Gutenprint with HP 2100--hangs up between print jobs. Help?

Working on hooking up HP Lazer Printer 2100 with OS 10.9.1
Have successfully installed Gutenprint 5.2.9 and usbtb
USB hookup to computer (Mac Pro).
Printer working but only one job at a time. After each print job, the queue hangs up (saying printer not responding). If I click the pause button and then the go button again, printer prints the next job fine.
I am no expert on this sort of thing and am already giving myself some serious high fives for having gotton this far after everyone told me to simply ditch my old 2100 and buy a new lazer. So now if I can work around this problem, I think I'm good to go.
Anyone with suggestions?

I got an HP2100 for ages now. My wife can print only sometimes with 10.4 with generic drivers and I can print better with 10.5. Just today the printer did not want to talk to me anymore and the only way to connect was with Appletalk enabled over ethernet cable. That works usually very reliably for me.
Going over airport to the printer (through the wireless router) is the flakiest. I know this sounds bad but once it works it usually works.
Regarding your specific issue: One thing that helps is to hold down the little button on the control panel and then the bigger one in the front for a while. When released, the printer will print a Jetdirect Configuration page and a self test configuration page. That will tell you a lot.
Hope you find a bit of usefulness in my response.

Similar Messages

  • How to get laserjet to pause between print jobs

    I just reinstalled my OS (Win7) over the weekend, and the laserjet P1102w is working fine, but it is doing one thing differently than before. For as long as I can remember (even going back to an earlier laserjet 1018), I could send 2-3 print jobs to the printer. When the first was done,  the printer would pause for a few seconds, and only then, start pushing out the pages of the second print job (I'd use that pause to alert me to go to the printer and scoop up all the pages of that first job).
    Now, it isn't doing that.
    Is there a setting to check? Honestly I'm not sure what to look for, but I didn't see anything in Windows' printer preferences.

    Hi paulri,
    Sorry that I had misread your post. The pausing between print jobs, was most likely a function of a communication lag between the printer and the computer, and not a feature of the printer or the software. This option is not available with the Operating Systems print spooler.
    As a workaround, I would just print one document at a time, and wait for it to finish printing, before printing the next document.
    For future reference, just in case you may need it, here is your printer's user guide.
    Thank you for posting, and have a nice day!
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Is anyone with iphone 4 'hang' in between after sliding to unlock?

    is anyone with iphone4 'hang' in between after sliding to unlock?

    See Here  >
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • Print job from Windows hangs in iMac print queue - help please!!!

    I have a new iMac core duo and am trying to print to my Epson Stylus CX4600 from Windows. Bonjour sees the printer and sets it up, the print job seems to go just fine, but when I check my G5 (the Epson is connected to the G5) I see the job stopped. If I try to start the job, nothing happens... the only way to clear the Q is to delete the job.
    I have all the latest drivers, and have tried bonjour both with generic postscript and with the Epson driver - no luck.
    Any advice would be greatly appreciated....

    Embedded Chat turns Web Visitors into Clients
    Turn up to 90% of your web visitors into Clients!
    Our Embedded Chat does just that.
    Not just live chat, Embedded Chat!
    This Phenomenon Will Skyrocket Your Sales!
    If you are not using Embedded Chat on your site, you are losing valuable
    clients. That is just a fact. There is an unimaginable difference what
    Embedded chat does for converting browsing web surfers into leads and
    We get your visitors contact information or it's FREE
    We're so confident that it works, we give you a 15-day, fully-functioning,
    free trial. Go ahead, try it out.
    Our staff is goal oriented and dedicated to getting the contact information
    of people that are interested in your products or services.
    With our Embedded chat your customers do not even have to click a button to
    chat, they are already in a chat when they enter the site, If they ignore
    the chat window we have the power to invite them to chat with a floating
    invitation. Why would you want to do that Direct contact with the customer
    means customer confidence, conversion rates and sales skyrocket.
    Imagine this:
    Let's say that your customer contacts you for a live chat through our
    Embedded Chat. They'd like to buy a pack of 40 burritos, but they only see
    packages of 15. Not only can you push them to the page showing a pack of 50
    burritos, you can offer them a discount and assist them through the purchase
    process all through Embedded Chat. The customer is happy, they commend you
    for the great customer service, and you've got more money in your pocket.
    Embedded Chat helps organizations to increase online Sales Revenue and
    provide better Customer Service - all in Real Time - and literally with a
    mouse click
    Embedded Chat provides instant benefits and maximum returns to its clients.
    Embedded Chat Significantly increases new customer acquisitions and online
    Embedded Chat Generates qualified leads from your online marketing and
    print campaigns.
    Embedded Chat Decreases shopping cart abandonment rates and customer churn.
    Embedded Chat Increase sales, reduce support costs, and attain rapid ROI.
    Embedded Chat Services more prospects and customers, more efficiently.
    Embedded Chat Maximizes customer satisfaction, loyalty and profit.
    Imagine if your customers can get answers and live help to their questions
    from you right into right now. No matter how informative your website is,
    people will have more questions about your services or product. Our live
    chat software will increase trust by making your website come alive.
    * Instead of leaving visitors to navigate your site by themselves, you
    would be in control. You would be able to engage your customers and
    proactively guide them right toward a sale.
    * No longer will you worry about losing a potential customer because a
    simple question wasn't answered.
    * You will increase your visitors' confidence by showing there is a real
    live person behind your site.
    Increase your sales: Chatters are 3 times more likely to buy from the
    Site visitors that are provided the option to chat with a sales expert are
    25-200% more likely to make purchases from your website. Online shoppers are
    still wary to trust a website's catalogue technology and purchasing
    procedure, and sometimes even the most web savvy shoppers need help. With
    Embedded Chat, your business can offer your customers the information and
    online confidence they seek. Agents can use the opportunity to develop
    relationships with customers and suggest items to upsell.
    Improve your customer service: Chatters are twice as likely to return to the
    90% of customers prefer live human interaction for online assistance, but
    80-90% of the same customers would rather not use the phone. Using Embedded
    Chat, customers avoid the hassles of navigating phone systems or waiting on
    hold for up to an hour to speak with a phone agent. Many will simply give up
    and find your products elsewhere if they can't get help instantly. This is
    especially true among dial-up internet users.
    Increase your online revenue
    Chatters are 3 times more likely to buy from your site having spoken with
    your sales staff
    Increase staff performance
    Each chats is automatically saved online so you can access them at the end
    of every day to see how your staff performed. This will give you a better
    idea of what your customers requests are and how your staff are handling
    Reduce your staff costs
    One operator can easily handle multiple customers at the same time.
    Resolving customer support issues with Embedded Chat is up to 90% less
    expensive than a phone call or an email. By incorporating the live chat
    button into the emails your staff send to customers you also make it easier
    for customers to respond quickly.
    Increase your customer satisfaction and loyalty
    Your customers experience shorter waiting time and get immediate answers to
    their questions.
    24-7 Chat Answering
    Embedded Chat has a 24 hour call centre that can answer your visitors chats
    for you after hours and on weekends, passing you on leads so even when your
    staff have left for office we are still gathering leads to pass onto you the
    next business day.
    Hosted and Client Hosted
    Embedded Chat has both a hosted version (stored on our servers) and a client
    hosted (stored on your servers) program allowing you more flexibility.
    Report Download
    At the end of each day our team can send you a file with all the chats that
    took place that day. This can be printed off for you to browse no the way
    home. This allows an excellent insight into what your staff are saying to
    customers and what your customers are looking for.
    Prechat Survey
    Embedded Chat allows you to set-up a series of questions for your visitors
    to answer once theyve clicked the chat button. This will help you to build a
    profile of your website visitors before you begin chatting. You can also use
    this to follow up with our website visitors.
    Customised buttons
    Our team can provide you with well-designed buttons to attract your visitors
    attention. We can also customise the chat interface to ensure that it blends
    with your website.
    Canned Responses
    You can save standard responses to questions to answer typical customer
    queries. This saves time and enables you to word your responses well.
    Chat logs
    All chats are automatically saved on a secure database which you can view 24
    hrs 7 days a week.
    With Embedded Chat you can use chat logs to run reports on various criteria
    such as operator reports, reports by date, reports by keyword(s), reports by
    prechat survey criteria
    Postchat Survey
    Your sales staff can rank conversations based on the quality or subject of
    Chat Alert
    Your staff are alerted every time a customer enters a chat through a beeping
    sound on their pc.
    Multiple Chats
    Your staff can have chats with multiple visitors at the same time.
    Chat Transfers
    Your staff can pass a visitor to another staff member to handle their query.
    Operator Interchat
    Your staff can contact each other instantly with any queries they may have.
    Multiple Operators
    You can have multiple staff online using Embedded Chat
    Push Page
    Quite often you will have a web visitor who cant navigate to a particular
    page on your website. Using Embedded Chat you can push the page to them so
    all they have to do is to click the link and they are there. Quite a number
    of our clients use this to encourage their web visitors to register for a
    particular product.
    Hosted Software
    The chat interface can be loaded onto our server so that you don't have to
    do anything more than place the live chat button on your web pages. In fact,
    we can also do this for you if you don't have time. We also have a non
    hosted version which can be hosted by you on your servers.
    Offline Email Form
    Allow your visitors to leave a message if you are not signed in as an
    operator. This message will be forwarded directly to your e-mail box.
    Alternatively we also have the option of answering the chats for you after
    hours too.
    Customisable interface
    This feature brings a little flare as it allows you o customise the look and
    feel of your interface in seconds changing the colour of the interface, the
    graphics and the fonts in the conversation with customizable colours, font
    types, and sizes. Available for operator and visitor fonts.
    Browser Compatibility
    Embedded Chat is compatible with all browsers ensuring that you don't have
    any frustrated chatter trying to get through.
    Visitor history
    Click the name of the visitor and see the past chats they had with your
    Typing indicator
    A 'operator is typing' message indicator will appear which allows the other
    party to know when you are typing.
    Return Visitor Recognition
    When customers connect with a chat, their network IP addresses are recorded.
    When customers return, their presence is detected and prior chat histories
    can be instantly accessed.
    Chat Invite
    You can now invite your web browsers into a chat in real manually or
    automatically. This boosts interaction between your company and your website
    Visitor Monitoring
    You can now monitor your website visitors in real time, see what web page
    they are on, what search engine they came from and what keywords they used.

  • HP Laserjet P1006 suddenly quit printing wirelessly - in between print jobs. Instantly.

    Hi - 
    I used to be able to print wirelessly from my macbook Pro (OSX 10.8.3) to my Laserjet P1006.
    I can still print if I plug in via USB, but as soon as I unplug, the "print and scan" window says my printer is offline.  
    I was inbetween print jobs when suddenly the printer stopped allowing my computer to print wirelessly.  There was nothing I could see that would have set it off.
    I have tried shutting everything down (computer and printer, even wireless router)  and turning back on.
    I have tried telling computer not to remember printer... then connecting again with USB to get it to recognize as new.  That didn't work.
    I tried to follow instructions for MAC and for this specific printer from a post someone else made, but the instructions said to hit utility from the "Open Print Queue" window and I didn't have that option.  It also said to look for Bonjour, I didnt' have that option.
    I'm frazzled.  
    How can I get my wireless connection back?
    This question was solved.
    View Solution.

    Teh Laserjet P1006 is a USB only printer and does not provide any wireless connection:
    May you connected the pritner to a print server (a USB port of a router, etc.) in the past? yje specific model does not support any connection without using a USB.
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HT3669 Why must I Cycle Printer Power and RECONNECT the USB Cable between Print Jobs? [ hp LJ 3030 PCL 4/5 ]

    Until recently, I was able to Print across my LAN.  Now I can only print (1) job at a time through the USB interface on my MacBook Air w/ OS X 10.8.4
    I don't do a LOT of printing, so it could have started in a prior update.

    USB interface? Are you using one of those USB to parallel adapter cables?
    They don't allow two-way comm - which is how the printer tells the computer "done with this page."
    You can try this special USB driver that deals with this problem:
    Any reason you stopped using network printing?

  • P3005 prints two letters top left before print job- Help Pls.

    It just started doing it and it doesn't happen all the time either. It's very frustrating when I am printing cheques and the first cheque gets used with just two letters in the top left and then the actual print job starts with the second cheque.
    I've tried uninstalling the printer and re-installing it but that doesn't help. It's not consistant either.
    It also has started happening on another co-workers printer a HP 4250. These printers are not networked and are hooked up to our PC's (Windows XP).
    I am the tech guy for our hotel but not a professional and I can't figure it out. No settings have been changed.

    You can have the msgsend calss as an utility class
    with out a main method. Change the main method to
    some other name like sendMessage.
    import that class in your servlet email2.
    If msgsend is in a package, you can do import somepackage.msgsend
    msgsend emailMes =new msgsend(filename);
    Hope this helps.

  • Acrobat X Pro 10.1.6 (on Mac OS 10.7.5) hang error, cannot print. HELP!!!!!

    Every time I try to print a pdf (regardless of which printer I use, regardless of whether printer is networked or directly connected), I end up with that lovely little pinwheel, spinning endlessly...and have to force quit.  Each time I receive the following error (it's actually quite a bit longer, but hopefully this will be enough):
    Date/Time:       2013-03-19 15:19:31 -0400
    OS Version:      10.7.5 (Build 11G63)
    Architecture:    x86_64
    Report Version:  9
    Command:         Acrobat
    Path:            /Applications/Adobe Acrobat X Pro/Adobe Acrobat
    Version:         10.1.6 (10.1.6)
    Parent:          launchd [144]
    PID:             11388
    Event:           hang
    Duration:        0.98s
    Steps:           10 (100ms sampling interval)
    Pageins:         1
    Pageouts:        0
    Process:         AdobeAcrobat [11388]
    Path:            /Applications/Adobe Acrobat X Pro/Adobe Acrobat
    Architecture:    i386
    UID:             501
      Thread 0x24393    
      User stack:
        10 start + 54 (in AdobeAcrobat) [0x1e16]
          10 main + 94 (in AdobeAcrobat) [0x1e92]
            10 RunAcrobat + 316 (in Acrobat) [0xf6e9]
              10 RunAcrobat + 6882 (in Acrobat) [0x1108f]
                10 -[NSApplication run] + 911 (in AppKit) [0x94e7cac1]
                  10 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 113 (in AppKit) [0x94e80752]
                    10 _DPSNextEvent + 2196 (in AppKit) [0x94e814d6]
                      10 _NSHandleCarbonMenuEvent + 302 (in AppKit) [0x94ef0bd2]
                        10 _HandleMenuSelection + 53 (in HIToolbox) [0x92df57a9]
                          10 _HandleMenuSelection2 + 636 (in HIToolbox) [0x92df5a2a]
                            10 _ZL14MenuSelectCoreP8MenuData5PointdmPP13OpaqueMenuRefPt + 608 (in HIToolbox) [0x92f8e88c]
                              10 _ZL19FinishMenuSelectionP13SelectionDataP10MenuResultS2_ + 129 (in HIToolbox) [0x92dfdd79]
                                10 SendMenuItemSelectedEvent + 275 (in HIToolbox) [0x92f9d98d]
                                  10 SendMenuCommandWithContextAndModifiers + 70 (in HIToolbox) [0x92f3213a]
                                    10 _ZL18SendHICommandEventmPK9HICommandmmhPKvP20OpaqueEventTargetRefS5_PP14OpaqueEventRef + 482 (in HIToolbox) [0x92f320d0]
                                      10 SendEventToEventTarget + 76 (in HIToolbox) [0x92dc1571]
                                        10 _ZL30SendEventToEventTargetInternalP14OpaqueEventRefP20OpaqueEventTargetRefP14HandlerCall Rec + 482 (in HIToolbox) [0x92dac790]
                                          10 _ZL23DispatchEventToHandlersP14EventTargetRecP14OpaqueEventRefP14HandlerCallRec + 1602 (in HIToolbox) [0x92dad313]
                                            10 _InvokeEventHandlerUPP(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*, long (*)(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*)) + 36 (in HIToolbox) [0x92f31c0c]
                                              10 NSSLMMenuEventHandler + 452 (in AppKit) [0x94ff3246]
                                                10 -[NSCarbonMenuImpl _carbonCommandProcessEvent:handlerCallRef:] + 172 (in AppKit) [0x951c3670]
                                                  10 -[NSMenuItem _internalPerformActionThroughMenuIfPossible] + 106 (in AppKit) [0x9535d15b]
                                                    10 -[NSMenu _internalPerformActionForItemAtIndex:] + 45 (in AppKit) [0x95358f2a]
                                                      10 -[NSMenu performActionForItemAtIndex:] + 65 (in AppKit) [0x95358ef7]
                                                        10 -[NSMenu _performActionWithHighlightingForItemAtIndex:sendAccessibilityNotification:] + 79 (in AppKit) [0x9507cfb5]
                                                          10 -[NSCarbonMenuImpl performActionWithHighlightingForItemAtIndex:] + 171 (in AppKit) [0x9507d92c]
                                                            10 -[NSMenuItem _corePerformAction] + 536 (in AppKit) [0x9507dcaf]
                                                              10 -[NSApplication sendAction:to:from:] + 232 (in AppKit) [0x94f8a663]
                                                                10 -[NSObject performSelector:withObject:] + 65 (in CoreFoundation) [0x94d39d11]
                                                                  10 RunAcrobat + 3588833 (in Acrobat) [0x37b88e]
                                                                    10 AcroSecurityBailOutImpl + 8153358 (in Acrobat) [0xbaf692]
                                                                      10 AcroSecurityBailOutImpl + 8154090 (in Acrobat) [0xbaf96e]
                                                                        10 AcroSecurityBailOutImpl + 2542968 (in Acrobat) [0x655afc]
                                                                          10 AcroSecurityBailOutImpl + 2542642 (in Acrobat) [0x6559b6]
                                                                            10 AcroSecurityBailOutImpl + 5417095 (in Acrobat) [0x91360b]
                                                                              10 AcroPluginMain + 782039 (in AcroForm) [0x10d890ba]
                                                                                10 AcroSecurityBailOutImpl + 2271048 (in Acrobat) [0x6134cc]
                                                                                  10 AcroSecurityBailOutImpl + 3050005 (in Acrobat) [0x6d1799]
                                                                                    10 RunAcrobatInBrowser + 205633 (in Acrobat) [0x3d1af4]
                                                                                      10 RunAcrobatInBrowser + 205349 (in Acrobat) [0x3d19d8]
                                                                                        10 RunAcrobatInBrowser + 204426 (in Acrobat) [0x3d163d]
                                                                                          10 RunAcrobatInBrowser + 203363 (in Acrobat) [0x3d1216]
                                                                                            10 AcroSecurityBailOutImpl + 13290264 (in Acrobat) [0x109589c]
                                                                                              10 AcroSecurityBailOutImpl + 13283688 (in Acrobat) [0x1093eec]
                                                                                                 10 AcroSecurityBailOutImpl + 13999294 (in Acrobat) [0x1142a42]
                                                                                                   10 AcroSecurityBailOutImpl + 13264679 (in Acrobat) [0x108f4ab]
                                                                                                     10 AcroSecurityBailOutImpl + 11772998 (in Acrobat) [0xf231ca]
                                                                                                       10 AcroSecurityBailOutImpl + 11762573 (in Acrobat) [0xf20911]
                                                                                                         10 AcroSecurityBailOutImpl + 13151615 (in Acrobat) [0x1073b03]
                                                                                                           10 RunAcrobat + 1978006 (in Acrobat) [0x1f2443]
                                                                                                             10 RunAcrobat + 1978381 (in Acrobat) [0x1f25ba]
                                                                                                               10 RunAcrobat + 1978854 (in Acrobat) [0x1f2793]
                                                                                                                 10 RunAcrobat + 1980833 (in Acrobat) [0x1f2f4e]
                                                                                                                   10 RunAcrobat + 1981447 (in Acrobat) [0x1f31b4]
                                                                                                                     10 RunAcrobat + 1983253 (in Acrobat) [0x1f38c2]
                                                                                                                       10 AGMInitialize + 320546 (in AdobeAGM) [0x2114ee4]
                                                                                                                         10 AGMInitialize + 324139 (in AdobeAGM) [0x2115ced]
                                                                                                                           10 AGMTerminate + 2793417 (in AdobeAGM) [0x23e8c78]

    thanks a lot for your reply! It is helpful! (although not "solved" - alas).
    The thing still doesn't work: maybe I missed some magic trick?
    If you bear with me, here is what I did:
    a) downloaded
    (from "Java SE Development Kit Documentation 6"
    -- it was unzipped automatically by my Safari downloader, creating the "docs" directory);
    b) then I pointed the Netnbeans to this dir (it says "Add ZIP/Folder", so to my understanding the "dir" should work, only faster), --
    -- still "Show Javadoc" results in "Cannot perform"... (:-.
    Anything I did terribly wrong?
    Note that I stared at the for a while before finding the "documentation" link.
    Noticeable also that the page starts with "What Java Do I Need?" but doesn't answer that question.
    Why does Sun make it so freaking hard for the beginners?..
    Does it make sence to ship something without documentation?..
    Why doesn't Apple distribution include it for 1.6 although it does for 1.5 and 1.4?..
    Why do creators of Java not care that Java actually works out of the box, -- including (and that I think makes my question a Java question) in one of the two most popular Java IDEs?
    (The last few sentences are mostly for flounder).

  • Canon mf8580 was working with my iMac and not all print jobs say.....print job was not accepted

    can u help

    Hi mg!
    I recommend deleting and adding the printer back to the print queue, by following the instructions below:
    1. Open [System Preferences] -> click [Printers & Scanners].
    2.  Select the MF8500 Series, and then click the [-] sign under the printer.
    3.  Restart the computer, and then return to the [System Preferences] > [Printers & Scanners] window.
    4.  Click the [+] to add the printer.  Select [Select Printer Software] under [Use], and then select the [Canon MF8500 Series].
    5.  Print a document.
    I hope this information is helpful to you.  Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Print job help puttin two movieclips on the one page.

    I am using the printjob function to print off a movieclip,
    however.. i need to print off another movieclip on the same page
    and cant seem to do it, how is it done? currently my code is like
    pj.addPage(cert, {xMin:-400, xMax:600, yMin:-400, yMax:800});
    my instance name for my other movieclip is "white"

    What do you want then? Can you describe how you like to position the text?
    In word processing document you can use layout breaks and column beaks to get two text columns beside each other.
    You can also use text boxes, one for each language. You can even use Shapes as text boxes.

  • HP DeskJet D1660 hangs in the middle of a print job?

    My HP DeskJet D1660 occasionally hangs in the middle of a print job.  No error message appears but the light in the power button is blinking.  I have tried opening the printer queue and deleting the job.  The queue switches from status "printing" to status "deleting" and hangs with the queue never deleting the print job.
    Solutions tried: turning off printer, unplugging printer, unplugging and replugging the USB cable.  None of these clears the queue or restarts the printer.  Restarting the machine also did not unclog the queue initially, however, after a lot of cable unpluging I got it cleared and was able to use the printer again.
    Today It stopped in the middle of a print job again this time with an Excel spreadsheet (the first was printing a web page).  After trying some of the same fixes again but before powering down the computer I somehow got the HP Guided Solution up (I"m not sure what I did to trigger it).  Using this help system I managed to get the queue unclogged and the printer up and running following about ten different steps.
    Why is this problem starting to reoccur.  Is there a permanent fix or will I have to struggle thru the process of stopping and starting the print spooler every time it happens.

    Hi hp_issed & TXGabe,
    I understand that both of your HP Officejet Pro 8600 printers are not able to print correctly and quit in the middle of jobs.
    What is the firmware version of the printer? click here to find out how to retrieve it.
    Which Windows operating system are you running?
    Is the printer connected via USB, ethernet or wireless?
    Is the power to the printer connected directly into a wall outlet or a surge protector?
    Thank you,
    I worked on behalf of HP.

  • HP LaserJet Pro M1217nfw Multifunction Printer –job prints repeatedly by AirPrint from iOS 6 devices

    HP would like to make customers aware of an issue with its LJ M1217nfw and LJ M1218nfs printers. When using AirPrint from an iOS 6 device (e.g. iPhone or iPad) with the iOS 6 OS, the print job will print continuously unless the customer cancels the job manually.
    The reason: the latest FW available on (version 20120901) does not support AirPrint from Apple iOS devices (e.g., iPhone or iPad) with iOS6 OS. This will be fixed in the next version of firmware.
    To avoid this issue, please use this workaround while waiting of the fix in the next release of FW. The previous verion of FW (version20120206) for M1217nfw does not have this issue.
    To deal with this issue, customer can select any one of the operations to terminate the print job:
    Cancel job manually in ‘Print Center’ from  iOS device
    Double –click the Home button to display recently used apps
    Swipe left or right to find ‘Print Center’
    Tap ‘Printer Center’ and click ‘Cancel Printing’
    Another option is to Power Cycle the printer.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution
    This question was solved.
    View Solution.

    The lastest FW (FW 20130125) has been posted and fixed the above issue. Please download the lastest FW at:
    m1217nfw FW link
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • HP 6110 All-in-one no longer prints...print jobs sit in queue

    My printer worked fine last week and now I went to print somethign and it just sits in queue.  I tried uninstalling/reinstalling the drivers, running the HP Diagnostic (which says everything seems fine) but nothing prints.   Any ideas on how to get this working again?  I also tried to print on my other laptop and that doesn't work either - so it's not an issue with this particular computer.
    Any ideas would be greatly appreciated!

    I have a similar problem but only with my vista pc.  All print jobs sit in the queue, don't print.  No problem printing on my mac.  Please jhelp!

  • Direct printing, disable queuing of print jobs

    I have some label printers that are connected to touch screen macs that we use for checking people in, setup like a kiosk. I would like to have it print directly to the printer without them being queued up on the mac. When the labels run out or jam, dozens of jobs get stuck in the queue, and you can't tell it by looking at the computer (dock is hidden). My preference is that when that happens, the computer would instead of adding to the backed up queue, it would hang on the print job and would not allow any more activity on the computer until the printer was attended to. So what I am asking is: Is there a way like in the "old days" of mac, is to directly print to a printer without it going to the queue first?

    Short answer - no.

  • Cannot cancel print job on network B9180

    I have a B9180 network connected printer with an IP number. A print job is registered and cannot be printed or cancelled from the computer that created the job. I have cancelled the job on the printer using the X button because it would not cancel from the computer.. The computer has been restarted, but the print job is still registered in the printer cue (Vista 64) for the printer.  I can select the job and select cancel, the printer says it is cancelling, but does not complete the cancel.
    I cannot print any new jobs due to the bad job shown in the cue.
    Can someone tell me how can I cancel the bad print job and clear the cue on the computer? I have tried everything I know.

    By Pravin Chalise
    Big Computer, Kirtipur, Kathmandu, Nepal
    Please go through instructions carefully:
    Ist Method:
    a) Open your computer and go to printer (control pannl (your printer))
    b) Double click printer icon. It lists all the print jobs.
    c) Right click your que job>choose 'Delete' or 'Cancle'
    2nd Method:
    a) Go to spool folder eg: C:\WINDOWS\system32\spool\PRINTERS (in most cases)
    b) select all jobs which are in que.... and simply delete them.
    Thanks !!
    (tested on my computer at Canon LBP 2900)

Maybe you are looking for

  • *SOLUTION* to (at least some) "HP Scanjet Pro" problems in 10.6

    Good day to everyone! I have found a workaround for the problems experienced by people attempting to use HP Scanjet scanners (at least the 4850, which is what I use, I suspect greatly this will work for others as well). Basically it is to install the

  • Instead of requested page source code is getting populated in WAS

    Hi All, I'm trying to bring up an application using jnlp.please find below the source code for the same. When i deploy the application in WAS, i'm able to bring up the application without any issue. But other than if i deploy the same

  • How to send message to direct connected users

    Hi, I am working on a text Chat application with FMS4 "RTMFP" connection and i am looking a functionality to send direct message to one to another peer, please some one help me. Thanks Sushil

  • How to force Adobe Reader to remember window size

    Hi I need Adobe Reader to remember window size and placement. I work on a remote desktop enlarged into two screens and i need Adobe Reader to open on one of them, but default settings open window in the middle of the screen so half of window is one o

  • 4G iPod Touch won't restore.

    I bought a 32g iPod Touch 4g last night. I was using it for an hour or 2, downloading iBook, checking Facebook and the camara when it froze and restarted. Now, when I plug it into my computer, iTunes tells me it needs restoring, so I click restore. I