How can I display and change built-in symbols of a tree control programmatically?

I want to set the built-in symbols of a tree control during runtime.
I only found an example to assign custom pictures but not how to select one of the 40 built-in symbol.
Many Thanks 
Solved!
Go to Solution.

The ActiveItem.SymbolIndex will allow you to select the symbol for the active item. You can use the ListBox Symbol Ring Constant (Dialog and User Interface palette) to select a symbol (or you can just enter the number directly if you know what it is).
Message Edited by smercurio_fc on 07-10-2008 09:36 AM
Attachments:
Example_VI_BD6.png ‏2 KB

Similar Messages

  • How can I display a changing variable in a subvi on the front panel of the main vi as the subvi is excuting

    In the document attached the vi on the right is sub to the vi on the left. On the subvi on the right the variable "Field Reading" is continuously updated on the front panel of the subvi as the "for" loop is executed, but only the last value of the variable is updated on the main vi front panel which is what is expected. My question is how can I display the changing value of "Field Reading" on the main vi front panel as the "for" loop in the subvi is running?
    Thank you.
    Solved!
    Go to Solution.
    Attachments:
    Doc2.docx ‏554 KB

    Hopefully I can explain it well enough. It really is simple.
    1) Create an empty global variable and call it something like User Interface References.vi
    2) For each and every control and indicator on your front panel, right-click and select Create/Reference
    3) Place these references wherever you like (I use a series of Event cases to perform my initialisation and these all live in one of these event cases). They can be placed anywhere in the main vi.
    4) For each of the references, right-click and select Create/Indicator
    5) Moving to the front panel, Cut all the indicators and Paste them in the global variable (eg. User Interface References.vi)
    6) Moving back to the block diagram, wire the global variable to each of the references and select the same named global variable.
    All the hard work is now done (until you add another user interface terminal). You should now have something that look as shown below, [except the reference labels would be to the left (not sure why the snippet put them above)]. In my latest program I have 82 references!
    Done. You can now access all your front panel controls and indicators anywhere in your program as shown below.
    You can just select Value in most cases, but in this particular case I wanted to fire off an Event to do some things (log the alarm) as well as just update the value. So, this is another bonus with the method.
    Hopefully this all makes sense. If not, let me know.

  • Control-k key binding broken. How can I check and change my key bindings?

    I use the Terminal app a lot. Unfortunately I am not able to use the control-k shortcut to cut lines in the terminal anymore. How can I check (and change) the Terminal key bindings?
    Thank you!

    Basing on your input, you should get the following values:
    1) session keys
    SK_ENC: 6DCE2A99BACB5207A7A96A92F114D66C
    SK_MAC: 0D446132B168F75CD6F0A780693A4DD3
    SK_DEK: 19F7B0F94837F32874B29B5EFB7809F6
    2) host cryptogram
    1B781553209748EA
    3) Retail MAC
    01761103B810F00E
    Summing up, the External Authenticate command should have the following value:  84 82 01 00 10 1B781553209748EA 01761103B810F00E.
    Try to compare it with your results.
    Regards

  • How can I check and change the size of photo or doc in iPhone or any other app

    How can I check and change the size of photo or doc in iPhone or any other app

    You would need software form a third party to have this option.  The free software that comes with the 8600 doesn't have an option for that. Vuescan is the only software I could find that says it works with your pritner and has a descreen option.  You have to purchase it, but it will give you more advanced options than the software that came with the printer.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • How can we create and change RSS XML?

    1. What tools can we use to create RSS XML pages?
    2. The pages should use data of the other XML pages generated by the XML-forms (e.g. News XML pages)?
    3. How can we setup and change RSS XML templates (e.g. add new tags, change properties and values)?

    Hi
    Is  there any way to create Rss for personal blogs and add it into our portal. That means we can add it newly by clicking button.
    Thank You
    Regards
    Krishnamurthy

  • How can I display on a string the symbol omega (ohms)

    how can I display on a string the symbol omega (ohms)

    Hi,
    See there : http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000032410000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0
    Hope this helps !
    Julien

  • How can I display append changes history of a multiline textbox in custom form?

    I want to display changes history of multiline textbox in custom aspx form as normally display in standard dispform.aspx and editform.aspx page.
    How can I do this?

    Hello
    It seems you want to get the versions of multiline textbox, see following article, may help you
    http://www.mtelligent.com/journal/2007/10/17/the-insanity-of-getting-versions-of-a-multilinetext-box-set-.html
    Keep us  updating.
    Ashish Kanoongo, MCP, MCSD, MCTS

  • How can I display and hide toolbar?

    hello!
    Who can tell me, how I can display and hide ERP's toolbar?
    thanks

    it is the default i think you cannot hide the application toolbar.

  • How can I get and change the values of Withholding tax grid in MIRO trx

    Hi everyone,
    I have a requirement where I need to get and change WT_WITHCD field in MIRO's Withholding tax grid. Is there a function module / Badi to do this? I used MRM_HEADER_CHECK, but the parameters related with this badi doesn't have this value.
    Do you have any idea?
    Thanks in advance!
    Regards.
    Leo.

    Hello Leonardo,
    You can change that table with help of the filed-symbol in the BADI MRM_HEADER_CHECK.
    LOOP AT ti_drseg INTO ls_drseg. 
      lv_index = sy-tabix.
      LS_DRSEG-MWSKZ = 'I0' . " < For example
      MODIFY ti_drseg FROM ls_drseg INDEX lv_index.
    ENDLOOP.
    FIELD-SYMBOLS: <drseg> TYPE mmcr_tdrseg.
    ASSIGN ('(SAPLMR1M)ydrseg[]') TO <drseg>.
    <drseg> = ti_drseg[].  " this will modify the data in MIRO with your modified data
    Regards,
    Naimesh Patel

  • How can I get and change the items grid of MIRO trx

    Hi everyone,
    I have a requirement where I need to get and change the tax code field in MIRO's item grid. Is there a function module / Badi to do this? I used MRM_HEADER_CHECK, but the parameters related with this badi only allows read but not change them.
    Do you have any idea?
    Thanks in advance!
    Regards.
    Leo.

    Hello,
    You can change that table with help of the filed-symbol in the BADI MRM_HEADER_CHECK.
    LOOP AT ti_drseg INTO ls_drseg. 
      lv_index = sy-tabix.
    ***... do your processing
      MODIFY ti_drseg FROM ls_drseg INDEX lv_index.
    ENDLOOP.
    FIELD-SYMBOLS: <drseg> TYPE mmcr_tdrseg.
    ASSIGN ('(SAPLMR1M)ydrseg[]') TO <drseg>.
    <drseg> = ti_drseg[].  " this will modify the data in MIRO with your modified data
    Regards,
    Naimesh Patel

  • How can I find and change a mask that was created by someone else?

    I need to adapt a design to a billboard; it was originally created by our parent company's marketing. The billboard company just informed me that I need to incorporate a bleed area and the document does not have that.
    I think it's using a mask on the items that will need to bleed, so I need to find the masking box and expand it to meet the bleed. But since I did not create this document, I have no idea how to find it and it's difficult to reach Marketing.
    Is there an easy way to find the mask, or make it visible?

    Unlock all layers
    Object >> unlock all
    Select >> Object >> Clipping Masks
    Object >> Clipping Mask >> Release
    If you find there are no clipping masks, you can also mask using the tranparency palette. UYou basiclaly have on lemtn whcih is your art, adn some art on top whcih serves as the mask, you slect both then use the make mask command form the transprency palette.
    Do a CMD Y to better analiyze how this is constructed, as without a screenshot we can only make a best guess as to what is going on.

  • HT4968 How can you display  and event on 2 different calendars?

    I would like to have everything on my icloud calendar on my google calendar which is already listed on my calendar list on my Mac.  How can I do this short of copying them all individually? 
    Thank you

    Purchase BusyCal and publish the iCloud calendar to Google, or any other Dav servce you like.

  • How can I check and change the system set events trace level?

    Dear all:
    How can I check the system set events trace level? I don't want the alert_log so big.
    Regards
    Terry

    Hi Terry;
    Please check :
    How to determine which system events are currently being set? [ID 845043.1]
    How To List All The Named Events Set For A Database [ID 436036.1]
    How to set EVENTS in the SPFILE [ID 160178.1]
    Also check:
    http://www.dba-oracle.com/t_grid_rac_events_in_Oracle.htm
    http://www.akadia.com/services/ora_events.html
    Hope it helps
    Regard
    Helios

  • How can I display and use the full RAW file?

    Hi,
    my camera (Canon S95) has a sensor with 4:3 aspect ratio and thus saves all RAW files in this format. Additionally, the camera can automatically create JPGs with a cropped ratio (e.g. 3:2 or 16:9). This is very helpful because you can see the target format already on the camera screen (with black bars on top and bottom), which helps the composition. However, when processing the photos on the big screen afterwards, it often also helps the photo to adjust the ratio a little bit and therefore use the additional information saved in the bigger 4:3 RAW file. This works very well with many of the freely available software tools.
    The problem found in Lightroom is now that it only shows the RAW photo in the cropped format and up to know I have found no way to display or use the full RAW format. So my question is: Which settings do I have to change to use the full format? What do I need to change?
    Searching a little bit on the web I found many other photographes having the exactly same problem with many different cameras. However none of them reported to have a solution for this. Still I am pretty sure that there must be a solution, since otherwise this would be a really heavy bug within Lightroom and I cannot imagine that Adobe would leave this matter unsolved.
    So I would really appreciate if someone could help me with this.
    Many Thanks
    Martin

    Hi Jao, Victoria, Lee Jay,
    Thanks for clearification. Do you have additional information about when this fix will be available and whether at least some popular old cameras will be supported?
    What I do not get is why Adobe would need to redo all existing cameras. I think this is a more general issue, where Lightroom misinterpretes the exif data which includes both the exif image height/width as well as the cropped image height/width. Intepreting this information correctly, any software should be able to display both - the full image and the cropped area (as shown by many cheap or free software tools). In the internet I found another workaround for the issue in Lightroom, which is undermining this point: When setting the cropped image height/width to the numbers of exif image height/width manually (e.g. with exif tools), Lightroom actually is able to display the full 4:3 picture.
    So this bug should be easily fixed for all cameras and I have no clue why Adobe still has no fixed it with Lightroom already available in version 4.2.
    Cheers
    Martin

  • How can I find and change text in Hyperlinks?

    I have 6000 hyperlinks in my document, I need to change all of the "&" they contain (in the url destination, not in the textflow) to "%26" so I can export to Epub correctly (I'm getting the classic "Export failed" and found out in forums that ampersands in hyperlinks are the problem).
    Can this replacement be automated? Maybe with Javascript? I just don't know how to search just through hyperlinks' text (url).
    Thanks a lot.

    It's perfect! Thanks a lot again!
    2011/7/19 John Hawkinson <[email protected]>
    Oh, incidently, Harbs has a script that does this with a UI.
    >
    >
    http://in-tools.com/downloads/indesign/scripts/ReplaceHyperlinkUrlValues.jsx
    >
    It's basically the same thing, but maybe a bit more user-friendly.
    >

Maybe you are looking for