How to add a link at the bottom of all emails as a default

I would like to have some information at the bottom of all my emails, like a name address and website. how do I set that as a default on all mail that I write?
thanks in advance

http://kb.mozillazine.org/Signatures_(Thunderbird)

Similar Messages

How to add a link in the masthead in the portal

Hi,
Actuallly i want to add a new link for ex-help link or user info etc..in the masthead in theportal,can any one please suggest me how to go about it as iam completely new to E.P and have not done any development ,till now have been dealing with support issues ,so your help will be greatly appreciated.
Regards
Pooja

Hi,
Follow this link,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d07bf112-1705-2a10-1a9f-d0a705e550fa
This article will clearly explain how to add a new link in masthead.
I hope this is helpful for you. You have any doubt regards this ask me, i will help you.
Regards
Prakash T

I'm unable to use the link at the bottom of an email to unsubscribe-how do I do it?

Thank you in advance for looking at my message. I have a Macbook Pro-Retina. When I am looking at emails, and some junk email, how do I unsubscribe? I go to the bottom of the email where there is a ? link to unsubscribe, however, when I hover over the link or try to click on the link nothing happens. I have tried to Right click or two fingers but still nothing. I know someone out there is clever enough to explain in Simple terms how to do this. All help will be gratefully received! Many thanks.

GTPhilippa wrote:
...When I am looking at emails, and some junk email, how do I unsubscribe?...
Indeed, if it's a phishing attempt as BobTheFisherman points out, an active "unsubscribe" link might well be notification to the Spammer that your email address is live and can be sold to others for further use. You don't want to tell the Spammer that.

I need my name and business information at the bottom of all emails

on my old Outlook email I was able to set up the letter page with my name and my business information at the end of the message. I can not find anything like this on Thunderbird. All incoming mail I get has it so why can't I find it here?

It's called your signature. You can set one up for each account under Account Settings.
http://en.flossmanuals.net/thunderbird/composing-messages/
If you need to change between signatures then look for the Signature Switch add-on. This will require you to create signatures as HTML or plain text files.
http://en.flossmanuals.net/thunderbird/signature-switch/

How to add custom link to shopping cart

hello,
can anyone tell me how to add a link to the shopping cart page (rather than using the View cart link on the module_shoppingcartsummary)?
also, is it possible to customise the module?
instead of:
2 item(s), Total: £0.00 View Cart
i'd like to display:
<cart image> My Cart 2 item(s)
thanks and regards,
Frank

I am getting pretty frustrated with all the broken links in here. Why can't you guys forward these deprecated links?
If the only results in my searches for help end in broken links to a decrepit website, then you erode any hint of professionalism here.
These links are only a few months old and yet youve shut them down without even a thought of who've you have left hanging.
We pay for this abuse?
Argh!

How do I add a link to the list of links under the "My Account Link"

Q) How do I add a link to the list of links under the "My Account Link"?
A) Edit any of your portlet web services and go to the "Advanced URL Settings" and then "User Configuration URL". If you type a path in this box, a link displays on the My Account page.
You need to restart your portal web server to see results immediately because the display page is cached.

What To Do If Your iDevice or Computer Is Lost Or Stolen
If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
Reporting a lost or stolen Apple product
AT&T, Sprint, and Verizon can block stolen phones/tablets
What-To-Do-When-Iphone-Is-Stolen
Lost or Stolen iPhone? Here’s What to do.
6 Ways to Track and Recover Your Lost/Stolen iPhone
Find My iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
Find My iPhone
Setup your iDevice on MobileMe
OS X Lion- About Find My Mac
How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Third-party solutions for computers:
VUWER 1.5.4
Sneaky ******* 0.2.0
Undercover 4.7
LoJack for Laptops Premium Mac
STEM 2.1
MacPhoneHome 3.5

How do I add my business information to the bottom of my email

how do I add my business information to the bottom of my email. I have a Macbook Pro and Verizon email.

If you're using a webmail interface, check with their documentation or their support personnel.
If you're using the Mac's Mail app, look in Preferences / Signatures.

How do I add a signature to the bottom of a photo?

How do I add a signature to the bottom of the photo?
I have created a signature, but it centers in the photo and I need to just professionally sign my photos with small area to the bottom right of my pictures. HELP!!

Hello, wecome to the forums! the easiest is to use the watermark panel that Russell Brown made: scroll down or search for Watermark on http://www.russellbrown.com/scripts.html
You will find a script, and a video that explains how to use it.
If you want to do it yourself, crate an action where you will use the layer>align>... Menu entries to place your signature where you want it.
Hope this helps!

How to add a link/url to the the task assignment email body?

Hi,
I'm currently creating a SharePoint 2013 workflow by using visual studio 2013.
in the workflow I assign tasks to multiple users by making use of the CompositeTask workflow activity.
I would like to add a ling to the task form in the body of the assignment email.
When using the SingleTask workflow, the output of the activity provides a task item ID which can be used when construction a link/url to the task edit form, but there is no such output.
How can I add a link to the task form in the body of the email?
Thanks in advance

Found this link just after I posted my question:
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.workflowservices.activities.taskemailtokens_fields.aspx
It has a bunch of tokens you can use inside the body of the emails

How to add another link to tray on the right

Dear all,
I have to add a link to the tray on the right or better left next to the tray can please anybody give me a hint how to do this.
And one more: I added a Button to the header of the UWL Grid Display. The button is only active if there are Items to display. How can I make the button always active no matter if there are Items or not.
Best regards
Roman

Hi Natalia,
I managed to install the live cache 2 days ago, no problem. But I wanted to know just in case during the 2nd live cache installation if there is any prerequisite or impacts besides performance.
Looks like there is no problem!!!..Thanks Anyway!
-> What version of the liveCache do you have installed?
---7.5.00.35
-> What is the OS of the liveCache server?
AIX 5.3
-> Are you going to create the second liveCache instance as the liveCache instance copy of the existing one?
not copy of the existing one, but copy from another system
-> In general you could have two or more liveCache instances running on the same server, if you have enough OS resources on the server.
no issues as the other Live cache will be used less frequently and can be shutdown most of the time

Is there anyway to print an ibook - was told I could add a link to the ibook that would send the customer to my web site where they could print it?

Is there anyway to print an ibook -
was told I could add a link to the ibook that would send the customer to my web site where they could print it?
I was told a customer could not print an ibook that they purchased?
Trying to figure out a way for them to purchase a book that they need to fill in information.
or download to their computers and print.
Any suggestions.... I have called and emailed - but can't get an answer
I have 5 books I would like to do this with.
<E-mail Edited by Host>

BlueEyesinLA wrote:
Is there anyway to print an ibook -
Not as such. You would have to put a pdf version on your web site for download, which the reader would then have to print for himself. A pdf version might look rather different than the epub or .ibooks version, you would have to try that yourself to see how much.

How to add a link to a report inline image?

Hi,
I use apex 3.1.2
I have made a report where I show a small inline image. The image is stored as a blob in the db (IMAGE:XXSMALLPICS:PICTURE:ID::::::inline:Download). It works fine, but I would like to add a link to the small image so that if I click on the image a larger image shows in a popp up window.
How can that be done?
I don't succeed to add any type of link to the image.
/Erik

Hi Sam,
Firstly, you have an error in your SQL statement:
SELECT FILE_NAME,
'<img onclick="javascript:showImage(this);" >src="#OWNER#.DISPLAY_IMAGE?inID=' || NVL(IMAGE_ID, 0) || '" >height="50" width="50" />' IMAGE
FROM A_IMAGES
ORDER BY FILE_NAMEYou have an extra > - it should be:
SELECT FILE_NAME,
'<img onclick="javascript:showImage(this);" src="#OWNER#.DISPLAY_IMAGE?inID=' || NVL(IMAGE_ID, 0) || '" height="50" width="50" />' IMAGE
FROM A_IMAGES
ORDER BY FILE_NAMEFor the Region Header - I just click on the report in the page definition and scrolled down to the setting called "Region Header". Then I pasted in:
<div id="imagediv" style="display:none; position:absolute; top:0px; left:0px; height:0px; width:0px; margin:0px; padding:0px; border:0px; background-color:whitesmoke;" align="center" onclick="javascript:closediv();"><table style="border:0px; padding:0px; margin:0px; width:100%; height:100%;" cellpadding=0 cellspacing=0><tr><td style="vertical-align:middle; text-align:center">
<img id="largeimage" src="" style="border:3px double darkblue;">
</td></tr></table>
</div>
<script type="text/javascript">
var iDIV = document.getElementById("imagediv");
var iIMG = document.getElementById("largeimage");
function showImage(i)
iIMG.src = i.src;
iDIV.style.width = document.body.clientWidth;
iDIV.style.height = document.body.clientHeight;
iDIV.style.display = "block";
function closediv()
iDIV.style.width = 0;
iDIV.style.height = 0;
iDIV.style.display = "none";
iIMG.src = "";
</script>If you go back to my page, you will see that I have added two screenshots (Page41ReportSource.gif and Page41RegionHeader.gif) that show you what I have done on my report.
Andy

How to add new fields in the EBP front end..

Hi All,
Can any one let me know the process of how to add new fileds in the shopping cart creation screens by using the "Tag Browser" option in the Object navigator.
Best Regards,
Mahesh. J

Hi
<b>Please go through the following links for more details and examples -></b>
http://help.sap.com/saphelp_47x200/helpdata/en/a2/8c6eeb2d8911d596a000a0c94260a5/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/d3/5ecbe22a8a11d5991f00508b6b8b11/frameset.htm
This will definitely help.
<u>For adding customer fields to the Shopping cart, you need to refer SAP OSS Bote 672960 and 485891.</u>
Do let me know, incase you need any other details.
Regards
- Atul

How to Add 15 Days to the current Date in eCATT

Hello eCATT Guru's,
How to add 15 days to the current date in eCATT.
I have changed the Date format to mm/dd/yyyy.
now i want to add 15 days to the sy-datum.
How to do that.do any one know?
Thanks in Advance,
Raj

Check out this link -
http://help.sap.com/saphelp_46c/helpdata/en/d7/e21a50408e11d1896b0000e8322d00/frameset.htm
It gives details about DATE variables in CATT. Hope this will help you out.
ashish
Reward points if you find this helpful.
Message was edited by: Ashish Gundawar

How to add a report into the SAP-SCRIPT .using PERFORM ......ENDPERFORM

My question is that How to add a report into the SAP-SCRIPT .
by using PERFORM ......ENDPERFORM
I don't know how to used it .

Hi Sandeep,
Please check this link
http://help.sap.com/saphelp_40b/helpdata/en/d1/803279454211d189710000e8322d00/content.htm
http://www.allinterview.com/showanswers/37425.html
Calling ABAP Subroutines: PERFORM
You can use the PERFORM command to call an ABAP subroutine (form) from any program, subject to the normal ABAP runtime authorization checking. You can use such calls to subroutines for carrying out calculations, for obtaining data from the database that is needed at display or print time, for formatting data, and so on.
PERFORM commands, like all control commands, are executed when a document is formatted for display or printing. Communication between a subroutine that you call and the document is by way of symbols whose values are set in the subroutine.
Syntax in a form window:
/: PERFORM <form> IN PROGRAM <prog>
/: USING &INVAR1&
/: USING &INVAR2&
/: CHANGING &OUTVAR1&
/: CHANGING &OUTVAR2&
/: ENDPERFORM
INVAR1 and INVAR2 are variable symbols and may be of any of the four SAPscript symbol types.
OUTVAR1 and OUTVAR2 are local text symbols and must therefore be character strings.
The ABAP subroutine called via the command line stated above must be defined in the ABAP report prog as follows:
FORM <form> TABLES IN_TAB STRUCTURE ITCSY
OUT_TAB STRUCTURE ITCSY.
ENDFORM.
The values of the SAPscript symbols passed with /: USING... are now stored in the internal table IN_TAB . Note that the system passes the values as character string to the subroutine, since the field Feld VALUE in structure ITCSY has the domain TDSYMVALUE (CHAR 80). See the example below on how to access the variables.
The internal table OUT_TAB contains names and values of the CHANGING parameters in the PERFORM statement. These parameters are local text symbols, that is, character fields. See the example below on how to return the variables within the subroutine.
From within a SAPscript form, a subroutine GET_BARCODE in the ABAP program QCJPERFO is called. Then the simple barcode contained there (u2018First pageu2019, u2018Next pageu2019, u2018Last pageu2019) is printed as local variable symbol.
Definition in the SAPscript form:
/: PERFORM GET_BARCODE IN PROGRAM QCJPERFO
/: USING &PAGE&
/: USING &NEXTPAGE&
/: CHANGING &BARCODE&
/: ENDPERFORM
/ &BARCODE&
Coding of the calling ABAP program:
REPORT QCJPERFO.
FORM GET_BARCODE TABLES IN_PAR STUCTURE ITCSY
OUT_PAR STRUCTURE ITCSY.
DATA: PAGNUM LIKE SY-TABIX, "page number
NEXTPAGE LIKE SY-TABIX. "number of next page
READ TABLE IN_PAR WITH KEY u2018PAGEu2019.
CHECK SY-SUBRC = 0.
PAGNUM = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY u2018NEXTPAGEu2019.
CHECK SY-SUBRC = 0.
NEXTPAGE = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY u2018BARCODEu2019.
CHECK SY-SUBRC = 0.
IF PAGNUM = 1.
OUT_PAR-VALUE = u2018|u2019. "First page
ELSE.
OUT_PAR-VALUE = u2018||u2019. "Next page
ENDIF.
IF NEXTPAGE = 0.
OUT_PAR-VALUE+2 = u2018Lu2019. "Flag: last page
ENDIF.
MODIFY OUT_PAR INDEX SY-TABIX.
ENDFORM.
Best regards,
raam

How to add a link at the bottom of all emails as a default

Similar Messages

Maybe you are looking for