How to connect database using oracle SQL developer

I am newbie in EBS R12
I downloaded Oracle SQL Developer
and create new database conenction
Connection name: ebs demo db connection
Role: Default
Connection type: Basic
Port: 1521
SID: clone
when i try this there is an error
Status: Failure-Test failed: lo exception: The Network Adapter could not establish the connection
no idea about this
but i used the apps/apps as username and password
please help
Edited by: cheesewizz on Jul 16, 2010 11:35 PM

Thanks for your reply
I tried to connect and here is the result: see below
[[email protected] 11.1.0]$ sqlplus / as sysdba
SQL*Plus: Release - Production on Sat Jul 17 15:35:31 2010
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> CONNECT apps/apps
But still cannot connect using ORACLE SQL Developer

Similar Messages

  • How to connect sqlserver use oracle sql developer?

    I created a non-oracle location connection in owb and can load data from sqlserver to warehouse. Now, I want to use sqlplus or sqldeveloper to connect sqlserver directly, But I got this error message"ora-03135:connection lost contact".
    How can I connect sqlserver in sqldeveloper or sqlplus?

    Hi Napo,
    SQLDeveloper can migrate to oracle, browse sqlserver and run and display results from single statements.
    I have not seen "ora-03135:connection lost contact" have you set up sqlserver for tcp/ip connection, checked the port is open (and not blocked by, for example, firewalls) and used the jtds driver to connect SQLDeveloper to sqlserver?
    Note that "ora-03135:connection lost contact" is an oracle error and does not seem related to sqlserver.
    Oracle also has heterogenous gateway products which may be useful
    Oracle® Database Gateway for SQL Server User's Guide

  • Unable to connect to Oracle Database using Oracle Sql developer

    Hi Everyone,
    I am searching for some help regarding my problem with Oracle connectivity. I have installed Oracle 11g release 2 on my Windows XP Professional Laptop. For a few days after installation i could connect to the Oracle database with the SYSTEM account using Oracle SQL developer ( installed on the same Laptop) but now i am unable to do so.It gives me this annoying message:
    An error was encountered performing the required operation  Got a minus one from read call .Vendor code 0
    However i am able to connect using Sql Plus by supplying the username SYSTEM and the corresponding password.
    My TNSNAMES .ora file is as follows:
    ORACLE =
    (ADDRESS = (PROTOCOL = TCP)(HOST =localhost)(PORT = 1521))
    (SID = CLRExtProc)
    My Listener.ora file is as follows:
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = CLRExtProc)
    (ORACLE_HOME = D:\app\product\11.2.0\dbhome_1)
    (PROGRAM = extproc)
    (ENVS = "EXTPROC_DLLS=ONLY:D:\app\product\11.2.0\dbhome_1\bin\oraclr11.dll")
    (SID_DESC =
    (GLOBAL_DBNAME = Oracle)
    (ORACLE_HOME = D:\app\product\11.2.0\dbhome_1)
    (SID_NAME = Oracle)
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    My Sqlnet.ora file is as follows:
    I am new to Oracle and so i need someone in this forum who can help me resolve this problem. Also i even tried connecting to the database using Toad It give me the following error:
    ORA 12537 : TNS Connection closed
    Thanks for your patience and help in advance.

    Hello Irian and Sue,
    I can connect to the Oracle database using SQL Plus. Now when i TNSPING ORACLE from command line i get the following message :
    Used parameter files:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =localhost
    TNS-12537: TNS:connection closed
    Thanks for your response to my initial post.Do u have any other methods to resolve this?

  • Issues connecting to sql 2005 database using Oracle sql developer 1.2

    I just installed the sql developer and was trying to use the quick migrate to try a migration from a sql server to oracle..
    I am getting the following error message when i click on the retrieve database after entering the database credentials
    Status : Failure net.sourceforge.jtds.jdbc.driver
    I am getting another error message when i click on the 'test' button
    Status: Failure - Unable to find driver: net.sourceforge.jtds.jdbc.driver
    I downloaded the jtds driver from source forge and i am wondering what I should do to get the sql developer to make successful connections to sql server.
    Any help is appreciated.

    I have the same issue with both version 1.1.3 of the SQL developer and the latest version(1.2.1). I have added the jar file path in tools->preferences->Database->Third Party etc...
    I got the jar file from this download:
    I get this error when trying to connect to an sql server: Unable to find driver: net.sourceforge.jtds.jdbc.Driver
         at oracle.dbtools.raptor.conntypes.RaptorConnectionWrapper.createConnection(
         at oracle.dbtools.raptor.conntypes.RaptorConnectionWrapper.getJdbcConnection(
         at oracle.dbtools.raptor.conntypes.RaptorConnectionWrapper.getPresentation(
         at oracle.dbtools.raptor.utils.Connections$ConnectionInfo.createConnection(
         at oracle.dbtools.raptor.utils.Connections$ConnectionInfo$ConnectRunnable.doWork(
    Any help would be appreciated. I like the tool would hate to have to abandon it, it works like a charm on our oracle databases.

  • How to use Oracle SQL Developer 4.0 to connect to Ms Access file with .accdb extension

    Hi all,
    I am using Oracle SQL Developer 4.0 and Ms Access 2013 under Windows 7 (64 bits)
    After browsing and selecting MS Access file with accdb extention, I got  an error message  :[Microsoft] " Data source name not found and no default driver specified".
    On Administravitve Tools=> ODBC Data Source Administrator=>Drivers I have                                                File                                date
    Name :                                                                               Version
    Microsoft Acess Driver (*.mdb, *accdb)                                 12.00.4518.1014                                        ACEODBC.DLL                    26/10/2006
    Would you please advise?
    Thank you very much in advance

    That MS Access driver is 64-bit, I think.  If SQL Developer, or JDK is 32-bit you need to use the 32-bit driver.   You can see if you have a 32-bit driver installed using  c:\windows\system32\odbcadm32.exe

  • How to create a counter using Oracle SQL Developer?

    Is there any way to create a counter using Oracle SQL Developer to create the below scenario. Meaning it will recorded down the name of user and ID and time and the date they login.
    Library portal home statistics shows how many users (outside and within the campus) visit the library portal.
    Page Access statistics is recorded on an hourly basis. Users may select the statistics by
    yearly (statistics displayed by all months in the selected year)
    monthly (statistics displayed by all days in the selected month)
    daily (statistics displayed by all hours in the selected day)

    I'm giving here one basic post - hope this will solve your problem --
    SQL> create table audit_info
      2   (
      3     usr        varchar2(50),
      4     log_time   timestamp(6)
      5    );
    Table created.
    SQL>  create table err_log
      2     (
      3       log_cd      varchar2(20),
      4       log_desc    varchar2(500)
      5     );
    Table created.
    SQL>   create or replace procedure ins_err(errcd   in  varchar2,
      2                                        errnm   in  varchar2)
      3    is
      4      pragma autonomous_transaction;
      5    begin
      6      insert into err_log values(errcd,errnm);
      7      commit;
      8    end;
      9  /
    Procedure created.
    SQL>   create or replace procedure ins_aud(ud   in varchar2,
      2                                        unm  in varchar2)
      3    is
      4      pragma autonomous_transaction;
      5    begin
      6      insert into audit_info values(ud,unm);
      7      commit;
      8    exception
      9      when others then
    10        ins_err(sqlcode,sqlerrm);
    11    end;
    12  /
    Procedure created.
    SQL> create or replace trigger log_odsuser1
      2   after logon on odsuser1.schema
      3   begin
      4     ins_aud('ODSUSER1',sysdate);
      5   exception
      6     when others then
      7       ins_err(sqlcode,sqlerrm);
      8   end;
      9  /
    Trigger created.
    SQL*Plus: Release - Production on Tue Jun 12 12:21:09 2007
    Copyright (c) 1982, 2002, Oracle Corporation.  All rights reserved.
    Connected to:
    Oracle9i Enterprise Edition Release - 64bit Production
    With the Partitioning, OLAP and Oracle Data Mining options
    JServer Release - Production
    SQL> set serveroutput on
    SQL> select * from audit_info;
    12-JUN-07 AMHope this will solve your purpose.
    Satyaki De.

  • How to insert data from *.dmp file to  oracle 11g using Oracle SQL Develope

    i backup my database using PL/SQL developer and made *.dmp file
    how to insert data from *.dmp file to oracle 11g using Oracle SQL Developer
    and how to make *.dmp file from sql*plus ?
    thanks in advance

    Pl/Sql developer has a config window, there you choose the exec to do the import/export.
    Find it and his home version, it may be exp or expdp, the home version is the version of the client where the exp executable is.
    Then use the same version of imp or impdp to execute the import, you do not need to use Oracle SQL Developer If you want to use it, you must have the same version in the oracle home that exp/imp of sql developer use.

  • How to change the password of a schema using Oracle SQL Developer

    Hi need to change the password of a schema using Oracle SQL Developer how do i do it?

    alter user username identified by password

  • How to create databse in oracle sql developer

    Hi am using oracle sql developer but while connecting to the database i am getting error of network adapter
    if any buddy has a solution then fill free to post
    Thanx and Regards

    Can you be a little more specific with the error? The "network adapter" errors I've seen myself have been because SqlDeveloper can't connect to the database, either because the wrong host/port was given, or because a firewall was blocking the port.

  • Optimizing an SQL Query using Oracle SQL Developer

    Hi ,
    Currently i am using Oracle SQL Developer as my Database IDE .
    Is it possible to use Orqcles SQLDeveloper for the purpose of Optimizing an SQL Query ??
    For example assume i am having a query as :
    Select from Tranac_Master where CUST_STATAUS='Y' and JCC_REPORT='N'*
    Could anybody please tell me how can i use Oracle SQL Developer to optimize this query or any other SQL queries ??
    Please share your ideas , thanks in advance .

    1. Your query looks very simplistic as it is, so I fail to see how you can better optimise it (unless 'Tranac_Master' is a view, in which case I'd need to see the view details).
    2. No tool can automagically optimise your SQL to any degree of practical use. Very minor adjustments may be possible automatically, but really it is a question of you knowing your data & database design accurately, and then you applying your expert knowledge to tune it.

  • Is there any known problem using Oracle SQL Developer 3.0.04 with Java 1.7?

    I'm new to Oracle. I have installed Oracle SQL Developer 3.0.04 and Java 1.7. When I run Oracle SQL Developer, I will get the window Running this product is supported with minimum Java version of 1.6.0_04 and a maximum version less than 1.7. This product will not be supported....
    Is there any known problem using Oracle SQL Developer 3.0.04 with Java 1.7?
    I have already downloaded Java 1.6 but don't know whether I need to uninstall Java 1.7 first. If don't need to uninstall Java 1.7, how can I set Oracle SQL Developer to run with Java 1.6?
    Thanks for any help.
    Edited by: 881656 on Aug 25, 2011 11:22 AM

    One prior post discussing the use of Java 7 is:
    SQL Developer 3.0  and Java SE 7?
    There is no need to uninstall any Java version (except if you have disk space constraints) and no problem switching between Java versions. This may be controlled in the sqldeveloper.conf file in your ...\sqldeveloper\sqldeveloper\bin directory via the SetJavaHome line. For example:
    #SetJavaHome ../../jdk
    SetJavaHome C:/Program Files/Java/jdk1.6.0_26
    #SetJavaHome C:/Program Files/Java/jdk1.7.0Regards,
    Gary Graham
    SQL Developer Team

  • Getting the schema using Oracle SQL Developer 1.5.1

    I need to generate a report in CSV/XLS format using Oracle SQL Developer 1.5.1 to get the schema details
    in the below format.
    Table Name: XXXXXXXXX
    Table Space Name: XXXXXXXXXXXXXXX
    Structure :
    Field Name Data Type Size
    Xxxxxxxx xxxxxx xxxxx
    Xxxxxxxx xxxxxx xxxxx
    Xxxxxxxx xxxxxx xxxxx
    Xxxxxxxx xxxxxx xxxxx
    Field level constraint:
    Table Level Constraint:
    Index Name Column Name(s) Table space name
    Xxxxxxxx xxxxxxxxx xxxxxxxxxxxx
    Xxxxxxxx xxxxxxxxx xxxxxxxxxxxx
    Xxxxxxxx xxxxxxxxx xxxxxxxxxxxx
    Sequence Number:
    I am using a query to do that, but I cannot run more than one queries in the Create Report Dialog.
    I went to the Menu->View->Reports. In that, I chose User Defined Reports, created a new folder called Schema Detail and in that a report named Schema Detail. I right click on that report, choose Edit option, Create Report Dialog opens.
    In the Create Report Dialog, I chose the option Script for Value of Style.
    In the SQL column I enter a query "select * from table_names". But, if I enter another query after that, it does not run and reports an error "SQL Error: ORA-00933: SQL command not properly ended
    00933. 00000 - SQL command not properly ended" Cause:    Action: "
    I end the first query with a semi colon, but it does not work.
    The queries run fine in a SQL Worksheet. There, I can terminate the first query with a semi colon and enter the second query. Then, I run both of them together so that result-set of second query appears after the second.
    Am I doing something wrong? Can someone please advise on how to get the information I need?
    Thanks a lot.

    You can do it in SQL Worksheet because you are running a script. You could run the script in SQL*Plus, and even start it from a bat/cmd file.
    Or if you want this as a User Defined Report, you might make it a PL/SQL style report. Here, all output is done through DBMS_OUTPUT.PUT or DBMS_OUTPUT.PUT_LINE. You can output HTML tags or plain text. I have an example in my paper for ODTUG Kaleidoscope 2009.

  • Accessing MySQL InnoDB tables via JDBC using Oracle SQL Developer

    I had posted a problem in the Oracle SQL Developer forum with how that application (v1.1) accesses MySQL InnoDB tables and someone replied that the "[data migration] team created the integration with MySQL", so I am posting here in hopes of learning more about the problem.
    Here's a summary:
    When I use Oracle SQL Developer to query MySQL InnoDB tables, I need to issue a "commit" before I do each query to ensure that I am getting current results. Otherwise, it appears to be using a snapshot as-of the last commit. Is this a problem with SQL Developer, or a JDBC configuration, or MySQL problem even?
    The full details are here:
    Re: MySQL InnoDB tables

    I've posted a response to your original thread.

  • Can I use Oracle SQL Developer to "Move" data?

    I'm new to Oracle and I'm trying to use Oracle SQL Developer to export data from one table (on server A) to another table (on sever B). I'm able to create a .ldr file but I don't know how to use the .ldr file in Oracle SQL Developer? I would appreciate any help you can provide.

    The name of tables are different ?
    If I understood then try this below:
    C:\> exp user/[email protected] file=maytable.dmp tables=SAFETYADMIN_TBL_0022_43
    C:\> imp user/[email protected] file=mytable.dmp full=y
    After this import, then you can:
    C:\>sqlplus user/[email protected]
    SQL> insert into SAFETYUSER_TBL_0022_44
         select * from SAFETYADMIN_TBL_0022_43;
    SQL> drop table SAFETYADMIN_TBL_0022_43;Feedback if this is not that you want.

  • SQL Server table capture using Oracle SQL Developer

    I need to know how to set up the Oracle SQL Developer to captuer SQL Server table with correct field precision. For some reason, all NVARCHAR field precision sizes are the double of the original precision size after capturing the table.
    SQL Server table 'A' with the following field:
    name NVARCHAR( 50)
    after table capture becomes:
    name NVARCHAR2(100)
    which is double of the original precision.
    Any feed back or input is greatly appreciated.
    Thank you.
    Message was edited by:

    i'm sorry
    --tsql correction
    merge into md_columns m
    select md_col.precision as prec, md_col.column_name,md_col.rowid as row_id
    FROM md_schemas md_s
    join md_tables md_tab on md_tab.schema_id_fk =
    join md_catalogs md_cat on = md_s.catalog_id_fk
    inner join md_connections con on
    join md_columns md_col on md_col.table_id_fk =
    where --md_s.created_on = (select max(created_on) from md_catalogs) like '%(corr%)'
    and md_col.column_type in ('nchar','nvarchar')
    ) merge_clause on (m.rowid = merge_clause.row_id)
    when matched then update set m.precision = merge_clause.prec/2
    that works, as long as you don't forget to commit like i did....
    hope it helps

Maybe you are looking for

  • Issue with rightclicking in a text area which uses Squiggly

    Hi, I have found an issue with using squiggly in a TextArea component. I was able to simulate the same in the demo url . The issue is when I enter a random text like "aaaaaaaaaaaaaaaaaaaaaaaaaaaa" an

  • How to connect Apple TV with an iPad ?

    How to connect Apple TV with iPad ?

  • How to Create a Custom Canvas Print Order System

    Hi, I own a canvas print website but if anyone wants to order a 'custom' canvas print from their own photo they have to email me and I add effects and email them back. I'd like to move away from this and setup an automated system in Flash where the u

  • Not able to get file from application server with read dataset

    Hi, Firstly i download a file from application server from read data set and then i sent this file as attachment. But problem is that i am able to send .jpg .bmp file but i am not able to send .pdf or .doc file so what can i do for that. ? My code is

  • What isSelectionEmpty()'s function in Sun's Tutorial?

    I was searching for the function of isSelectionEmpty and the api said it is true when no indices are selected. But then what is the reason for this method to be executed at the Sun Tutorial's code below: Can anyone kindly elaborate on this method's u