Header tax conditions....sum of all item level condition

Dear Gurus,
I do get item level conditions using KONV.
Now as per my requirement, I need all these item wise taxes summed up at header level.
i.e total tax per condition per item.
Please help me.
Regards,
Roshan Lilaram.

Dear Anil,
I will get these details item wise.
I need all these together.
If i have three items then at the header level i get the total of all these three items.
I hope i am making my issue clear.
Regards,
Roshan Lilaram.

Similar Messages

Header tax conditions

hi,
i doing smartform lb_bil_invoice.
i need to diplay header tax conditions.
how can get these details .

Hi,
Generally for calculating the tax we doi t from the tables KONV-Conditions (Transaction Data) AND
KONP-Conditions (Item).
KONV and KONP tables are both conditions tables. These tables are used when you want to find e.g : the Basic price value or excise duty values (just to name some ) .
These tales store the values based on the document condition number.
The Document Consition number(KONV-KNUMV) is number that gets generated whenever a PO or a sales order gets created. So this KNUMV is the link between the PO or the sales order. The KNUMV gets stored in KONV as well as the header tables of Sales order and Purchase order.
Let me give you an example: Incase you have a sales order number say 1206 now for this you want to create to know what is the Basic price: - so you would go to VBAK get the KNUMV of 1206 , for the KNUMV fetched go to KONV and give this KNUMV you will get all the conditions for this sales order. Same is the case with PO's also.
Now KONP also stores the conditions can be used with access sequences eg a003 or a055 etc. you cantake the KNUMH value from these tables and get the rate from KONP.This table only stores the rates and not the values. i.e KBETR value and not KWERT value.
Thanks
Vikranth

Heading showing as SUM on aggregate items

Hi All,
In some of the HR analysis folders, items in folders such as "Length of Work Analysis" have a default aggregate of sum and no heading specified in the properties if the item in the EUL. When used in a report the heading defaults to "SUM". In this particular folder I can get over this by adding a heading to the item properties and this is then picked up in the report. However, for another folder (Age Analysis) where the same problem occurs, the exact same fix does not make any difference to the heading displayed. i.e. the Heading still shows "SUM". All other properties of the item are the same as the item for which the fix worked (e.g. datatype, format mask, default position etc)
Any ideas?
Is it something to do with the way the different view are written, as this is the only variable I can see
Thanks,
Emily

If the songs have been changed then it will be the rights-holder/content provider that have changed them - unless they are a number of years old. But I wouldn't expect them to show as being available for download if you still have them in your library, you usually have to delete the previous download (or not having the version that was downloaded e.g. having converted it to MP3) for it show as available for download
There is nothing else that looks different between the tracks, all their other properties are the same ?

WHT (Witholding Tax / TDS) at PO line item level

Hi
There is one new functionality in SAP where i can enter WHT (Witholding Tax / TDS) at PO line item level. This functionality is introduced by SAP.
I searched PO line item for WHT code field in PO. But i didn't got this field. Please let me know how can i activate WHT field in PO line item level itself.
We are on SAP EHP5.

Dear Deepak,
WHT is basically add in vendor when you are creating. Goto XK03 select he WHT view.
for more information please check following URL
http://sapdocs.info/sap/fico/sap-extended-withholding-tax-configuration/
Regards,
PK.

GL Account details at the header are not flowing to the item level in SC

Hi All,
While creating a Shopping Cart, first I am specifying the cost assignment details (i.e., Cost Center, GL Account) in the header and then creating the line items for the shopping Cart.
While creating these line items, the cost center which is specified in the header is populated at the line item, but GL Account is blank.
I need to populate the same GL Account at each line item.
I checked the badi: <b>BBP_DETERMINE_ACCT</b> to populate the GL account for line items. But I am unable to determine this header GL Account in this badi.
Can anybody help me in this regard, <b>thanks in advance</b>.
Regards
Loknath

Hi
<b>The purpose of the BADI - BBP_DETERMINE_ACCT is to deal with Shopping cart - Item level data, there it contains only two tables
ITEM_DATA
This contains the most important item data for the shopping cart.
ACCT_DATA
This contains the account assignment data for the shopping cart item.</b>
<u>Here is the documentation.</u>
<b>BBP_DETERMINE_ACCT</b>
You can use the Business Add-In BBP_DETERMINE_ACCT to specify your own criteria for determining the G/L account.
In the standard system, the G/L account is determined using the product category and the account assignment type, refer to Define G/L Account for Product Category and Account Assignment Category.
The G/L account is then placed in field ACCT_DATA-G_L_ACCT. Then, the system calls the Business Add-In BBP_DTERMINE_ACCT.
In method DETERMINE_ACCOUNT, two table parameters are available:
ITEM_DATA
This contains the most important item data for the shopping cart.
ACCT_DATA
This contains the account assignment data for the shopping cart item.
This means that you can now determine the G/L account irrespective of other item data (or any combination of item data) and overwrite field ACCT_DATA-G_L_ACCT.
Example
For the product category OFFICE SUPPLIES in conjunction with account assignment type CC (cost center), the system determines G/L account 400000. However, you also want to take into account the company code (field ITEM_DATA-CO_CODE) when determining the G/L account. The system is to make postings to G/L account 410000 for company code 0002. So you overwrite field ACCT_DATA-G_L_ACCT with 410000.
<u>I recommend, In future, Please read the relevant documetation of any of the BADIs in SE18 Transaction, before implemnting the same, to get the details.</u>
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

TAX values in the line item level of PO

Hi
I am printing the PO form. I need to dispaly the tax values that is coming in the line item level.
Can any one tell me where i will get these values.
For every line item in the PO under the tab INVOICE we have the tax code and tax jurisdiction. Near to that there is a push button TAXES.. I need to fetch the values maintained under this.. Based on the condtion type,,
Regards
Ansari
Edited by: Muhammed Ansari Abubekkar on Aug 27, 2009 3:46 PM

Hi ,
I have tried this option. But it does not give me the values on the basis of condition types. it gives only the totals.
I am using ECC 6.0.. That button may be configuration dependent.
Regards
Ansari

ME21N Copy header Z delivery date on to item level

Dear Friends,
We add one field for expected date of arrival in header of ME21n.
My requirement is whenever we put this value and press enter it should reflect
item level delivery date .
How can we achive this thing.
Any help will be highly Appricated.
Regards
Naeem

Hi
Try implementing BADI ME_PROCESS_PO_CUST use PROCESS_ITEM.
data : ls_mepoitem type mepoitem. "Purchase Order
data :ls_header type ref to if_purchase_order_mm,
ls_data_header type mepoheader.
ls_header = im_item->get_header( ).
ls_data_header = ls_header->get_data( ).
ls_mepoitem = im_item->get_data( ).
ls_mepoitem-eindt = ls_data_header-zeindt.
im_item->set_data( ls_mepoitem )
Shiva

Summing of all Items in PO

Moved to correct forum by moderator
Hi Experts,
I want to sum all the Item price in script. How can i do that.
Regards,
Ramana
Edited by: Matt on Nov 7, 2008 1:10 PM

Inside a subroutine, Just Sum field NETWR from table EKPO with the current PO Number.
But this is exclusive of taxes.
Select sum( netwr ) from ekpo into lv_netwr where ebeln = 'PO Number'.
Regards
Karthik D

HOW TO INPUT TAX CODE AT MULTIPLE PO ITEM LEVEL AT A TIME

If a PO is having 100 line of items, how to input the tax code for all line items at a time, if tax code for all line of times is same.

Hi
Another option is to use the t-code MASS. I havenu2019t used in PO but I think it must run.
Select BUS2012 in u201CObject Typeu201D field. Press F8.
Select u201CPurchase Order Itemu201D in u201CTablesu201D tab, and click on the u201CFieldsu201D tab.
Select the field name MASSEKPO-MWSKZ. Press F8.
Assign the value to the PO field.
In the menu, select u201CMass maintenanceu201D->u201DEnter new field valuesu201D.
Assign the new value and press u201CTranferu201D button.
Press F8. Click on the u201CCarry out a Mass Changeu201D button and click on the u201CSaveu201D button (Ctrl+S)
Review the u201CMessages from the Update Tasku201D.
Best regards.
Paco M

PO number prints only if it is at header level not for item level

Hi All,
I am not able to print the PO number in my order acknowledgement and COA printout when I enter the PO number in the sales order at item level of only. It prints fine when it is at the header level.
Please assist.
Thank you,
Shanu Jain

Hi,
BSTKD Field in the VBKD is dependent on two things . IF the Header PO Number is same as the Item number if u change at Header level it will be changed at all items level also. If both are diff then if u change the PO Number at Header level it will change PO numbers of the Items which is having same value as Header Po Number otherwise it wont change the Item PO Number .
Ex " Order Number 1000 is having PO Number at Header Level is PO1. And the sales order is having Item 010 and 020.
IF Item 010 and 020 is having PO1 at item level if u change the value of PO1 at header Level if will be applicable to items 010 and 020.
If Item 010 is having Po Number PO1 and 020 is having PO2, if i change value of PO number at header to PO3 then it will change Item 010 PO Number to PO3 and Item 020 PO Number will be same as PO2.
Try to Take The VBKD - BSTKD where Item Number POSNR is blank that means Header PO Number .
IF u want Item Po Number then pass the item number in POSNR and get it.
Regards,
Srinivas.

Different division at header and item level in Order

Hi Gurus,
i am facing this issue where while creating quotation in CRM i entered sold to party, selected the org data ( OA/DI/OP ). i entered the product with quantity. now at item level in Organization tab my sales area is showing as ( OA/DI/01). system is picking the division maintained for product which is 01) so division is different at header and item level. i need the header division to be used at item level as well.
how can i achieve this?
Thanks and Regards
Sudhir Grover

Hi Sudhir,
Make sure the settings in the SPRO>CRM>Master Data>Products>Special Settings for Sales Operations--> Define Division settings is activated with Header Div. Act.
Also check the details in the IMG activity documentation for define division settings.
Hope this helps.
Regards,
Chandrakant

Different payment term at header and item level

Hi,
In sales order(VA03) we r getting different payment term for header and item.
Eg: For header we get MZ30 and for item level MZ60.
It's only for a particular material. I have been asked to find out why? Any thoughts?
Thanks in advance
Chesat

Hi Lakshmi,
Where do we maintain this entry to reflect this change.

Header Discount Condition type Control data

Dear All,
            I Maintained Header and Item discounts and frieght condition type and in header level the system is not calculating header discount or frieght for all items but its taking as item only.
       I think i made some wrong entry in condition type control data so please suggest me what should be maintained.

hi,
Might be you have maintained Caluculation Type as B     Fixed amount
I think you should mainatin it as C Quantity

Sum child list items and update parent total using javascript

I have a SharePoint 2010 Parent/Child list setup using a lookup field to join both the lists, this is working well.
The Parent list contains requisition requests and the child list contains related item details. Each of the related child list items has a 'Line Item Total' field. I need to aggregate the Line Item Totals in the child list and place the result in a 'Requisition
Total' in the parent. So for any given parent record the sum of it's related child 'Line Item Totals' is reflected in the 'Requisition' total in the parent row.
I am struggling with the JavaScript code below. I am trying to aggregate Line Item Totals for a given Requisition#? Could someone please review and advise?
<script language="javascript" src="/Purchasing/Documents/jquery-1.8.2.js" type="text/javascript"></script>
<script language="javascript" src="/Purchasing/Documents/jquery.SPServices-2014.01.min.js" type="text/javascript"></script>
<script>
$(document).ready(function()
$('select[title=Requisition#]').children().attr('disabled',true);
$("input[title='Old Amount']").attr("readonly","true").css('background-color','#F6F6F6');
   // Retrieve the name of the selected parent item.
   var strParent=$("select[title$='Requisition#'] :selected").text();
splist li = web.lists["ReqDetails"]; // This is the child list
    spquery q = new spquery();
    q.Query= "<Where>" +
     "<And>" +
      "<Neq>" +
       "<FieldRef Name='ID'/><Value Type='Number'>0</Value>" +
      "</Neq>" +
      "<eq>" +
       "<FieldRef Name='LinkID'/><Value Type='Number'>ReqID</Value>" +
      "</eq>" +
     "<And>" +
    "</Where>" +
    "<OrderBy>" +
     "<FieldRef Name='LineItemTotal'/>" +
    "</OrderBy>"
    q.ViewFields = string.Concat("<FieldRef Name='LineItemTotal' />");
    q.ViewFieldsOnly = true; // Fetch only the data that we need
    splistitemcollection items = li.getitems(q);
    foreach(SPListItem item in items)
    sum += parseInt(item["LineItemTotal"], 10);
  alert(sum)
</script>
Rick Rofe

I do something similar for a PO Header/PO Detail set of lists. I use SPServices to pull the data.
I put this code in the child edit page - so any time any child is edited, the parent is updated. I get all children records and total them up (except for the item I'm displaying at the current time. I add that value in directly from the form itself.
<script type="text/javascript" src="/Javascript/JQuery/JQueryMin-1.11.1.js"></script>
<script src="/Javascript/JQuery/jquery.SPServices-2014.01.min.js"></script>
<script>var poNumber = '';
var poDetailID = '';
$(document).ready(function() { var queryStringVals = $().SPServices.SPGetQueryString();
poNumber = queryStringVals["PO"];
poDetailID = queryStringVals["ID"];
function PreSaveAction() {
// update the PO header with the total of all items + shipping + adjustments
var query = "<Query><Where><And><Eq><FieldRef Name='Title' /><Value Type='Text'>" + poNumber + "</Value></Eq><Neq><FieldRef Name='ID' /><Value Type='Counter'>" + poDetailID + "</Value></Neq></And></Where></Query>";
var viewFields = '<ViewFields><FieldRef Name="Total" />';
viewFields += '</ViewFields>';
var poTotal = 0.00;
$().SPServices({
operation: "GetListItems",
async: false,
listName: "PO Details",
webURL: "/po",
CAMLViewFields: viewFields,
CAMLQuery: query,
completefunc: function (xData, Status) {
//alert(xData.responseText);
$(xData.responseXML).SPFilterNode('z:row').each(function() {
if($(this).attr("ows_Total")) {
//alert($(this).attr("ows_Total"));
poTotal += Number(parseFloat($(this).attr("ows_Total").split(";#")[1],2).toFixed(2));
// add in this changed line (we skipped it above)
var qty = $('input[title="Quantity Ordered"]').val();
var price = $('input[title="Price"]').val().replace(',','');
var extend = Number(qty)*Number(price);
poTotal += extend;
//alert(poTotal);
// update the PO Header
$().SPServices({
operation: "UpdateListItems",
async: false,
listName: "Purchase Orders",
webURL: "/po",
ID: poID,
valuepairs: [["Total", poTotal]],
completefunc: function (xData, Status) {
//alert(xData.responseText);
$(xData.responseXML).SPFilterNode('z:row').each(function() {
return true;
Robin

Necessity of the Partner Determination Procedure at Item Level

Hi Gurus,
What is the necessity of the Partner Determination Procedure at Item Level and in what case it is useful?
Regards,
Sarosh.

Dear,
It may happen that in a business transaction the partner in the document header does not apply to all items, for example, if specific goods for a customer are normally delivered to another ship-to party.
In sales documents and billing documents you can enter one of the deviating partners from the document header at item level.
You have planned to have the partner function in the partner determination procedure for sales document items or billing items.
When creating a document , the system copies the document header partners to the items. If you want to define another partner than the one in the document header at item level, overwrite the proposal from the item partner screen.
You have planned the partner function ship-to party in the partner determination procedure in Customizing for sales document items and have defined this as changeable.
Create a customer sales order as usual.
The system copies the partner from the customer master into the document header and then from the document header into the items.
Select the item, that should receive a deviating partner.
Choose Goto --> Item --> Partners.
The partner screen for the item appears. Here you can overwrite the changeable partner functions.
Try to read the SAP help. U will find some more info.
reward if helpful
Krishna Chaitanya

Header tax conditions....sum of all item level condition

Similar Messages

Maybe you are looking for