How to get path of image from server side in form of URL

Hello,
I want to access images stored on server side local folder. How do I create a URL for that. Images in the folder changes dynamically, so I should be able to display the new modified images. Please help me.
Thanks in advance

Are you asking from client side to access server (local folder) images...
if yes
where the security goes....
please be in detail...

Similar Messages

How can i dispaly an Error Message from Server Side To form

Hi All,
How can i dispaly an Error Message from Server Side To form side .
i try several ways nothing succed.
i put the error in stack and after call the procedure from form i added
Qms$Trans_Errors.Display_Messages;
and because it is an error not informantional error the error screen displayed and enter
in infinite loop acts like flashing .
can any one help me please i use C/S Headstart6i and Designer 6i
thanks alot
radi

hi,
thanks alot lauri.
yr code work only using information message but in error message its still the same .
the error window still flash and enter in infinite loop of executeing the same triggers.
thanks again
radi

How to get session.maintain property on server side?

Is there a way to trap javax.xml.rpc.session.maintain property on the server side in JAX-RPC compliant web service implementation? I would like to know if the client has enabled session.maintain property to true (which false by default). If not, can I specify the web service to be of "Application" or "Session" scope during deployment time? It used to be the case for Apache SOAP processor. I do not see any mention of that in the JAX-RPC spec.
Thanks for any pointers.
-Anirban.

When I first started to work with JAXRPC I had questions about how web services maintained session across multiple calls and also if it was
possible to maintain session across multiple web services. I downloaded
the JAXRPC runtime implementation source code and tell you what I found.
There is a HttpClientTransport class that handles the actual HttpConnection to the server. It checks to see if maintain session is
set to true or false. If it is set to true it appends the JSESSIONID to the header variables of the request.
The very first call gets a response back with header variable
Set-Cookie: JSESSIONID=blahblahblah
The HttpClientTransport looks for it and if it finds it takes the cookie and stores it somewhere. Every call after that will check to see if session maintain is true or false. If true, it will send
the header:
Cookie: JSESSIONID=blahblahblah
Hope that helps.
Mike

How to get the publish method with server side actionscript?

We publish this way at client side:
ns.publish(name, howToPublish);
How to get this howToPublish at server side?
application.onPublish = function(){
//how to know whether the stream's publishing method(live,record,append) here?

I am not sure whether you can know mode of publish via SSAS, best way would be to use Authorisation Plug-in which can intercept you publish request and get the information which you need - in this case mode of publishing.

How to get the client certificate at server side

hi, this is ravikiran
I am working on a project which requires, receiving a signed file from the client side and verify whether the file is signed by a valid certificate that is there in the servers keystore.
I have no idea how to do this.
can anyone help me.
thanx in advance.

[sorry, deleted irrelevant wrong answer]

How to see the image from server

hi,
I have uploaded an image to server using following code. I want to see the image from server now. When i open this page then it show image. But when i want to see this image from server then it shows blank. Whats the problem of my code? Give me solution.
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<%@ page import="org.apache.commons.fileupload.*" %>
<%@ page import ="org.apache.commons.fileupload.servlet.*" %>
<%@ page import ="java.util.*" %>
<%@ page import ="java.io.*" %>
</head>
<title>User Registration page</title>
<body>
<%
boolean isMultipart = ServletFileUpload.isMultipartContent(request);
FileItemFactory factory=new org.apache.commons.fileupload.disk.DiskFileItemFactory();
ServletFileUpload upload =new ServletFileUpload(factory);
List items = upload.parseRequest(request);
Iterator iter = items.iterator();
     while (iter.hasNext()) {
     FileItem item = (FileItem) iter.next();
     if (!item.isFormField()) {
     String path=application.getRealPath("/");
     File tempfile=new File(item.getName());
     File uploadfile=new File(path,tempfile.getName());
     item.write(uploadfile);
     %>
     <br>
<img src="<%=uploadfile%>" height="100" width="100">
<br>
<%=uploadfile%>
<%
item.delete();
%>
</body>
</html>Is there anybody can help me.
With regards
Bina

<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<%@ page import="org.apache.commons.fileupload.*" %>
<%@ page import ="org.apache.commons.fileupload.servlet.*" %>
<%@ page import ="java.util.*" %>
<%@ page import ="java.io.*" %>
</head>
<title>User Registration page</title>
<body>
<%
String filename = "";
boolean isMultipart = ServletFileUpload.isMultipartContent(request);
FileItemFactory factory=new org.apache.commons.fileupload.disk.DiskFileItemFactory();
ServletFileUpload upload =new ServletFileUpload(factory);
List items = upload.parseRequest(request);
Iterator iter = items.iterator();
     while (iter.hasNext()) {
     FileItem item = (FileItem) iter.next();
     if (!item.isFormField()) {
     String path=application.getRealPath("/");
     filename = item.getName();
                     File tempfile=new File(filename);
     File uploadfile=new File(path,tempfile.getName());
     item.write(uploadfile);
     %>
     <br>
<img src="<%=path+filename%>" height="100" width="100">
<br>
<%=uploadfile%>
<%
item.delete();
%>
</body>
</html>

How to get the client identity from the certificate at server side

hi, this is ravi kiran,
I am working on a project which requires, receiving a signed file from the client side and verify whether the file is signed by a valid certificate that is there in the servers keystore.
How can i get the client certificate at server side and check with the certificates already present in the servers keystore.
i have no idea how to do this
can any one help me
thanx in advance

Hi Ravi, did you get any answer to your question ?
I'm also after a similar problem, please share your solution, if you have any.

How do i get a scanned image from my canon printer to my macbook

how do i get a scanned image from my canon printer to my macbook

The Canon printer can be found in the System Preferences > Print and Fax.Click to reveal the list of printers in the left hand side bar. If your model has scan capabilities then you can click the Open Scanner submenu:

How do I get a raw image from "My Pictures" into Photoshop?

How do I get a RAW image from "My Pictures" into Photoshop? When I send it to Photoshop , it shows up as a grey checkerboard. The title is on the top. Whe I try to send a picture from Camera Raw, it does the same thing.

Has it ever worked or is this just something that started happening recently?
Have you tried resetting the photoshop preferences file?
http://forums.adobe.com/thread/375776?tstart=0
Have you installed the latest updates for photoshop cs5?
In photoshop cs5 go to Help>Updates
To post the system info here on the forum it might depend on your browser, but using firefox as an example, you would open the system info in photoshop, press Copy then OK.
Here on the forum you would press the ctrl key and paste.

How do i get a still image from my home movies in iMovie 09

On you tube it how's how to do this on iMovie 08, however, I cant find out how to create a still image from my home movie, and possibly export it to iPhoto,
any help much appreciated

John Codgell has some tips on how to use MPEG Streamclip to do this on this Discussion Thread:
Helpful Answer Re: can you make a still photo from clip

How to get the full image directory when i upload the image to web page???

hai, how to get the full image directory when i upload the image to web page???
here is the example:
<form action="uploadfile.jsp" method="post">
image<input type="file" name="image" />
<input type="submit" value="submit"/>
<%
String s=request.getParameter("image");
%>
<%=s%>
</form>
i upload the image from C:\image\center.gif. i use request.getParameter just can get the image name like "center.gif". Can anybody help me how to get the full path name. Thanks a lot..

There is no need to get the path. It is also fairly pointless as the server cannot access the client's local file system.
Carefully read this article how you can upload files the right way: http://balusc.blogspot.com/2007/11/multipartfilter.html

How to get all the values from the dropdown menu

How to get all the values from the dropdown menu
I need to be able to extract all values from the dropdown menu; I know how to get all those values as a string, but I need to be able to access each item; (the value in a dropdown menu will change dynamically)
How do I get number of item is selection dropdown?
How do I extract a ?name? for each value, one by one?
How do I change a selection by referring to particular index of the item in a dropdown menu?
Here is the Path to dropdown menu that I'm trying to access (form contains number of similar dropdowns)
RSWApp.om.GetElementByPath "window(index=0).form(id=""aspnetForm"" | action=""advancedsearch.aspx"" | index=0).formelement[SELECT](name=""ctl00$MainContent$hardwareBrand"" | id=""ctl00_MainContent_hardwareBrand"" | index=16)", element
Message was edited by: testtest

The findElement method allows various attributes to be used to search. Take the following two examples for the element below:
<Select Name=ProdType ID=testProd>
</Select>
I can find the element based on its name or any other attribute, I just need to specify what I am looking for. To find it by name I would do the following:
Set x = RSWApp.om.FindElement("ProdType","SELECT","Name")
If I want to search by id I could do the following:
Set x = RSWApp.om.FindElement("testProd","SELECT","ID")
Usually you will use whatever is available. Since the select element has no name or ID on the Empirix home page, I used the onChange attribute. You can use any attribute as long as you specify which one you are using (last argument in these examples)
You can use the FindElement to grab links, text boxes, etc.
The next example grabs from a link on a page
Home
Set x = RSWApp.om.FindElement("Home","A","innerText")
I hope this helps clear it up.

How to get the selection parameters from logical database into one of the t

Hi Sap ABAP Champians,
How to get the selection parameters from logical database into one of the tab in the tabstrip selection-screen.
Please help me for this
Thanks
Basu

Hi
Thanks, that will work, but then I'll have to insert code into all my reports.
I can see that "Application Server Control Console" is able to rerun a report.
This must mean that the Report Server has access to the runtime parameters.
But how?
Cheers
Nils Peter

How can I manually attach images from my photo booth (imported into iPhoto) to emails? Auto function, in photo booth has my photos lying sideways?

How can I manually attach images from my photo booth to iCloud emails?
They are imported as 'events' into my iphoto library.
Auto function, in photo booth has my photos lying sideways when placed in 'mail' emails?

There are many, many ways to access your files in iPhoto: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps. If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto not running:
For users of 10.6 and later: You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu.
Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
Show File: a. On iPhoto 09 and earlier: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected. 3.b.
b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected.

How to get auto proxy configuration from plugin?

I need to retrieve the name of the client's proxy server to pass it along to my signed applet (because it doesn't seem to be getting the information automatically despite the fact that the java plugin is set to the use the browser settings for proxies).
The Java Plugin loads the proxy server information based on the browser preferences, but I haven't figured out how to retrieve that proxy information from the Plugin itself. Sometimes the javaplugin.proxy.auto.url system property is null, even if the browser (MSIE) is configured to use an auto-configuration script/url for the proxy server configuration. I can see in the Java Console that the plugin knows the auto-config url, so how can I access that property from within my applet?
Even if javaplugin.proxy.auto.url is not null, I don't know how to call the javascript function at that URL from within the applet to get the proxy server host name and port.
Does anyone know how to get the proxy information from the plugin?

Thank you! Indeed, the answer was there, but I hadn't been able to find it earlier (I guess I was searching on the wrong forums). For those who might be interested, here's the thread that helped:
http://forum.java.sun.com/thread.jsp?forum=30&thread=281981

How to get path of image from server side in form of URL

Similar Messages

Maybe you are looking for