How to change the values of variant dynamically

hi
I am working on building a wrapper program which sets the background job for another transaction CFM1.
I have a small problem, the variant attributes for a particular field MATNR has been manually changed such that it picks up values from TVARVC. The variable name in TVARVC is MATERIAL.
If I want to programatically set the selection variable as 'T' and variable name as MATERIAL which table do I need to change.
please let me know <b><REMOVED BY MODERATOR></b>
Message was edited by:
        Alvaro Tejada Galindo

Hi,
If your problem is not solved try this.
For the particular variant.
Select the variable 'T' and the field , u call it, MATERIAL. In the code fill the value of this paritcular MATERIAL variable in the TVARVC table i.e the LOW field in the table.
Now pass the variant along with the program which u want to run in the background.
Hope this helps.
If you have tried any other way let me know.
Regards,
Anand Patil

Similar Messages

  • How to change the value of Label in runtime

    Hi All,
    I want to change the value of the Label in runtime. Is it possible to change? If so then can you please let me know how to do it?
    Regards,
    Raghu

    Hi Ram,
    Check the below thread
    Dialog program - label problem
    The above thread has been updated just couple of hours ago only
    if it is Standard Screen then try using SHD0 Tcode , but this donot dynamically change the Field labels
    for more info go through Transaction Variants might be helpful,
    This demands Field Exits to be implemented
    Cheerz
    Ram

  • How to change the Value of a Varible while debugging in ECC 6.0

    Hi all,
    How can i change   and Save the Value of a varible while debugging a FM in ECC 6.0.
    I can able to change the Value of a variable by clicking the Pencil Icon (Change icon) which is there next to that value
    But i am not able to save that value
    Please give the suggestions
    Thanks in Advance
    Regards
    Ajay

    Ajay,
    I think you are changing more than one variable value at a time...this things generally happen in this case.
    Go step by step.....
    Press on the pencil button
    value filed becomes editable
    change the value
    and at once press the enter
    the ediatble field automatically becomes non editable, and hence retain the changed value.
    Pooja

  • How to change the value of a variable in new ABAP debugger.

    Hi Guys,
                 I can't change the value of a variable in the new ABAP debugger.. when I change its revert back to old value. but this is not the case with the old version. How to do this..
    Cheers
    Senthil

    Hi,
    1. Dobule click in the variable in the variable tab.
    2. Click the Change icon in Detail.Dis.
    3. enter the new value and press enter
    Refer
    [http://www.sapdb.info/new-abap-debugger/|http://www.sapdb.info/new-abap-debugger/]
    [http://help.sap.com/saphelp_nw70/helpdata/en/84/1f624f4505144199e3d570cf7a9225/content.htm|http://help.sap.com/saphelp_nw70/helpdata/en/84/1f624f4505144199e3d570cf7a9225/content.htm]
    <removed_by_moderator_together_with_points>
    Regards,
    SB
    Edited by: Julius Bussche on Jun 24, 2008 8:21 AM

  • How to change the text of label dynamically

    Hi all,
    I have done a dynpro program.It requires to implement the dynamically display the label text, for example: there is a label, sometimes, we want to display "Purchase Order" and sometimes we want to display "Sales Order". Can anyone tell me how to change the text of label according to my requirements? thanks in advance!

    Hi Wei,
    AS of now you will not be able to change the Text Field ( Label ) dynamically or at runtime. This is a limitation.Refer to this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/e4/2adbef449911d1949c0000e8353423/frameset.htm
    But, there is a way around.
    You can make a text field Visible / Invisible based on your program logic. So, based on what you want, you can process a module which will take care of that.
    Have a look at these DEMO Code. You can have a good idea to implement the logic.
    DEMO_DYNPRO_MODIFY_SCREEN - Demonstration of Dynamic Screen Modifications
    Thanks,
    Samantak.

  • How to change the value of Valuation class.

    dear friends:
    i want to change the value of Valuation class in the material master .but system  warning info occurs .
    The valuation class cannot be changed
    Message no. M3 368
    Diagnosis
    You wanted to change the valuation class. However, this is not possible because one or more of the following already exist for the material:
    Valuated stocks in the current period or in the previous period
    Open purchase orders or delivery schedule lines
    Production orders for which a goods movement has already taken place
    System Response
    Your change is reset by the system.
    Procedure
    If valuated stocks already exist, you can change the valuation class only as follows:
    a) Post the stocks of the material to an interim account.
    b) Change the valuation class in the material master record.
    c) Post the stocks of the material back to their original account.
    If open purchase orders already exist, you can only change the valuation class if you first flag the corresponding purchase order items for deletion.
    If production orders exist for which a goods movement has already taken place, you can only change the valuation class if you first set the status of the production orders to Deleted.
    Procedure for System Administration
    In Customizing for the Material Master, you can switch the check for open purchase orders and/or for production orders to a warning. You do this in Define Attributes of System Messages by assigning the message type Warning to message MM 326 and/or MM 327 respectively. However, first ensure organizationally that further processing of the open purchase orders or production orders cannot result in inconsistencies.

    To resolve SAP error message M3 368 I would suggest that you refer to SAP note number 1967543. This note outlines the issue and a resolution to it:
    Please have a look at the description of the error M3 368. This error may occur if one or more of the following already exist for the material:
    1. Valuated stocks in the current period or in the previous period
    2. Open purchase orders or delivery schedule lines
    3. Production orders for which a goods movement has already taken place
    Resolution:
    If you have valuated stocks in the current period or in the previous period, you will get message "Stocks already exist.". You have to clear all the stocks both in current period and previous period. Please have a look at SAP Note 30656, it shows an example on how to clear the stocks in
    previous period. You can use transaction MIGO to execute this step.
    If you have open purchase orders or delivery schedule lines, you will get message "Purchase orders already exist.". You can find related purchase orders after you click 'Display Error' button. Please delete them in transaction ME22N.
    If you have production orders for which a goods movement has already taken place, you will get message "Production orders already exist.". Please archive these production orders. You need to set deletion flag for these orders firstly and go to SARA, use archiving object PP_ORDER to archive
    these orders.
    Kind regards,
    James

  • How to Change the Value Field Type of a Value Field

    Hi,
    How can I change the value field type from Currency to Quantity of a value field? I have tried to do it in KEA6. I can change the value field and its description, but not the value field type from currency to qty. If I change this config, is there any other changes that I need to make so there is no side issue of this change?

    Hi Prem,
    Once you created value field as quantity or currency, you can not change this nature of value field. Based on this, system creates lots of data and tables. For this reason system will not allow any changes in quantity or currency.
    Alternative way is to remove the old value field and  create a new value field assign to operating concern and put all your seetings.
    Please let me know if you require any clarifications.
    Thank you,
    Regards,
    Santosh
    Reward points if helpful.

  • How to change the text in JTextField Dynamically

    i am trying to change the contents of JTextField dynamically like this
    textfield.setText();but it is giving error...........how can i do it....

    here is the code .....it is showing error in line 18 and 20 as identifier expected
    their i am trying to make JTextField editable....
    plz have a look
    import java.awt.*;
    import java.awt.event.*;
    import java.io.*;
    import javax.swing.*;
    import javax.swing.filechooser.*;
    import javax.swing.SwingUtilities.*;
    import javax.swing.filechooser.FileFilter;
    //import javax.swing.JEditorPane;
    import java.net.URL;
    public class tm extends JFrame implements ActionListener
    public JTextField[] programtext = new JTextField[30];
    public JTextField[] tapetext = new JTextField[30];
    tapetext.setEditable(true);
    public JTextField[] statetext = new JTextField[30];
    statetext.setEditable(true);
    int count =0;
    public static void main (String arg[]){
    tm m=new tm();
    m.setSize(1000,500);
    m.show();
    JButton loadp, run, step,loadi,loads;
    public tm()
    Container c ;
    c = getContentPane();
    c.setLayout(new FlowLayout());
    loadi = new JButton("LOAD INPUT STRING");
    c.add(loadi);
    loadi.addActionListener(this);
    loadi.setBounds(200,25,100,50);
    loadp = new JButton("LOAD PROGRAM");
    c.add(loadp);
    loadp.addActionListener(this);
    loadp.setBounds(300,25,100,50);
    run = new JButton("RUN");
    c.add(run);
    run.addActionListener (this);
    run.setBounds(400,25,100,50);
    step = new JButton("STEP");
    c.add(step);
    step.addActionListener(this);
    step.setBounds(500,25,100,50);
    loads = new JButton("LOAD STATES");
    c.add(loads);
    loads.addActionListener(this);
    loads.setBounds(600,25,100,50);
    JPanel prog = new JPanel();
    prog.setLayout(new GridLayout(30,1));
    for(int i=0;i<programtext.length;i++)
    programtext= new JTextField(10);
    prog.add(programtext[i]);
    JPanel tape = new JPanel();
    tape.setLayout(new GridLayout(30,1));
    for(int i=0;i<tapetext.length;i++)
    tapetext[i]= new JTextField(10);
    tape.add(tapetext[i]);
    JPanel state = new JPanel();
    state.setLayout(new GridLayout(30,1));
    for(int i=0;i<statetext.length;i++)
    statetext[i]= new JTextField(10);
    state.add(statetext[i]);
    JPanel contentPane3 = new JPanel();
    contentPane3.setBorder(BorderFactory.createEmptyBorder(50, 50, 50, 50));
    contentPane3.setLayout(new BorderLayout());
    contentPane3.add(state, BorderLayout.CENTER);
    contentPane3.add(c, BorderLayout.NORTH);
    contentPane3.add(prog, BorderLayout.WEST);
    contentPane3.add(tape, BorderLayout.EAST);
    setContentPane(contentPane3);
    public void actionPerformed(ActionEvent e)
    try{
    if(e.getSource ()==loadp)
    JFileChooser chooser=new JFileChooser();
    int r= chooser.showOpenDialog(this);
    if(r==JFileChooser.APPROVE_OPTION )
    String name=chooser.getSelectedFile().getName();
    File f=chooser.getSelectedFile();
    FileInputStream filestream = new FileInputStream(f);
    BufferedInputStream bufferstream = new BufferedInputStream(filestream);
    DataInputStream datastream = new DataInputStream(bufferstream);
    String record = null;
    programtext[0].setText("");
    try { 
    int i = 0;
    while (true)
    record=datastream.readLine();
    if(record == null){
    break;
    programtext[i].setText(record);
    i++;
    count = count + 1;
    System.out.println ("the no of lines of the program are"+ count);
    catch (Exception p)
    System.out.println(p);
    else if(e.getSource()==loads)
    JFileChooser chooser3=new JFileChooser();
    int r3= chooser3.showOpenDialog(this);
    if(r3==JFileChooser.APPROVE_OPTION)
    String name=chooser3.getSelectedFile ().getName();
    File f3=chooser3.getSelectedFile();
    FileInputStream filestream3 = new FileInputStream(f3);
    BufferedInputStream bufferstream3 = new BufferedInputStream(filestream3);
    DataInputStream datastream3 = new DataInputStream(bufferstream3);
    String record3 = null;
    statetext[0].setText("");
    try { 
    int i = 0;
    while (true)
    record3=datastream3.readLine();
    if(record3 == null){
    break;
    statetext[i].setText(record3);
    i++;
    catch (Exception p3)
    System.out.println(p3);
    else if(e.getSource()==loadi)
    JFileChooser chooser2=new JFileChooser();
    int r2= chooser2.showOpenDialog(this);
    if(r2==JFileChooser.APPROVE_OPTION )
    String name=chooser2.getSelectedFile().getName();
    File f2=chooser2.getSelectedFile();
    FileInputStream filestream2 = new FileInputStream(f2);
    BufferedInputStream bufferstream2 = new BufferedInputStream(filestream2);
    DataInputStream datastream2 = new DataInputStream(bufferstream2);
    String record2 = null;
    tapetext[0].setText("");
    try { 
    int i = 0;
    while (true)
    record2=datastream2.readLine();
    if(record2 == null){
    break;
    tapetext[i].setText(record2);
    i++;
    catch (Exception p2)
    System.out.println(p2);
    else if(e.getSource ()==run)
    String temp="";
    String statetemp=" ";
    String tapetemp=" ";
    int l=0;
    int tp=0;
    String pars[][] = new String[50][5];
         for(int m=0;m<count;m++){
    temp = programtext[m].getText();
    String str[]=temp.split(" ");
    for(int k=0;k<5;k++){
    pars[m][k] =str[k];
    System.out.println(pars[m][k]);
    statetemp = statetext[0].getText();
    tapetemp = tapetext[l].getText();
    while(pars[tp][0]==statetemp && pars[tp][1]==tapetemp && tp><count)
         statetemp = pars[tp][2];
         tapetemp = pars[tp][3];
         statetext[0].setText() = statetemp;
         tapetext[tp].setText() = tapetemp;
         if(pars[tp][4]=="R")
         l=l+1;
         else{
         l=l-1;
         tp++;      
    else if(e.getSource()==step)
    catch(Exception t)
    System.out.println(t);

  • How to change the value of  COMPANY_NAME in "Subject:%COMPANY_NAME% Welcome to SAP Sourcing

    Hi All,
    Can some tell me How will I change the value of COMPANY_NAME which will reflect in subject of Final mail.
    For more clear picture the subjectis"
    Subject:%COMPANY_NAME% Welcome to SAP Sourcing .
    The change vlaue of COMPANY_NAME should refleat in final subject of the mail.
    Please help me in urgent.
    Thanks
    peeyush ranjan

    Hello Peeyush,
    Because I am unaware of your exact config, I'll try to provide a generic answer:
    1. Go to Setup -> Mail Configurations
    2. Identify the Mail Configuration for the Company you want to change
    3. Click on the highlighted Company link
    4. Change the highlighted Name:
    Regards,
    Bogdan

  • How to change the value from one input control to another input control?

    Hi Experts,
    I want to change the value from  one input control to another input control. For Example if i change month in first tab. it should reflect in second tab also. How should we acheive through input control or some other option.
    Here I attached screen shot.Please help me for this

    Hi,
    It is not possible to have Input controll in all tabs that will be set from another .
    But There is one workaround .
    Follow the link below .
    http://davidlai101.com/blog/2013/08/13/web-intelligence-input-control-that-affects-all-tabs/

  • How to change the value

    Respected,
              I want to change the value of a order which is predefined,how it is done reply with the procedure .

    HI
    my question is very simple if you make an order{va01} for material A it picks the value x in amount column. From where did this value comes from ,where it is stored,what is the transaction code.
    IF my assumption is correct like your asking about the value / Amount of that particular condition Type
    suppose Material is X and maintained the Condition Record (VK11) with your combination
    at the time of Sale Order if you enter the Material with Qty system will take automatically what you maintained in Condition Record
    rate as a amount whether is Price / Discount & Surcharge/ VAT
    if you want to change that value try to check the Corresponding Condition type (T-Code :V/06) select that Condition type and TICK the Amount /Percentage Field 
    At the time of SO system will pick the Pricing Procedure based on the Sales Area + Doc.pricing procedure for Sales Doc.Type + Customer pricing procedure
    if you want to know the table and field name put the Cursor on amount col mum and press F1 or otherwise check in the VBAK, VBAP
    if i am wrong clarify
    Regards,
    Prasanna
    Edited by: prasanna_sap on Sep 13, 2011 1:00 PM

  • How to change the values of Map Region Column "REGION_NAME"

    Hi guys,
    To correspond with the values in my "CITY" column, I have to change the values of Region_name column in the map..
    region_name column contains the name of the territories in English
    but City column in my table contains the names of the territories in Arabic.
    To enable the link of the map, the values of both column ( CITY in my table, REGION_NAME in the map region ) should be identical.
    How can I change the values of REGION_NAME COLUMN ???
    This is the first time for me I deal with maps, and I hope my question is clear..
    Regards,
    Fateh

    Solved by using the following code
    var particulars = this.parent.COURSENAME.resolveNode("#items"); 
    this will bring the dropdown list into the variable particulars
    then
    for (var i = 1; i < particulars.nodes.length; i++)
    p = particulars.nodes.item(i);
    here p.value will have the dropdown line by line;
    add your valdiations etc

  • How to change the value of "DenyOnNotProtected " in OAM 11g

    Hi,
    I just wanted to know how we can change the value of the parameter "DenyOnNotProtected " in OAM 11g. In the documentation it is mentioned that we can't change the value. When I tried from console, I am not able to. Is there any other way to do this?
    Thanks,
    Srikanth

    Hi Colin,
    Thanks for the update. What you said is correct. Even though I change the attribute its updating in console (check box). But behavior is not changing. Even setting Antonymous authentication also seems to be of no use. Here I am integrating WebCenter with OAM. I have done all the configurations as per Oracle documentation. But when I try to access a protected URL (say https://oimtest.example.com/webcenter/adfAuthentication with a valid user creds, I am getting the error: Access to the URL /webcenter/oracle/webcenter/webcenterapp/view/templates/publichtml/LandingGateway.jsp has been denied for the user. I have made /webcenter/.../* as public with Anonymous authentication. Still getting access denied error. What could be the issue?
    Thanks,
    Srikanth

  • How to change the value of variable in .bpel file

    Hi,
    How can i change the value of variable in .bpel file at time of deployment.
    Can it be possible with configplan.xml or deployment descriptor?
    Thanks
    Richa

    You cannot change the value of variable in .bpel file using config plan. If you want to change value at runtime , you can use Preference variable. Below is the blog to help you understand more.
    http://eelzinga.wordpress.com/2009/10/28/oracle-soa-suite-11g-setting-and-getting-preferences/
    Cheers,
    Durga
    Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.

  • How to get the values of 2 dynamic comboboxes in one jsp to another jsp?

    I have 2 comboboxes and one submit button on my jsp page.I select a value in 1st combobox then the values in the second combobox populated from the database. next i select 2nd combobox and then submit the button.After submit the button call the next jsp page. In that page i want to display the values of two comboboxes. but my problem is , in that page only 2nd combobox value is displayed.1st combobox is displayed as null. plz tell me, how to get the values of two comboboxes at a time?
    Select.jsp:
    <%@ page language="java" import="java.sql.*" %>
    <%!
         Connection con = null;
         Statement  st  = null;
         ResultSet  rs  = null;
         String     sql = null;
         void addItems(javax.servlet.jsp.JspWriter out, String sql)
           try{     
              rs = st.executeQuery(sql);
              while( rs.next() )
                   out.println("<option>" + rs.getString(1) + "</option>");               
         }catch(Exception e)
                   System.out.println(e);
    %>
    <HTML>
    <HEAD>
    <TITLE>JSP WITH  MULTIPLE FORMS</TITLE>
    <script language="javascript">
              function checking()
                        form1.submit();
         </script>
    </HEAD>
         <body>
             <center>
             <b><font size="5" color="#333399">Staff ID:</font></b></center>
                     <FORM NAME="form1" METHOD="POST" ACTION="Select.jsp">
                         <p align=center>
                         Details of Staff :  
                       <SELECT 1 NAME="type" onchange="checking();">
                                    <option> Administrator </option>
                              <option> OfficeAssistent </option>
                              <option> Clerk </option>
                                  </SELECT 1>
                          </p>
    </FORM>
                      <FORM NAME="form2" METHOD="POST" action="welcome1.jsp">
                      <center>
                          <TABLE><TR><TD>Staff ID:</TD>
                                 <TD><SELECT 2 NAME="staff_id">
                    <%    
            String type = request.getParameter("type");
            try {
            Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
            con = DriverManager.getConnection("jdbc:odbc:java","system","manager");
            catch (ClassNotFoundException ex) {
                   System.out.println(ex);
            catch (SQLException ex)
                System.out.println(ex);
         st  = con.createStatement();
         sql = "select staff_id from "+type+"";
         addItems(out, sql);
    %>
              </SELECT 2>
           </TD>
         </TR>
    </table></center>
    <h2> Details of <%= type + "s" %> </h2>
                         <center><input type=submit value=ok onclick="submit();"></center>
                  </FORM>
         </BODY>
    </HTML>
    welcome1.jsp
    <center><h1>WEL COME</h1></center>
    <%    
            String type = request.getParameter("type");
            String sid = request.getParameter("staff_id");
    %>
    <h2> Details of <%= type + "s" %> </h2>
    <h2> Details of <%= sid %> </h2>

    <SELECT 1 NAME="type" onchange="checking();">
                                    <option value = "0"> Administrator </option>
                              <option value = "1"> OfficeAssistent </option>
                              <option value = "2"> Clerk </option>
                                  </SELECT 1>

Maybe you are looking for

  • Does  the iphone 4s only use 4g or 3g to?

    Does  the iphone 4s only use 4g or 3g to?

  • Transferring music from ipod classic to new computer

    Hi, can anyone help? My last computer became corrupted and unusable and I am left only with my ipod of music, which I would like to transfer to a new computer, however, it will not synch with the new one as it is says my ipod is already synched with

  • I can't get Logic to bounce in Quad

    I have a piece for 7.1 surround audio, and I will be having it performed in a space that can only support quadraphonic audio. To address this, I created a surround logic project in which I uploaded the stems and set the output to quad. However, when

  • Change multiprovider which is assigned to aggregation level

    Hi guys, is there a easy way to change multiprovider which is assigned to aggregation level? We have already some queries, filters and functions on the aggregation level. So we cant simply delete it and create another one. I just want to change multi

  • Quiet line test has mains hum - how to fix

    My BT incoming pair is located right below the electrical mains distribution board. A Quiet line test has main hum which goes away when I trip the RCDs (there are two) My speed has never been good (2.5Mb max - we are nearly in the next exchange area)