How to get acknowlgmnt from EFT (debt card swap) machine from swing app.

Hi,
Please some 1 let me know how to get acknowlegdement from EFT ( debit card Swap) machine once it is connected to the computer.
I have a code which seems to have no errors ut it I am not sure whether the EFT machine will be able to send or recieve the data once the car is swaped. because i dont know what is the response of the EFT machine when connected to the computer though a java swing class.
I know it will be quite tidious job for you to go through my program but this is all i can do...or atleast give me a link where i can refer to such case.......I am using eclipe Ide....and have searched alot on google too......

Vish_1x1 wrote:
Hi,
Please some 1 let me know how to get acknowlegdement from EFT ( debit card Swap) machine once it is connected to the computer.What do you mean by "acknowledgement"? You realise it needs some sort of authorising host in order to authorise, right?
I have a code which seems to have no errors ut it I am not sure whether the EFT machine will be able to send or recieve the data once the car is swaped. because i dont know what is the response of the EFT machine when connected to the computer though a java swing class.Mumbo-jumbo
I know it will be quite tidious job for you to go through my program but this is all i can do...or atleast give me a link where i can refer to such case.......I am using eclipe Ide....and have searched alot on google too......Where did you get this "EFT machine" (whatever that is)? Do you mean a card reader? An EMV terminal? A PDQ? What? Where did it come from? Start there. If you need to get this thing working, you must be part of an enterprise, which has access to resources such as hardware vendor support, merchant banking services and EFT software vendors. If you're not, then you might as well abandon all hope of using this machine to take cards on your own, because you can't. End of story
And, no, nothing to do with Java

Similar Messages

The updated iPhoto program is cumbersome. I am trying to create a Christmas card and can't figure out how to get the fold of the card on the left and not on the top of the card. I had no trouble with this for the past two years. Can someone help?

The updated iPhoto program is cumbersome. I am trying to create a Christmas card and can't figure out how to get the fold of the card on the left and not on the top of the card. I had no trouble with this for the past two years. Can someone help?

Click on the Layout button lower right and choose a Vertical lyout from the dropdown

How to get report in excel format instead of pdf from oracle forms.

Hi,
How to get report in excel format instead of pdf from oracle forms.
Form & Report developer 10g
report format .rdf

create a report using report builder.
call the report from form using the following procedure
DECLARE
     RO_Report_ID REPORT_OBJECT;
     Str_Report_Server_Job VARCHAR2(100);
     Str_Job_ID VARCHAR2(100);
     Str_URL VARCHAR2(100);
     PL_ID PARAMLIST ;
BEGIN
PL_ID := GET_PARAMETER_LIST('TEMPDATA');
     IF NOT ID_NULL(PL_ID) THEN
DESTROY_PARAMETER_LIST(PL_ID);
     END IF;
     PL_ID := CREATE_PARAMETER_LIST('TEMPDATA');
     RO_Report_ID := FIND_REPORT_OBJECT('RP2RRO');
     Add_Parameter(pl_id,'P_SUPCODE',TEXT_PARAMETER,:CONTROL.S_CODE);
Add_Parameter(pl_id,'P_INVOICE_NO',TEXT_PARAMETER,:CONTROL.IN_NO);
Add_Parameter(pl_id, 'PARAMFORM', TEXT_PARAMETER, 'NO');
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_FILENAME, 'INVOICE_REG_DETAILS.rep');
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_COMM_MODE, SYNCHRONOUS);
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_EXECUTION_MODE, BATCH);
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESTYPE, FILE);
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESFORMAT, 'SPREADSHEET');
     SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_SERVER, 'rep_dbserver_frhome1');
     Str_Report_Server_Job := RUN_REPORT_OBJECT(RO_Report_ID, PL_ID);
     Str_Job_ID := SUBSTR(Str_Report_Server_Job, LENGTH('rep_dbserver_frhome1') + 2, LENGTH(Str_Report_Server_Job));
     Str_URL      := '/reports/rwservlet/getjobid' || Str_Job_ID || '?server=rep_dbserver_frhome1';
     WEB.SHOW_DOCUMENT(Str_URL, '_SELF');
     DESTROY_PARAMETER_LIST(PL_ID);
END;

I have lost my "Basic" panel in the Develop module and can't figure out how to get it back. My right panel goes from the Histogram straight to the Tone Curve panel. My Basic panel should be below the Histogram. Any ideas how to get it back. I have even

I have lost my "Basic" panel in the Develop module and can't figure out how to get it back. My right panel goes from the Histogram straight to the Tone Curve panel. My Basic panel should be below the Histogram. Any ideas how to get it back. I have even uninstalled my lightroom and reinstalled it with same issue. Help!!!

Right click on or near one of the other headers and a pop-up will appear and you will be able to select the Basic Panel for viewing.

How to get folder(directory path only not file path) from local file system

Hi Firends,
How to get folder(directory path only not file path) from local file system , whenevr i will click on browse button.
Please give reply for this one , if anybody knows.
Thanks,
Anderson.

Hi Anderson,
if you're using flash.filesystem.FileReference - then it is run in black box - except of filename, size and creation data (and few other properties available after some operation succeeded). This is part of security features in Flash runtime (described in header section):
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/net/FileReference .html
This for example implies that user can download a content to local machine - but that content cannot be loaded back into Flash runtime. For this you would need either Air runtime flash.filesystem.File:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/filesystem/File.h tml
(so you would created Air runtime based application: desktop or mobile but not web, even as standalone project) or you would need one of 3rd party tools that add file access/file information features to standard Flash runtime applications converted to standalone native applications.
hth,
kind regards,
Peter

Does anyone know how to get an ipad to use the wireless network from an airport?

Does anyone know how to get an Ipad to use the wireless network from an airport express?

By default, the AirPort Express will broadcast an unsecure wireless network with a Network Name of something like: Apple Network NNNNNN. Your iPad should "see" this network and be able to connect to it. Have you tried going through the iPad's Settings > Wi-Fi > Choose a Network... option. If so, does the AirPort's wireless network appear in the list of available networks?
Can other wireless devices connect to the AirPort's network?

How to get information about creation of a virtual machine on a Hyper-v host.

Hi,
How to get information about creation of a virtual machine on a Hyper-v host?
I need: host name, time created, creator user.
I saw in Hyper-V-VMMS but I found info about movements of VM between hosts.
Thank's in advance.
Denius Valiant

For Host Name * Created Time Use This Command In PowerShell
Get-VM -Name (Read-Host "Type Your Vm Name") |select CreationTime , ComputerName
and for Create User , As i know you should see on Event Log .
Go To Event Log Viewer--->Applications And Services Logs--->Microsoft--->Windows--->Hyper-V-VMMS--->Operational
You can see in Event Log who create the Vm.
Whenever you see a helpful reply, click on Vote As Helpful & click on
Mark As Answer if a post answers your question.
LinkedIn:
Facebook:

HT2736 If I gift songs or a CD on iTunes will it take from my gift card balance or from my regular account?

If I gift songs or a CD on iTunes will it take from my gift card balance or from my regular account?

It'll take it from your credit card. Money redeemed from a gift card can't be spent on gifts or otherwise transferred to another iTunes Store account.
(71438)

How to get period date of for a given month from a given date in mdx for SSRS report (mm/dd/yyyy)

I have a situation, where i need to write expression Period to date(PTD). i want to know how to get the period date. i want you to help in writing Period date or else is there any function to get period date for a given date(the date is given
from the parameter dynamically) in MDX for SSRS report
ram

Hi ram,
Per my understanding that you want to get the period date based on the month selected and the given date, right?
Could you please provide details information below to help us better understanding your requirements, thus we will be more effective to provide an solution:
What is the format of the period date you want to get, is this date in the DB and you want to filter it based on the month and the given Date?
Did the month and given date are two parameters in the report? if possible, could you please provide some sample data in the DB and also the snapshot of the report structure
I assume you want to get the period date(mm/dd/yyy) between the select month(e.g:Feb) and the given date (10/1/2014) and you should get the date between(02/01/2014-10/1/2014).
If so,and you also have two parameter "Month","EndDate"(EndDate is the given date), please reference to details information below:
You can create an new parameter "BeginDate" (Date/Time) which is the begin date of the period, you can use the expression to get the value based on the value of the month and the year value from the given date,finally hide this parameter:
Specify the available value:
Label:=Parameters!Month.Value &"/01/"& DatePart("yyyy",Parameters!EndDate.Value)
Value:=CDate(=Parameters!Month.Value &"/01/"& DatePart("yyyy",Parameters!EndDate.Value))
Specify the default Value:
Value:=CDate(=Parameters!Month.Value &"/01/"& DatePart("yyyy",Parameters!EndDate.Value))
Add filter to the dataset as below:
Preview you will get all the date in the given Period:
If you still have any problem, please feel free to ask.
Regards
Vicky Liu

DATA TRANSFER - How to get a SINGLE SPACE in downloaded txt file from UNIX?

Hi Experts,
Am sending data from SAP to UNIX/ Application server and text file on desk top as well.
So, I am keeping a single character just SPACE at the END of each record.
Then, When I see the downloaded text file, I found a SINGLE SPACE at the end of each record, fine.
Then, by using CG3Y t code, I downloaded the UNIX file to my desk top.
But, When I see this UNIX downloaded file from UNIX, I did NOT find any SPACE at the end of each record!!!
Am doing every thing same in both cases.
So,
1 - Why its happening in case of UNIX file?
2 - How to get a SINGLE SPACE at the END in the downloaded file from UNIX?
thanq

Its there, I am talking abut this -
OPEN DATASET - linefeed
Syntax
... WITH { NATIVE
         | SMART
         | UNIX
         | WINDOWS } LINEFEED ... .
Alternatives:
1. ... WITH NATIVE LINEFEED
2. ... WITH SMART LINEFEED
3. ... WITH UNIX LINEFEED
4. ... WITH WINDOWS LINEFEED
Effect
: These additions determine which line end marker is used for text files or legacy text files. If these additions are used, the profile parameter abap/NTfmode is ignored. Simultaneous specification of the values "UNIX" or "NT" in the addition TYPE is not permitted.
If these additions are not used, the line end marker is determined as follows, depending on the operating system of the current application server:
The line end marker for Unix is "LF". Under Unix, OS390 and OS400, only "LF" is used for reading and writing.
The line end marker for MS Windows is "CRLF". Under MS Windows, however, the values of the profile parameter abap/NTfmode can also be used to set whether new files are handled according to Unix conventions or Windows conventions. If the profile parameter has the value "b", the Unix line end marker "LF" is used. If the profile parameter has the value "t" or is initial, the Windows line end marker "CRLF" is used. The setting using the profile parameter can be overridden with the addition TYPE and the value "UNIX" or "NT". If an existing file is opened without the addition TYPE, this is searched for the first line end marker ("LF" or "CRLF"), and this is used for the whole file. If no line end marker is found, the profile parameter is used. This applies particularly if an existing file is completely overwritten with FOR OUTPUT.
If an addition WITH NATIVE|SMART|UNIX|WINDOWS LINEFEED is used, this setting can be changed for the open file using the statement SET DATASET. If neither of the additions is used, the line end marker also cannot be changed using SET DATASET.
Notes
: Without the use of an addition WITH LINEFEED, the line end marker is dependent on diverse implicit factors such as the operating system of the application server, a profile parameter, and line end markings that are already used. For this reason, the explicit use of WITH LINEFEED is recommended, which renders the use of the addition TYPE for setting the line end marker obsolete.
The line end marker that is currently used can be determined for every open file using GET DATASET.
Alternative 1
... WITH NATIVE LINEFEED
Effect
: This addition defines the line end marker independently of the access type according to the operating system of the application server, i.e. "LF" for Unix OS390 or OS400, and "CRLF" for MS Windows.
The line end marker is interpreted according to the current codepage. If a code page is explicitly specified using the addition CODE PAGE, the characters of the line end marker must exist be available or be written in accordance with this code page.
Note
: The addition WITH NATIVE LINEFEED is intended for editing files on an application server that can also be accessed by other means. The addition receives the appropriate line end marker without the program needing to know the operating system.
Alternative 2
... WITH SMART LINEFEED
Effect
: This addition depends on the access type:
In files that are opened for reading using FOR INPUT, both "LF" and "CRLF are interpreted as a line end marker. When opening an EBCDIC file with the addition CODEPAGE, in addition to "LF", "CRLF", and the EBCDIC character strings, the corresponding ASCII character strings are also recognized. In addition, the EBCDIC character "NL" (line separator) is also interpreted as a line end marker.
In files opened for appending or changing with FOR APPENDING or FOR UPDATE, the program searches for a line end marker that is already used in the file. In this process, first the end of the file is identified. If no line end marker is found there, a certain number of characters at the beginning is analyzed. If a line end marker is found, this is used when writing to the file. This is also affected by the addition CODE PAGE. For example, ASCII line end markers are recognized and used in a file opened with EBCDIC, but not the other way round. If no line end marker is found or no search is possible (for example, if the file is opened with the addition FILTER), the line end marker is determined according to the operating system of the application server, as with the addition WITH NATIVE LINEFEED.
In files opened for writing using FOR OUTPUT, the line end marker is determined according the operating system of the application server, as with the addition WITH NATIVE LINEFEED.
Note
: The addition WITH SMART LINEFEED is intended for the generic editing of files in heterogeneous environments. The line end marker is recognized and set for different formats. The use of this addition is the best solution for most application cases.
Alternative 3
... WITH UNIX LINEFEED
Effect
: The line end marker is set to "LF" regardless of the access type and operating system of the application server.
The line end marker is interpreted according to the current code page. If a code page is specified explicitly using the addition CODE PAGE, the characters of the line end marker must be available or be written according to this code page.
Note
: The addition WITH UNIX LINEFEED is intended for editing Unix files in which the specific line end markers are to be retained, even if the operating system of the current application server is MS Windows.
Alternative 4
... WITH WINDOWS LINEFEED
Effect
: The line end marker is set to "CRLF" regardless of the access type and operating system of the application server.
The line end marker is interpreted according to the current code page. If a code page is specified explicitly using the addition CODE PAGE, the characters of the line end marker must be available and be written according to this code page.
Note
: The addition WITH WINDOWS LINEFEED is intended for use with MS Windows files in which the specific line end marker is to be retained, even if the operating system of the current application server is Unix, OS390 or OS400.

DATA TRANSFER - How to get a SINGLE SPACE in the downloaded file from UNIX?

Hi Experts,
Am sending data from SAP to UNIX/ Application server and text file on desk top as well.
So, I am keeping a single character just SPACE at the END of each record.
Then, When I see the downloaded text file, I found a SINGLE SPACE at the end of each record, fine.
Then, by using CG3Y t code, I downloaded the UNIX file to my desk top.
But, When I see this UNIX downloaded file from UNIX, I did NOT find any SPACE at the end of each record!!!
Am doing every thing same in both cases.
So,
1 - Why its happening in case of UNIX file?
2 - How to get a SINGLE SPACE at the END in the downloaded file from UNIX?
thanq

Hi,
I don't know if this works:
perform SET_TRAIL_BLANKS(saplgrap) using 'X'.
perform SET_FIXLEN(saplgrap) using '0' '060'. "put length of your line from-to
... download ...
It will put space at the end of your line, according to the length.
Hope it works,
Chang

Ever since I was with my iPad in France, it goes to the French app store instead of to the Netherlands' one. As a consequence, I am unable to download any app. How to get rid of this problem? Iregularly travel from the Netherlands to France.

Ever since I was with my iPad in France, it goes to the French app store instead of to the Netherlands' one. As a consequence, I am unable to download any app. Not in France, because my bank account number is Dutch (it says), not in the Nteherlands because I should buy in the Dutch app stoe.
How to get rid of this problem? I regularly travel from the Netherlands to France.
Thanks in advvance,
Hans

You can find out how to get service for your iPad on this web page:
http://support.apple.com/kb/index?page=servicefaq&geo=Philippines&product=ipad
Regards.

How to get ridd of Garbage Values in the row from the Tables

Hi Experts,
I have an excel Sheet which has a value as
Name
ABC
PQR
XYZ
MNO
STU
DEF
JKL
So i converted that to a csv (Comma de-limited) file and created an external table out off it.
So when i try to match to "select * from table;" it displys the vlaue as below
*"ABC*
however, it should have been just ABC.
select length(Name) from Table;
O/p: 4 (It Should have been 3)
How to get rid off this garbaje character?
Please Help!!!!!!!
Regards,
Ravi R

You didn't post CSV file. I can't reproduce your issue using the following CSV:
"ABC"
"PQR"
"XYZ"
"MNO"
"STU"
"DEF"
"JKL"
SQL> CREATE TABLE EXT_EMP
2 (
3 EMP_L VARCHAR2(255)
4 )
5 ORGANIZATION EXTERNAL
6 ( TYPE ORACLE_LOADER
7 DEFAULT DIRECTORY "TEMP"
8 ACCESS PARAMETERS
9 ( RECORDS DELIMITED BY NEWLINE
10 CHARACTERSET WE8MSWIN1252
11 STRING SIZES ARE IN BYTES
12 BADFILE "EXT_EMP.BAD"
13 NODISCARDFILE
14 LOGFILE "EXT_EMP.LOG"
15 SKIP 1 FIELDS TERMINATED BY ','
16 OPTIONALLY ENCLOSED BY '"' AND '"'
17 NOTRIM
18 (
19 EMP_L CHAR
20 )
21 )
22 LOCATION
23 (
24 'Employess.csv'
25 )
26 )
27 REJECT LIMIT UNLIMITED;
Table created.
SQL> SELECT *
2 FROM EXT_EMP
3 /
EMP_L
PQR
XYZ
MNO
STU
DEF
JKL
6 rows selected.
SQL> SY.

How to get the Ship-To text for an Order from R/3 to CRM?

Hi experts,
how to get the Ship-to-Party text for an Order from R/3 to CRM?
Here I used a Function Module CRM_ORDER_READ and its working in the Development server.
After when this passed to the Stage Server for the Order i am maintaining the same Ship-to-Party for the order in the Stage server and I am no getting the text for that{Text maintained for the Ship-to-Party in the stage server}.
Thanks in advance.

Hello Nilaksha.
You can use the following query. Modify the segment to be queried if you wish.
SELECT cc.segment1||'.'||segment2||'.'||segment3||'.'||segment4 "Account",
nvl(sum(l.accounted_dr - l.accounted_cr),0) "Balance"
FROM gl_code_combinations cc,
gl_je_lines l
WHERE cc.code_combination_id = l.code_combination_id
AND l.set_of_books_id = <your set_of_books_id'
AND cc.segment2 = 'your segment value'
AND l.effective_date <= '30-nov-09'
GROUP BY cc.segment1||'.'||segment2||'.'||segment3||'.'||segment4
Hope this helps.
Octavio

How to get Recolor Artwork tool to let me choose from my color groups

When I use the Recolor Artwork tool to change all the colors on an image at once, I can't figure out how to get it to let me choose from my color groups in my library. I have my library loaded on the side panel, but it won't let me choose from then when I use this otherwise awesome tool. Help, what's the trick?

You mean Edit > Edit colors > Recolor art?
Please show some screenshots of what's happening.

How to get acknowlgmnt from EFT (debt card swap) machine from swing app.

Similar Messages

Maybe you are looking for