How to enhance open Item data source from R/3 ??

Hello All,
I am trying to enhance the business content extractor for open items in R/3 . The data source is 0FC_OP_01. i know this is coming from the table DFKKOP.
I need to add sub GL ffield rom another table from DFKKOPK .
Please advise the step by step to enhance the existing structure and add the new field to the extractor.
Points will be rewarded for any helpful answers.
thanks in advance,
AG..

Hi,
please check out the forums, there are lot of threads about the issue 'how to enhance a datasource'. Just to give you a hint. Use transaction rsa6 in your source system for that. Here you can enhance the extract structure, the datasource and you can do the coding...
regards
Siggi

Similar Messages

How to prevent Pivot Table Data Source from being changed automatically?

I have an excel file that contains a Pivot Table that references a table within the workbook (Data Source = "MyTable"). When I save the file and copy it, the copy contains a reference to the original file. Instead of displaying, "MyTable",
it shows "OldFilename!MyTable" where OldFilename is the name of the original file, not the current file.
How do I prevent this from occurring. It is only doing this on my current machine, if I perform these steps on a different machine, the problem does not occur and the Data Source property stays the same as it should.
What setting(s) do I change to fix this problem?
Thank you in advance for your help!
Michael

Hi Michael,
How about the issue now, is it solved?For the 'data model' feature,please refer to:
http://blogs.office.com/2012/08/23/introduction-to-the-data-model-and-relationships-in-excel-2013/
let us know if you have any additional questions or concerns.
Best regards,
Wind

R12: How to filter Open Item Revaluation Report based on GL Date

Hi,
Anybody know how to filter Open Item Revaluation Report based on GL Date from and GL Date to in R12?
Since we just upgraded from 11.5.10 to 12.1.3 and found we cannot filter those report for specific date. It shown all data included the old data from 8 years ago also.
We need to run the report only for specific date only. Please share with me if anyone know about this.
Thanks.

Pl do not post duplicates - R12: How to filter Open Item Revaluation Report based on GL Date

How to take XML data source from URL?

Hi,
I creating application which need to download some data from any web page. This page is creating via XSL (as stylesheet) .This XSL
process some XML "data source" and generate HTML page. I wanna ask if exist some way how to take this XML "data source"? If i used
URL and take InputStream I everytime obtain full generated HTML, JavaScript page - compiled by web browser. But if i look to "page
source" of this page in web browser i see just that XML data source which i need to take (only at start of this xml is way to xsl
style sheet).
But this problem i have only at my required page.If i tried to take another page with similar structure code, it was succesful.
Here is link : LINK
Why i dont have permision take clear xml from this page?What is so special?
Exist some way how to take this XML without generated html code?
Thank you.

I apologize for my english. I try explain my problem again:
At this url [http://eu.wowarmory.com/item-info.xml?i=33677] is web page. If you look at "page source", web page is create via XML and XSLT. I need load this data source. I used DOMParser for that:
URL url = new URL("http://eu.wowarmory.com/item-info.xml?i=33677");
DOMParser parser = new DOMParser();
parser.parse(url);
XMLDocument doc = parser.getDocument();I get exception : Exception in thread "main" oracle.xml.parser.v2.XMLParserException: Expected '?>' instead of 'EOF'
If i used it at another page (for example [http://www.w3schools.com/XML/simplexsl.xml|http://www.w3schools.com/XML/simplexsl.xml] ), compile was successful and i can work with this XMLDocument and etc.
I try load it by InputStreamReader too:
URL url = new URL("http://eu.wowarmory.com/item-info.xml?i=33677");
try {
    BufferedReader br = new BufferedReader(new InputStreamReader(url.openStream());
    String line;
    while ((line = br.readLine() != null) {
        System.out.println(line);
} catch (IOException e) {
    e.printStackTrace
}i get only compiled HTML code by web browser. At second page i load successfuly XML data - not compiled by browser.
Is possible to take original xml page source from this page? And what diferent is between this pages?
Thank you and i hope, you can translate this post without headache :-) If it will be necessary, i can more specify some details.

How to use Sql data source from Essbase 9.3.1

Hi All,
How to use Sql data source from Essbase 9.3.1 for ASO cube.Are there any rules and limitations for that.
Do we need to create any data source connection for this purpose. If there please let me know the dteps to create that connection.
Regards

Yes you need to create one DSN connection and you have to use DSN name and login details at the time of building/loading of the outline.
Create DSN
Goto Administrative tools -> DataSources (ODBC) and add the DSN name and specify the Server name of SQL and login details and database.
goto data prep editor and click on File Menu and Click on Open SQL option Next window opens.
There you have to enter the details of the DSN connection and SQL query to build/load.
Thanks,
Prathap

How to schedule Job for data uploading from source to BI

Hi to all,
How to schedule Job for data uploading from source to BI,
Why we required and how we do it.
As I am fresher in BI, I need to know from bottom.
Regards
Pavneet Rana

Hi.
You can create [process chain |http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502b2998-1017-2d10-1c8a-a57a35d52bc8?quicklink=index&overridelayout=true]for data loading pocess and schedule start process to any time/date etc ...
Regadrs.

How to upload vendor open item data.

How to upload vendor open item data.

HI Bhanu
There are many threads on it.
You can check the below one
http://scn.sap.com/thread/3547986
Regards
Pankaj Pandey

How To change UME Data source from Abap to Java.

Hi Experts,
Can any one give me Detailed Steps of how to Migrate from UME Data Source from Abap to Java, as the Ume Data Source is initally configured for Abap.
Regards,
Siva

Siva,
Please search before you post a question.
This has been discussed many a times in here. Please refer to this [thread|To change ABAP UME database to Portal database;.
Good Luck!
Sandeep Tudumu

How To Access PAGE ITEM (single row) from HTML source

Hi Guys,
I have a page Item that return a string.
I would like to show this string
How To Access PAGE ITEM (single row) from HTML source?
My desire final output is
<marquee>:P1_PAGE_ITEM</marquee>
Can please help me
Thanks

Hi,
You can refer the page items in your page header as &itemname. For example, if I have page item P15_TEST, I will add the following in header:
<marquee>
&P15_TEST.
</marquee>But make sure that you have a process before header to populate the value in your page item. Otherwise, there will be a null scrolling (which you can't see!) :)
Regards,
Zahid

AP open items data

Hi gurus,
Here i have to extract data related to ACCOUNTS PAYBLE OPEN ITEM DATA for that i have to extract Header data , item data, and vendor data, bank details.....so pls advice me from how many tables i have to take data ...
I knew some thing like BKPF,BSEG,BSIK,LFA1,LFBK,,,,is this correct or
i have to take from BSIK for open items ,,some of the fields are avilabel in BSIK,but again i have to go to BSEG,,,,,,some fileds avilabe in this table ....pls ADVICE ME.....
Thanks
KRISNA

Hi Krisna,
Even in std transdaction code FBL1N, you need to provide comp. code,vendor #, keydate.
But since you have company code only, you can retrive all the relevant vendors for that comp. code using select from table LFB1.
You can pass these vendors alongwith the given comp. code to the BAPI through a loop.
For keydate, by default it should be current system date so set it to system date.
Hope this would be of help.
Cheers,
Vikram
Mark for helpful replies!!

Enhancing the standard Data source without deleting setup tables

Hi all,
I am in the the Support Project. My requirement is I want to Enhance u201C2LIS_13_VDITMu201D LO- data source with two fields without disturbing the delta.
Please suggest me how I have to do this.
As Per my Knowledge ,
1. we have to delete setup tables
2. Enhance the data source & re populate the setup tables.
3. Delete the data in the cube & add the two new fields in the cube & repopulate the cube with new Initial .
4. after that delta will be enabled through job control.
But this process is not suitable for our requirement because delta was enabled long back it is going very smooth till date, I donu2019t want to disturb that process.
So please suggest me is there any other procedure to do this.
Thanks,
Kiran Manyam

Hi,
If historical data (loaded earlier in to BW) are not required for the two enhance field, then it is not required to deleted the setup table and reload them to BI.
In this case simply you can follow the following procedure.
1. Enhance the fields, and update the transfor structure(to unhide these fields). In BI update the required data target with respective IO. and in exit populate the enhance fields. No need to disturb the delta
2. Replicated the DS in BI and do the mappings in tranformation.
Here the existing delta is working, and you will be populating the two fields in the exit only.
Thanks,
Jugal.

How can i lookup a data source v5 in WSAD 5.1?

Hi all,
I'm using WSAD 5.1 to developer a web application based on J2EE 1.3 that have a simple java classes. My application uses a data source version 5 to have access the database. I?m using service locator pattern to lookup a JNDI but it dont work properly on stand alone java classes, only on EJB components.
How can i lookup a data source version 5 from my java class on WSAD 5.1?
Can anyone help?
Thanks,

Oh I did not realize that you were talking about a stand-alone application. You cannot use the server datasources in your stand-alone application.
You can use the Oracle helper classes to construct a DataSource on the client side.
http://java.sun.com/j2se/1.4.2/docs/api/javax/sql/DataSource.html and driver specific documentation to achieve this. I will try to send a few links, if I find any.
In a stand-alone application, you can use some connection pooling mechanism on your own.
The ideal thing to do is to keep your data access in your middle tier (EJBs) and call the EJB's. This way you can reuse things in multiple client tiers and use the container provided datasource and connection pooling mechanisms.
Hope this helps.
Vijay

How to find open item in bsik table

anyone can tell me how to find open items for vendor in bsik table or it will store only open item.
i debug the tcode fbl1n to see . but not able to find
Kumar

Hi
There is no specific field name for open item in the table BSIK.Yes BSIK include a structure named ABSIK_PSO and which is a "IS-PS: Data appendix of open items vendors".
Yes there is a field name
BUZEI - Line Item
EBELP - Item
You check with your requirement again and try to use these fields,if you still facing some probs than write back to me,i will try to give the appropriate solutions.
Thanks
Mrutyunjaya Tripathy

Line Items Data Source for General Ledger

Hello everybody,
I'm trying to generate a Data Source for Line Items (new General Ledger) in transaction FAGLBW03. When I generated a Total Record-Data Source, everything was done correctly. When I try to generate a Line Item-Data Source, I receive following error message: "Extractors for general ledger documents are not yet supported". I was looking for any SAP notes that would explain this issue, but I couldn't find anything.
Could you please tell me how can I generate Data Source for Line Items? Add some SP, use some another transaction, ...?
Thank you for any help
Janule

Hi,
Can u tell me how did u solve that problem.
i m facing same.
/sachinkumar.

How to connect to different data sources in XI 3.1 UNIVERSE?

hi experts,
We are going to migrate from BO 6.5 to BO XI3.1.
and we have different data sources to extract and generate the reports using various tools like Webi,Crystal Reports, Deski etc.
1         How to connect to different data sources like SAP BI query, DB2, Oracle etc,, provide me the step by step solution.
2     We need to migrate the universes and reports from BO 6.5 to BO XI 3.1 using the Report Conversion Tool.
can we directly convert from the deski reports to Webi or do we need to migrate first through Import Wizard?
3    Scheduling the Reports through Infoview
4    Various issues and how to resolve those issues, we generally face while scheduling, and while creating the queries like for example time out errors etc..
5    BO Security
6    Universe creation with best practices and the loops,contexts,aliases etc..
please provide me the step by step solution documents and links.
thans in advance
venuscm

I would recommend to take a look at the official documentation. YOu can find this here
http://help.sap.com
NAvugate to SAP BusinessObjects->All products and the select the product you want eg. BusinessObjects ENterprise or Universe designer and the appropriate version XI 3.1. Take a look at the admin and the user guides.
Currently the Data FEderator will allow you to buid a universe that access data from various data sources. Another option is to merge queries from different universes at report level.
Regards,
Stratos

How to enhance open Item data source from R/3 ??

Similar Messages

Maybe you are looking for