Error while accesing ABAP web dynpro application

Hi Experts,
We are getting warning symbol on web page status bar, when we are accessing the ABAP web dynpro application
only first page of application is getting loaded and when we click on page it is showing error on status bar and we can perform any thing.
once we double click on warning icon,
below details are coming:
Line: 1491
Char: 3
Error: Object Expected
Code: 0
URL: url of the ABAP web dynpro application
This scenario is occuring for many ABAP WD application for a client.
Please guide how to solve this issue?
Thanks!
Piyush

Hi
First try a very simple application with nothing in it just one text saying Hello World
Run it and see what happens.
Also check if your url uses FQDN name. something like https:
company.name.co:50000\.......
If you do not use the FQDN it will always show a script error on the bottom and some functions will not work e.g
dropdowns.
regards
Yuval.

Similar Messages

HTTP 500 internal server error while starting abap web dynpro application

Hi there,
i have some problems concerning my web dynpro abap configurations in the system. When i start an application the browser appears and displays the http 500 internal server error. The required icf nodes are activated, as far as i know. the following properties are set:
hostname: aet
port: 8000
The generated url for the web dynpro application looks as follows:
http://aet.ls3001:8000/sap/bc/webdynpro/sap/zwdr_test?sap-language=EN
Maybe anybody of you out there has an idea for that situation.
Thanks for your afford and kind regards,
Albert

Hi Ulli,
the error message says:
UNKNOWN HOST
Description: Unable to locate the server named "aet.ls3001" --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no longer exists. Double-check the name and try again.
So the problem is the hostname.
When i replace the hostname with the ip of the server, the following error occures:
COULD NOT CONNECT
Description: Could not connect to the server "10.18.187.9".
But with SAPLogon, its possible to connect on the server by filling in the ip adress.
Kind regards,
Albert

I am getting a error while executing the Web Dynpro Application Page.

Hi All,
I am getting a Error while executing a web dynpro application :::
: Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered. Component: Z_WEP_PERSONAL_DATA, View: OVERVIEW, Window: Z_XXP_PERSONAL_DATA
I have checked this error description in ST22 :
What happened?
    The exception 'CX_WDR_RT_EXCEPTION' was raised, but it was not caught anywhere
     along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
     'CL_WDR_CLIENT_APPLICATION=====CP' has to be
    terminated.
Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_WDR_RT_EXCEPTION', was not caught
     and
    therefore caused a runtime error.
    The reason for the exception is:
    Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered. Component:
    Z_XXP_PERSONAL_DATA, View: OVERVIEW, Window: Z_XXP_PERSONAL_DATA
Can u plz help me regarding this error.
Thanks,
Deepika

>Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered
Looks to me like you are trying to fire a navigation plug within WDDOMODIFYVIEW. According to the rules of the WD Phase Model this is not allowed.

Error while deploying the Web Dynpro application

HI All,
I have developed a Web dynpro application. Now when I am deploying the application I am getting an error.
Description
Jan 8, 2008 2:14:12 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[002]Deployment aborted
Deployment exception : Cannot determine sdm host (is empty). Please configure your engine/sdm correctly !
Can any one please help me regarding this.
Regards
Neha

Hi Neha,
It seems that there is problem with your SDM server. It seems that during J2EE engine configuration SDM server is not configured. Actually this configuration is done by Basis Team.
By the way try out your Server setting:
Go To:: Windows -> Preferences -> SAP J2EE Engine
[Mention the required details over there]
And Check whether you are getting Active SDM Server under J2EE Engine.
Regards,
Nittin Garg

500 internal server error while deploying a Web Dynpro application

Hi
I got the 500 internal server error while deploying the application to server.
I tried to find the log file at usr --> SAP --> SID --> JC XX --> j2EE --> Cluster --> Server 0 --> log, but no log was there.
There were structure changes in the RFC and also code change in my Web
Dynpro code.
I´m working on EP 7.
NWDS version is 7.0.1
Please help me as the production move is pending because of this.
Regards
Vineet Vikram

Hi
Restarting the server does not help in my case.
I tried it several times.
I'm getting following error message in NWA>
Originated from: com.sapmarkets.bam.logcontroller.InvalidLogQuerySessionException: Invalid or expired log query session "1"
at com.sapmarkets.bam.logcontroller.jmx.LogControllerFacade.closeLogQuerySession(LogControllerFacade.java:356)
at sun.reflect.NativeMethodAccessorImpl.invoke0
Can you pl help on this.
Regards
Vineet Vikram

Error While Deploying A Web Dynpro Appln thru NWDS

HI,
I am getting an error while deploying a Web Dynpro Application through NWDS.Following is the Exception
Aborted: development component '<ComponentName>'/'local'/'LOKAL'/'0.2006.07.26.15.06.05':Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [sapsbx28] with user name: [J2EE_ADMIN] Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Cannot authenticate the user.] (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
When i give a request for deployment it asks for the SDM password. I enter a valid SDM pwd. If i enter a invalid SDM pwd i get some other exception. So the pwd SDM entered by me is correct.
can any one help me in solving this
regards
Nilesh Taunk

Hi Nilesh,
Try opening Visual Admin if your not able to login with username(administrator) and password. Problem with NWD2004s do the following steps.
C:\usr\sap\J2E\JC01\j2ee\configtool->configtool.bat->open it
1. Click on Secure store
2. Right you will find :
admin/password/J2E->retype your admin passowrd which you gave during installation=>SAVE properly
Restart the server and try login visual admin
Deploy now...Other wise see this thread same error solved:
Re: An Deploy Problem about Credentials.
Regards
Suresh

ABAP Web Dynpro Application changes in Administation Mode no longer working

Hi Gurus,
To apply customizing to a standard SAP Web Dynpro application we used to simply run the application in administration mode. After we changed a parameter to allow for theme application this adminstration mode no longer works. Right-Click simply acts as if you are running the application normally. We have tried to remove our parameter but this had no effect.
How can we "fix" this error without creating a new custom configuration which will cause the URL to change?
Thanks,
Garth

Hi,
how did you open in administrative mode?
to open in adminstrative mode do as follows:
In se80 ,i.e in the menu bar:
Web Dynpro Application->Test->Test in Administation mode.
i hope u can see the option "Settings for surrent config" .
you can refer the thread.
[Re: ABAP Web Dynpro Application changes in Administation mode]
Priya.

Can the role info be passed from portal to ABAP web dynpro application

Hi,
We have some roles in the portal. We call the ABAP web dynpro applications from the portal. Is it possible to pass on the role from the portal to the Web dynpro ABAP application so that we can use this role information in the application.
Thanks,
Pooja

Hi,
you can try to add the expression
role=<IView.PCDUnit>
as part of the Application Parameters in the iView. This will be the role in 99%. However not all iViews started in the Portal must belong to a role. You can start iViews using page navigation that are not part of a role. Therefore the PCD does not talk about roles but about "units" which is the superordinate term.
the value will be the PCD path of the role - e.g:
portal_content/myFolder/roles/myRole

Calling an interface METHOD of another abap web dynpro application

Hi Experts,
Can u plz tell how we can Call an interface METHOD of another abap web dynpro application in main WD Component.
Thanks
Mahesh

Hi ,,
   Example ALV interface method calling   GET_MODEL interface method
   View attribute   declaration   :    M_WD_ALV type      IWCI_SALV_WD_TABLE
     DATA lo_INTERFACECONTROLLER TYPE REF TO IWCI_SALV_WD_TABLE .
      wd_this->M_WD_ALV =   wd_this->wd_cpifc_alv( ).   "ALV is the usage name
     DATA lv_value TYPE ref to cl_salv_wd_config_table.
      lv_value = wd_this->M_WD_ALV->get_model( ).   " interface method calling in ALV component usage.....
Regards,
Devi

Call a ABAP Web-Dynpro-application via a BSP-Application

We have a BSP-Framework, that call several applications among other things other BSP-Applications, ITS-Application and other systems. Now I want to integrate a ABAP Web Dynpro-Application.
For the moment I can call the ABAP Web Dynpro-Application from our application.
This application runs in the same session as the Framework (verify in transaction sm04).
When I want to call another application in the Framework, the session will be killed (no more sessions in sm04). This happens also, when I want to call the ABAP Web Dynpro-Application a second time.
I guess, that the ABAP-Framework thinks I want to go outside the system (for example www.google.de) and close the session. I found out, that this wouldn't happen, if the application were suspended. But I found no way to tell the application via a url-parameter to suspend.
Can someone help me?

Thx for the tip,
but I can't firea suspend plug. Because I'm in BSP. I understand the docu so, that you have the option to call a other apllication like BSP from a ABAP Web Dynpro.
I want to call the ABAP Web Dynpro form BSP like this way.
1. Start BSP-Framework
2. Call ABAP Web-Dynpro-Application from BSP
3. Call another Application from BSP without automatically logout by unload ABAP Web Dynpro. (I have a chance to call the ABAP Web Dynpro again via url to suspend before I call the other app.)
Regards Stefanie

Exiting from ABAP Web Dynpro application

Hi,
In ESS portal we have one tab Personal info, there I have created one link and integrated my ABAP web dynpro application.
I want to exit from the application and go back to the Personal info sub area. created one exit button in my application on press of that i need take this action.
Please guide me with this
Thanks!
Piyush

Piyush,
I am not sure whether it works or not just get the navigation url of personalinfo subarea and using portal APIs navigate to that url when you click on exit button
Thanks
Bala Duvvuri

Using IGS in Abap web dynpro application

Hi ,
I would like to develop an Abap web dynpro application with complex graphs.
There is an installation of IGS services.
In the layout screen I see only graphic basic options.
In thr internet I saw much more options in the graphic label. ( WD applic-> view-> layout ).
Does anyone know how to add this options to the view layout?
Thenks,

עיחיחןלכלןעל

ABAP Web Dynpro: Application Configuration vs Admin Personalization problem

Hi,
I created an application configuration for the application MT_ORDER_APP with a component configuration on RPLM_MT_ORDER_COMP. I changed several Labels and UI Element visibility... and saved.
When I test this application config for viewing an order of type ZX99, I don't see my changes. If I right-click on the page, I see that the configuration Id used is MT_ORDER_ZX99.
Why my Z config is overrided by this one???
By testing in Admin mode, I discovered that I can personalize this MT_ORDER_ZX99 Config.... But then, the changes are visible to all users viewing ZX99 type orders.
How to manage to make my Application Config highest in priority?

Hi,
how did you open in administrative mode?
to open in adminstrative mode do as follows:
In se80 ,i.e in the menu bar:
Web Dynpro Application->Test->Test in Administation mode.
i hope u can see the option "Settings for surrent config" .
you can refer the thread.
[Re: ABAP Web Dynpro Application changes in Administation mode]
Priya.

ABAP Web Dynpro application in new UWL tab

Hi All,
I have been looking for an option to open a web dynrpo abap application in a new tab in UWL which i created. I have been searching on SDN for this but i could only find the help docs which say how to open a task in web dynrpo abap application.
But in my case i want to open a web dynpro abap application on click of a new tab in UWL. The WD ABAP application doesn't have any workflow task.
Also is it possible to restrict the tabs which user see based on their roles ?
please help me on this.
Thanks
Hussain

Hi,
how did you open in administrative mode?
to open in adminstrative mode do as follows:
In se80 ,i.e in the menu bar:
Web Dynpro Application->Test->Test in Administation mode.
i hope u can see the option "Settings for surrent config" .
you can refer the thread.
[Re: ABAP Web Dynpro Application changes in Administation mode]
Priya.

How to display the error message during the web dynpro application runtime

hi,
    I'm a java developer,During i 'deploy and run ' a web dynpro application on server-1,if the application have some runtime errors. there are displayed many infomation about the runtime error,such as exception track,etc.
    But when i do the same on server-2,there just show something like:
            500   Internal Server Error
                                SAP NetWeaver Application Server 7.00/Java AS 7.00
            Failed to process request. Please contact your system administrator.
but the server-1 will stop the j2ee engine.
how can do i make server-2 show detail error message as server-1. when i debug web dynpro application need these infomation.
Appreciate your inputs...
(Note:server-1 and server-2 have same software version)
Edited by: BingLin Zhong on Feb 18, 2008 2:13 AM

The Sap-Notes 962319:
1. Check in the Visual Administrator, "Licensing Adapter" -> "General" -> "SystemType" !
If it is set to "DEVELOPMENT_MODE", verbose error messages are shown.
If it is undefined, proceed with the next step.
If it is set to something else, only exception IDs are shown. In this case the only chance is to search for this exception ID in the default traces.
2. If the system type is undefined, then in the Config Tool "Configurations" -> "webdynpro" -> "sap.com" -> "tcwddispwda" -> "Propertysheet default" -> "DevelopmentMode" is evaluated. If it is "true", verbose error messages are shown.
3. If verbose error messages are required but still the short version is shown, you probably face an error message that is not raised by Web Dynpro but by other components of the NetWeaver. In the Visual Administrator set "Properties" -> "HTTP Provider" -> "DetailedErrorResponse" to "true".
4. In addition to the error page shown in the browser or client, important messages - including error messages and stack traces - are written to the log and trace files, e.g. to the default traces usr\sap\<SID>\<instance>\j2ee\cluster\server<number>\log\defaulttrace.trc.<number>.
a) In some cases, when an exception ID is included in the error message, the detailed error message can easily be retrieved in the log file.
b) When no exception ID is given, you have to search for the detailed error message in the log specifying time stamp and/or user ID.
Always consider restarting the system after making changes on the settings.
It is not recommended to switch the "SystemType" to an inappropriate value just for viewing verbose error messages. The system type potentially affects framework, applications and licensing in an perhaps unintended way.
In the past there was no distinction between different system types regarding error messages. For security reasons this distiction has been introduced. It is not intended to show stack traces in non-development systems in the future. SAP does not provide workarounds or patches to enable such a behaviour again.

Error while accesing ABAP web dynpro application

Similar Messages

Maybe you are looking for