Hiding table items in web report when "no applicable data found"

Hi,
i want to hide a complete web item from a web report using web table interface
when i have the situation "no applicable data found".
I cannot use javascript due to requirements in my solution.
can i set some attributes in the START method in the class?
i can see there is an attribute N_NO_DATA which tells if no data is found.
Can i use this in the other methods to hide the complete table including table heading?
Best regards,
Jarle

Hello,
datas are available in the Cube, they are displayed when there is no filter or when only one single value is selected in the filter.
The problem happens when two or more values are selected in the filter.
Example :
The field selected is Profit Center.
Without filter the I can see :
PC1
PC2
PC3
etc...
If I select in filter the value PC1, I can see :
PC1
If I select in filter the value PC2, I can see :
PC2
But If I select in filter the values PC1 and PC2, I can see :
No Applicable Data Found.
BR,
Pedro.

Similar Messages

Bex report issue - no applicable data found when we drill down on free char

Hi All,
We are facing some strange issue with one of the report.
when user run the report for a week (02/02/2009 - 02/08/2009) and then drill down on particular char its working fine (first time).after that when he is trying to change and execute the report for other week on the same instence ( 02/09/2008 - 02/15/2009) by clicking on refresh and passing new values to the variable its showing up correctly at the time of drill down on free char its showing as *no applicable data found.*
when he logoff the system completey and run the report for the week( 02/09/2008 - 02/15/2009) values it is showing up with values even tough he drill down on free char.
issue basically when he was trying to drill on free char by chaging different date values in the same instance by clicking on refreh and by entering diffrent values its showing up as not applicable data found.
but when he enters the values for different weeks each time by closing the system and relogin report is working fine and showing up data eventough he drill down on free char.
Please help me out!

Dear
Please check if any condition or exception you have created for that query.
Or still problem exists check SP level.
Regds,
Sachin J

Report Report Interface: No applicable data found

Hi.
I m using the Report Report Interface and getting:
No applicable data found
while calling in GoTo the second Report.
While removeing the filters threre is data .
What conditions needs to be met that there is data displayed?
Thank You
Martin

Hi,
Please execute the second report separtely with the same filter with which you are getting 'No applicable data found'.
Please check whether executing second report gives you any data with same filter or not.
If it doesn't give , then it means there is no data available to be displayed for that particular filter combination in cube.
In that case you will have to filter the data which is available in cube or need to load the data as required.
Regards,
Amit

Authorizations for WEBI report based on BPC data model

Hi All,
We are strugelling with setting up authorisations for the reporting on BPC data model.
We created Bex query on top of Multiprovider that consists of BPC cube. The Bex query is source for WEBI output. The authorisations has been set up on BPC data model (cube) in BPC application but they are not passed nor to Bex query nor to Webi. Example: The query is build on top of OPEX BPC data model, this data model is restricted based on Oranizational Unit. My test user is allowed to see only Org Unit = 'Australia' in the OPEX BPC data model, however when I'm running the report I can see absolutely everything.
We are not connecting/using any BI cubes itself for this reporting. We are intrested only in the WEBI report based on BPC data models.
We were trying to use BPC data model (without any extra settings) as the source for BEx report, we were also trying to use virtual BPC data model as the source for Bex transient query - but non of these have helped.
Can you please advise how the authorisations should be set up for WEBI reporting on BPC data models?
Kasia

Anybody can help with this issue please?

Show "No Applicable Data Found" for Report 0SD_C01_Q22

Hi Gurus,
I just activated BI Content Report, 0SD_C01_Q22 and it's relevant InfoSource, DataSource and so on. The data from R3 were loaded into the infoCube successfully.
However, it shows "No Applicable Data Found" when I executed the query.
I have tried to create a new query based on the same InfoCube but has NO limitation parameter. However the result was the same.
Can anyone consult out?
Cheers

Hi my friends,
I have tested it with a really simple report that has no selection condition. But the result is the same.
Also, I have checked the data in infoprovider with LISTCUBE but the data are definitely available.
By the way, I test it with an account hazing profiles as SAP_ALL and S_A.SYSTEM. The super user account should have enough authorization.
So my friends, anymore ideas? Pls help out....
Cheers.

Message "No applicable data found" after executing the report

Hi all,
I have 60 records in a cube which is extracted from a function module. I am able to see the data in the cube but when I execute the report I am getting the message u201CNo applicable data foundu201D. Why is that so?
Can any one please explain me what to do to bring data when the report is executed?
When I execute the query there is only one field selection criteria 0P_FPVANT and this is mandatory. When I checked the data in the cube I didn't find any field 0P_FPVANT but I found a field Fiscal Period Variant with the technical name, 0FISPER
I executed the query in RSRT and there also I am getting the same message, "No applicable data found".
Please advise what do I need to do inorder to get data when the report is executed?
Thank you.
Regards,
Pavan.

I think so.
Ok let me take the other report 0FIAR_C02_Q1003. For this report the selection criteria is
Company code,
Customer and
Period/Fiscal Year
Of these only company code is mandatory. In the data in the cube I see that for co. code BP01 data is available. So I executed the report with co. code as BP01 but no data.
Then I gave co. code BP01 and Period /Fiscal year as 2008, 2008.03, still I see no data.
I tried with values in all the fields that are available in cube
co. code - BP01
Customer - PCS-C10
Period/Fiscal Year - 2008011
Now with respect to Period/Fiscal Year selection field in report, in cube there are 4 columns
Fiscal Year Period,
Posting Period,
Fiscal Year Variant and
Fiscal Year
I've tried all of them but when I enter values in all the fields still I am getting the same error, "no applicable data found".
Please advise.
Thank you.
Pavan.

Get postion from vacancy when transfer applicant data

Dear all,
Pls tell me how to get postion from vacancy when transfer applicant data? At the Initial data entry, i chose the advertisement that determine vacancy. But when transfer data, i have to choose the position again.
Best reagrds,
Quanglv

Hi,
IN PB40 enter additional data you assign applicant to position or vacancy, and when u will transfer data to pa position will come automatically...
Regards,
Kapil

Data of measure is not seen in webi report when drill is disabled

Hi
i have created a hierarchy in universe on which i drill down in webi reports
the problem is that i have drilled my report till the last level and saved it
the object on which im drilling is set as a section in the report
so i have added a measure in the table under that section
now the measure has different value at different level of drillings
i.e for the last level of the drill i use one measure and after that as i drill up i use different measure
for all other level of drilling
every thing is working fine but the problem is
when i open report in view mode
the measure data is not seen
only when i enable drill the measure data is seen
i have done something like thi
i have used drillfilters in webi reports for checking which level we are in drill mode so as to display the measure value based on drill level

Seems like DrillFilters needs the drillmode to work fine..
why don't save the report with the drill button enabled?

Using sum on webi report when breaks applied

Hello All,
I have a situation here and would like to get your help. I am using BO R2. I am working on a webi report where I have to apply breaks at different levels (to be precise, I applied at 4 columns on this report). I applied breaks and the results are looking good so far as the main table is sliced to many small tables based on the breaks. But, here comes the issue..
My report contains text as well as numerical columns. I have to do two types of calculations on these numerical columns.
1) When certain condition meets, like here I am working on when the data is from few particular projects, only their numrical columns should sum up and give the results. For example, after applying breaks, say my 200 rows table is sliced to many small tables and I am looking at one particular table that has 10 rows. As per my requirement, I have to pick the values of only 5 rows from this table (as the 5 projects I want are in this table), sum them up and display the results at the end of that table(Only for this table). The problem I am seeing here is, when I add a new row under the table, it is being added to all other sliced tables (which is because of break applied). But, I have to work on data only from one of the tables and that too on limited columns from that table. I do not want to touch other tables. Is this acheivable? Please let me know.
2) This issue is almost similar to the above one. I have three conditions like above to be applied on three different tables which pick only few rows of data and should sum them up. At the end, I need a brand new column all the way at the end of the report that totals up the numbers from only the above conditions' results(results from the 3 condition on 3 different tables).
Not sure if this can be done in webi R2 version. But, if it could be, then please let me know the way to do it. Also, let me know if my question is not clear.
Appreciate your help in advance.
Thanks,
Sandeep.

There seem to be several issues, one being more complex meaning "conditions" applied in the Block within breaks may be difficult to build in a Grand Total Row.
You can create an empty row to use with your Block at the bottom (in fact, once that is created you can create as many as you wish).
1) Remove all Breaks
2) Inset a Sum of one of the Metrics in the Block (doesn't have to make sense)
The inserted sum will create a row at the bottom of the Block. Make sure the new row with the sum does not have any Dimensions you want to Break on in it (it should not).
You can now create your formulas or variables for your Grand totals in that row and it will remain affixed to the table at the bottom. Apply your Breaks as you wish.
You can insert rows above or below that Brand Total row any time now. It is outside the breaks but is a part of the table and very flexible as to use.

How to add A single row at the middle of the table in a Webi report

Hi,
I created a Webi report using Universe(Created universe using bex query).Now i have a requirement to display a row at the middle of a report. Can you please tell me ,how to add a sigle row at the middle of a Webi report.
Thanks in advance
Regards
Monika

Hi Monika,
It is not really possible to add a row (I assume you mean of unrelated data) to the middle of a table in a report. You can add a new table with a single row between two tables. For instance you could add a new one row table, or even single cells which are positioned relatively between two tables. Possibly a block on top of another. But this gets tricky.
Can you explain in more detail what you are trying to do?
Thanks

How to access data from SAP Tables from a Webi report

hi all,
I have a webi report for financial data and from a Bex query which is build on a Cube (this has data from 2 SAP ECC systems)
i want to build a functionality where in i can call some SAP Table data from this webi report. i should be able to pass information or some hard code where it can understand the source system it has to pick data from.
in SAP BI, we have this ption wherein we can achieve this through RRI..
is this possible in Webi ?
Thanks
SKS

Hi.
Create a universe on top of SAP Tables and create a webi report.
Using hyper link /open doc we can call this report from the webi report created on top of your Cube .
@Sri

Hiding refresh button in Webi Report

Hello experts,
I would like to hide 'refresh' button on webi report in XI 3.1. One way to do this is using rights which I don't intend to use at this stage.
Do we have any other way out to do this task?
Many thanks in advance
Regards,
John

Options:
a) roll your own viewer/portal - probably the safest bet, although a bit unwieldy if Infoview works fine and you only want to make this specific change
b) make changes to Infoview's javascript files that render the toolbar buttons - entirely unsupported by SAP as well as a maintenance headache during upgrades
c) ...revisit your reasons for not being able to disable refresh of the report to users - surely there's a security matrix that satisfies your requirement. If there isn't (meaning that, for whatever reason you need these users to refresh against this content area in normal scenarios but want it disabled for this portion of your workflow) - then there are kludgy "work arounds" like adding/removing the user to/from a "no refresh" group you've created in the CMC, programmatically, when running the report(s)
good luck

Creating a Webi report from R/3 Data

Hi Gurus,
We are running SAP ECC6 with EHP5. Is it possible to create a Webi report directly from the R/3 (without BW system). I read some where that it can be achieved with Data Federator.
Any one has an idea ?
Appreciate your help.
Regards,
Munir

pls see this post:
WebI and SAP R/3
Re: Accessing sap tables data and display in webi
rgs,
Parth.
Edited by: Partho Mukherjee on Nov 14, 2011 4:01 PM

No data in WEBI report - but plenty of data in the underlying Bex query...

HI all - I have a problem with my webi queries - which are sometimes breaking...
We run in the XI 3.1 ans SAP int, kit - SP 2 on both.
Sometimes af perfectly well functioning webi report suddenly returns no values - stating that the query didn't find anything. However - if I run the bex query with the same selections I get plenty of data. So there is data. Therefore it might be a Int. kit problem - however, when I bulid a new webi report - similar to the first one, with same dimensions etc. but without all the formatting - It runs fine too!!!!
So it seems like somehow the original webireport has lost the connection to the measueres which it holds - has anyone any idea to what the cause might be and how to fix it?
By the way - I havre refreshed the Universe and there is nothing to update.
BR
Jess

Hi Ingo - the MDX statement from the MDX trace - does not yield any data - However, if I make a similar selection in the BEX, there i data avaiable - so it might be a problem with the how the MDX statement is generated.
I've trouble shooted further and my learnings are so far:
The problem is caused by a combination of 5 dimensions
If you remove either one of the 5 dimensions - the query returnsdata
If you add a specific meausure (a restricted bex key figure) - data is also returned - also in the other measures.
The MDX statement looks like this:
SELECT { [Measures].[D6ZWIC1Q7MOA2YCJM1LAPRQNG], [Measures].[D6ZWIC1Q7MPTG70294GIUMJ70], [Measures].[D6ZWIC1Q7NGQDWFMH0MZ7LEP8], [Measures].[D6ZWIC1Q7NI9R53543I7CG78S], [Measures].[D6ZWIC1Q7NWVQXAK7CQUMKQEK], [Measures].[D6ZWIC1Q7NYF45Y2UFM2RFIY4] } ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [0CALMONTH2].[LEVEL01].MEMBERS, [0REPTT].[LEVEL01].MEMBERS ), [0EMPLSGROUP].[LEVEL01].MEMBERS ), [0PAYSCALEAR].[LEVEL01].MEMBERS ), [0ORGUNIT].[LEVEL01].MEMBERS ), [ZBOORGUNT ORGEH 01].[LEVEL00].MEMBERS ) ON ROWS FROM [ZMPHPTGL1/ZDQHPTMN1] SAP VARIABLES [0P_CALMO] INCLUDING [0CALMONTH2].[12] [0P_CALYE] INCLUDING [0CALYEAR].[2009]
Where all the measures in fact are restricted keyfigures from the Bex query. The dimensions are business content characteristics, as are the variables used.
The above MDX statement returns nothing - but if you remover either one of the dimensions in the cross joins - the expected data is returned.
Any ideas to why that happens?
BR
Jess

Define a join in Webi Report which gets the data from two Excel files

Hello,
I have the following excel records as a source for my Webi Report:
Excel 1
Excel 2
Date
Month
Month
Year
Year
Total Number of Days
in Month
No. Of Exec
Functional
Area
Now I need to show No. of executions/Total Number of Days in Month per functional area (Where Month of Excel 1 is Month of Excel 2).
For this:
I have Merged, Month of Excel 1 and Month of Excel 2, Year of Excel 1 and Year of Excel 2.
Created a variable vNoofExec , No. of Exec/Total Number of Days in Month.
Created a graph, with Merged Month, Merged Year, vNoofExec with Region Color on 'Functional Area'.
But, it doesn't work.
If I replace vNoofExec with No. Of Exec I get the data, but not with vNoofExec.
Any Idea how we can get a solution for this?
Best regards,
Praveen.

Hi Amit,
Thank you for your reply.
I tried putting them in a table to see if I am getting the value for vNoofExec but, no, I am not getting. Here is the dummy data for both the excels:
1. Excel 1:
Year
Month
Week
Date
No. Of Exec
Functional Area
2013
1
30
26
1
FA1
2013
2
21
20
12
FA2
2013
3
21
21
1
FA3
2013
4
21
22
5
FA4
2013
5
21
23
2
FA5
2. Excel 2:
Year
Month
TotalDays
2013
1
31
2013
2
28
2013
3
31
2013
4
30
2013
5
31
What I found is, if I create a measure like, [No. of Exec] where ([Functional Area]="FA1") and use this measure in the graph I am able to see the data even if I use Total Days in the Graph, but, I cannot create multiple measures like this because for me number of Functional Areas will be changing always.

Hiding table items in web report when "no applicable data found"

Similar Messages

Maybe you are looking for