Error in adding selection screen fields

Hi All,,
I am getting error when i add a selection screen parameters in module pool.
I copied stadard program to custom one, when I add an input field to screen it gives information message saying
"Selection screen: Report generation makes screen changes ineffective".
If though if i add the selection screen, when i relogin newly added screeen disappears.
Can any one y this is happening?

Hi,
You can find a lot of posts on the SDN. Please search for them.
[What create docking container on a subscreen?]
[Query Regarding 'cl_gui_docking_container'] are a few

Similar Messages

Adding Selection Screen Fields in IQ09

Hi All,
My requirement is to add a selection screen field on screen of transaction code IQ09. Also , I need to filter records based on the same.
Is this feasible ?
Thanks
Harsh

Hi Harsh,
Please use the Enhancment framework.
Use the Implicit or the Explicit Enhancement Options and then add the Additional Field on the screen.
you can then use the Source code plug-ins to modify the code.
Regards,
Deepak.

Displaying error message while entering selection screen fields

Moderator message: don't offer points
hi experts...
i generated a report.
in that report, the selection screen fields are plant and material type..
now my rqmt is like this :
if user enters any plant except '8210' in the selection screen, then a pop up should appear like.. enter 8210 plant only, and the cursor should remain in the same screen allowing user to enter correct plant.
and then same with the case of material type also..user should enter 'mcfe' material type only..
im using message classes like this:
if so_bwkey-low ne '8210' or so_bwkey-high ne '8210'.
message i000(zts).
endif.
if so_mtart-low is not initial and so_mtart-high is not initial and so_mtart-low ne 'mcfe'
or so_mtart-high ne 'mcfe'.
message i001(zts).
endif.
with this logic, when i enter plant..it is prompting
1) enter plant 8210 only..
and then when i press enter key it is again prompting
2)enter material type mcfe only..
but iam not entering material type here..
i want to get 2nd error message if and only if i enter material type..
help me regarding this issue..
<<text removed>>
thanks in advance,
harini.
Edited by: Matt on Feb 9, 2009 10:14 AM

Hi,
Use Error type message in SELECTION SCREEN EVENT.It will place the cursor in the relevant Field.
At SELECTION-SCREEN ON SO_BWKEY-Low.
if so_bwkey-low ne '8210' .
message E000(zts).
endif.
At SELECTION-SCREEN ON SO_BWKEY-HIGH.
if so_bwkey-high ne '8210'.
message E000(zts).
endif.
At SELECTION-SCREEN ON so_mtart-LOW.
if so_mtart-low is not initial and so_mtart-low ne 'mcfe' .
message E001(zts).
endif.
At SELECTION-SCREEN ON so_mtart-HIGH.
if so_mtart-high is not initial
and so_mtart-high ne 'mcfe'.
message E001(zts).
endif.
This will resolve the issue..
Regards,
Gurpreet

Adding custom text besides selection screen field

Hi All,
I need to add some custom text to the selection screen field "CtegoryID" in the Product search screen(thru the link "Internal Goods")....I sthis possible thru change os some template?If yes,which one??
Regards,
Disha.

Well...
I don't remember an existing search help with some fields using a combo-box.
In the FM assigned to the search help (the search help exit), you can pre and post process some data.
IF callcontrol-step = 'PRESEL', 'SELONE', 'SELECT'.....
But I don't see anything for seach a feature.
In conclusion, I don't think this is supported by generic search help.
Rgds
Christophe
PS: please reward points for helpfull answers

Error message in Selection Screen

Hi
reference no (p_ref) is in my selection screen.
If this field contains special characters (\ / : * ? " |, ) system must prompt error message in selection screen. How to do this. Pls help me
Regards
Anbu

after input form the user
use if condtion
and validate the field and through message.........
Reward IF........
Regards
Anbu
Edited by: Anbu B on Jun 17, 2008 8:04 AM
Edited by: Anbu B on Jun 17, 2008 8:06 AM

How to put Mandatory option for selection screen fields in ABAP Queries

Hi Experts
Can anyone tell me how to put mandatory option for the selection screen fields in ABAP Queries.
Manually I had written code in the At Selection Screen option in infoset to display error message if that field is blank.
But I need to display the selection fields with the tick mark (obligatory mark).
How to do this?
Appropriate answers will be awarded

Hi
For parameter option
parameters : p_kunnr type kna1-kunnr obligatory.
For select option
select-options: s_date for vbak-erdat obligatory.
Plz rewards points ,
Regards ,
Ganesh.

F4 search-help in infoset query selection-screen fields

Hi all,
I created an infoset, and it's corresponding query, and now I need to associate F4 search-help in two of the selection-screen fields. Since they don't have any reference field associated (they are SAP standard table fields), there are no possible values available to select.
How can I do this?
I have already tried to use the "AT SELECTION-SCREEN OUTPUT" in the infoset, but I'm not able to do that. When I try to use the select-options generated by the query (SP$00013 and SP$00014) I have a syntax error with "Field not known".
Can you help me? I never done this before, so I really don't have a guess.
Thanks in advance.
Beste regards,
Sónia Gonçalves

Hi all,
I have found thread that helped me a lot in this issue.
I just have one more doubt: I created the selection criterion and I can already see it in the query selection-screen, but it's appearing in the top of the selection-screen, in a different area called "General data selections".
Isn't it possible to include it in the "Report-specific selctions"?
Thanks in advance.
Best regards,
Sónia Gonçalves

VL10 and new selection-screen fields

Hi experts.
My requirement is to add new selection-screen field to second tab in VL10.
After analyse many topics the solution was to copy VL10 to ZVL10.
Also V50R_USEREXIT_TRANSF was copyed and there was added specific code.
Furthemore note:524424 was implemented (header in form definition in V50R_USEREXIT_TRANSF ), and the SHP_VL10_SELECT_OPTIONS was enhanced. As I understood from this stage we have selection-criteria in repeort.
The problem is that I don't know how to transfer this data to ALV.
Any tips ?
Thanks .
Daniel.

hi
how did you do that. i have to add select options in coois tcode in header and operational level.but only using badi. using screen enhancement it is possible bt how to do that using bagi "workorder_infosystem"..
please help me out..

How to fill internal table with selection screen field.

Hi all,
i am new to sap . pls tell me how to fill internal table with selection screen field.

Hi,
Please see the example below:-
I have used both select-options and parameter on the selection-screen.
Understand the same.
* type declaration
TYPES: BEGIN OF t_matnr,
        matnr TYPE matnr,
       END OF t_matnr,
       BEGIN OF t_vbeln,
         vbeln TYPE vbeln,
       END OF t_vbeln.
* internal table declaration
DATA : it_mara TYPE STANDARD TABLE OF t_matnr,
       it_vbeln TYPE STANDARD TABLE OF t_vbeln.
* workarea declaration
DATA : wa_mara TYPE t_matnr,
       wa_vbeln TYPE t_vbeln.
* selection-screen field
SELECTION-SCREEN: BEGIN OF BLOCK b1.
PARAMETERS : p_matnr TYPE matnr.
SELECT-OPTIONS : s_vbeln FOR wa_vbeln-vbeln.
SELECTION-SCREEN: END OF BLOCK b1.
START-OF-SELECTION.
* I am adding parameter value to my internal table
wa_mara-matnr = p_matnr.
APPEND wa_mara TO it_mara.
* I am adding select-options value to an internal table
LOOP AT s_vbeln.
    wa_vbeln-vbeln = s_vbeln-low.
    APPEND wa_vbeln TO it_vbeln.
ENDLOOP.
Regards,
Ankur Parab

Error while adding a custom field with Input help via AET

Hi All,
I need to add two custom field under Service orders at Item level in component BT140I_SRVP.
One field is required to have the input search help f4 and autopopulates the second field
I am able to add one field(not requiring help) successfully through AET .
I have created one Zsearch_help in se11 and its successfully running and Autopopulating seocnd field while I am testing it
While adding second field through AET,I need to enter following details as -
field label,search relevant ,serach help etc.
When I type the name of my 'Zsearch_help' against field search help it gives me following error
'Search help is not compatible'.
Secondly,not getting getter and setter methods for the attrributes in BTAdminI.
Last,please tell me if i create zhelp and activate it,would it automatically appear in the list on AETwhile assiging it to input field?
Please help me out.Kindly be detailed as I am new to SAP CRM.
Thanks,
Shivani

The question is answered in CRM 7.0 forum:
Getting error while adding a custom field (with input help) through AET

Truncation of selection screen field in reports

Hi,
Is there any way to avoid truncation of selection screen fields in ABAP reports? For eg, I declare:
SELECT-OPTIONS: s_test FOR ztest-test_field NO INTERVALS
The length of this field in the table is 30 chars. However, on displaying the field via selection screen, this gets truncated to around 18 or so. How do I avoid this as I need to display the full length of the field?

Hi,
Try this
Tables : makt.
select-options maknr for makt-maktx.
now go to the screen painter of your program in change mode and move the Help buttons first to the Right each. now increasethe length of the Matnr Field length so that they are equal to 40 Char. in your program you have handle the length now if you want to restrict to 18 otherwise it will be ok
if they don't fit you need incease the Size of the Screen Visible area both in the Screen Painter as well as in the
Screen Attributes
You also get an Information Message just ignore that.
Just open your program in SE80 if you can't go to the screen painter in SE38. the other way just keep this program in Display mode and execute then take F1 help , take Technical Information and double click on the Screen number now go to the Screen Layout and go to Change mode here.
Regards,
Shirisha

Regarding Search help on selection-screen field

Hi there,
I am working on custom tables.
I have a requirement to maintain search pattern on a selection-screen field.
selection-screen parameter: p_name which is company name filed from Z table.
By giving a string like Holl* and by pressing F4 on the field p_name it has to popup a dialogbox having list of company names starting with Holl.
Thanks in advance.
-Tulasi

Hi
Go through the link given below :
How to create a search help for my own fields in selection screen
F4 search help on report selection screen
also try :
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'VKORG'
PVALKEY = ' '
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'P_VKORG'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'C'
TABLES
VALUE_TAB = T_TABLE1
FIELD_TAB = field_tab
RETURN_TAB = RET_TAB
DYNPFLD_MAPPING = DYN_TAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
With Regards
Nikunj shah

Selection screen field problem

Hello experts..
i have a selection screen , in that i have a field   s_bwart for mseg-bwart.
some times the user will input the data in the field and sometimes he wont. we have fixed movement types combination like
11-21 , 13-24 , 13-56 , 101-543 , 101-544 etc.
if the user did not input any thing in the selection screen , i am populating s_bwart in at-selection screen event with all the mvt types. after executing the report when user presses the back button to come to the selection screen, there the s_bwart field is containing all the mvt types in single values ie in the select options screen. So the user dont want that, if he comes back nothing should be there in the selection screen field s_bwart if he has not inputted anything. if he inputs only 11 mvt type then when he comes back after executing the report he should see only 11 in the select screen field ie s_bwart. Please send the replies on how to solve the problem.

hi,
in ur program try to display values for users in START-OF-SELECTION event as it triggers after the selection screen displayed for users. if user doesn't give any input then display default values in this event. and also create a variable
for ex:
data: ws_flag type c,
         p_value type i.
after u display default values for users in selection screen assign the flag as ' X '
ws_flag = 'X'.
before leaving ur program based on flag try to do like this.
if ws_flag = ' X '.
    clear s_data. // s_data is the select options for u.
else.
     s_data = p_value. // the value which user gave in selection screen as i/p.
endif.
if helpful reward some points.
with regards,
Suresh Aluri.

Regarding Selection-Screen Field Display

Hi All,
I have issues with Selection-Screen field display.
The Actual issue is i had declared a selection screen field as: s_exgen FOR embk-exgen.
EMBK-EXGEN is actually 20 Char length field.
But in output display it is being shown as 18 Char field though i can type in all 20 characters.
But display restricted to 18 Characters only.
Can anybody give me the solution for the same!
Thanks in advance.
Thanks & Regards,
Prasad.

Hi,
You can decrease the visible length of the field but you can not increase more than database field length. check SAP help on this :
select-options: s_exgen FOR embk-exgen VISIBLE LENGTH 5.
... VISIBLE LENGTH vlen
Effect
This addition allows you to shorten the visible length of the corresponding screen field on the selection screen to vlen.
Variant 2
SELECT-OPTIONS sel FOR (f).
Additions as in variant 1.
Effect
In this variant, (f) must be a field containing the name of the actual reference field at runtime. The system creates the LOW and HIGH fields as character fields with length 45. However, their appearance on the selection screen is inherited from the reference field whose name is contained in field f at runtime.
Regards
Appana

Selection screen fields

Hi,
I want to group the selection screen fields. where should i group.
I want to group using the modif Id
T Y P E S
TYPES:
BEGIN OF TYVBAK,
VBELN TYPE VBAK-VBELN,
AUART TYPE VBAK-AUART,
AUDAT TYPE VBAK-AUDAT,
KUNNR TYPE VBAK-KUNNR,
NETWR TYPE VBAK-NETWR,
END OF TYVBAK.
D A T A      D E C L A R A T I O N S
DATA:
STVBAK TYPE TYVBAK,
ITVBAK TYPE TABLE OF TYVBAK.
S E L E C T I O N    S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS:
SKUNNR FOR STVBAK-KUNNR.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS:
SVBELN FOR STVBAK-VBELN,
SAUDAT FOR STVBAK-AUDAT.
SELECTION-SCREEN END OF BLOCK B2.
I N I T I A L I Z A T I O N
*INITIALIZATION.
FILLING SELECT OPTIONS WITH DEFAULTS
SKUNNR-SIGN = 'I'.
SKUNNR-OPTION = 'BT'.
SKUNNR-LOW    = '1'.
SKUNNR-HIGH   = '4000000'.
APPEND SKUNNR.
T O P   O F P A G E
TOP-OF-PAGE.
WRITE:/1'SALES DOC',12 'DOC TYPE',20 'SALES DATE',32 'NETWORTH',60 'CUSTOMER'.
*A T   S E L E C T I O N    S C R E E N    O U T P U T .
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SCREEN-NAME = 'SVBELN-LOW'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
IF SCREEN-NAME = 'SVBELN-HIGH'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
where should i group SBVELN and SAUDAT

Hi
Instead of SCREEN-NAME use SCREEN-GROUP1 and for your select options give MODIF ID.
As follows
SELECTION-OPTIONS: selcrt for dobj MODIF ID MOD1.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
CHECK SCREEN-GROUP1 = 'MOD1.
SCREEN-REQUIRED = 1.
MODIFY SCREEN.
ENDLOOP.
This is COZ when you use select-options you get TWO fileds on the INPUT screen LOW and HIGH so you have to check for selcrit-low and selctri-high you can avoid all this my assigning a MODIF ID.
See this sample programs for this
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: pa_file TYPE rlgrap-filename MODIF ID abc,
pa_lifnr TYPE lfa1-lifnr MODIF ID abc,
pa_vkorg TYPE vbak-vkorg MODIF ID abc.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: pa_kunnr TYPE vbak-kunnr MODIF ID def.
SELECT-OPTIONS: s_lifnr FOR gs_lfa1-lifnr MODIF ID def,
s_date FOR gs_lfa1-erdat MODIF ID def,
s_augru FOR gs_vbak-augru MODIF ID def,
s_vbeln FOR gs_vbak-vbeln MODIF ID def.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pa_upd RADIOBUTTON GROUP g1 USER-COMMAND uc01 DEFAULT 'X'."#EC *
SELECTION-SCREEN COMMENT 3(60) text-004 FOR FIELD pa_upd.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pa_rep RADIOBUTTON GROUP g1 ."#EC *
SELECTION-SCREEN COMMENT 3(60) text-005 FOR FIELD pa_rep.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b3.
IF pa_rep EQ gc_x.
LOOP AT SCREEN.
IF screen-group1 = gc_abc.
screen-input = gc_zero_num.
ELSEIF screen-group1 = gc_def.
screen-active = gc_one_num.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSEIF pa_upd EQ gc_x.
*For Reprocessing
LOOP AT SCREEN.
IF screen-group1 = gc_def.
screen-input = gc_zero_num.
ELSEIF screen-group1 = gc_abc.
screen-active = gc_one_num.
ENDIF.
MODIFY SCREEN.
CLEAR pa_upd.
ENDLOOP.
ENDIF.
REPORT zrich_001.
PARAMETERS: p_rad1 RADIOBUTTON GROUP grp1 DEFAULT 'X'
user-command chk,
p_rad2 RADIOBUTTON GROUP grp1.
SELECT-OPTIONS: s_datum1 FOR sy-datum MODIF ID d1,
s_datum2 FOR sy-datum MODIF ID d2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF p_rad1 = 'X'
AND screen-group1 = 'D2'.
screen-active = '0'.
ENDIF.
IF p_rad2 = 'X'
AND screen-group1 = 'D1'.
screen-active = '0'.
ENDIF.
MODIFY SCREEN.
ENDLOOP

Error in adding selection screen fields

Similar Messages

Maybe you are looking for