Geographical Map does not show up in Crystal Reports 2008 Viewer

Hi,
I'm facing a problem by creating maps with CR2008 SP2. If I export the report directly to an pdf or html file the map is shown properly. If I'm using the CR 2008 Viewer to open the .rtp file there's an error message like 'not supported object: geographical map'.
Anyone else facing such problems?
Thanks for help,
Carsten

Hi,
Welcome to MSDN.
I am afraid that this issue is related to third-party, and it is not supported in these forums.
You could consider posting this issue in website of the publisher of that tool： http://scn.sap.com/community/crystal-reports.
Thanks for your understanding.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • Blackberry maps does not show map just a location

    Blackberry maps does not show map just a location on att with 10.0.10.822 os and software 10.0.10.116
    http://forums.crackberry.com/blackberry-z10-f254/blackberry-maps-not-working-818297/
    Solved!
    Go to Solution.

    Nope, I don't know the seekrit release dates
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Named Criteria created, but it does not show up in the Data Controls view

    Hello there,
    I wish to use a data-bound ADF Mobile ListView in one of the pages on the app. However, only entries of the underlying data that fulfill a certain condition shall be displayed in the list. The condition basically is an "Equals" test against a bind variable in the pageFlowScope. Therefore, I have created a corresponding Named Criteria for the data control - proceeded like described here:
    https://blogs.oracle.com/adf/entry/create_named_criteria_in_ejb
    The Named Criteria, in my case, has been created and saved, yet it does not show up in the Data Controls view of JDeveloper. Therefore, I cannot drag it on a UI element to use it.
    I only have the "Operations" folder where the quick guide above also shows a "Named Criteria" folder.
    Refreshing or restarting JDeveloper did not solve this.

    It was all taken care of by Gaurav Aggarwal
    He got me all fixed up, Thank you for your concern.
    Daniel Walters

  • Service map does not show up in MSS

    in MSS, when clicking on Team, the "service map" iview does not show up. In PCD, the service map shows up in yellow and when clicking on it, the following error message is displayed:
    "Linked object not available - portal_content/com.sap.pct/every_user/com.sap.pct.erp.common.bp_folder/com.sap.pct.erp.common.iviews/com.sap.pct.erp.common.servicemap"

    Thanks for the pointer...I found this link that explains it.
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/2f/d7844205625551e10000000a1550b0/frameset.htm
    I will give it a try
    Tiberiu

  • Map does not show in Map Module

    I'm using Lightroom 5.4 on a Max 10.9.3. The map does not display in the Map Module. All I get is a blank screen. At on point I briefly saw the message the Map is Offline, with a map of the world, but then it said Map was Online and all I have is the blank screen. Can you help, please?

    Do you have Lightroom installed on a case-senstive partition?  See here for more details and troubleshooting:
    Map module is white | Mac OS

  • Copy does not show File 2 metadata in Nikon View NX

    A picture opened in Photoshop CS4 11.0.1 and saved as a copy jpeg (after color correction) when opened in Nikon View NX 1.5.2 does not show the
    metadata with shutter speed, lens aperture, etc. However, that same picture shows the original info in Photoshop (File info > camera data). I wrote Nikon and they claimed Photoshop and other third part apps "ruin the shooting data." Opinions? Suggestions? Thanks
    Macbook Pro 2.16gHz OSX10.5.6 gRAID 2TB.

    Well the problem is that, in Windows, the menu bar is owned by the application. When you view the PDF in the browser, the browser owns the menu bar and chooses what to show. Hence it shows only the browser items and not the Reader menus. If you view it outside the browser, Reader is running stand-alone and shows it's menu items.
    I think, all you can do is show make sure the button bars you want are exposed by default.

  • InsertRow does not show the inserted row on the view

    hello:
    The code below works well and shows the row on the view when added. However, when there are several existing rows and I have to scroll to next pages. an insert button on that page does not show the new Row at all. Is there a way for me to see the row even if I scroll over to the last page and try an insert?
    ViewObject myVO = this.getMyView();
    Row newRow = myVO.createRow();
    newRow.setAttribute("Id", myId);
    myO.insertRow(newRow);
    Thanks

    Hi,
    I also have problems with code above for inserting a new row.
    When I insert a new row in a table and click on column header (to change sorting), that row (and any other new row before committing) disappears from table. And if I commit that table (without missing row), the missing row reappears with next refresh.
    Selection in that table (using SelectOne component with Autosubmit=true) also doesn't work with new rows (with existing rows it works fine). Selection allways sticks on first inserted row!
    Something weird is happening here...
    Please help.

  • Barcode not displaying/printing in Crystal Report java viewer

    We have written a Crystal report (in Developer XI release 2 with service pack 4 installed) which produces barcode labels.  The barcodes are Code 39 barcodes and are generated by printing the string \*data_field\* in a Code 39 barcode font.  The asterisk is the character used for the Code 39 start/stop sequence in the barcode font.
    In Developer everything works fine and prints out and scans correctly. When we make the report available to our end users in the Crystal Reports java viewer all we get where the barcode should appear is white space on screen or when we print.  (The rest of the report behaves correctly). 
    We have tried a few things and have found that if both asterisks or the starting or ending asterisk is left in a different font (i.e. not the barcode font) then the rest of the string displays and prints in the barcode font.  (unfortunately without bot asterisks you don't get a scanable barcode).
    Has anyone got any suggestions on how to fix this?
    (In case it might be relevant the barcode font we are using is this one: http://www.barcodesinc.com/free-barcode-font/)
    Thanks
    Trevor

    Hello Ludek,
                    I have found that the issue is caused by the bold attributes of my field.
                    You can try the following and you should encounter the same issue:
                                    - Create a Report
                                    - Create a formula with many characters
                                    - Put you field in Times New Roman bold 8.
                    The following Font Size in  Times New Roman are in issue: 5 u2013 8 u2013 11- 14
                    The following Font Size in  Arial are in issue: 8 u2013 11 u2013 12 u2013 14
    Thank you.
    Charles
    Edited by: Charles Gagnon on May 2, 2011 5:38 PM

  • Export from Crystal Reports 2008 viewer fails if run on separate thread

    I have a windows desktop application written in Visual Basic using Visual Studio 2008.  I have installed and am trying Crystal Reports 2008 to run a report.  Everything seems to work well except that when I preview a report (using the viewer control) and click the export button found in the upper left corner of that control, I get the following message:
    Error 5: Current thread must be set to single thread apartment (STA) mode before OLE calls can be made.  Ensure that your Main function has STAThreadAttribute marked on it.  This exception is only raised if a debugger is attached to the process.
    I am a little confused on what to do exactly.  Is the problem because I am running in the Visual Studio 2008 IDE?  It says this exception is only raise if a debugger is attached to the process.  No, I tried running it outside the IDE.  The exception wasn't generated but the application hung when the button was clicked.
    It says the current thread must be set to single thread apartment (STA) mode.  If the report is run on its own thread, is the "current" thread the thread the report is running on or is the main application's UI thread?  I don't think I want to set my main application to single thread apartment mode because it is a multi-threaded application (although I really don't know for sure because I am new to multi-threaded programming). 
    My objective is to allow reports to run asynchronously so that the user can do other things while it is being generated.  Here is the code I use to do this:
        ' Previews the report using a new thread (asynchronously)
        Public Sub PreviewReportAsynch(ByVal sourceDatabase As clsMainApplicationDatabase)
            Dim backgroundProcess As System.ComponentModel.BackgroundWorker
            ' Start a new thread to run this report.
            backgroundProcess = New System.ComponentModel.BackgroundWorker
            Using (backgroundProcess)
                ' Wire the function we want to run to the 'do work' event.
                AddHandler backgroundProcess.DoWork, AddressOf PreviewReportAsynch_Start
                ' Kick off the report asynchronously and return control to the calling process
                backgroundProcess.RunWorkerAsync(sourceDatabase)
            End Using
        End Sub
        Private Sub PreviewReportAsynch_Start(ByVal sender As Object, ByVal e As System.ComponentModel.DoWorkEventArgs)
            ' The source database needed to call preview report was passed as the only argument
            Call PreviewReport(CType(e.Argument, clsMainApplicationDatabase))
        End Sub
        ' Previews the report.  From the preview window, the user can print it.
        Public Function PreviewReport(ByVal sourceDatabase As clsMainApplicationDatabase) As FunctionEndedResult
            Dim errorBoxTitle As String
            Dim frmPreview As frmReportPreview
            ' Setup error handling
            errorBoxTitle = "Preview " & Name & " Report"
            PreviewReport = FunctionEndedResult.FAILURE
            On Error GoTo PreviewError
            ' Set up the crxReport object
            If InitializeReportProcess(sourceDatabase) <> FunctionEndedResult.SUCCESS Then
                GoTo PreviewExit
            End If
            ' Use the preview form to preview the report
            frmPreview = New frmReportPreview
            frmPreview.Report = crxReport
            frmPreview.ShowDialog()
            ' Save any settings that should persist from one run to the next
            Call SavePersistentSettings()
            ' If we got this far everything is OK.
            PreviewReport = FunctionEndedResult.SUCCESS
    PreviewExit:
            ' Do any cleanup work
            Call CleanupReportProcess(sourceDatabase)
            Exit Function
    PreviewError:
            ' Report error then exit gracefully
            ErrorBox(errorBoxTitle)
            Resume PreviewExit
        End Function
    The variable crxReport is of type ReportDocument and the windows form called 'frmPreview' has only 1 control, the crystal reports viewer. 
    The print button on the viewer works fine.  Just the export button is failing.  Any ideas?

    Hi Trevor.
    Thank you for the reply.  The report document is create on the main UI thread of my application.  The preview form is created and destroyed on the separate thread.  For reasons I won't get into, restructuring the code to move all the initialization stuff inside the preview form is not an option (OK, if you a really curious, I don't always preview a report, sometimes I print and/or export it directly which means the preview form isn't used).
    What I learned through some other research is that there are some things (like COM calls and evidently some OLE automation stuff) that cannot be run on a thread that uses the MTA threading model.   The export button probably uses some of this technology, thus the message stating that an STA threading model is required.  I restructured the code as follows to accomodate this requirement.  Here is a sample:
    ' Previews the report using a new thread (asynchronously)
        Public Sub PreviewReportAsynch(ByVal sourceDatabase As clsMainApplicationDatabase)
            Dim staThread As System.Threading.Thread
            ' Start the preview report function on a new thread
            staThread = New System.Threading.Thread(AddressOf PreviewReportAsynchStep1)
            staThread.SetApartmentState(System.Threading.ApartmentState.MTA)
            staThread.Start(sourceDatabase)
        End Sub
        Private Sub PreviewReportAsynchStep1(ByVal sourceDatabase As Object)
            Dim staThread As System.Threading.Thread
            ' Initialize report preview.  This includes staging any data and configuring the
            ' crystal report document object for use by the crystal report viewer control.
            If InitializeReportProcess(DirectCast(sourceDatabase, clsMainApplicationDatabase)) = FunctionEndedResult.SUCCESS Then
                ' Show the report to the user.  This must be done on an STA thread so we will
                ' start another of that type.  See description of PreviewReportAsynchStep2()
                staThread = New System.Threading.Thread(AddressOf PreviewReportAsynchStep2)
                staThread.SetApartmentState(System.Threading.ApartmentState.STA)
                staThread.Start(mcrxReport)
                ' Wait for step 2 to finish.  This blocks the current thread, but this thread
                ' isn't the main UI thread and this thread has no UI anymore (the progress
                ' form was closed) so it won't matter that is it blocked.
                staThread.Join()
                ' Save any settings that should persist from one successful run to the next
                Call SavePersistentSettings()
            End If
            ' Release the crystal report
            Call CleanupReportProcess(DirectCast(sourceDatabase, clsMainApplicationDatabase))
        End Sub
        ' The preview form must be launched on a thread that use the single-threaded apartment (STA) model.
        ' Threads use the multi-threaded apartment (MTA) model by default.  This is necessary to make the
        ' export and print buttons on the preview form work.  They do not work when running on a
        ' thread using MTA.
        Public Sub PreviewReportAsynchStep2(ByVal crxInitializedReport As Object)
            Dim frmPreview As frmReportPreview
            ' Use the preview form to preview the report.  The preview form contains the crystal reports viewer control.
            frmPreview = New frmReportPreview
            frmPreview.Report = DirectCast(crxInitializedReport, ReportDocument)
            frmPreview.ShowDialog()
        End Sub
    Thanks for your help!
    Andy

  • Crystal Reports 2008 viewer, print function, Comunication error

    I installed cr2008 on a web server and isntalled sp0
    if I bring up a reprot in smartviewer from a client it works and I can print
    once I installed sp1, sp2 and or sp3 for crystal reports 2008 the print button in crystal reports viewer gives an error when I click the print button.
    If I remove and re-isntall cr2008 and just installed sp0 the print button works again
    Is there a fix to make the print button work in crystal reports smart viewer once sp1 or above have been installed
    thank you
    ted

    Translating the error message on bablefish I get:
    Mistake with the store of the data bank information. Mistake in the file Report {C6512421-348A-4621-B1ED-895D28646A0A} .rpt
    Which I'm sure is not 100% accurate, but it gives a good hint. As well, because of this:
    "Do I need to install an additional / diffrent runtime than 2008 Runtime"
    I wonder how you installed the CR 12 runtime on that computer? For more info on CR runtimes, see [this|https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsforVisualStudio.NETRuntimeDistribution-Versions9.1to12.0] wiki.
    If my suggestion above does not help, make sure the Win\temp directory can be accessed buy the application. Crystal Reports runtime needs to write and read files from the temp directory.
    Ludek

  • Hotsync Log does not show any information since August 2008. My Treo 755p has been syncing fine but nothing shows in the log!

    I just noticed that when I am done syncing, the Hotsync Log does not have any information about the most recent operation.  In fact the date of the last entry in the Log is August!  Anyone know why this is happening and how to fix this?
    Thanks.
    Post relates to: Treo 755p (Verizon)

    Now I know I've lost it--I'm replying to myself!  Would you smart tech people please take a look at what I found and see if it means anything.  Thanks!
    Two more clues:
    1) I was searching the Palm Knowledgebase and found out where the HotSync Log file is.  When I open the file, using Explorer, this message pops up: 'To help protect your security, Internet Explorer has restricted this web page from running scripts or ActiveX Controls that could access your computer.  Click here to...'  If I allow it to run, the screen blinks but nothing seems to change.  If I close the Log file and reopen it, it happens again.  How can I stop this from happening to the file?  Could this be the problem?
    2) The Knowledgebase Article below tells how to create a new 'fake' log file to 'fool' the HotSync Manager.  So I renamed the original log file, then created the new file as instructed.  Then I did a HotSync.  After the HotSync completed successfully, I opened the HotSync Manager and there is my new 'fake' log file that has only the words I typed into it when I created the file. Nothing in the Log about the operation at all! 
    Article ID: 38959   What does the error that ends with 'HotSync.log is missing' mean and how do I fix it?
    The HotSync Manager is very particular: if it doesn't find things exactly as it expects, it won't work. One of the things it has to find in the right place is the HotSync log, a file where the HotSync manager records everything it does. See How can the HotSync log help me to troubleshoot HotSync problems? for more information about this file.
    When you get this error, your HotSync Manager can't find the HotSync Log. This prevents you from performing a HotSync operation. Luckily, the HotSync Manager isn't too bright. Give it any file called HotSync.log and it will be happy again.
    The easiest way to give it what it expects is to create a new text document, rename it, and put it in the folder where the HotSync Manager expects to find it. Here's how:
    Launch the Windows Notepad. You can usually get to it by clicking on the Start Menu, choosing Programs, then Accessories and finally Notepad.
    Type some text. You can type anything you want, as long as there's at least one character in the Notepad document.
    From the File menu, choose Save As.
    In the Save dialog, navigate to your user folder in the Palm or Handspring folder (find your user folder).
    Name the document HotSync and click Save.
    Launch Windows Explorer. You can get to it by double clicking on My Computer or by clicking on the Start Menu, choosing Programs and then Windows Explorer.
    From the Tools menu, choose Folder Options.
    Click on the View tab.
    Uncheck the box next to Hide file extensions for known file types.
    Navigate to your user folder.
    Right-click once on the HotSync.txt document, and select "Rename" from the menu. Rename the file HotSync.log
    Attempt another HotSync operation. If you still get the "HotSync.log is missing" message, contact Handspring.
    Article ID: 38959 Article Type: Error, Troubleshooting, How To Date Created:  Sunday, December 12, 2004 9:10:17 AM Date Modified:  Friday, April 20, 2007 4:03:38 PM Relevant products:  Treo 300, Treo 180, Treo 180g, Treo 270, Visor Edge, Visor Neo, Visor Pro, Visor Platinum, Visor Prism, Visor Deluxe, Treo 90
    Post relates to: Treo 755p (Verizon)
    Post relates to: Treo 755p (Verizon)

  • Lightroom 5.3 does not show image info tooltips in grid view expanded cells

    In my copy of Lightroom 5.3, image info tooltips do not show in the grid view expanded cells even though that option is activated in view options. Is this an issue with Lightroom 5.3? (Note: Image info tooltips in grid view compact cells and the filmstrip do display, however.)

    I don't think it ever has. I've just checked back through all versions from Lightroom 2, and don't get the same information in Expanded Cell view as I do in Compact Cell view.
    So not a specific issue with LR5.3, more likely either it's "as designed" or one of those very long-standing bugs that haven't been fixed.

  • Crystal Reports 2008 Viewer Syntax error number: -2146827286

    I have CrystalReportViewer12 installed on Apache/Tomcat 6. I have configured all components as necessary: installed jars and setup web.xml/CRConfig.xml. I can get the report to display appropriately in my jsp page. But when I try to use the Go To Next Page button I receive the following error:
    name: SyntaxError
    message: Syntax error
    number: -2146827286
    description: Syntax error
    Any assistance will be appreciated.
    Thanks.

    Translating the error message on bablefish I get:
    Mistake with the store of the data bank information. Mistake in the file Report {C6512421-348A-4621-B1ED-895D28646A0A} .rpt
    Which I'm sure is not 100% accurate, but it gives a good hint. As well, because of this:
    "Do I need to install an additional / diffrent runtime than 2008 Runtime"
    I wonder how you installed the CR 12 runtime on that computer? For more info on CR runtimes, see [this|https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsforVisualStudio.NETRuntimeDistribution-Versions9.1to12.0] wiki.
    If my suggestion above does not help, make sure the Win\temp directory can be accessed buy the application. Crystal Reports runtime needs to write and read files from the temp directory.
    Ludek

  • Maps does not show up at all in Notification Center why

    Hello, I am trying to get Maps to show up in notification center so i can enable notifications for them. I do not see it anywhere on my wifes phone but I see it on my phone.

    The way to fix the issue is to log out of iCloud on your main computer and sign back in. Then go to the new maps app on the desktop and send yourself directions to your iOS device. When you do this, this will activate that notification option you do not see in your notification center on your iOS device. This is what happened for me. I figured it out by doing this myself. For some reason doing this activates maps to show up in notification center.

  • Map does not show in google search results page

    Normally when I searched for a type of business on google, a small map showed up beside the search results. Unfortunately, I did something weird on my mousepad that froze my computer and after reboot, the map box was gone. And even more unfortunately, I use the silly sync function so now, none of my comps are getting the map.
    Is there a way to get the little mappy box back, or am I forever doomed?

    I'm not sure how this could be a Firefox setting, but I would try the "usual" first:
    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    Alternately, you also can clear Firefox's cache completely using:
    "3-bar" menu button (or Tools menu) > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    If you have a large hard drive, this might take a few minutes.
    (2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
    * right-click and choose View Page Info > Security > "View Cookies"
    * Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
    In the dialog that opens, you can remove the site's cookies individually.
    Then try reloading the page. Does that help?
    In case one of your extensions is involved, could you test the page in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
    You can restart Firefox in Safe Mode using either:
    * "3-bar" menu button > "?" button > Restart with Add-ons Disabled
    * Help menu > Restart with Add-ons Disabled
    Not all add-ons are disabled: Flash and other plugins still run
    After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
    Any difference? If that helps, it could be that you selected to block that element in one of your add-ons.

Maybe you are looking for