Getting error in CPDBObjectWriteUtils.cpp while copying Slides

Hi all, not sure if I'm being cruel and unusual for trying to copy 100 Slides but I am getting the following error when I did. Not sure if there's an answer but it might be of interest to the Captivate Developers to see this error message,
Fergal

Try copying over 5 or 10 slides at a time and see if that solves the issue.  It may be that your machine doesn't have the resources to do such a large copy.  Or it could also be that one of your slides is corrupted and missing a component, meaning that when you try to copy it, this message appears.  If you copy over a few slides at a time you'll probably get this message again when you reach the problem slide.  Then you can eliminate it.

Similar Messages

  • Getting error in my device while signing up to ICloud. The same ID's is working well in downloading itunes

    Getting error in my device while signing up to ICloud. The same ID's is working well in downloading itunes

    Hi Maninder Singh Golar,
    Thanks for visiting Apple Support Communities.
    If you can use your Apple ID to sign into the iTunes Store, but not iCloud, see this article for some troubleshooting tips that can help:
    iCloud: Account troubleshooting
    http://support.apple.com/kb/TS3988
    Cheers,
    Jeremy

  • Getting error java.lang.NullPointerException while selection LOV

    I am getting error java.lang.NullPointerException while selecting LOV. Please help
    SEVERE: Server Exception during PPR, #1
    javax.servlet.ServletException
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:277)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:181)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:85)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:279)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._invokeDoFilter(TrinidadFilterImpl.java:239)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:196)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:139)
         at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at oracle.security.jps.wls.JpsWlsFilter.doFilter(JpsWlsFilter.java:102)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:65)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:149)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(Unknown Source)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: java.lang.NullPointerException
         at oracle.adfinternal.view.faces.model.binding.RowDataManager.setRowKey(RowDataManager.java:129)
         at oracle.adfinternal.view.faces.model.binding.FacesCtrlHierBinding$FacesModel.setRowKey(FacesCtrlHierBinding.java:530)
         at org.apache.myfaces.trinidad.component.UIXCollection.setRowKey(UIXCollection.java:429)
         at oracle.adfinternal.view.faces.renderkit.rich.TableRendererUtils.decodeSelectedRowKeys(TableRendererUtils.java:470)
         at oracle.adfinternal.view.faces.renderkit.rich.table.BaseTableRenderer.decodeIncompatiblePropertyKey(BaseTableRenderer.java:208)
         at oracle.adf.view.rich.render.RichRenderer.decode(RichRenderer.java:203)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.__rendererDecode(UIXComponentBase.java:1089)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decode(UIXComponentBase.java:714)
         at org.apache.myfaces.trinidad.component.UIXTable.decode(UIXTable.java:136)
         at org.apache.myfaces.trinidad.component.UIXCollection.processDecodes(UIXCollection.java:193)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:970)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:956)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.processDecodes(UIXComponentBase.java:812)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:970)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:956)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.processDecodes(UIXComponentBase.java:812)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:970)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:956)
         at oracle.adf.view.rich.component.UIXPopup.processDecodes(UIXPopup.java:60)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildrenImpl(UIXComponentBase.java:970)
         at org.apache.myfaces.trinidad.component.UIXComponentBase.decodeChildren(UIXComponentBase.java:956)
         at oracle.adf.view.rich.component.UIXInputPopup.processDecodes(UIXInputPopup.java:137)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl$ApplyRequestValuesCallback.invokeContextCallback(LifecycleImpl.java:1113)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:722)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:731)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:731)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.invokeOnComponent(ContextSwitchingComponent.java:153)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:731)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:731)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:731)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:731)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:731)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:731)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:731)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:731)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:731)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:731)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:731)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:731)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:731)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:731)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.invokeOnComponent(ContextSwitchingComponent.java:153)
         at oracle.adf.view.rich.component.fragment.UIXPageTemplate.invokeOnComponent(UIXPageTemplate.java:208)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:731)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:731)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:731)
         at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:664)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:303)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:175)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
         ... 29 more

    Duplicate: Re: Get null pointer exception while selecting LOV for a parameter form object

  • Error in system ERDCLNT000 while copying the document

    Error in system ERDCLNT000 while copying the document
    Message no. CRM_ORDER_MISC 020
    Diagnosis
    Errors occurred while transferring the document into another system. To view the error messages, see the enclosed log.
    Transmission log
    No category of hierarchy 'Purchasing' has been maintained for product SRV_SLS (Notification E CRM_SRV_LOGISTIC_EXT 003)

    Hi Hasan,
    Thanks for your reply.
    I could find table TACE_ACRTYPE which has entries as in attached screenshot.
    How do I proceed now.
    Warm Regards,
    Nidhi

  • Purchased film from itunes and want to download to ipad. Getting error message. Attempting to copy to the disk "OS_Install" failed. You do not have enough access priveleges for this operation.. Any ideas?

    Purchased film from itunes and want to download to ipad. Getting error message. Attempting to copy to the disk "OS_Install" failed. You do not have enough access priveleges for this operation.. Any ideas?

    Purchased film from itunes and want to download to ipad. Getting error message. Attempting to copy to the disk "OS_Install" failed. You do not have enough access priveleges for this operation.. Any ideas?

  • Error in system EC6CLNT400 while copying the document

    Hi there,
    I am facing an issue while doing "Usage Confirmation" for Sales Contract in SAP CRM Intellectual Property Management.
    Error Specifications:
    Error in system EC6CLNT400 while copying the document
    Message no. CRM_ORDER_MISC 020
    Diagnosis
    Errors occurred while transferring the document into another system. To view the error messages, see the enclosed log.
    Transmission log
    No conditions have been assigned to accrual type IRPAID in ACE comp.IPM (Notification E CRM_ACE 017)
    Please reply with possible solution.
    Warm Regards,
    Nidhi Somani

    Hi Hasan,
    Thanks for your reply.
    I could find table TACE_ACRTYPE which has entries as in attached screenshot.
    How do I proceed now.
    Warm Regards,
    Nidhi

  • Getting Error Code as -5002 while posting A/R Invoice as Draft using  C#

    In the following code we are getting an error while posting the invoice as an draft. Can any one help ?
                com.Server = ConfigurationManager.AppSettings["Server"];
                com.CompanyDB = ConfigurationManager.AppSettings["CompanyDB"];
                com.DbUserName = ConfigurationManager.AppSettings["DBUsername"];
                com.DbPassword = ConfigurationManager.AppSettings["DBPassword"];
                com.UserName = ConfigurationManager.AppSettings["Username"];
                com.Password = ConfigurationManager.AppSettings["Password"];
                com.UseTrusted = true;
              long RetCode = com.Connect();
                Documents sapDoc;
                sapDoc = (SAPbobsCOM.Documents)(com.GetBusinessObject(BoObjectTypes.oDrafts ));
                sapDoc.DocObjectCode = BoObjectTypes.oInvoices;
                sapDoc.DocDueDate = dDueDate.Value;
                sapDoc.CardCode = txtCustomerCode.Text.Trim();
                sapDoc.HandWritten = BoYesNoEnum.tNO;
                sapDoc.DocTotal = Convert.ToDouble(txtTotalbeforeDiscount.Text.Trim());
                for (int i = 0; i < dgInvoice.Rows.Count - 1; i++)
                    //sapDoc.Lines.LineNum = i;
                    sapDoc.Lines.ItemCode = dgInvoice.Rows<i>.Cells[1].Value.ToString().Trim();
                    sapDoc.Lines.Quantity = Convert.ToDouble(dgInvoice.Rows<i>.Cells[2].Value.ToString().Trim());
                    sapDoc.Lines.Expenses.ExpenseCode = 4;
                    sapDoc.Expenses.LineTotal = sapDoc.Lines.Quantity * 1500;
                    sapDoc.Lines.Add();
                    MessageBox.Show(sapDoc.Lines.LineNum.ToString ());
                long j = sapDoc.Add();
                if (j == 0)
                    MessageBox.Show("Added to SAP Business One as Draft!");
    I'm getting an error code as -5002 and its not getting stored as an draft. This was done based on SDK Example given in the help document. Can any body throw light on the same.
    Edited by: Sadanand Manda on Nov 24, 2008 11:45 AM
    Edited by: Sadanand Manda on Nov 24, 2008 11:46 AM

    SAP Note Number: 1179405
    Error -5002 when trying to copy a document with Sales BOM
    In order to create the delivery via the DI, you need to set the oDoc.Lines.BaseLine value to the LineNum value from the RDR1 table (in the above example you should enter the value 2).
    we set oDoc.Lines.BaseLine=0 before starting the lines loop. This has resolved the issue.
    This note was really helpful and it was found in another query.
    You can also refer to this. https://forums.sdn.sap.com/click.jspa?searchID=19070513&messageID=6178079
    Thanks.
    Edited by: Sadanand Manda on Nov 24, 2008 12:16 PM

  • I get error 8062 when trying to copy files from one external hard drive to another. It starts out copying files, but after 10 minutes or so it stops and I get the error 8062. The hard drive tech support says the problem is in my Macbook Air.

    I cannot copy my doc and photos and videos from one external hard drive to a second external hard drive -- both plugged in to my MacBook Air -- I get Error 8062 and the copying (which seemed to be going on for 10 minutes) stops and nothing gets copied.
    As any Macbook Air owner knows, there is SO LITTLE storage capacity on the computer that you have to back up big files onto an external hard drive to avoid getting the other annoying error that says you have no more memory/storage capacity/whatever the proper term is, and you cannot use the computer.
    Backstory: Before this error cropped up, I had backed up lots of files to an external drive and then removed them from my computer. But then the external hard drive got corrupted and I could not access my entire photo library. Had to pay $850 to Kroll Ontrack to recover those files. I have now bought 2 new external 1 Terrabyte  hard drives as protection against another such disaster. BUT I cannot copy the files from the first hard drive where all my reovered files now sit, to another backup hard drive.
    Feeling vulnerable. Please help.
    SusaninNY

    From the menu bar, select
     ▹ System Preferences ▹ Energy Saver ▹ Power Adapter
    and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
    If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
    Check that the data cable is securely inserted at both ends.
    Try a different cable.
    If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
    If you're connecting it directly, try a different port.
    Disconnect all other devices on the bus, or as many as possible.
    Test the drive with another Mac. Test another drive with this Mac.
    If the drive is bus-powered, but has an AC adapter, connect the adapter.
    Start up in Safe Mode and test.
    If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

  • Getting Error of Runtime Exceeded while generating OTF for PDF in smartform.

    Hi All,
    I am getting a error of runtime exceeded while generating OTF file for PDF in smartform through FM. The report is taking too much time before giving the output...and most of the time going to dump saying report has exceeded the runtime. All is working well till the Smartform FM reached. I debugged this FM and found that the TABLES parameter is having problem, may be there are too many tables in that parameter.Please help. Below is the code-
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
      EXPORTING
        formname           = c_form_name
      IMPORTING
        fm_name            = v_fm_name
      EXCEPTIONS
        no_form            = 1
        no_function_module = 2
        OTHERS             = 3.
    CALL FUNCTION   v_fm_name
      EXPORTING
        control_parameters      = wa_control
        output_options             = wa_output
        user_settings                = 'X'
        spl_gl                         = p_spl_gl
        open_dt                      = p_budat
        bukrs                         = p_bukrs
        w_check                    = w_check
        w_check1                   = w_check1
      IMPORTING
    *   document_output_info =
        job_output_info                  = wa_otf
    *   job_output_options     =
      TABLES
        kna1                       = t_kna1
        bsid_p                     = t_bsid_p
        bsid                         = t_bsid
        TEXT                       = t_text
        spl                           = t_spl
        bsid_x                      = t_bsid_x
        bsid_l                       = t_bsid_l
        bsid_h                      = t_bsid_h
        bsid_q                     = t_bsid_q
        bsid_tot                   = t_bsid_tot
      EXCEPTIONS
        formatting_error           = 1
        internal_error             = 2
        send_error                 = 3
        user_canceled              = 4
        OTHERS                     = 5

    Hi
    Yes as Eltan says you need to consider there are two blocks of abap program:
    - the first one is the driver program (but it seems there's no problem here because it called the smartform quickly)
    - the second one is inside the smartform (It's possible to write abap routine in the smartform), and it seems the problem could be here
    The variable c_form_name has the name of the smartform, you can manage it by transaction SMARTFORMS
    but now it's not possible to say you why the print takes too long time, you need to do a trace
    Max

  • Getting Error In the Routine - While writing Code for the Cross Reference.

    Hi,
    Getting Error In the Start Routine - While writing Code for the Cross Reference from the Text table ( /BIC/TZMDES with Fields /BIC/ZMDES(Key),TXTSH ) Getting Error as [ E:Field "ZMDES" unknown ].
    Transformation : IOBJ ZPRJ3(Source) -> IOBJ ZPRJC ( Target ).
    The Source  Fields are: 0logsys(Key),zprj3(Key),ZDOM3.
    The Target Fields are : 0logsys(Key),zprjc(Key),ZDOM3, UID.
    Here i am trying to Update the target Field UID by Comparing the Source Field [ zprj3(Key)] with the Text table ( /BIC/TZMDES ) and update the UID.
    The Code is as below:
    Global Declarations in the Start Routine:
    Types: begin of itabtype,
            ZMDES type /BIC/TZMDES-/BIC/ZMDES,
            TXT type /BIC/TZMDES-TXTSH,
             end of itabtype.
    data : itab type standard table of itabtype
    with key ZMDES,
    wa_itab like line of itab.
    Routine Code :
    select * from /BIC/TZMDES into corresponding fields of table itab for
    all entries in SOURCE_PACKAGE
    where ZMDES = SOURCE_PACKAGE-/BIC/ZPRJ3.
    READ TABLE itab INTO wa_itab
    WITH KEY ZMDES = SOURCE_PACKAGE-/BIC/ZPRJ3
    BINARY SEARCH.
    IF SY-SUBRC = 0.
    RESULT = wa_itab.
    CLEAR wa_itab.
    The tys_SC_1 structure is :
    BEGIN OF tys_SC_1,
         InfoObject: 0LOGSYS.
            LOGSYS           TYPE RSDLOGSYS,
         InfoObject: ZPRJ3.
            /BIC/ZPRJ3           TYPE /BIC/OIZPRJ3,
         InfoObject: ZDOM3.
            /BIC/ZDOM3           TYPE /BIC/OIZDOM3,
         Field: RECORD.
            RECORD           TYPE RSARECORD,
          END   OF tys_SC_1.
        TYPES:
          tyt_SC_1        TYPE STANDARD TABLE OF tys_SC_1
                            WITH NON-UNIQUE DEFAULT KEY.
    Please suggest with your valuable inputs.
    Thanks in Advance

    I have split the code in two.. one for start routine.. other for field routine.. hope this helps
    Types: begin of itabtype,
    ZMDES type /BIC/TZMDES-/BIC/ZMDES,
    TXT type /BIC/TZMDES-TXTSH,
    end of itabtype.
    data : itab type standard table of itabtype
    with key ZMDES,
    wa_itab like line of itab.
    Start routine
    select * from /BIC/TZMDES into corresponding fields of table itab for
    all entries in SOURCE_PACKAGE
    where ZMDES = SOURCE_PACKAGE-/BIC/ZPRJ3.
    Sort itab.
    field routine
    CLEAR wa_itab.
    READ TABLE itab INTO wa_itab
    WITH KEY ZMDES = SOURCE_FIELD-/BIC/ZPRJ3
    BINARY SEARCH.
    IF SY-SUBRC = 0.
    RESULT = wa_itab-<field name>

  • Error in ERP system  while copying the document from CRM system

    Hi Friends,
    I have created a CRM sales order in CRM Web Ui or Gui. I am getting this Errors.
    Diagnosis
    Errors occurred while transferring the document into another system. To view the error messages, see the enclosed log.
    Transmission log
    u2022     Product  cannot be recoded for ERP System  (Notification E CRM_ORDER_MISC 015)
    u2022     Product  cannot be recoded for ERP System (Notification E CRM_ORDER_MISC 015)
    u2022     No customer is assigned to business partner 417283 (Notification E CRM_BUPA_MAPPING 002)
    Please give suggestions what can i do for this.Please specify clearly the required steps to debug this error
    also
    with respect to first error ,I tried to replicates the product from crm to ERP system in COMMPR01(Send to ERP Option), but it has given this error.
    "input data for industrial material is not fully"
    regards,
    sunil

    Hi Sunil,
    You are getting error in the Sales Order is because of Master Data.
    Sales Documents will flow from CRM to R/3 when master data is consistent in R/3 & CRM side.
    Please maintain the master data in R/3 side & download into CRM Side.
    For Customer use adpater object CUSTOMER_MAIN & for Material object is "Material"
    Use following link for downloading  Customer Master & Material master.
    http://help.sap.com/saphelp_crm20c/helpdata/en/4D/CFF837A9AAE651E10000009B38F8CF/frameset.htm
    http://help.sap.com/saphelp_crm20c/helpdata/en/67/bdcbe77d9611d396bd00a0c930e0da/content.htm
    Best Regards,
    Rajendra

  • Getting Error of SqlBuildTask fail while building the database project

    Hi Experts,
      I am getting error while building the database project in following manner please help on this.
    Error 803 04018: The "SqlBuildTask" task failed unexpectedly.
    System.NullReferenceException: Object reference not set to an instance of an object.
       at Microsoft.Data.Tools.Schema.UserInteractionServices.GetElementName(IModelElement element, ElementNameDetails details)
       at Microsoft.Data.Tools.Schema.Sql.SqlUserInteractionServices.GetElementName(IModelElement element, ElementNameDetails details)
       at Microsoft.Data.Tools.Schema.Sql.Sql110UserInteractionServices.GetElementName(IModelElement element, ElementNameDetails details)
       at Microsoft.Data.Tools.Schema.Sql.Validation.MismatchedNameRule.Analyze(SqlSchemaModel sqlSchemaModel, ISqlModelElement sqlElement, SqlRuleSetting ruleSetting, SqlRuleExecutionContext context)
       at Microsoft.Data.Tools.Schema.Sql.Validation.SqlValidationRuleProxy.Analyze(SqlSchemaModel sqlSchemaModel, ISqlModelElement sqlModelElement, SqlRuleSetting ruleSetting, SqlRuleExecutionContext context)
       at Microsoft.Data.Tools.Schema.Sql.Validation.SqlValidationRule.Analyze(SqlRuleSetting ruleSetting, SqlRuleExecutionContext context)
       at Microsoft.Data.Tools.Schema.Sql.RuleEngine.SqlRuleEngine.ExecuteRuleImpl(SqlRuleSetting ruleSetting, SqlRuleExecutionContext context, Predicate`1 suppressProblem, IEnumerable`1& errors)
       at Microsoft.Data.Tools.Schema.Sql.RuleEngine.SqlRuleEngine.ExecuteRules(SqlSchemaModel dataSchemaModel, IEnumerable`1 ruleSettings, IEnumerable`1& errors, Predicate`1 suppressProblem, Func`1 executeCanceled)
       at Microsoft.Data.Tools.Schema.Sql.RuleEngine.SqlRuleEngine.ExecuteRules(SqlSchemaModel dataSchemaModel, IEnumerable`1 rules, IEnumerable`1& errors, Predicate`1 suppressProblem, Func`1 executeCanceled)
       at Microsoft.Data.Tools.Schema.Sql.Build.SqlTaskHost.RunBuildValidation(SqlSchemaModel model, ErrorManager errorContainer, Func`1 buildCanceledQuery, HashSet`1 includedRuleIDs, HashSet`1 excludedRuleIDs)
       at Microsoft.Data.Tools.Schema.Sql.Build.SqlTaskHost.OnRunBuildValidations(ErrorManager errorManager, HashSet`1 includedRuleIds)
       at Microsoft.Data.Tools.Schema.Sql.Build.SqlTaskHost.RunBuildValidations(ErrorManager errorManager, HashSet`1 includedRuleIDs)
       at Microsoft.Data.Tools.Schema.Tasks.Sql.TaskHostLoader.LoadImpl(ITaskHost providedHost, TaskLoggingHelper providedLogger, Boolean runAllBuildTimeValidationRules)
       at Microsoft.Data.Tools.Schema.Tasks.Sql.TaskHostLoader.Load(ITaskHost providedHost, TaskLoggingHelper providedLogger, Boolean runAllBuildTimeValidationRules)
       at Microsoft.Data.Tools.Schema.Tasks.Sql.SqlBuildTask.ExecuteLoadTaskHostStep()
       at Microsoft.Data.Tools.Schema.Tasks.Sql.SqlBuildTask.ExecuteStep(Func`1 step)
       at Microsoft.Data.Tools.Schema.Tasks.Sql.SqlBuildTask.Execute()
       at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute()
       at Microsoft.Build.BackEnd.TaskBuilder.<ExecuteInstantiatedTask>d__20.MoveNext() C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\SSDT\Microsoft.Data.Tools.Schema.SqlTasks.targets 547 5 ABC_DB
    Niraj Sevalkar

    Hi Niraj, does this happen for all projects or for one specific project? I'd love to understand if this is a specific bug or if it might be a setup issue. 
    If this issues is reproduceable on the latest SSDT bits, I'd suggest capturing the event log for what is going wrong and then opening a connect
    bug for this issue at https://connect.microsoft.com/SQLServer/feedback/CreateFeedback.aspx and
    use the category "Developer Tools(SSDT, BIDS, etc.)". We're trying to track all bugs through connect so that you can tell when we have fixed the issue and we can request
    more information. Please include the event log (instructions on this below) plus any other useful information you can provide, such as an example of exact steps to reproduce the problem.
    Gathering an Event Log for SSDT
    For diagnostic purposes we would like you to gather an event log for the issue that you are experiencing in SSDT. In order to gather a log and send it to a member of
    the team, please follow the steps below.
    Open a new command prompt as Administrator.
    Run the following command
    logman create trace -n DacFxDebug -p "Microsoft-SQLServerDataTools" 0x800 -o "%LOCALAPPDATA%\DacFxDebug.etl" -ets
    logman create trace -n SSDTDebug -p "Microsoft-SQLServerDataToolsVS" 0x800 -o "%LOCALAPPDATA%\SSDTDebug.etl" -ets
    Run whatever the target/issue scenario is in SSDT.
    Go back to the command prompt and run the following commands
    logman stop DacFxDebug -ets
    logman stop SSDTDebug -ets
    The resulting ETL files will be located at %LOCALAPPDATA%\SSDTDebug.etl & %LOCALAPPDATA%\DacFxDebug.etl and can be navigated to using Windows Explorer.
    Please attach this file when creating the connect bug
    NOTE - These logs will only be used by Microsoft product team members in order to better diagnose the problem you are experiencing
    with SSDT and will not be shared elsewhere. If you want to make sure that there is no private information in your ETL file, the SSDTDebug.etl file can be opened and analyzed using the Windows Event Viewer.
    To do this, open the Windows Event Viewer application. In the right-hand panel, select Open Saved Log. Navigate to the location where you saved the log, open, and review
    the contents of the trace.
    Thanks,
    Kevin

  • Getting "Error 404--Not Found" while connecting to OLT session

    Hi all,
    I am getting "Error 404--Not Found" error while connecting to OLT session. I had tried re-starting all the services including the database services but to no avail.
    Below is the description :
    Error 404--Not Found
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    10.4.5 404 Not Found
    The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
    If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
    If anybody had faced similar issues, please do let me know the resolution for the same.
    Thanks,
    Sunny

    Is that the first time you connect to OLT?
    If yes, please check OATS release notes.
    Thx
    JB

  • Getting error  connection timed out while invoking webservice from bpel.

    Hi,
    I am trying to call a secure webservice developed in .Net having extension .svc from the bpel service and in response i am getting error
    com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.oracle.com/bpel/extension}remoteFault}
    messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
    parts: {{summary=<summary>exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection timed out: connect</summary>
    I am able to call this web service from the java programme using HTTPClient by setting the username/password and soapaction in http Header but not from the BPEL process. This .Net service is synchronous in nature. I also set the proxy in opmn.xml but didn't got any success.
    Please reply me ASAP. Need urgent help.
    Thanks.

    Are you working on 11g ? if this is 11g
    How are you invoking the webservice ...does it have any authentication..
    If the webservice which you are invoking has basic http authentication...
    1. In the composite.xml file, right click on the reference and configure WS policies. In security tab, add a security policy named"oracle/wss_http_token_client_policy"
    2. Add two binding properties for the reference
    (i) oracle.webservices.auth.username
    (ii) oracle.webservices.auth.password
    and provide the username and password for those two properties...
    Just try this out...
    Thanks,
    N

  • Getting error message in dreamweaver while pasting

    Hi,
    I am getting this error while I am trying to do the copy
    paste function in Dreamweaver 8.
    While
    executing DWShortcuts_HTMLSource_Paste command in menus.xml, the
    following JavaScript error(s) occured: TypeError: MM.event has no
    properties
    Pls Help...... Regards.

    Find and delete
    Application Data\Macromedia\Dreamweaver 8\Configuration\WinFileCache-CB42E5FF.dat
    No need to wipe your whole config or reinstall.

Maybe you are looking for