Errors/warnings occurred when generating the local proxy dll and VI wrappers for web service

Hello,
I'm new to web services - trying to import a WSDL that was created by an outside vendor and placed on a company server. I imported a previous version successfully. The error I'm getting doesn't make a lot of sense to me, here it is:
The following errors/warnings occurred when generating the local proxy dll and VI wrappers for this web service.
Can't generate files.
Possible reasons are:
1. The output file(s) might be read-only.
Remove the read-only attribute and import the Web service again.
2. A proxy DLL that LabVIEW created under the same file path exists in memory.
Restart LabVIEW and import the Web service again.
I don't see any read-only attributes on the output files and I've tried restarting LabVIEW - no luck. Any help is greatly appreciated.
Thanks,
Al Rauch
Merck & Co., Inc.

Aaron,
I was able to successfully import and run the web services from the WSDL file in question in LV2009 on a different computer than the one on which I had the original problem. Unfortunately I am still having the original problem on the project computer and will need to get it working there . . . still looking for a solution to that. Apparently LV2009 is perfectly capable of importing and running this WSDL file, but there is something still in the way on the project PC.
Thanks,
Al

Similar Messages

Error 7 occurred when generating the data transfer program

Hello All ,
In Master Data Load Process Chain , we get error like
1. System Response
Caller 09 contains an error message.
Diagnosis
Error 7 occurred when generating the data transfer program for the requested InfoSource.
System Response
The data transfer is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
Note : We faced this issue for two days now . Just repeating the load make it success .
If any one faced and fixed this issue . Please let me know .
Thanks in advance .

Hi,
. Initially goto transaction SE38, Run the program RSDS_DATASOURCE_ACTIVATE_ALL. Give your Datasource name, and source system and check the check box for "Only Inactive objects".
This will actiavate the given datasource.
2. Replicate the datasource in RSA1.
3. Try to schedule the infopackage for the datasource which you have activated now.
4. IF infopackage runs through, Repeat the process for all datasources ie uncheck the check box, which means it will activate all datasources for the source system.
Also make sure that there will be enough Back Ground Processor available....
Reduce the parallel process
Thanks
BVR

Error in restore backup BPC 10 ( An error has occurred when generating user security settings)

Hi
restoring error - An error has occurred when generating user security settings
JPCHAPARRO is SAP ALL
UJBR >> Execute Restore >> Background
SM37 >> Execute
Jobs Summary >> BPC_BACKUP_PLSOLLA >> SPOOL
Error restore
security loading data ended in error.
An error has occurred when generating user security settings
SGL1
We found a note, but it appli to a previous version to which it is has
1643183 - BUI Roles are not created when copy environment
Best Regards
Juan Pablo

Hi Ridwansyah
Thanks for de reply!!!
Yes, restore the environment on the same system (SBW), but in new environment Backup à (PLSOLLA) Restore à (PLSOLLA_NIIF)
in ST22 shows the same error that is attached to in the original message
security loading data ended in error.
An error has occurred when generating user security settings
Yes, the user JPCHAPARRO this within a team assigned to a task profile.
another test
was conducted environment backup and ENVIRONMENTSHELL I restore in a new environment. This process went successful.
Best Regards
Juan Pablo

'Error 8 occurred when starting the data extraction program'

Hello Experts,
I am trying to pull master data (Full upload) for a attribute. I am getting an error on BW side i.e. 'The error occurred in Service API .'
So I checked in Source system and found that the an IDOC processing failure has occurred. The failure shows 'Error 8 occurred when starting the data extraction program'.
But when I check the extractor through RSA3, it looks fine.
Can someone inform what might be the reason of the failure for IDOC processing and how can this be avoided in future. Because the same problem kept occurring later as well.
Thanks
Regards,
KP

Hi,
Chk the idocs from SM58 of source system are processing fine into ur target system(BI system)...?
Chk thru Sm58 and give all * and target destination as ur BI system and execute and chk any entries pending there?
rgds,
Edited by: Krishna Rao on May 6, 2009 3:22 PM

Error: Internal Erorr when generating the history. Use a different view.

Hello,
When I am trying to open an workbook in BEX. I get the message: Internal Error when generating the history. Use a different view. (production system)
How can I solve this problem? And what could be the reason? In our Development and QAS everything is OK!
Regards,
Boyke

hi
If nobody have change or write access in prod, then
ensure that everything is OK in QAS,
Execute the workbook and views in QAS.
If it works fine there, some thing is missing in the transported objects.
Ensure everything is transported correctly
Thanks
N Ganesh

An error occurred when invoking the authorization extension. (rsAuthorizationExtensionError)

Hello,
I'm not sure when (I suspect SQL 2012 SP1 CU3 and Windows Updates) reporting stopped working.
In Internet Explorer I have error:
An error occurred when invoking the authorization extension. (rsAuthorizationExtensionError)
Get
Online Help
For more information about this error navigate to the report server on the local server machine, or enable remote errors
In MSSRS logs lot of:
library!ReportServer_0-1!15f4!03/31/2015-00:00:42:: i INFO: Call to ListChildrenAction(/, False).
library!ReportServer_0-1!15f4!03/31/2015-00:00:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AuthorizationExtensionException: , Microsoft.ReportingServices.Diagnostics.Utilities.AuthorizationExtensionException: An error occurred
when invoking the authorization extension. ---> System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: The type initializer for 'Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccess' threw an exception. (Fault Detail is
equal to An ExceptionDetail, likely created by IncludeExceptionDetailInFaults=true, whose value is:
System.TypeInitializationException: The type initializer for 'Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccess' threw an exception. ----> System.Exception: Exception decrypting. The specified file could not be decrypted
at Microsoft.EnterpriseManagement.Security.DPAPIWrapper.Decrypt(Byte[] cipherText)
at Microsoft.EnterpriseManagement.Security.AsymmetricKeyManager.Initialize(Byte[] publicKey)
at Microsoft.EnterpriseManagement.Security.SecureStorageManager.Initialize()
at Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccess.get_secureStorageDatabaseManager()
at Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccess..cctor()
--- End of inner ExceptionDetail stack trace ---
at Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccess..ctor()
at CreateMicrosoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccessBackCompatProxy()
at Syst...).
--- End of inner exception stack trace ---;
MSSRS version is
Microsoft SQL Server Reporting Services Version 2011.0110.5058.00.
I tried to delete all encrypted content, restart SQL and Reporting few times, install last Windows Update updates and don't have idea what to do more.
SQL and MSSRS services are working on domain accounts, nothing changes.

Hi LukaszH,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Error loading C;\users\Toshiba\appData\Local\SMBDP.dll

Can anyone help me?
After i start up i keep getting a message that says error loading C;\users\Toshiba\appData\Local\SMBDP.dll and then the module could not be found.
I have tried everything but cannot get rid of it,
i have asked for help online but it tells me to purchase a Tune-up utilities, but i already have Tune-up untilities and have run it through completely but it still does'nt work,
please help.

I don't believe this error message has anything to do with Toshiba applications you got preinstalled with your laptop so it is not easy to identify which application want to have access to this data.
Is anything else written in this error message?

Error when creating SharePoint WebPart - "An error occurred while generating the project"

I am getting a Error in Visual Studio when I create a SharePoint Web Part.. "An error occurred while generating the project. Please see the Visual Studio Output window for more information."
I have checked the Output window and there is noting in it. When I click OK I get the next error that states "Object reference not set to an instance of an object".
After I click oky.. There seems to be files missing in the project menu..
I am using Visual Studio 2013 Ultimate and SharePoint 2013 Enterprise. These run on Windows Server 2012 R2..
This mind boggling.. Hope someone can help me..
Thanks

Hi,
For better troubleshooting, I suggest you do as the followings:
Create a new clean project. In this projcect, you can just create a new web part to check whehter it works.
Debug the project step by step and try to find which object reference not set to an instance of an object.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Errors occured when compile the bpel process

Errors occurred when compile the bpel process using bpel designer for Eclipse:
(com.oracle.bpel.designer_0.9.13)
using PM: bpel_jboss_101200
More error infomation following:
Buildfile: E:\OraBpelDEclipse3.2\workspace\AboutTest\build.xml
main:
[bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: Invalid expression statement.
[bpelc] retun true;
[bpelc] ^
[bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: ';' expected.
[bpelc] retun true;
[bpelc] ^
[bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:208: Method setPartneLinkBinding(com.collaxa.cube.rm.suitcase.PartnerLinkBindingDescriptor) not found in class com.collaxa.cube.engine.types.bpel.CXPartnerLink.
[bpelc] __pl.setPartneLinkBinding(getProcessDescriptor().getPartnerLinkBindings().getPartnerLinkBinding(__pl.getName()));
[bpelc] ^
[bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:584: Undefined variable: __ctx
[bpelc] __setOutgoingLinks(__sc, __ctx);
[bpelc] ^
[bpelc] 4 errors
BUILD FAILED
E:\OraBpelDEclipse3.2\workspace\AboutTest\build.xml:28: ORABPEL-01005
Error in java files auto-generated when compiling ,why?
Thanks!

when compiled again without any change, the same errors like above are not occurs
more info.
Buildfile: E:\OraBpelDEclipse3.2\workspace\AboutTest\build.xml
main:
BUILD SUCCESSFUL
Total time: 9 seconds
BUT, some errors occurs in BPEL PM server and in Console the process is not available
more Info: Because I using Chinese version,some chinese Info occurs in the error infomation ,so i have translated some character into English.
process "AboutTest" (version "1.0") compiled sucessfully
15:49:15,718 INFO [STDOUT] <2007-05-11 15:49:15,718> <INFO> <default.collaxa.cu
be.engine.deployment> process "AboutTest" (version "1.0") loaded sucessfully.
16:25:25,265 INFO [STDOUT] <2007-05-11 16:25:25,250> <INFO> <default.collaxa.cu
be.compiler> validating "E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0.jar\
AboutTest.bpel" ...
16:25:35,015 INFO [STDOUT] E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0
.jar\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: Invalid expression statement.
16:25:35,015 INFO [STDOUT] retun true;
16:25:35,015 INFO [STDOUT] ^
16:25:35,031 INFO [STDOUT] E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0
.jar\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: ';' expected.
16:25:35,031 INFO [STDOUT] retun true;
16:25:35,031 INFO [STDOUT] ^
16:25:35,859 INFO [STDOUT] E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0
.jar\BPEL-INF\src\bpel\p0\BPEL_BIN.java:208: Method setPartneLinkBinding(com.col
laxa.cube.rm.suitcase.PartnerLinkBindingDescriptor) not found in class com.colla
xa.cube.engine.types.bpel.CXPartnerLink.
16:25:35,859 INFO [STDOUT] __pl.setPartneLinkBinding(getProcessDescript
or().getPartnerLinkBindings().getPartnerLinkBinding(__pl.getName()));
16:25:35,859 INFO [STDOUT] ^
16:25:35,859 INFO [STDOUT] E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0
.jar\BPEL-INF\src\bpel\p0\BPEL_BIN.java:584: Undefined variable: __ctx
16:25:35,859 INFO [STDOUT] __setOutgoingLinks(__sc, __ctx);
16:25:35,859 INFO [STDOUT] ^
16:25:35,859 INFO [STDOUT] 4 errors
16:25:36,343 INFO [STDOUT] <2007-05-11 16:25:36,312> <ERROR> <default.collaxa.c
ube.engine.deployment> <CubeProcessFactory::generateProcessClass>
process "AboutTest" (version "1.0") compiled failed.
16:25:36,359 INFO [STDOUT] <2007-05-11 16:25:36,359> <ERROR> <default.collaxa.c
ube.engine.deployment> <CubeProcessLoader::create> can not compile the class .
can not compile the bpel class generated from "AboutTest".
16:25:36,375 INFO [STDOUT] <2007-05-11 16:25:36,375> <ERROR> <default.collaxa.c
ube.engine.deployment> process "AboutTest" (version "1.0") loaded failed!!
16:25:37,281 INFO [STDOUT] <2007-05-11 16:25:37,265> <ERROR> <default.collaxa.c
ube> <BaseCubeSessionBean::logError>
if you have installed patched in server, please check whether the proriety "bpelcClasspath" contained the patch class.
16:25:37,343 INFO [STDOUT] at com.collaxa.cube.engine.deployment.CubeProces
sHolder.bind(CubeProcessHolder.java:1257)
16:25:37,343 INFO [STDOUT] at com.collaxa.cube.engine.deployment.CubeProces
sHolder.loadAndBind(CubeProcessHolder.java:870)
16:25:37,421 INFO [STDOUT] at com.collaxa.cube.engine.deployment.CubeProces
sHolder.loadArchive(CubeProcessHolder.java:812)
16:25:37,421 INFO [STDOUT] at com.collaxa.cube.engine.CubeEngine.loadProces
sArchive(CubeEngine.java:985)
16:25:37,421 INFO [STDOUT] at com.collaxa.cube.ejb.impl.BPELDomainManagerBe
an.loadProcessArchive(BPELDomainManagerBean.java:390)
16:25:37,421 INFO [STDOUT] at sun.reflect.NativeMethodAccessorImpl.invoke0(
Native Method)
16:25:37,421 INFO [STDOUT] at sun.reflect.NativeMethodAccessorImpl.invoke(N
ativeMethodAccessorImpl.java:39)
16:25:37,421 INFO [STDOUT] at sun.reflect.DelegatingMethodAccessorImpl.invo
ke(DelegatingMethodAccessorImpl.java:25)
16:25:37,421 INFO [STDOUT] at java.lang.reflect.Method.invoke(Method.java:3
24)
16:25:37,421 INFO [STDOUT] at org.jboss.ejb.StatelessSessionContainer$Conta
inerInterceptor.invoke(StatelessSessionContainer.java:683)
16:25:37,421 INFO [STDOUT] at org.jboss.resource.connectionmanager.CachedCo
nnectionInterceptor.invoke(CachedConnectionInterceptor.java:186)
16:25:37,421 INFO [STDOUT] at org.jboss.ejb.plugins.StatelessSessionInstanc
eInterceptor.invoke(StatelessSessionInstanceInterceptor.java:72)
16:25:37,421 INFO [STDOUT] at org.jboss.ejb.plugins.AbstractTxInterceptor.i
nvokeNext(AbstractTxInterceptor.java:84)
16:25:37,421 INFO [STDOUT] at org.jboss.ejb.plugins.TxInterceptorCMT.runWit
hTransactions(TxInterceptorCMT.java:282)
16:25:37,421 INFO [STDOUT] at org.jboss.ejb.plugins.TxInterceptorCMT.invoke
(TxInterceptorCMT.java:148)
16:25:37,437 INFO [STDOUT] at org.jboss.ejb.plugins.SecurityInterceptor.inv
oke(SecurityInterceptor.java:111)
16:25:37,437 INFO [STDOUT] at org.jboss.ejb.plugins.LogInterceptor.invoke(L
ogInterceptor.java:191)
16:25:37,437 INFO [STDOUT] at org.jboss.ejb.plugins.ProxyFactoryFinderInter
ceptor.invoke(ProxyFactoryFinderInterceptor.java:122)
16:25:37,437 INFO [STDOUT] at org.jboss.ejb.StatelessSessionContainer.inter
nalInvoke(StatelessSessionContainer.java:331)
16:25:37,437 INFO [STDOUT] at org.jboss.ejb.Container.invoke(Container.java
:709)
16:25:37,437 INFO [STDOUT] at sun.reflect.GeneratedMethodAccessor81.invoke(
Unknown Source)
16:25:37,437 INFO [STDOUT] at sun.reflect.DelegatingMethodAccessorImpl.invo
ke(DelegatingMethodAccessorImpl.java:25)
16:25:37,437 INFO [STDOUT] at java.lang.reflect.Method.invoke(Method.java:3
24)
16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.ReflectedDispatcher.dispa
tch(ReflectedDispatcher.java:60)
16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.Invocation.dispatch(Invoc
ation.java:62)
16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.Invocation.dispatch(Invoc
ation.java:54)
16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.Invocation.invoke(Invocat
ion.java:82)
16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.AbstractMBeanInvoker.invo
ke(AbstractMBeanInvoker.java:197)
16:25:37,453 INFO [STDOUT] at org.jboss.mx.server.MBeanServerImpl.invoke(MB
eanServerImpl.java:473)
16:25:37,453 INFO [STDOUT] at org.jboss.invocation.local.LocalInvoker.invok
e(LocalInvoker.java:97)
16:25:37,453 INFO [STDOUT] at org.jboss.invocation.InvokerInterceptor.invok
e(InvokerInterceptor.java:90)
16:25:37,453 INFO [STDOUT] at org.jboss.proxy.TransactionInterceptor.invoke
(TransactionInterceptor.java:46)
16:25:37,453 INFO [STDOUT] at org.jboss.proxy.SecurityInterceptor.invoke(Se
curityInterceptor.java:55)
16:25:37,453 INFO [STDOUT] at org.jboss.proxy.ejb.StatelessSessionIntercept
or.invoke(StatelessSessionInterceptor.java:100)
16:25:37,453 INFO [STDOUT] at org.jboss.proxy.ClientContainer.invoke(Client
Container.java:85)
16:25:37,453 INFO [STDOUT] at $Proxy146.loadProcessArchive(Unknown Source)
16:25:37,453 INFO [STDOUT] at com.collaxa.cube.engine.deployment.CubeProces
sMonitorWork.run(CubeProcessMonitorWork.java:129)
16:25:37,453 INFO [STDOUT] at oracle.tip.adapter.fw.jca.work.WorkerJob.go(W
orkerJob.java:51)
16:25:37,453 INFO [STDOUT] at oracle.tip.adapter.fw.common.ThreadPool.run(T
hreadPool.java:267)
16:25:37,453 INFO [STDOUT] at java.lang.Thread.run(Thread.java:534)
16:25:37,453 INFO [STDOUT] <2007-05-11 16:25:37,453> <ERROR> <default.collaxa.c
ube.engine.deployment> <CubeProcessMonitorWork::run> Error while loading process
archive E:\OraBPELPM\domains\default\deploy\bpel_AboutTest_1.0.jar
why?
thanks

Windows App Certification Kit 3.4 error occurred while generating the report (the application will exit)

Hi all,
I've encounter a pretty big issue while trying to check if everything with my windows phone 8.1 app is all right. After creating package (*.appx) I launched Windows App Certification Kit 3.4 to run it against all the test. Each time I try I get an error saying
"an error occurred while generating the report. the application will exit" and Certification tool just crushes
I looked online for some solutions but couldn't find any. Somebody knows what is going on and how to fix it ?
Can't insert images into post because of not verified account so imgur:
http://imgur.com/ptT0cU3

Try sending it to store anyway… I have the similar issue, the kit hangs when saving result and never complete it.
Another member has same question.
https://social.technet.microsoft.com/Forums/en-US/11910167-75e1-47d8-a0fb-fb8046c57f89/windows-app-certification-kit-31-reports-failure-due-to-crash-or-hang?forum=projectsiena.
If you want to test your app, you can also send to beta store and you can get response from the testers.

Error when generating the report (see long text), Message no. AQ_AD_HOC221

Hi All,
I am facing a peculiar problem while executing an infoset query.I have created 2 customized fields Compa-ratio and PIR in infotype 0008 in an infoset.I have coded in these additional fields.
When I execute a query using 1 of these customized fields the report is generated correctly.But when I put both the fields in the output the report shows an error "Error when generating the report (see long text)". The message# associated with this errAQ_AD_HOC221.
I have also checked the data types and the references. Nothing seems to be wrong here.
Does anybody has any clue about this ?
Kajal

Hi Bernd,
I had a look at those notes. But the information provided did'nt prove to be helpful. I found out the problem. I was using the same local variable for both the fields in their code. This generated the error. This error is a very generic one and does'nt help in finding out what exactly is the problem.
I changed the other local variable and it started working. When I was using the same variable that time I did'nt forget to clear the values but the query still generated the error.
Anyways thanks a lot for the reply.
Kajal

An Active Directory error 0x51 occurred when trying to check the suitability of server

We have several exchange administrators and two exchange 2010 servers and one exchange 2007 server. I am getting the following error message
when opening up Exchange Management Console on one of the exchange 2010 server.
"An Active Directory error 0x51 occurred when trying to check the suitability of server 'dc101.domain.local'. Error: 'Active directory
response: The LDAP server is unavailable.'
dc101 does not exist anymore. I tried changing the Configuration Domain Controller by manually specify a domain controller but get the exact
same error message and also gets an empty list when selecting the domain. Other administrators who logs into to the same server do not get this error message.
If I open the exchange management console on another exchange server, it works without problem. Is there a setting somewhere I need to change
to point it to the correct domain controller using power shell?

I fixed it for myself.
Organization Configuration->Modify Configuration Domain Controller->select Use a default domain controller

Error when Generating the Program

Recently there was an SP upgrade and my Planning Book started giving me this error message (SCM version =5.0 and SP = 7)
"Error when generating the program" Message no. /SAPAPO/TSM141
Diagnosis: Generated programs are programs that are generated based on individual data objects, such as planning object structure, planning areas and Infocubes. These programs are then executed in the transaction. An error occured during the generation of such a program
Possible causes:
1. The template has been corrupted
2. The object that the template uses to generate the program contains inconsistencies; for instance an Infocube has not been activated
This error occurs when I try to open the my planning book/creating the selection profile. I've re-activated the Infocube and later deactivate and active my POS and tried to do the same for the Planning Area....but the error still persists. I tried to create a new planning area and tried it again but the error still persists. I've tried to fix any inconsistencies in the planning area time series objects by running the consistency check....however the same error pops up during the consistency check....
Anyone encountered this error message and any possible solutions to this issue.
Thanks
Surender

I did find an ABAP Dump when looking at ST22. The short message is as follows:
Runtime Errors         GEN_BRANCHOFFSET_LIMIT_REACHED
Date and Time          05/14/2007 19:33:54
Short text
     Jump distance is too large and cannot be generated.
What happened?
     A jump distance is too large and cannot be generated.
     A control structure or a routine with "CHECK" or "EXIT" contains
     too many ABAP statements.
     Error in the ABAP Application Program
     The current ABAP program "GP_MET_PSTRU_BASIC_FORMS" had to be terminate
      because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     During the generation of program "GP_MET_PSTRU_BASIC_FORMS", the system
      determined that
     within an ABAP event a control structure (for example, IF..ENDIF
     or LOOP..ENDLOOP) or a routine (for example, FORM routine) has
     become too large. The resulting jump distance is too large so that
    it could no longer be generated.
    With the internal load format, the jump distance must not be
    greater than 32768 (this is the size of approximately 10.000
    ABAP statements).
    The jump distance that is to be generated, however, is 50885.
How to correct the error
   The ABAP application program must be changed.

"An error occurred while creating the system proxy" after upgrade to 11.2

Hi, I have just moved from 11.1 release to 11.2 release but this fault is preventing me from using 11.2
If i try to access System Administration Panels like "Users" or "SMF Services" I get two error messages and can not proceed.
If I roll back to the previous BE, (11.1) it all works fine).
An error occurred while creating the system proxy
Navigation Failed. The first component of the address, "vp" is not a valid control.
The error is mentioned here https://www.mail-archive.com/[email protected]/msg09791.html but I can not see the link content and it was a long time ago.
Not sure if it is relevant, but i am behing a pfsense/squid proxy - but have this server IP excluded/set to bypass the proxy.
Also, not sure if it is relevant but here is the output from the following:
nas@nas:~$ svcprop svc:/application/pkg/system-repository:default | grep _proxy
config/http_proxy astring ""
config/https_proxy astring ""
Any help appreciated.

Ensure that the "solaris-desktop" package group is correctly installed :
# pkg info solaris-desktop
# for i in `pkg contents -m solaris-desktop | grep depend | awk '{print $2}' | awk -F= '{print $2}'`; do pkg list $i; done
Ensure that svc:/system/rad:local is online :
# svcs svc:/system/rad:local
Check for any errors in rad service :
# svcs -Lv svc:/system/rad:local
Once the above is checked, does the error persists after a reboot ?

Adding Engine component causes: "Compiler errors occurred when generating a Windows Forms wrapper..."

I got this error when I tried to drop a TestStand Engine class onto my main form in VisualStudio.NET.
Compiler errors occurred when generating a Windows Forms wrapper for ActiveX control 'AxNationalInstruments.TestStand.Interop.API'
The error message went on to say that it saved the source in ./obj/AxInterop.TS.cs so I added that to the project. When I try to build it, I get this error:
The designer must create an instance of type 'System.Windows.Forms.AxHost' but it cannot because the type is declared as abstract.
I am using TestStand 3.0 evaluation, Version 7.1.3088 of Microsoft Development Environment 2003, and .NET Framework 1.1 Version 1.1.4322 SP1.
Is this aximp.exe problem?
Can someone suggest how to fix this?
Thanks,
Jeff

TestStand installs pre-built interop wrappers for the TestStand engine and all the TestStand UserInterface controls. You can find them in \API\DotNet\Assemblies\CurrentVersion\.
However, the best thing to do is usually to add the ApplicationMgr control to your .NET form and then call form.axApplicationMgr1.GetEngine() to get the engine. Doing this automatically adds references to the interop assemblies to your project. You can find this control in the TestStand tab of your .NET toolbox when you have a form active.
Ideally, you should start with the .NET simple operator interface examples which are in \OperatorInterfaces\NI\Simple\CSharp\ and \OperatorInterfaces\NI\Simple\VB.Net\
- James

Errors/warnings occurred when generating the local proxy dll and VI wrappers for web service

Similar Messages

Maybe you are looking for