Error while processing the dimension

Multiple Specification of the Name 'HIR' as a Component Name (Component 6)
this is the error i am geting while processing the dimension

Hi,
Do you get this error while processing all the dimension or only in specific dimension?
Do you have hierarchies in this dimension? Have you added the hierarchy in the property (you should not).

Similar Messages

Error: var g_objCurrentFormData_Error : There has been an error while processing the form

Hi,.
I have a InfoPath 2010 form which was published to SharePoint 2010. I migrated the content db to SQL Server 2012 and I have converted the Sharepoint 2010 (windows based) to the SharePoint 2013 claims based site. I have not fully upgraded the site to
2013 version (Version upgrade to SP 2013) is not done..
In the InfoPath 2010 form, which is available in SP 2013. I have a button and on click of it, i have the below code:
XPathNavigator domNav = MainDataSource.CreateNavigator();
XPathNavigator fldUserurl = domNav.SelectSingleNode("/my:myFields/my:TaskUrl", this.NamespaceManager);
if (!string.IsNullOrEmpty(fldUserurl.Value))
string urlToDecode = HttpUtility.UrlDecode(fldUserurl .Value);
HttpContext.Current.Response.Write("<script type='text/javascript'>window.open('" + urlToDecode + "','_self','left=20,top=20,width=500,height=500,toolbar=1,resizable=0');</script>");
HttpContext.Current.Response.Flush();
HttpContext.Current.Response.End();
The above code works fine in SharePoint 2010, however after moving the Site to SP 2013 Claims mode, I am getting the error as
"var g_objCurrentFormData_Error = [[[12,"There has been an error while processing the form.","","","guid"]],[],0,"","",1033,"","",["0","","","","","",0,0,"",0,false],"","0",false,"",0,"","http:\u002f\u002ftest-t1.com\u002fs\u002fTestApplication","ltr","http:\u002f\u002ftest-t1.com\u002fs\u002fTestApplication",6.35202885373882E+17"
In the SP Logs, i found the below:
Unhandled exception processing request for PostbackPage Microsoft.Office.InfoPath.Server.Util.InfoPathFatalException: Exception of type 'Microsoft.Office.InfoPath.Server.Util.InfoPathFatalException' was thrown.
at Microsoft.Office.InfoPath.Server.Util.GlobalStorage.get_CurrentFormId()
at Microsoft.Office.InfoPath.Server.Util.GlobalStorage.get_CurrentContext()
How to fix this?
Thanks

Hi Venkatzeus,
please let us know your sharepoint 2013 latest cumulative update, if possible please make sure it is March 2013 update or above.
as i know, between 2010 infopath and 2013 there are difference, perhaps if you can debug your form it may help.
most probably there are environment settings difference between 2010 sharepoint and 2013 sharepoint. such as the data connection size/length, that causing it failed, or the form data is NULL.
http://infopathdebugger.codeplex.com/
http://www.infopathdev.com/forums/t/26330.aspx
http://social.technet.microsoft.com/Forums/en-US/5c9d2fce-0fd8-439c-a636-bf856eb76e15/how-to-retrieve-term-store-management-values?forum=sharepointgeneralprevious
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

InfoPath form, rich text fields, "There was a form postback error" InvalidOperationException, There has been an error while processing the form

Using InfoPath 2013 browser enabled form.
I am getting the above error on ALL Infopath Designed Rich Text fields, where the "Cannot be blank" attribute is set.
To reproduce it, I create a custom list and custom list form with InfoPath 2013. I add 2 Rich Text fields and enable "cannot be blank". To raise the error, I put some data in the RT field. Skip to another field (so focus is changed and a postback
occurs), then back to original field to delete the contents (to raise the validation).
I originally thought it was associated with the HTMLCHKR.DLL not being registered (and I have re-registered it just in case), but the exception I get from the ULS logs reads (it is from a list AFTER I have re-registered the DLL):
There was a form postback error. (User: 0#.w|myDomain\jc, Form Name: Template, IP: , Request: h t t p ://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/Item/newifs.aspx?List=2212ff41-77b4-445b-931b-d7e538c9da91&Source=h t t p://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/AllItems.aspx&RootFolder=&Web=3db49106-bdca-47bb-b4cd-a549d2d86aa7,
Form ID: urn:schemas-microsoft-com:office:infopath:list:-AutoGen-2015-01-16T21:51:48:853Z, Type: InvalidOperationException, Exception Message: No content generated as the result of the operation.) 8cc5e09c-3665-903b-575a-faaac506c40a
I noticed that errors associated with the HTMLCHKR.DLL not being registered would have some sort of COM exception (example: TYPE_E_LIBNOTREGISTERED or REGDB_E_CLASSNOTREG)
I also should mention that this problem started happening about 3 weeks ago. We have extended the web application to handle HTTPS on the intranet zone (we had a reverse proxy project that did not eventuate) - would that cause something? How can I do further
checking?

Hi,
I have done a test in my SharePoint, and I met the same issue with you.
I created a custom list and custom list form with InfoPath 2013. I added 2 Rich Text fields and enabled "cannot be blank". I put some content in the RT field, then delete the contents, I got the error message:"there has been an
error while processing the form."
Here is a similar post said that executing the command: regsvr32 "C:\Program Files\Common Files\Microsoft Shared\
OFFICE14\htmlchkr.dll" will solve the issue.
https://social.msdn.microsoft.com/Forums/en-US/eb2e0f6e-c8e4-4e92-ac5e-a09d72759eda/rich-text-field-error-in-webform?forum=sharepointcustomizationprevious
But I just disabled "cannot be blank", and it solved the issue.
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Error While processing an Dimension

Hi Experts,
while processing an Dimension i am getting an error while processing, but in the BW it is showing 2 Dimension.
How to check which is the Latest/ Right one.
Kindly Help
Best Regards,
Bhupendra Arya

Hi,
You can find the details of diemnsions and its infoobject technical name in the table UJA_DIMENSION.
The filed TECH_NAME holds the infoobject technical name in BW for a particular dimension in BPC.
Hope this helps.
Regards,
Balraj.

Error While processing the COBRA qualified Life event

Hi All,
We have setup the Termination Life event as a COBRA qualifying life event.
Also setup the a new monthly payroll as the default payroll and set the benefit assignment to Yes at BG level.
I created an employee on 18 aug 2010 , processed new hire life event and enrolled that employee into the COBRA plan named "Be well Medical Plan".
Then When I terminated the employee as on 18oct2010, While Processing The Termination life event, I am getting an Error saying “When determining pay periods, a payroll Id is required. This error has occurred in the following package : ben_distribute_rates.get_periods_between. "
When I searched for this error in metalink ,it says it does not have a payroll id ,but when I check on 19oct2010 using the People->Total Comp Participation->Person Benefits Assignment window, he has got the default payroll attached to his benefits assignment.
Could you please help me to reslove this issue?
Your help is greatly appreciated.
Thank you,
Anuradha

Hi Anuradha,
This error comes in many scenarios and there are bug fixes also for them. Please check on all patches available for you apps patchset level having the file benelmen.pkb. You may find a fix for it. (This was a common issue sometime back with suspended/terminated assignments) Also, I suggest logging a SR with oracle asap if your terminated assignment and also the benefits assignment have the correct payrolls attached.
Regards,
Vinayaka

Error while processing the contract

Hi,
While processing the contracrt am getting the error as below:
Partner Purch. Org. Auth. For Release not found
Pls let me knw how to resolve it.
Thanks,
Venky

pls let me know are you creating local contract/GOA.
Make sure you use the local purc org for operational contracts in SAP SRM
Regards,
Manu

Error in process the Dimension

Hi Friends
We have a domain installtion of the BPC 7.0 MS Version.
Now whenever we are trying to process any dimension with the option "PROCESS MEMBER FROM THE MEMBER SHEET" the following error is coming " There's no data in the mbr table to validate and process"
and when we are trying to process the dimension without checking the option " PROCESS MEMBER FROM THE MEMBER SHEET" the following errir is coming " ActiveX component can't create objectObject variable or With block variable not set"
Can you please how to solve the above issue
Regards
krish

Hi,
This is happening because the following prerequisite software is not installed:
Microsoft SQL Server 2005 Backward Compatibility Components Solution
You can download it from
http://www.microsoft.com/downloads/en/confirmation.aspx?familyId=228de03f-3b5a-428a-923f-58a033d316e1&displayLang=en
Hope it helps.

How to capture the errors, while processing the transformations

Hi,
i need to capture all errors, this includes invalid SQL text, short dumps related to SQL exaction etc.., while processing transformation.
I need to write code to fill error handling structures like(monitor table).
It sholud dynamically update the all errors to Monitor table, while processing the Transforamtions.
Please advice how to do this.
Thanks & Regards
MRK

Hi Rajani,
the code goes some this like this
     RESULT = SOURCE_FIELDS-TXTMD5.
     TRANSLATE RESULT TO UPPER CASE .
     CONDENSE RESULT NO-GAPS .
     READ TABLE I_SECTOR INTO I_SECTOR WITH KEY
                               PRODUCT = SOURCE_FIELDS-/BIC/Z_IPROD
                               ISTATATTR = RESULT .
     IF SY-SUBRC NE 0 .
      MONITOR_REC-MSGID = 'ZMESSAGE'.
      MONITOR_REC-MSGTY = 'E'.
      MONITOR_REC-MSGNO = '001'.
      MONITOR_REC-MSGV1 = 'ERROR, SECTOR'.
      MONITOR_REC-MSGV2 = SOURCE_FIELDS-TXTMD5 .
      MONITOR_REC-MSGV3 = SOURCE_FIELDS-/BIC/Z_IPROD.
      APPEND MONITOR_REC TO MONITOR.
     RAISE EXCEPTION TYPE CX_RSROUT_ABORT.
     ENDIF.
for this you need to create message class called ZMESSAGE in SE91 tcode
Hope this helps
PV

Error while processing a dimension

Hi,
While processing my Time dimension, am gettin the error ""Object reference not set to an instance of an object"
and "Exception of type System.exception is thrown" .
Kindly let me know if anyone has any suggestions/solution
Thanks,
Raj

Hi,
I'm getting this too, except it's happening for about half of the dimensions in ApShell. It's a brand new install.
BPC7.5 for MS (SP5)
Windows Server 2008R2 64-bit
SQL 2008R2
Office 2007 SP2
I'm trying the initial 'Process Dimension' step for the ApShell application set.
Some of the dimensions (C_ACCT, C_Category, C_DataSrc, Entity) process fine, but others (Category, P_Activity, P_ACCT) fail with the error "Object reference not set to an instance of an object."
The full error from the log is:
{System.NullReferenceException: Object reference not set to an instance of an object.
at Osoft.Services.Platform.YukonAdmin.Olap9Manager.AddTableToAppDef(Collection colCube, DataSourceView& oDefView, String strDimName, String strDimType, DataTable oTable, String strCommand, Int32 intMaxHier, String& strMsg, Boolean bOnlySharedDim)}
Any ideas?
I'm new to BPC, can someone tell me if it's right that I only see these dimensions in the cube?
Groups
IntCo
C_Category
C_DataSrc
Entity
C_ACCT
O_ACCT
FLOW
Or should I be seeing all the dimensions I see in the admin console?

Error while process the CPPR-Rfx "No receiver could be determined"

Hi Experts,
We are working on SRM 7.0 Extended Classic Scenario, While testing the CPPR-Rfx process we are getting the error msg in Portal
"No receiver could be determined".
We implemented Badi ME_REQ_SOURCING_CUST & BBP_EBPXML_OUT_BADI
We are getting this ERROR " No receiver could be determined" While clicking the "CREATE RFX" with reference to Purchase Requisition through Hormonized roles.
Pl suggest what could be the problem.
Regards,
Mohan

Check if below settinjgs are in place:
Parameter CV_EXT_RFX_IND is set to true in ME_REQ_SOURCING_CUST to create RFX.
Business functions are activated in backend ECC system.
In backend system Event type linkage is activated for receiver WS53800009, event RFXREQUESTED and BO BUS2105
In Backend system Activate outbound messages for events RFCREQUESTED for object type BUS2105.
RFC user used in PI system is assigned to Purch org in SRM org structure.
Maintain the service call RFQRequestSUITERequest_In in XI/PI.
Maintain transac type for RFx in SRM.
Do you see any entries in XI monitor and queues?
Thanks,
Jagadish

No approval workflow found error while processing the Bid Invitation

We are working on SRM 5.0 (SP level6). We are able to create the bid invitations successfully from the sourcing cockpit. However while saving the changes in the bid invitations, system shows the error "No approval workflow found". When checked in SWB_PROCUREMENT , no workflow exists for object" BUS2200, Bid Invitation EC"in the standard SRM.
Kindly confirm what is missing...
NNK

Hi Nitin,
Use T-code OOCU - Task custamising overview. Then SRM-EBP --> SRM-EBP-WFL then active event linking.
Please activate WS145000026 for automatic approval of bid. or WS145000027 for one step approval of bid invitation.
This will help to solve your problem. IF not please reply me the error.
Regards
Apparao.

Error while loading the dimension through ODI

Hi ALl,
Here iam facing the different error,actually , i migrated all the cubes from dev server to integration server,and again i loaded and saved my rulefiles wen i loaded dimension its loading perfetly , so wen we arre loading the dimension through ODI package , but its all are fine for dev server we are getting the problem::::
"Cannot build dimension. Analytic Server Error(1007083): Dimension build failed. There are many possible causes (for example, problem allocating memory). Check the server log file and the dimension build error file to locate the error that caused the failure..""
then i tried in essbase , now its giving error cannot open object in the arbor path .otn file
its not opening the .otn file, can any one help , it would be appriciated..
Thanks

The .otn file is created when essbase is restructuring and once completed renamed to otl, if it does not complete it can leave the .otn file.
You should be able to delete the otn (maybe stop the application first) and open the outline.
I would also check the logs generated from ODI and also the essbase app logs to troubleshoot the issue.
Cheers
John
http://john-goodwin.blogspot.com/

Essbase error while builting the DimEnsion

Hi All
Wen Iam builting the Dimension ,its giving error but im doing th exact mapping and records also uniq but im not getting y it is giving error like
\\Record #196 - Member required for alias P-R61030 (3311)
     P-R61030     P-R61030 - Rents Saving (DC)
\\Record #196 - Child Member P-R61030 - Rents Saving (DC) with no parent (3331)
     P-R61030     P-R61030 - Rents Saving (DC)
\\Record #198 - Member required for alias P-R61040 (3311)
     P-R61040     P-R61040 - Other Saving (DC)
\\Record #198 - Child Member P-R61040 - Other Saving (DC) with no parent (3331)
     P-R61040     P-R61040 - Other Saving (DC)
Thanks
RamNandu

You need to find out which of your assumptions is wrong. The error file is showing up for a reason. Determine the reason. Most likely not because of the phase of the moon.
Isolate those records. Why would Essbase "think" that there is no parent?
If this is a sql build, isolate your sql statement to just those records that are failing, look at them in EAS. Look at them in a sql query tool. See what is happening.

Error while processing the payment

Hi experts,
The user attempts to perform the payment, but the following error is appearing: "Item cannot be paid due to inconsistent withholding tax information" (message FZ550).
What may be the reason?
Regards,
Fernando Peixoto Araújo

Hi
This error happens because the with holding tax information on your open items is different from what is maintained on vendor master. You can use program RFWT0010 to correct such documents with the relevant with holding tax information updation
Thanks & Regards
Sanil Bhandari

Error while processing ENTITY dimension

Hi Experts,
I am on BPC 7.5NW version.
I have 6 hierarchies defined for ENTITY dimension.
I have created the structure in an excel and now I am coping it into Entity dimension for each column one by one.
I copied ID, Description and PARENTH1 in ENTITY dimension and processed it. It worked fine.
When I copied PARENTH2 from excel to ENTITY dimension and tried to process it, it gave me following errors -
Base member 'INDIAREG' cannot be the parent of 'UBCITY' in PARENTH1
Base member 'BURUKWS' cannot be the parent of 'MUKSA' in PARENTH1
Could you please let me know how to resolve the issue?
Regards,
RashmiG

Hi Nilanjan,
Below is the Entity structure -
*ID     EVDESCRIPTION     PARENTH1     PARENTH2     PARENTH3     PARENTH4     PARENTH5     PARENTH6     CURRENCY*
INDIATTOT     India Retail     ROWTTOT
INDIAREG     India Regular     INDIATTOT     M_MNREGROWIND     M_ROWMNREGIND     COUNTRYROWMN     STAT_REGIONALROWMN
EMPORIOMALL     Emporio Mall     INDIAREG                              INR
TAJKRISHNA     Taj Krishna     INDIAREG                              INR
PALLADIUM     Palladium     INDIAREG                              INR
UBCITY     UB City     INDIAREG                              INR
BUREUROPWS     Burberry Europe Wholesale     L5WHOLE                              GBP
BURUKWS     Burberry Int Wholesale (Rollup)     BUREUROPWS          M_REGIONALWHINT                    GBP
MUKDIS     International Wholesale     BURUKWS                              GBP
MUKEUR     UK Europe Wholesale     BURUKWS                              GBP
MUKDFS     Duty Free Wholesale     BURUKWS                              GBP
MUKEM     Emerging Markets Wholesale     BURUKWS                              GBP
MUKSA     South America Wholesale     BURUKWS                              GBP
Any suggestion?
Regards,
Rashmi

Error while processing the dimension

Similar Messages

Maybe you are looking for