How to pass all values from one node element to created node element?

Hi
I have model node element under which there are 7 values, and I've created value node element and trying to pass the values from the model node Element to this value node element. But instead of passing all the values its listing only one value.
How do we rectify this problem!!!
Thanks in Advance
Srikant

Hi Anil
I've created the node named: TableNode
and the name of the node from which i want to get the data is : Li_Required_Node
the Node Structure is
Context
|_ Zs_Quantity_Input
     |_Output
       |_Node_Required_Node
          |_Schddt
|_TableNode
    |_CmpDate
The Schddt has some 7 values
The code Snippet is as follows:
IPublicPricesComp.ITableNodeElement nodeElement;
IPublicPricesComp.ILi_Required_NodeElement scheduleElement;
int counter3Max = wdContext.ILi_Required_Node().size();
for( int counter3= 0 ; counter3 < counter3Max ;counter3++ )
nodeElement = wdContext.createTableNodeElement();
                         scheduleElement = wdContext.nodeZs_Quantity_Input().nodeOutput_Contract_Qty().nodeLi_Required_Node().getLi_Required_NodeElementAt(counter3);
nodeElement.setCmpDate(scheduleElement.getSchddt());
wdContext.nodeTableNode().addElement(nodeElement);
On writing the above code and then binding the node to a table column only one value getting displayed
Where can be the error?
Thanks in Advance
Srikant

Similar Messages

How to pass the values from one screen to another

HI,
consider me21n,
po is created with the item category L,so components tab is enabled.that u all know.
i have added the custom tab in the item details with netwt,gross wt,no of pieces and one more field.
those fields are also in component structure of material data.
i need to pass the matnr,maktx,quantity,ntwt,grosswt from the component to be displayed in the subscreen.
i used import mdpm to xmdpm from memory id 'subcon', where it is exported from the function module 'me_components-maintain'.
how to pass all the values from component of structure MDPM to the subscreen of custom tab in the item details.
help me pls........................'

hi everyone,
MODULE status_0111 OUTPUT.
data : fill type i.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.,
DESCRIBE TABLE lt_zzmm_po_comp LINES fill.
ctrl_0111-lines = fill.
ENDMODULE.                 " STATUS_0111 OUTPUT
MODULE fetch_data OUTPUT.
ctrl_0111-lines = 2.
import xmdpm to lt_xmdpm from memory id 'SUBCON'.
IF not sy-subrc eq 0.
    CLEAR lt_zzmm_po_comp[].
    LOOP AT lt_xmdpm.
      MOVE-CORRESPONDING lt_xmdpm TO lt_zzmm_po_comp.
      APPEND lt_zzmm_po_comp.
    ENDLOOP.
MOVE-CORRESPONDING lt_zzmm_po_comp TO ctrl_0111.
read table ctrl_0111-cols into col where index = 3.
ENDIF.
ENDMODULE.                 " FETCH_DATA OUTPUT
MODULE pass_line OUTPUT.
READ TABLE lt_zzmm_po_comp INDEX ctrl_0111-current_line.
MOVE-CORRESPONDING lt_zzmm_po_comp TO ctrl_0111.
ENDMODULE.                 " PASS_LINE OUTPUT
flow logic
PROCESS BEFORE OUTPUT.
MODULE status_0111.
MODULE FETCH_DATA.
loop at lt_zzmm_po_comp WITH CONTROL ctrl_0111 cursor
ctrl_0111-current_line.
   module pass_line.
endloop.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0111.
loop.
*module read_data.
endloop.
but i cant see my fields in the table control .....i dont know y it is not coming?can anyone help me with code...

How to pass the value from one page to another page

Dear Gaurav
I have three pages
1-creation page
2-search page
3-creation page
in first creation page I have column name user write a% and submit to that search for that name.
it is going to second page (search page)name a% is passed and search that corresponding value,the corresponding values are not there user will call third creation page and enter the details and save and click back to first page the value is not calling passing from third page to first page I submit the button in 3rd page the error is coming like this.
The requested page contains stale data. This error could have been caused through the use of the browser's navigation buttons (the browser Back button, for example). If the browser's navigation buttons were not used, this error could have been caused by coding mistakes in application code. Please check Supporting the Browser Back Button developer guide - View Object Primary Key Comparison section to review the primary causes of this error and correct the coding mistakes.
Cause:
The view object xxcrmleadmgmtAM.xxcrmleadmgmtVO contained no record. The displayed records may have been deleted, or the current record for the view object may not have been properly initialized.
in first page column name I removed view instance and view attribute the value is passing from third page to first page
my requirement is the value call from 3 to 1 and user will enter remaining fields in 1st page and save the records.
Regards
Mahesh

Hi Mahesh,
Use
OA.jsp?page=/oracle/apps/................&retainAM=Y).
Thanks
Jegan

How to pass the value from one level to another level

Example :
we have secnario for leave process
initiall the user enters the name in first action the personal number should pick from first action to background RFC CO to pick the Payroll admin from R/3
i designed the first data input form.... i want to pick the personal number and pass that one to next action in background mode.
thanks in advance
sukumar

Hi,
If you want to execute the step in background then you can use the callable object of type "Background Execution" or if you want to do any user interaction on that step then you can go for web dynpro callable object. Here is the link for Background Execution callable object.
http://help.sap.com/saphelp_nw70/helpdata/en/9a/e8934258a5ca6ae10000000a155106/frameset.htm
Here is also link for Web Dynpro Callable Object
http://help.sap.com/saphelp_nw70/helpdata/en/de/8976417f2d5558e10000000a1550b0/frameset.htm
If you have any conficution please let me know.
Thanks
Chandan

How to pass a value from one component to another component in webdynpro

I have created component which consists of alv display and in the alv table I have created pernr has link and when I click that pernr the second webdypro component opens which I have created . now in the second component I want that pernr value. based on that I want to fetch some data.

See i have this code for example which calls the browser with concatenated URL:
CONSTANTS: l_c_url_part1 TYPE string VALUE '?sap-system-login-basic_auth=X&sap-client=',
                     l_c_url_part2 TYPE string VALUE '&sap-language=EN',
                     l_c_url_part3 TYPE string VALUE '&PARAMETER1=',
                     l_c_url_part4 TYPE string VALUE '&PARAMETER2='.
CALL METHOD cl_wd_utilities=>construct_wd_url
               EXPORTING
                 application_name = 'ZTEST'
               IMPORTING
                 out_absolute_url = l_v_url.
             CONCATENATE l_v_url l_c_url_part1
                         sy-mandt l_c_url_part2 l_c_url_part3 'VALUE1' l_c_url_part4 'VALUE2' INTO l_v_url.
             CALL FUNCTION 'CALL_BROWSER'
                 EXPORTING
                   url                           = l_v_url1
                   new_window             = 'X'
                 EXCEPTIONS
                   frontend_not_supported = 1
                   frontend_error         = 2
                   prog_not_found         = 3
                   no_batch               = 4
                   unspecified_error      = 5
                   OTHERS                 = 6.
               IF sy-subrc <> 0.
                 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                         WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
               ENDIF.

How to get a value from one item into another

How can i get value from one item into another item.
Ex: I have a report, in there i have check boxes, and when i have checked some rows, and press submitt, a prosses computates it into a item on another page, and a branche redirects to page 3. Then i'm going to use the value in the item into a PL/SQL script in an report to show the submittet items.
How can i do this?
Computation script, pages and all that is fixed. But i dont know which PL/SQL statement to use to get th value from the item.

Hi Fredr1k,
Use the V() function from pl/sql.
e.g. V('P3_MY_ITEM')
will return the value of that page item.
As long as the pl/sql is called from within the Apex environment.
Regards
Michael

How to pass multiple values from workbook to planning function ?

Hi,
I have created Planning function in Modeler and it has one parameter(Variable represents = Multiple single values).
When executing the planning function by create planning seq. in the web template : I see value of variable store data like ...
A.) input one value -> V1
B.) input three values -> V1;V2;V3
This function execute completely in web.
However, I want to use the planning function in workbook(Excel).
The value of variable can't input V1;V2;V3... I don't know how to pass multiple values from workbook to parameter(Multiple single values type) in planning function ?
thank you.

Hi,
Please see the attached how to document (page no 16).
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be">how to</a>
Hope this was helpful
thanks

Passing the values from one pgm to another pgm (Calling pgm has no sel scr)

Hi gurus,
In my requirement i need to pass the values from one program to another program.
I am using SUBMIT statement . But , the program which i am calling has no selection screen.
So how can i pass the values?
Please help me ASAP.
Regards,
Bhanu.R

Export your internal tables or work areas to a memory id in ur program before u use submit.
Then in second pgm you have to import from memory id given above.
example.
EXPORT gs_header FROM gs_header to memory id 'HEADER'.
EXPORT gt_item FROM gt_item to memory id 'ITEM'.
SUBMIT YFIIN_DISHC_MAILREPORT EXPORTING LIST TO MEMORY AND RETURN.
In your second pgm you can write
import gs_header TO gs_header from MEMORY id 'HEADER'.
import gt_item TO gt_item from MEMORY id 'ITEM'.

How to pass the value from Sub report to main report

I have un report(mainreport) within a subreport(subreport).
With reporting services, how to pass the value from Sub report to main report?
thanks

Hi Alebet,
With reporting services to pass values from sub report in to main report is not supported directly.
But there are some workarounds through which you can get this .
There are two ways to get this.
1- Put your sub report query into some table. i mean to say through the subreport query get some temporary table.
2- Using this temporary tables data write some Scala function in the data base.
3- Now in your main report query return this scala function as a column.
4- Extract the column value where ever you want in your main report which is getting calculated from the subreport query. so you will be getting the values returned from the subreport in the main report.
This will definitely work fine as i have done some report in this way.
Another way of doing is that
1- prepare another data set with the same query as in sub report in the data tab.
2- then refer this 2nd dataset in your main report .
But better way will be the top one.
Anyway please let me know if you get the solution.
Thanks
Mahasweta

How to pass a parameter from one action1 in block1 to action2 in block2.

Dear Experts,
How to pass a parameter from one action1 in block1 to action2 in block2.
My Process Structure is as follows..
       Process
            Sequential Block
                 Action 1
                 Parallel Dynamic Block
                         Sequential Sub Block
                         Action 2.
while i am trying to execute the action1 the following error is shown below:
Cannot complete action: The activity could not be read.
Please suggest me how to do?
Regards,
Rajesh N

Hello Rajesh!
I think you are talk about the mapping parameters of your process.
This case in design time of your workflow, you have the vision of your blocks and actions, you have on action 1 the output parameter and you have the action 2 an input parameter.
So you have that make a group mapping on your process, map in this group the action1 outpu parameter with the action2 input parameter.
Regards, Ronaldo Rampelotti

How to transfer all materials from one plant to other plants?

How to transfer all materials from one plant to other plants?

Hi
To transfer stock in one step between plants belonging to same company code use movement type "301" and using transaction code "MIGO". IF you like in two step it helps to monitor stock in transit use movement type "303" and "305".
303 Transfer posting plant to plant in two steps - removal from storage
305 Transfer posting plant to plant in two steps - placement in storage
to transfer stock between plants of diffrent company code go for stock transpor order using tcode "me21n"
hope it helps

How to delete the values from TKOMV at runtime after creating PO

Hi,
How to delete the values from TKOMV at runtime after creating PO from IDOC. I am creating PO through IDOC, subsequently need to create Sales order and again need to create 2nd PO with reference of Purchase Requestion(created with sales order). At the time creation of 2nd PO the Header conditions are appearing twice and net price value is appearing wrong.
Thanks in advance.

Hi Padma
Can you do this activity once the company code is in to production. I guess you can not do this activity, if the company code is already in to live. Setting or resetting of the recon accounts will hinder the previous actitivity. Infact resetting of the company code is also not a good option.
Any how, thanks for the inputs. Please let me know whether i can do this activity only at the subledger level which will not impact other modules. The one solution i can figured out is , reverse all the transactions for the corresponding asset in the year of takeover and pass the entries again in the same year correctly which will have effect in Subledger and also in general ledger. But the business people will not allow this, since for a big client it will require lot of authorizations and approvals. Infact the vendor also, is cleared. So we have to reverse the cleared documents as well which is again a task and require approvals as well.
Thanks and regards
Seshu.

How to pass the values from the Wb Dynpro Application to the SAP Backend ?

Hi All,
Good morning..,
I have scenario like:
I want to pass the values from the web dynpro appication to the SAP Back end R/3 Table. IN backend the RFC is writtn to accept the structure input from the Webdynpro.
Upto know I imported the corresponding RFC and maaped to the View.
How to proceed with the coding to save the data...
PLease suggest...
Regards and Thanks in Advance,
CSP

Hi Pradeep
Steps:
1. First create an instance for bapi and bind the instance to the bapi node.
Z<bapi name> zb=new Z<bapi name>();
wdContext.nodeZ<bapi name>. bind(zb);
2. Then if u have the import parameter u have to set them by using
    The instance of the above bapi.
    Zb.set<import parameters>;
3. If the bapi has a table parameters then the structure for the table parameters will also be imported
   In the model class.
4. Set the table parameters by creating the instance for that structure and using this instance set it.
   Z<Struct>itm tab=new Z<Struct>();
   Tab.set<table parameters>
5. Then add the structure instance to the bapi instance.
    Zb.add(Tab);
6. Then Execute the bapi after setting the import parameters.
7. If there is any export parameters, then get the values after execution.
Look at this thread for codes
Re: RFC call on click of button
Regards,
Arun

Unable to pass the values from one report to another using navigation links

Hi All,
I am facing a strange issue where I have to pass a column value from one report to other.
I have kept navigation link in the 1st report and 'is prompted' option in the 2nd report
Issue was , I'm not getting the filtered result in the 2nd report (all the records are being displayed)
Can anyone advice where I was going wrong
Thank you,
AO

Hi,
The column which you have given navigation link and 'is prompted' column should same and exist in both the reports.You have to give the guided navigation in the value interaction of the column in the report1.
mark if helpful/correct.........
thanks,
prasanna

How to pass a value from the report to a form ( BIT OF URGENT ).

Hi,
I had created a "Form on a Table with Report" on the report I had remove the edit link and set one of the column feilds that functionality. Now I want to know how to pass that value that is clicked ( having hyper link ) on to the form where it runs a SQL query and then displays the reuslts on the form.
Illustrating with an example.
I am having these following columns on the report ( these are the results for the join statement )
JOBNUM JOBNAME DEPTNUMBER SAL EMPNO LNAME FNAME
In the above JOBNUM is having Hyper link as I removed the edit image.
Now this is area I am having problem. When the user clicked on the JOBNUM then on form it should display 20 other columns( pulled from 5 other tables ) which are related to that particualr JOBNUM.
Anybody give me a solution in which area I have to include my SQL statement and how to pass that selected value to that SQL statement.
Cheers,
Krishna

Hi Ron,
I am doing exaclty what you have suggested me but no luck. I started changing the DEMO_CUSTOMERS application to my requirements.The report is working fine and on the report I have created a page attribute to the Hyper linked column and linked that to the page 2 and assign that attribute with #JOBNUM#.
I am able to pass that value on to form when I click on the JOBNUM. But the problem is I am not able to pass that value into the SQL query so that my query pulls 20+ columns on to the Form ( which is second page ).
Small clarification... On the form region it is said FORM NAME and type is HTML is that is the way the APEX was designed or does it need to say region type as FORM.
Thanks for your help in advance.
Cheers,
Krishna.

How to pass all values from one node element to created node element?

Similar Messages

Maybe you are looking for