
Please note that the same filter works for existing child records.
Any suggestions for resolving this issue?
Thanks,
Vikas

Found from Fusion Developer's Guide the following snippet about QBE functionality :
"+When you create data controls, all data collections will automatically include a Named Criteria node with an All Queriable Attributes criteria. This is the default view criteria that includes all the searchable attributes or columns of the data collection. You cannot edit or modify this view criteria+. "
So, the question is if the implicit view criteria cannot be edited, how else to set the query execution mode to "Both" ?
Shouldn't ADF BC support this by default? Is this a bug?
Note:- If you create a maste-detail table using POJO datacontrols, filter works correctly for newly created child records also .
This seems to be an issue with ADF-BC datacontrols only.
Thanks,
Vikas

Why is the 'Next' button in 508 Screen Reader mode not working for RichTree

Hi ADF Experts,
My JDeveloper version is 11.1.1.8. The 'Next' button in 508 Screen Reader mode for tables works fine.
However, it does not work for trees, I can see only the first 23 or so items.
Any ideas?
What am I missing here?
Regards,
-ab

There is no official JDeveloper version is 11.1.1.8.0!
If you use an internal build ou should post to an internal forum.
If you use an official version please tell us which on.
Timo

Forms Personalization not working after R12 upgrade

Hi,
We have recently upgraded to R12. We have forms personalizations on the People, Enter and Maintain form and this is not working now after the R12 upgrade.
I went to one of the form personalizations and Validated and Applied again but it still did not work. I also created a new one but had no success with that either.
Any ideas how to get this working again ? Is there something extra that needs to be done for R12?
Thanks
Regards,
Shalantha

Pl indicate which version of R12 and on what form you had the personalization in the previous version. Have you checked FND_FORM_CUSTOM_% tables to ensure that the personalization survived the upgrade ?
Pl see if these MOS Docs can help
Forms Personalizations Unavailable After Upgrade To 12.1.x          (Doc ID 1245864.1)
Forms Personalization Not Working After Upgrade To R12.1.3          (Doc ID 1309458.1)
Form Personalization Value Field Not Being Retained After Upgrade          (Doc ID 1266265.1)
Do Personalizations Holdup After A Patch Is Applied? (Doc ID 1286576.1)
HTH
Srini

My database connectivity is not working inspite of installing sql express

My database connectivity is not working inspite of installing sql express ...what should I do so that my database works

Hello karan7,
In addition to pvdg's post, can you reproduce this issue with a new fresh database? If you can this means it is a SQL Setup related problem. If you cannot, your database file may already corrupt.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Database MDS personalization not working for ADF

Similar Messages

Maybe you are looking for