How to create a circle from the centre?

Hi. I'm using PS CS3 and I want to create a perfectly round circle from the centre. How do you do this?
I know pressing shift while dragging makes it perfectly round. I've also read that pressing alt at the same time draws it from the centre, but it's not working, it just comes up with the eyedropper tool. Am I missing something or is there a different way to do it?
Thanks.

Hi,
If you click and hold the mouse and then press the Alt key and drag it should work.
Also, after you start dragging, add the Shift key to constrain to a circle.

Similar Messages

How to create a circle with the origin not at (0,0)

I want to create a circle but the origin is not at (0,0).
I have the following data;
- point coordinate (X1,Y1)
- radius of the circle
Also, I want to create a line between the origin and the point (X1,Y1).
Kindly show me how can I do this. Thank you very much.

The accuracy of the GPS Receiver is +/- 0.5 meter. Its a Novatel product (Flex Pak). I am getting the string data from the GPS receiver. I took the Longtitude data as for my X and Latitude data for my Y. I took the Longtitude and Latitude data from the center of post for my reference calculation only to get the true value of X and Y at the end of the boom. I call the X and Y value at the end of the boom as dynamic because it always give me the value wherever the boom goes. Please see the attached sample VI's.
At one point , I actually measured, using a tape measure, the distance from the end of the boom to the center of post and i am getting the correct radius. But when I rotate the boom on the other side it will give me a different radius. And looking at this radius value, while rotating the boom, I can judge that my point of origin is not (0,0).
At this point I have no idea how to get the correct origin. Kindly teach me if you have idea on this.
Do you think the way I calculated for the true value of X and Y is still correct? Is my reference too far?
Thank you very much.
Attachments:
plotting xy graph 1.vi ‏22 KB
dynamic xy calculation.vi ‏28 KB
dynamic radius calculation 1.vi ‏15 KB

How to create an alias from the command line

Hi
I would like to know how to create an alias (for a file, not a command) from the command line. I don't want to use the ln command, as an alias has more interesting features than soft/hard links... Is there an Apple specific tool to do this?
Thanks
-Jerome
Mac OS X (10.4.10)

The only straightforward way that I am aware of for creating a "Finder" alias from the command line is using AppleScript via 'osascript'. Of course, it's not really a command line solution since the "Finder" has to be running. Anyway, something along the lines of:
<pre style="overflow:auto; padding: 5px; width: 500px ; font-size: 10px; border:1">osascript -e 'tell application "Finder" to make alias file to POSIX file "/full/path/to/file" at POSIX file "/full/path/to/folder"'</pre>

How to create XMLTYPE View from the XMLType table

Hi:
I have a large XML file and inserted to the XMLTYPE table
For the XQUERY purpose I would like to create XMLView of the table.
The examples I got from Oracle to create XML view are for small files.
Can some one help me how to create XMLType VIEW for large XML Files ( 20,000 lines )?
Ali_2

Have a look at the examples given on XMLType Views (based on relational tables) or standard views (based on XMLType storage) in the FAQ url located on the main page of this forum site regarding XMLDB.

How to create planned order from the sales order for a processing item

In the MTO sceanrio, assembly order is created directly from the sales order. I would like to create a planned order from the sales order.
I tried the Planning strategy group 81 in the material master but it didnt work.
Could you please let me know how to do it? Is it Schedule line config that controls whether planned order is created?
Thanks
Harish

Narayana,
Planning strategy 82 is the best & standard way of getting production order created on sale order create.
just assign this strategy in MRP 3 view under strategy group.
If not then using sale order reqt type ( KMFA- Assembly with production order) & assigning this to your sale order item category is also another way to create prodcution order without using planning strategy in material master.
Follow steps in SPRO-->Sales & dist --> basic functions >avail check &transfer of requirements> transfer reqts-->determination of reqt type using transaction
Here you may select the item category you in sale orders & assign KMFA to your item category. this will then give option in sale order create to change reqt type to KFMA for assebly orders.
If you need KFMA to be default assign it to Item cat/ MRP type ( PD) combo.
Regards
Ritesh

How to create new documet from the output of another document automatically

Hi all
here is the scenario, If we are creating an debit memo request and debit memo to a customer, from the output of this debit memo we need to trigger the creation of another document( Ex credit memo to another customer) automatically, how we can do this?

Hi Dev,
You need to create another report program for the other document along with the smartform.
In the report program, you have to put your logic on how the other document has to be found when your document is created and the output be triggered.
So in principle,
There will be two programs linked to your output type.
One will create the output of the document which is being created,
Another program will automatically call the other target document in change mode and trigger the same output, during which the second program will be executed.
Now the second program will create the output for the second document.
Making copy controls wont help for this reqmt.
Reward points if it helps.

How to create dll file from c code to use in compactrio 9004 RT controller

Hi.
I am using Compactrio 9004 Real time controller and i am new to this. I have a C code and i want to use this with the RT controller.I red that that can be done by creating a dll file and can be called in labview.Can any body expalin how to create a DLL from the c code and be used with this RT controlelr?
Regards,
Vishnu

vishnu123 wrote:
Hi,
Earlier in this forum itself in cRIO 900x controllers will run Pharlap and run C/C++ code compiled into .dll files.Can you please tell how to transfer the created DLL to RT controller memory throght FTP?
Thanks and regards,
Vishnu
There is another KB article about this for Pharlap based controllers. And you are right the earlier CompactRIO controllers were Pharlap based. Basically for a deployed application to work, you need to put the DLL through FTP in "/ni-rt/system". If you deploy it directly from the project everything will be loaded into memory through the project environment itself including directly dependable DLLs, (but of course won't survive a power cycle).
I hope you are aware that while Windows DLLs can work on Pharlap OS they by no means will do so always. The Pharlap OS has not a fully featured Windows API. Also you need to be careful which version of Visual C you are going to use depending on the Pharlap OS version, since the VC runtime DLLs already present on the controller will need to be the same as the ones your Visual C environment likes to link in. Recent Pharlap OS versions use the msvcr71.dll. It's very possible that those runtime libraries can't just simply be copied from a normal Windows installation but might have been recompiled by NI specifically for their controller targets.
So to avoid problems it's a good idea to make sure your DLL uses the same runtime library DLL or make your DLL to include the static MS runtime.
Rolf Kalbermatter
Message Edited by rolfk on 02-05-2008 09:51 AM
Message Edited by rolfk on 02-05-2008 09:53 AM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How to create xml file from Oracle and sending the same xml file to an url

How to create xml file from Oracle and sending the same xml file to an url

SQL/XML (XMLElement, XMLForest, XMLAgg, etc) and UTL_HTTP.
Whether that works for you with the version of Oracle you have, your requirements, and needs is another story. A little detail goes a long way.

How to create Default Schema from within the application

Hi friends
I am creating users using the following within my application using this syntax
BEGIN
APEX_UTIL.CREATE_USER
(:P124_USER_ID, :P124_USER_NAME,:P124_USER_FIRST_NAME,:P124_USER_LAST_NAME,' ',:P124_USER_EMAIL_ID,'xxxx');
END;
The default workspace for the user is set as blanks. I would like to set it to be the default workspace as per the current logged in user.
Can you help me with the syntax for this
thank you in advance
Laxmi

Laxmi,
The subject of the post is "How to create Default Schema from within the application".
But your question asks how to set the "default workspace" for a newly created user.
Those are different questions and not the ones I think you need answered.
Let me answer this question "How can you set the default schema for an account when creating the account and set it to the same value used for the default schema attribute of the administrator account used to authenticate to the currently running application?".
In the apex_util.create_user call use named parameter notation and fetch the information about the currently logged-in user first, e.g.,declare
l_workspace               varchar2(256);
l_user_name               varchar2(256);
l_first_name              varchar2(256);
l_last_name               varchar2(256);
l_web_password            varchar2(256);
l_email_address           varchar2(256);
l_start_date              varchar2(256);
l_end_date                varchar2(256);
l_employee_id             varchar2(256);
l_allow_access_to_schemas varchar2(256);
l_person_type             varchar2(256);
l_default_schema          varchar2(256);
l_groups                  varchar2(256);
l_developer_role          varchar2(256);
l_description             varchar2(256);
begin
apex_util.fetch_user (
p_user_id                  => apex_util.get_current_user_id,
p_workspace                => l_workspace,
p_user_name                => l_user_name,
p_first_name               => l_first_name,
p_last_name                => l_last_name,
p_web_password             => l_web_password,
p_email_address            => l_email_address,
p_start_date               => l_start_date,
p_end_date                 => l_end_date,
p_employee_id              => l_employee_id,
p_allow_access_to_schemas => l_allow_access_to_schemas,
p_person_type              => l_person_type,
p_default_schema           => l_default_schema,
p_groups                   => l_groups,
p_developer_role           => l_developer_role,
p_description              => l_description);
apex_util.create_user(
p_user_id        => :P124_USER_ID,
p_user_name      => :P124_USER_NAME,
p_first_name     => :P124_USER_FIRST_NAME,
p_last_name      => :P124_USER_LAST_NAME,
p_email_address => :P124_USER_EMAIL_ID,
p_web_password   => 'xxxx',
p_default_schema => l_default_schema);
end;Scott

Lightroom 5 Graduated filter will not work from the centre out

Hi
I am running Lightroom 5.6 but I think this has always been the same. The Graduated filter in the Basic Development module only seems to work from the edges inward (from top/bottom or sides). I would like to create a filter across the centre (for a lake) but I can figure how to do this. I guess the only way is to use the new Radial filter is that correct (I would prefer to use the Grad filter).

To create the equivalent of a Graduated filter with the effect starting at the center you can drag the radial filter endpoint to stretch it off-screen. Use the hand tool to push the radial filter off-screen and then drag the endpoint out further. You may need to do this a few times. You can also use two Graduated filters back to back, which gives you the ability to apply a centered Exposure correction and adjustments for Highlights and Shadows correction that are different on each side.

How to create many user in the same database

hi
my question is "How to create many user in the same database(application)?"
for example, i have students, teachers, and staffs user using my application.
i can create many users to use the same application right?, how ^^''' ???
(right now i can only create application and then it shows every data in my DB
but i want it to show only the data for the user who login to that application)
Thanks.
ps. i'm newbie, please help T^T

You need to create a user table within your application that maintains their privileges. If you have LDAP you could use this for authorisation otherwise the table would handle that as well (store passwords etc). Your reports etc would then be filtered on information from this table.
Check out some of the sample applications to see how authorisation and access is implemented (Online store is one). The how-to on the issue tracking system should also have some useful pointers.
http://download-west.oracle.com/docs/cd/B31036_01/doc/appdev.22/b28839/issue_track.htm#BABBGBJG
cheers,
Ron

How 2 creat report for displaying the details of a Delivery Document using

how to create report for displaying the details of a Delivery Document using the tables LIKP, LIPS
thank you
regards,
jagrut bharatkumar shukla
points will be rewarded

HI
I AM GIVING YOU MY DELIVERY DOCUMENT CODE...MODIFY IT ACCORDING TO YOUR REQUIREMENT
*& Report ZDELIVERY                                *
report zdelivery message-id z9bhu          .
types: begin of t_likp,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
*           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
*           WAERK TYPE LIKP-WAERK,      "Currency
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
       end of t_likp.
types: begin of t_lips,
           vbeln type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,
*           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
           vgbel type lips-vgbel,      "Doc no of the reference document
        end of t_lips.
types: begin of t_vbpa,
           vbeln type vbpa-vbeln,      "SD DocumenT Number
           posnr type vbpa-posnr,      "Item number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,      "Customer Number 1
       end of t_vbpa.
types: begin of t_kna1,
           kunnr type kna1-kunnr,      "Customer Number 1
           name1 type kna1-name1,      "Name 1
           ort01 type kna1-ort01,      "City
           adrnr type kna1-adrnr,      "Address
       end of t_kna1.
types: begin of t_li_vbpa,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
*           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
*           WAERK TYPE LIKP-WAERK,      "Currency
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
           vbeln1 type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,      "Net Price
*           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
           vgbel type lips-vgbel,      "Doc no of the reference document
           vbeln3 type vbpa-vbeln,     "SD DocumenT Number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,      "Customer Number 1
       end of t_li_vbpa.
types: begin of t_final,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
           vbeln1 type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,      "Net Price
           vgbel type lips-vgbel,      "Doc no of the reference document
           vbeln3 type vbpa-vbeln,     "SD DocumenT Number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,     "Customer Number 1
           name1 type kna1-name1,      "Name 1
           ort01 type kna1-ort01,      "City
           adrnr1 type kna1-adrnr,     "Address
           name2 type kna1-name1,      "Name 1
           ort02 type kna1-ort01,      "City
           adrnr2 type kna1-adrnr,     "Address
           name3 type kna1-name1,      "Name 1
           ort03 type kna1-ort01,      "City
           adrnr3 type kna1-adrnr,     "Address
       end of t_final.
*            D A T A D E C L A R A T I O N
*&*********Internal Table Declaration****************&*
data: it_likp type standard table of t_likp.
data: it_lips type standard table of t_lips.
data: it_vbpa type standard table of t_vbpa.
data: it_kna1 type standard table of t_kna1.
data: it_li_vbpa type standard table of t_li_vbpa.
data: it_li_vbpa_temp type standard table of t_li_vbpa.
data: it_final type standard table of t_final.
*&*********Work Area Declaration********************&*
data: wa_likp type t_likp.
data: wa_lips type t_lips.
data: wa_vbpa type t_vbpa.
data: wa_kna1 type t_kna1.
data: wa_li_vbpa type t_li_vbpa.
data: wa_li_vbpa_temp type t_li_vbpa.
data: wa_final type t_final.
*&*********Data Declaration************************&*
data: d_vbeln type likp-vbeln.
data: flag type i value 0.
*           S E L E C T I O N S C R E E N   D E C L A R A T I O N
selection-screen begin of block block2 with frame title text-001.
select-options: s_vbeln for d_vbeln obligatory.    "Delivery no
selection-screen end of block block2.
*            A T S E L E C T I O N - S C R E E N   E V E N T S
*AT SELECTION-SCREEN.
*PERFORM VALIDATE_DATA.
*            S T A R T   O F S E L E C T I O N     E V E N T S
start-of-selection.
perform fetch_data.
perform merge_data_kna1.
*INCLUDE Z9BT_SH_***4_FORMS.
call function 'OPEN_FORM'
exporting
*   APPLICATION                       = 'TX'
*   ARCHIVE_INDEX                     =
*   ARCHIVE_PARAMS                    =
    device                            = 'PRINTER'
*   DIALOG                            = 'X'
*   FORM                              = ' '
   language                          = sy-langu
*   OPTIONS                           =
*   MAIL_SENDER                       =
*   MAIL_RECIPIENT                    =
*   MAIL_APPL_OBJECT                  =
*   RAW_DATA_INTERFACE                = '*'
*   SPONUMIV                          =
* IMPORTING
*   LANGUAGE                          =
*   NEW_ARCHIVE_PARAMS                =
*   RESULT                            =
exceptions
   canceled                          = 1
   device                            = 2
   form                              = 3
   options                           = 4
   unclosed                          = 5
   mail_options                      = 6
   archive_error                     = 7
   invalid_fax_number                = 8
   more_params_needed_in_batch       = 9
   spool_error                       = 10
   codepage                          = 11
   others                            = 12
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
sort it_final by vbeln.
loop at it_final into wa_final.
call function 'START_FORM'
exporting
*   ARCHIVE_INDEX          =
   form                   = 'Z9BT_DELIVERY'
   language               = sy-langu
*   STARTPAGE              = ' '
*   PROGRAM                = ' '
*   MAIL_APPL_OBJECT       =
* IMPORTING
*   LANGUAGE               =
exceptions
   form                   = 1
   format                 = 2
   unended                = 3
   unopened               = 4
   unused                 = 5
   spool_error            = 6
   codepage               = 7
   others                 = 8
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'WRITE_FORM'
exporting
   element                        = 'ITEM_LIST'
   function                       = 'SET'
   type                           = 'BODY'
   window                         = 'MAIN'
* IMPORTING
*   PENDING_LINES                  =
* EXCEPTIONS
*   ELEMENT                        = 1
*   FUNCTION                       = 2
*   TYPE                           = 3
*   UNOPENED                       = 4
*   UNSTARTED                      = 5
*   WINDOW                         = 6
*   BAD_PAGEFORMAT_FOR_PRINT       = 7
*   SPOOL_ERROR                    = 8
*   CODEPAGE                       = 9
*   OTHERS                         = 10
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'END_FORM'
* IMPORTING
*   RESULT                         =
exceptions
   unopened                       = 1
   bad_pageformat_for_print       = 2
   spool_error                    = 3
   codepage                       = 4
   others                         = 5
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endloop.
call function 'CLOSE_FORM'
* IMPORTING
*   RESULT                         =
*   RDI_RESULT                     =
* TABLES
*   OTFDATA                        =
exceptions
   unopened                       = 1
   bad_pageformat_for_print       = 2
   send_error                     = 3
   spool_error                    = 4
   codepage                       = 5
   others                         = 6
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*&      Form VALIDATE_DATA
*       text
* --> p1        text
* <-- p2        text
form validate_data .
select single vbeln into wa_likp-vbeln
                    from likp where vbeln in s_vbeln.
append wa_likp to it_likp.
if sy-subrc <> 0.
flag = 1.
endif.
endform.                    " VALIDATE_DATA
*&      Form FETCH_DATA
*       text
* --> p1        text
* <-- p2        text
form fetch_data .
select a~vbeln
       a~erdat
       a~kunnr
       a~kunag
       a~traty
       b~vbeln
       b~posnr
       b~matnr
       b~arktx
       b~lfimg
       b~netpr
       b~vgbel
       c~vbeln
       c~parvw
       c~kunnr
         into table it_li_vbpa
                from likp as a
                left outer join lips as b on a~vbeln = b~vbeln
                inner join vbpa as c on b~vgbel = c~vbeln
                where a~vbeln in s_vbeln and
                c~parvw = 'RE'.
endform.                    " FETCH_DATA
*&      Form MERGE_DATA_KNA1
*       text
* --> p1        text
* <-- p2        text
form merge_data_kna1 .
if it_li_vbpa[] is not initial.
it_li_vbpa_temp[] = it_li_vbpa[].
sort it_li_vbpa_temp by kunnr.
delete adjacent duplicates from it_li_vbpa_temp comparing kunnr.
loop at it_li_vbpa into wa_li_vbpa.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunag.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunnrb.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
endloop.
endif.
if it_li_vbpa_temp[] is not initial.
select kunnr
        name1
        ort01
        adrnr into table it_kna1 from kna1
                    for all entries in it_li_vbpa_temp
                    where kunnr = it_li_vbpa_temp-kunnr.
endif.
loop at it_li_vbpa into wa_li_vbpa .
wa_final-vbeln = wa_li_vbpa-vbeln.
wa_final-erdat = wa_li_vbpa-erdat.
*it_final-LFART = it_li_vbpa-LFART.
wa_final-kunnr = wa_li_vbpa-kunnr.
wa_final-kunag = wa_li_vbpa-kunag.
*it_final-VSTEL = it_li_vbpa-VSTEL.
wa_final-traty = wa_li_vbpa-traty.
wa_final-vbeln1 = wa_li_vbpa-vbeln.
wa_final-posnr = wa_li_vbpa-posnr.
wa_final-matnr = wa_li_vbpa-matnr.
wa_final-arktx = wa_li_vbpa-arktx.
wa_final-lfimg = wa_li_vbpa-lfimg.
wa_final-netpr = wa_li_vbpa-netpr.
*wa_final-GEWEI = it_li_vbpa-GEWEI.
*it_final-VOLUM = it_li_vbpa-VOLUM.
*it_final-VOLEH = it_li_vbpa-VOLEH.
wa_final-vgbel = wa_li_vbpa-vgbel.
wa_final-vbeln3 = wa_li_vbpa-vbeln.
*wa_final-PARVW = wa_li_vbpa-PARVW.
wa_final-kunnrb = wa_li_vbpa-kunnrb.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnr.
if sy-subrc = 0.
wa_final-name1 = wa_kna1-name1.
wa_final-ort01 = wa_kna1-ort01.
wa_final-adrnr1 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunag.
if sy-subrc = 0.
wa_final-name2 = wa_kna1-name1.
wa_final-ort02 = wa_kna1-ort01.
wa_final-adrnr2 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnrb.
if sy-subrc = 0.
wa_final-name3 = wa_kna1-name1.
wa_final-ort03 = wa_kna1-ort01.
wa_final-adrnr3 = wa_kna1-adrnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
endform.

How do i parse data from the second jframe back to the first?

Hello.
I have a jFrame were I promt users to keep a list of Names in a jTable. (I keep data for something else, but lets say names.. ) Anyway, afterwords I want to add some extra parameters for each name. So I created a new frame, which is opened when user press an Edit button. The new frame opens and users can add for the specific name some extra data, like age, height, color, sex.. etc. that characterizes this person.
On this second form i have a save button, which when its pressed i would like to keep this information for this name, so as when user press edit again from the first frame on the same Name the data that previously entered will be loaded (lets say that the user can not enter the say name again)
I haven' t figured the code for the save Button, but with the rest I am fine.
Can you give any ideas with structures that I have to use and how the action listener will have to be??
When I set visible the new form i have made a constructor that loads the new form which have a label with the name of the person that is edited., but how do i parse data from the second form back to the first that is already opened??
Thanks very much..

I found it.. it was not so hard afterall..
anyway, i quote the new code..
package namelist;
// Java core packages
import java.awt.event.*;
import java.util.*;
// Java extension packages
import javax.swing.*;
import javax.swing.table.*;
public class NamesGUI extends javax.swing.JFrame {
    //Variables for managing the jTables
    DefaultTableModel tableModel;
    Vector rows,cols;
    String[] colName1 = {"List of Names"};
    ManageJTables mJT = new ManageJTables();
    Hashtable h;
    /** Creates new form ProsAgentGUI */
    public NamesGUI() {
        h = new Hashtable();
        initComponents();
    /** This method is called from within the constructor to
     * initialize the form.
     * WARNING: Do NOT modify this code. The content of this method is
     * always regenerated by the Form Editor.
    private void initComponents() {
        Panel = new javax.swing.JPanel();
        ToolBar = new javax.swing.JToolBar();
        ADD = new javax.swing.JButton();
        EDIT = new javax.swing.JButton();
        REMOVE = new javax.swing.JButton();
        jButton1 = new javax.swing.JButton();
        TScrollPane = new javax.swing.JScrollPane();
        Table = new javax.swing.JTable();
        setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
        setTitle("Names");
        setBackground(new java.awt.Color(0, 51, 51));
        Panel.setBorder(javax.swing.BorderFactory.createTitledBorder("List of Names"));
        ToolBar.setBorder(javax.swing.BorderFactory.createEmptyBorder(1, 1, 1, 1));
        ADD.setText("ADD");
        ADD.setToolTipText("");
        ADD.setBorder(new javax.swing.border.SoftBevelBorder(javax.swing.border.BevelBorder.RAISED));
        ADD.addActionListener(new java.awt.event.ActionListener() {
            public void actionPerformed(java.awt.event.ActionEvent evt) {
                ADDActionPerformed(evt);
        ToolBar.add(ADD);
        EDIT.setText("EDIT");
        EDIT.setToolTipText("");
        EDIT.setBorder(new javax.swing.border.SoftBevelBorder(javax.swing.border.BevelBorder.RAISED));
        EDIT.addActionListener(new java.awt.event.ActionListener() {
            public void actionPerformed(java.awt.event.ActionEvent evt) {
                EDITActionPerformed(evt);
        ToolBar.add(EDIT);
        REMOVE.setText("REMOVE");
        REMOVE.setToolTipText("");
        REMOVE.setBorder(new javax.swing.border.SoftBevelBorder(javax.swing.border.BevelBorder.RAISED));
        REMOVE.addActionListener(new java.awt.event.ActionListener() {
            public void actionPerformed(java.awt.event.ActionEvent evt) {
                REMOVEActionPerformed(evt);
        ToolBar.add(REMOVE);
        jButton1.setText("jButton1");
        jButton1.addActionListener(new java.awt.event.ActionListener() {
            public void actionPerformed(java.awt.event.ActionEvent evt) {
                jButton1ActionPerformed(evt);
        ToolBar.add(jButton1);
        rows=new Vector();
        cols= new Vector();
        cols=mJT.addColumns(colName1, cols);
        tableModel =new DefaultTableModel();
        tableModel.setDataVector(rows,cols);
        Table.setModel(tableModel);
        TScrollPane.setViewportView(Table);
        org.jdesktop.layout.GroupLayout PanelLayout = new org.jdesktop.layout.GroupLayout(Panel);
        Panel.setLayout(PanelLayout);
        PanelLayout.setHorizontalGroup(
            PanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(ToolBar, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 210, Short.MAX_VALUE)
            .add(TScrollPane, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 210, Short.MAX_VALUE)
        PanelLayout.setVerticalGroup(
            PanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(PanelLayout.createSequentialGroup()
                .add(ToolBar, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 34, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
                .addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
                .add(TScrollPane, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 159, Short.MAX_VALUE))
        org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(getContentPane());
        getContentPane().setLayout(layout);
        layout.setHorizontalGroup(
            layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(org.jdesktop.layout.GroupLayout.TRAILING, layout.createSequentialGroup()
                .addContainerGap(org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
                .add(Panel, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
                .addContainerGap())
        layout.setVerticalGroup(
            layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(org.jdesktop.layout.GroupLayout.TRAILING, layout.createSequentialGroup()
                .addContainerGap(29, Short.MAX_VALUE)
                .add(Panel, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
                .addContainerGap())
        pack();
    private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
        System.out.println(h.toString());
public void updateNamesTable (int id, String na){
     Integer i2 = new Integer(id);
     Object o2 = (Object)i2;
     if (h.containsKey(o2)){
        Name a = (Name)h.get(o2);
        a.name = na;
        h.put(o2,a);
     else {
         Name aa = new Name();
         aa.name=na;
         h.put(o2,(Object)aa);
    private void EDITActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
        String name = Table.getValueAt(Table.getSelectedRow(),0).toString();
        int rowNum= Table.getSelectedRow();
        Integer i = new Integer(rowNum);
        Object o = (Object)i;
        updateNamesTable (rowNum, name);
        //public NameEditor(Name n, Hashtable h, int id)
        NameEditor re = new NameEditor((Name)h.get(o), h, rowNum );
        re.setVisible(true);
    private void REMOVEActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
        mJT.deleteRow(Table.getSelectedRow(), rows, Table);
    private void ADDActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
        mJT.addRow(rows, Table);
     * @param args the command line arguments
    public static void main(String args[]) {
        java.awt.EventQueue.invokeLater(new Runnable() {
            public void run() {
                new NamesGUI().setVisible(true);
    // Variables declaration - do not modify
    javax.swing.JButton ADD;
    javax.swing.JButton EDIT;
    javax.swing.JPanel Panel;
    javax.swing.JButton REMOVE;
    javax.swing.JScrollPane TScrollPane;
    javax.swing.JTable Table;
    javax.swing.JToolBar ToolBar;
    javax.swing.JButton jButton1;
    // End of variables declaration
public class NameEditor extends javax.swing.JFrame {
    Hashtable h;
    Name n;
    int id;
    /** Creates new form NameEditor */
    public NameEditor() {
        initComponents();
    public NameEditor(Name n, Hashtable h, int id) {
        this.h=h;
        this.n=n;
        this.id=id;
        initComponents();
        NameField.setText(n.name);
        jTextField2.setText(n.weight);
        jTextField1.setText(n.height);
        setDefaultCloseOperation(javax.swing.WindowConstants.DISPOSE_ON_CLOSE);
    /** This method is called from within the constructor to
     * initialize the form.
     * WARNING: Do NOT modify this code. The content of this method is
     * always regenerated by the Form Editor.
    private void initComponents() {
        NameLabel = new javax.swing.JLabel();
        NameField = new javax.swing.JTextField();
        SaveBut = new javax.swing.JButton();
        jLabel3 = new javax.swing.JLabel();
        jLabel4 = new javax.swing.JLabel();
        jTextField1 = new javax.swing.JTextField();
        jTextField2 = new javax.swing.JTextField();
        setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
        setTitle("Name Editor");
        getAccessibleContext().setAccessibleName("Name Editor");
        NameLabel.setText("Name: ");
        NameField.setEditable(false);
        NameField.addActionListener(new java.awt.event.ActionListener() {
            public void actionPerformed(java.awt.event.ActionEvent evt) {
                NameFieldActionPerformed(evt);
        SaveBut.setText("SAVE");
        SaveBut.addActionListener(new java.awt.event.ActionListener() {
            public void actionPerformed(java.awt.event.ActionEvent evt) {
                SaveButActionPerformed(evt);
        jLabel3.setText("Height");
        jLabel4.setText("Weight");
        org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(getContentPane());
        getContentPane().setLayout(layout);
        layout.setHorizontalGroup(
            layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(layout.createSequentialGroup()
                .add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.TRAILING)
                    .add(layout.createSequentialGroup()
                        .addContainerGap()
                        .add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
                            .add(layout.createSequentialGroup()
                                .add(jLabel4)
                                .addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED))
                            .add(org.jdesktop.layout.GroupLayout.TRAILING, layout.createSequentialGroup()
                                .add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
                                    .add(jLabel3)
                                    .add(NameLabel))
                                .add(16, 16, 16)))
                        .add(17, 17, 17)
                        .add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
                            .add(NameField, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 138, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
                            .add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.TRAILING, false)
                                .add(org.jdesktop.layout.GroupLayout.LEADING, jTextField2)
                                .add(org.jdesktop.layout.GroupLayout.LEADING, jTextField1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 46, Short.MAX_VALUE))))
                    .add(org.jdesktop.layout.GroupLayout.LEADING, layout.createSequentialGroup()
                        .add(127, 127, 127)
                        .add(SaveBut)))
                .addContainerGap())
        layout.setVerticalGroup(
            layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(layout.createSequentialGroup()
                .addContainerGap()
                .add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
                    .add(NameLabel)
                    .add(NameField, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
                .add(30, 30, 30)
                .add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
                    .add(jLabel3)
                    .add(jTextField1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
                .add(12, 12, 12)
                .add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
                    .add(jLabel4)
                    .add(jTextField2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
                .addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED, 27, Short.MAX_VALUE)
                .add(SaveBut)
                .addContainerGap())
        pack();
    public void updateNameTable (){
     Integer i2 = new Integer(id);
     Object o2 = (Object)i2;
     h.put(o2,n);
    private void SaveButActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
        n.height= jTextField1.getText();
        n.weight = jTextField2.getText();
    private void NameFieldActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
     * @param args the command line arguments
    public static void main(String args[]) {
        java.awt.EventQueue.invokeLater(new Runnable() {
            public void run() {
                new NameEditor().setVisible(true);
    // Variables declaration - do not modify
    javax.swing.JTextField NameField;
    javax.swing.JLabel NameLabel;
    javax.swing.JButton SaveBut;
    javax.swing.JLabel jLabel3;
    javax.swing.JLabel jLabel4;
    javax.swing.JTextField jTextField1;
    javax.swing.JTextField jTextField2;
    // End of variables declaration
}

How to create a table in the file using java code.?

HI,
I should export the data from the view objects to a word document. I have done that but I should
display the data in the form of a table.
Kindly come up with the necessary information on how to create a table in the file using java.
Thanks,
Phani

Hi, Thank you for responding to my query.
The below are the details of my code.
DCBindingContainer dcBindings =
(DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding StudentDetailsContent =
(DCIteratorBinding)dcBindings.get("StudentView1Iterator");
OutputStreamWriter w = new OutputStreamWriter(outputStream, "UTF-8");
Row currentRow =
StudentDetailsContent.getRowSetIterator().first();
Object a[]= currentRow.getAttributeValues();
int i;
for(i=0 ;i<=a.length;i++){
w.write(a.toString());
w.write(" ");
w.flush();
I am usning this coding to achieve the task of exporting data to file.
I need to display this information in the table that is where I need help from you people.
Thanks,

How to export some data from the tables of an owner with integrity?

Hi to all,
How to export some data from the tables of an owner with integrity?
I want to bring some data from all tables in a single owner of the production database for development environment.
My initial requirements are: seeking information on company code (emp), contract status (status) and / or effective date of contract settlement (dt_liq_efetiva) - a small amount of data to developers.
These three fields are present in the main system table (the table of contracts). Then I thought about ...
- create a temporary table from the query results table to contract;
- and then use this temporary table as a reference to fetch the data in other tables of the owner while maintaining integrity. But how? I have not found the answer, because: what to do when not there is the possibility of a join between the contract and any other table?
I am considering the possibility of consulting the names of tables, foreign keys and columns above, and create dynamic SQL. Conceptually, something like:
select r.constraint_name "FK name",
r.table_name "FK table",
r.column_name "FK column",
up.constraint_name "Referencing name",
up.table_name "Referencing table",
up.column_name "Referencing column"
from all_cons_columns up
join all_cons_columns r
using (owner, position), (select r.owner,
r.constraint_name fk,
r.table_name table_fk,
r.r_constraint_name r,
up.table_name table_r
from all_constraints up, all_constraints r
where r.r_owner = up.owner
and r.r_constraint_name = up.constraint_name
and up.constraint_type in ('P', 'U')
and r.constraint_type = 'R'
and r.owner = 'OWNERNAME') aux
where r.constraint_name = aux.fk
and r.table_name = aux.table_fk
and up.constraint_name = aux.r
and up.table_name = aux.table_r;
-- + Dynamic SQL
If anyone has any suggestions and / or reuse code to me thank you very much!
After resolving this standoff intend to mount the inserts in utl_file by a table and create another program to read and play in the development environment.
Thinking...
Let's Share!
My thanks in advance,
Philips

Thanks, Peter.
Well, I am working with release 9.2.0.8.0. But the planning is migrate to 10g this year. So my questions are:
With Data Pump can export data just from tables owned for me (SCHEMAS = MYOWNER) parameterizing the volume of data (SAMPLE) and filters to table (QUERY), right? But parameterizing a contract table QUERY = "WHERE status NOT IN (2,6) ORDER BY contract ":
1º- the Data Pump automatically searches for related data in other tables in the owner? ex. parcel table has X records related (fk) with Y contracts not in (2,6): X * SAMPLE records will be randomly exported?
2º- for the tables without relation (fk) and which are within the owner (MYOWNER) the data is exported only based on the parameter SAMPLE?
Once again, thank you,
Philips
Reading Oracle Docs...

How to create a circle from the centre?

Similar Messages

Maybe you are looking for