How do I extend one line of a table to two pages?

I have the problem, that I want a lot of text in one line of the table. Since I have a lot of long and in between short lines, I get a lot of free space on my print-outs as the lines with a lot of text are all put on the next page. And the maximum size of one line is one page. I know from MSword that the lines can be carried to the next page. Is that possible with pages, too?
I'd love to hear an answer!
Thanks,
Lukas

You split the line into two .
As it was explained here a lot of times, a row is an object which isn't allowed to cross pages boundaries.
Yvan KOENIG (VALLAURIS, France) jeudi 28 avril 2011 15:20:35

Similar Messages

Calendar help: how do I get One event to show up on two calendars

Calendar help: how do I get One event to show up on two calendars? For example I want to enter vacation only once but I wanted to show up on the calendar that I share with my husband and the calendar I have with my assistant.

The signature should show up with each account. Usually the complaint is not having an option for multiple signatures or not being able to have a different signature for each account.

How to find the current line in the table control in module pool ?

How to find the current line in the table control in module pool ?
This is an urgent requirement? please do help me.

refer to this example
REPORT demo_dynpro_tabcont_loop_at.
CONTROLS flights TYPE TABLEVIEW USING SCREEN 100.
DATA: cols LIKE LINE OF flights-cols,
lines TYPE i.
DATA: ok_code TYPE sy-ucomm,
 save_ok TYPE sy-ucomm.
DATA: itab TYPE TABLE OF demo_conn.
 TABLES demo_conn.
SELECT * FROM spfli INTO CORRESPONDING FIELDS OF TABLE itab.
LOOP AT flights-cols INTO cols WHERE index GT 2.
cols-screen-input = '0'.
MODIFY flights-cols FROM cols INDEX sy-tabix.
ENDLOOP.
CALL SCREEN 100.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
DESCRIBE TABLE itab LINES lines.
flights-lines = lines.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE read_table_control INPUT.
MODIFY itab FROM demo_conn INDEX flights-current_line.
ENDMODULE.
MODULE user_command_0100 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
 WHEN 'TOGGLE'.
 LOOP AT flights-cols INTO cols WHERE index GT 2.
 IF cols-screen-input = '0'.
 cols-screen-input = '1'.
 ELSEIF cols-screen-input = '1'.
 cols-screen-input = '0'.
 ENDIF.
MODIFY flights-cols FROM cols INDEX sy-tabix.
ENDLOOP.
 WHEN 'SORT_UP'.
 READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
 IF sy-subrc = 0.
 SORT itab STABLE BY (cols-screen-name+10) ASCENDING.
 cols-selected = ' '.
MODIFY flights-cols FROM cols INDEX sy-tabix.
 ENDIF.
 WHEN 'SORT_DOWN'.
 READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
 IF sy-subrc = 0.
 SORT itab STABLE BY (cols-screen-name+10) DESCENDING.
 cols-selected = ' '.
MODIFY flights-cols FROM cols INDEX sy-tabix.
 ENDIF.
 WHEN 'DELETE'.
 READ TABLE flights-cols INTO cols
 WITH KEY screen-input = '1'.
 IF sy-subrc = 0.
 LOOP AT itab INTO demo_conn WHERE mark = 'X'.
 DELETE itab.
ENDLOOP.
 ENDIF.
ENDCASE.
ENDMODULE.

How can we delete a line from the table control .

hi all
how can we delete a line from the table control .
situation is.
created table control in se51 which will display the data of a table.
how could i select a line from the table control ?
how could i delete the selected lines form the table.
thanks in advance

Change the Table Control attributes such that user can only select a single record(row).
Tip to delete a selected record
1) write a module 'Mark' in the PAI as below
PROCESS AFTER INPUT.
MODULE cancel AT EXIT-COMMAND.
LOOP WITH CONTROL table_view.
MODULE read_table_control.
FIELD flag MODULE mark ON INPUT.
ENDLOOP.
MODULE user_command_0100.
2) Module Mark is below.
MODULE mark INPUT.
CHECK flag = 'X'.
x = table_view-top_line + sy-stepl - 1.
Delete itab INDEX x.
ENDMODULE. " mark INPUT
Table_view is the TableControl Name.
'flag' is of type char(1) available in the Internal table which was assigned to the select option in the table control.
award if uesful
Regards,
Sudheer

How can I display one line at a time on a PPT slide

I am using OFFICE for the Mac (2008).
In the past, I have known how to do this using PPT on a Windows PC..
But something has changed and I can no longer figure out how to get each line on a PPT slide to appear one line at a time every time I click it.
It's not that difficult, but I can't figured out where they moved the "Appear" option.
I am NOT using KEYNOTE, but PowerPoint from OFFICE for the Mac (2008)
Can someone help me.
Thanks,
Tom

Since this is a Keynote discussion forum, there may be no one here that knows. I personally hate PP and could care less about how to make one line display at a time. It is easy on Keynote and that is all I need to know. You might want to look for a PP forum and ask there.

How to get only one line between tables in database diagram?

Hi!
I'm using jdev 10.1.3. I've got a database schema with a lot of tables. I would like to have them in one database diagram in compact view with only ONE line between two tables even if there are more foreign key columns between the two tables. In the shema there are a lot of foreign keys with multiple columns and the diagram is hard to read.
How to archieve this?
Thanks,
Carsten.

hi,
u should use the same variable across all your queries.In the WAD there is a propoerty "display same variable once". Check that.
hope it helps,
regards,
Parth

How do I scroll one line at a time in Lion?

I want to upgrade to Lion but need the functionality of the scroll bar arrows. I have learned that the functionality of the arrows is part of the core operating system and is not being replaced. Any suggestions as to any add-on devices that would allow this function?
Thanks,
Rich

If the program/window is not a text-based one (such as a word processor), you can usually use the up and down arrow keys to scroll up or down one line at a time.
There are often mods to this behavior, but exactly what depends on the program. Test with the up and down arrow keys in conjunction with the usual modifier keys - Shift, Command, Option, etc.

Hi Sir! I have some questions regarding word report generation please.1.How can i add border to a word page?.2.How can i add grid lines to a table generated in word report?.3.How can i add border to a table of word report?.Thanks Imran Pakistan

Hi !
Sir I have some questions regarding word report generation using(C language in labwindows) Please.
1.How can i add border to a word page?.
2.How can i add border and grid lines to a table generated in word report(Not the " cvi table control" inserted from gui,i am asking about the table generated in word report)?
3.How can i fill a cell of word report table withe the data type other than "character"?.
And sir one question about use of timer in cvi labwindows please.
Sir i'm trying to set minimum delay interval of timer control to 1millisecond(0.001s),as i set ,timer don't cares of the interval that is set by me it responds only to the default minimum time interval which is i think 10milliseconds(i'am using windows xp service pack3 version 2002).
Regards
Imran
Pakistan
Solved!
Go to Solution.

Hello sir!
Sir i'm using daq6251.But Sir before implimenting it to my final application now i'm just trying to achieve 1millisecond time interval for timer in a vary simple programe i mean at this time no hardware (daq device) is involved i,m just trying to achieve minimum time interval of 1millisecond.
Sir i read form "help" of labwindows how this time interval can be set,i'm trying for,as described in help notes but i could'nt.I'm attaching a screen shot sir for you it may helpful for you to explain me.
And sir also waiting for your kind reply regarding word report generation.
Thanks.
Imran.
Attachments:
screen_shot_rigistry.docx ‏65 KB

How to handle the single line selection in table control

Hi All,
 I am facing a problem in the table control of modulepool program.
 I have line selection as "Single" in the table control attributes. But when i am selecting a line in the table control as long as it is in the same page,the line selection is single but when i am selecting the line in the next page,the previous selection is not deselected. So I am seeing two selection for "Single line selector" attribute.
 Could any one help me solve this problem?
Thanks & Regards,
S.Lakshmi

Hi Lakshmi,
Just Go to Table control , click on it , you can see the attributes screen , there you can see option for
Line selection
none
multiple selection
single selection
check the radio button single selection.
that will solve your problem..
regards
vijay

How can I have multiple lines in a table cell???

hi
how can I separate lines in a table cell in LV5.1.1??
EndOfLine doesn't work, neither does CR or LF..
has anybody an idea???
thanks

thanks.. but there is nothing like "multi line input" in my LV (5.1.1).. I think it might be impossible to
do it in 5.1.1, it's really time to upgrade ;-)
cheers

How To delete the Chosen line from the Table Control

Hi Friends,
i am new to Module Pool Programming , i developed a Table Control in input mode and i am getting data also into that table control. my requirement is that i want to delete the current chosen line from that table control. please help me out.

HI
GOOD
GO THROUGH THIS REPORT
REPORT demo_dynpro_tabcont_loop_at.
CONTROLS flights TYPE TABLEVIEW USING SCREEN 100.
DATA: cols LIKE LINE OF flights-cols,
lines TYPE i.
DATA: ok_code TYPE sy-ucomm,
      save_ok TYPE sy-ucomm.
DATA: itab TYPE TABLE OF demo_conn.
      TABLES demo_conn.
SELECT * FROM spfli INTO CORRESPONDING FIELDS OF TABLE itab.
LOOP AT flights-cols INTO cols WHERE index GT 2.
cols-screen-input = '0'.
MODIFY flights-cols FROM cols INDEX sy-tabix.
ENDLOOP.
CALL SCREEN 100.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
DESCRIBE TABLE itab LINES lines.
flights-lines = lines.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE read_table_control INPUT.
MODIFY itab FROM demo_conn INDEX flights-current_line.
ENDMODULE.
MODULE user_command_0100 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
    WHEN 'TOGGLE'.
      LOOP AT flights-cols INTO cols WHERE index GT 2.
        IF cols-screen-input = '0'.
          cols-screen-input = '1'.
        ELSEIF cols-screen-input = '1'.
          cols-screen-input = '0'.
      ENDIF.
MODIFY flights-cols FROM cols INDEX sy-tabix.
ENDLOOP.
    WHEN 'SORT_UP'.
      READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
      IF sy-subrc = 0.
        SORT itab STABLE BY (cols-screen-name+10) ASCENDING.
        cols-selected = ' '.
MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDIF.
    WHEN 'SORT_DOWN'.
      READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
      IF sy-subrc = 0.
        SORT itab STABLE BY (cols-screen-name+10) DESCENDING.
        cols-selected = ' '.
MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDIF.
    WHEN 'DELETE'.
      READ TABLE flights-cols INTO cols
                              WITH KEY screen-input = '1'.
      IF sy-subrc = 0.
        LOOP AT itab INTO demo_conn WHERE mark = 'X'.
          DELETE itab.
ENDLOOP.
      ENDIF.
ENDCASE.
ENDMODULE.
CHANGE THE CODE AS PER THIS LIGIC.
THANKS
MRUTYUN

How do I Hide a Row in a Table in a Pages document?

How do I hide a row or column? There is a command to "unhide" but not to hide. Because I cannot hide anything, the unhide command is greyed out - what did Apple do with the Hide Rows command for Tables in Pages? Hide it? lol!
It does not show up in a search of Help - in fact, there isn't even a mention of "unhide" despite there being a command for it!
Why do I want to hide a row? Because if I have an 8 row table in a Pages Template and I only need six of them, deleting the other two breaks all the formulae and inserts #Ref! errors across each formula, rather than automatically altering cell references as other spreadsheets do. In Numbers hiding the cells makes them disappear and does not break the formulae, but this behaviour seems to be missing from Pages.
Or is it me that has missed somethng?

I thought that the descriptions given in the Help are clear.
The ADDRESS function constructs a cell address string from separate row, column, and table identifiers.
ADDRESS(row, column, [type], [style], [table])
row: The row number of the address.
column: The column number of the address.
I dropped the comments about type, style and table as I don't use them here.
=IF(ISBLANK(INDIRECT(ADDRESS(ROW(),1))),"",INDIRECT(ADDRESS(ROW(),2))*INDIRECT(A DDRESS(ROW(),3)))
INDIRECT(ADDRESS(ROW(),1))
returns the contents of the cell whose row is the same than the one containing the formula \[the row number is given by ROW()] and whose column is the 1st one)
INDIRECT(ADDRESS(ROW(),2))
returns the contents of the cell whose row is the same than the one containing the formula \[the row number is given by ROW()] and whose column is the 2nd one)
INDIRECT(ADDRESS(ROW(),3))
returns the contents of the cell whose row is the same than the one containing the formula \[the row number is given by ROW()] and whose column is the 3rd one)
In short, when the formula is applied in row 9 it behaves like:
=IF(ISBLANK(A9),"",B9*C9)
The long syntax is required to be able to enter it only once in the header cell as described in the Help and in the PDF User Guide in a chapter entitled "Applying a Formula Once to Cells in a Column or Row".
As we want to use such a formula, it would be odd to destroy its ability using a different formula in a standard bottom row.
More, in a footer row, we may use shorter formulas than in other rows.
In a standard row 10 we would have to write =SUM(D2:D9)
in a footer row we enter only =SUM(D) which add the contents of every standard cells of the column D.
This feature is also described in the named resources.
Yvan KOENIG (from FRANCE vendredi 3 octobre 2008 18:21:13)

How do I split a table over two pages in Pages?

Hi
I'm trying to split a table in Pages so that the text in the two adjacent rows will fall on two separate pages but I cannot find a way to do this. This was something that is easy to do if using MS Word so I can't believe it would be a feature missing from Pages?
The document I'm working with is my resume and I had my jobs nicely formatted in a long table so it was easy to work with (job title, dates, achievements etc. in different cells). Since updating to Yosemite and Pages 5.5 I've noticed that I now have my career summary and 'Professional Experience' title on the first page but the table with all my job information is now starting on the second page - leaving just a lot of blank space on the first page. One of the jobs on the second page now also splits across pages 2 and 3. I can see that it is trying to keep everything in the table together and that what I need to do is just split the table at a certain point so that I can put the first part of the table back onto page 1 and the second part of it on page 2 - but it won't give me any option to do this.
Any ideas?

Although this thread is several months old, I felt compelled to reply as I have just encountered this gaping hole in Pages functionality. Jerrold Green 1 is incorrect in asserting that the OP's problem is that Pages won't split a cell across pages. The OP clearly indicates that Pages is not moving rows that won't fit on the first page of the table, but rather it moves the whole table to the next page.
So for example, if I have a paragraph of text at the top of page 1, and then insert a table under this paragraph that contains more rows than will fit on the remainder of the page, rather than the rows that won't fit being moved to page 2, Pages moves the entire table to page 2 leaving a big blank space on page 1. But bizarrely if the table contains more rows than will fit on one whole page, then it will move the overflow rows onto the third page, making you wonder why it didn't just do this on page 1.
This is with the table arrangement set to Move with Text. If I set it to Stay on Page, the end of the table just flows over the footer and off the page into oblivion. If I set Text Wrap to None, it just plonks the table right on top of the other text. So it gives you the option to do something silly, but not the most sensible option.
If I am missing something, then can someone please correct me. Without this basic functionality Pages cannot be considered a professional Word Processor. I'll unfortunately have to go back to MS Word.

How do you advance one line at a time (text) within each slide?

In PowerPoint you can either present an entire slide at one time or make each bulleted line in the slide appear line by line as you click the mouse button.
I cannot figure out how to do this in Captivate. I am only able to advance an entire slide at one time.

The easiest way would be to import the slides from PowerPoint using the high-fidelity import setting (assuming you're using Captivate 7 with a PC and a newer version of PowerPoint).
The "all-Captivate" way is to make several full-slide transparent "buttons" that display one after the other, play for a set period of time, then pause until the next click. You'd then adjust the text box duration in the timeline, and add effects (if desired). (You could also use "continue" buttons, but full-slide buttons would better duplicate the PowerPoint behavior.)

How can I cancel one line in a family share plan?

What are the fees associated? Is this possible to do from the web?

There may be an Early Termination Fee (ETF) if the line is still in contract. Typical ETF's are $350 minus $10/month in contract for a smartphone or $175 minus $5/month in contract for a basic phone (based on the type of phone subsidized when the contract was started).
To cancel, you must call Customer Service or visit a store (canceling cannot be done online by yourself) so then you can find out the appropriate fees for the line you want to cancel.
Good luck.

How do I extend one line of a table to two pages?

Similar Messages

Maybe you are looking for