I have created a slide show with pictures and music in Iphoto and when I try export it I get Error You do not have sufficient permission for this operation.

I have created a slide show with pictures and music in Iphoto and when I try export it I get Error You do not have sufficient permission for this operation.  Try to export to an external HD attached, all help would be gratefully received 

Have you ever successfully saved anything to that external drive? My first two thoughts are that the drive isn't formatted for the Mac or that you don't have rights to save to the drive.

Similar Messages

  • I have created a slide show with music but when i view it or attempt to burn to a CD or even copy to hard drive after about 15 sec the program stops working and it shuts down

    Elements 10 was deactivated on desktop and installed on new laptop.  Have on
    y used it for photo editing until yesterday. Created a slide show with music but every time I try to burn to cd or move it to hard drive after about 15 sec, it says windows has encountered a problem with this program and must shut down.
    I Also can't sign in to adobe with the program. It simply spins and I had to force close the program.
    help!?

    I am using photoshop Elements 10 under the create tab...slide show.
    Used it on my desktop several times. Deactivated it and installed on new lap top about 5 months ago.  Had not used it other than for photo editing until today.
    I can also not login in thru the program. It simply spins and I finally had to force close the program
    Toni V. Sloan
    Sent from my iPad
    On Jun 27, 2014, at 7:03 PM, Chris Cox <[email protected]>
    I have created a slide show with music but when i view it or attempt to burn to a CD or even copy to hard drive after about 15 sec the program stops working and it shuts down
    created by Chris Cox in Photoshop General Discussion - View the full discussion
    Photoshop doesn't do slideshows… What software are you using?
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6504356#6504356
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop General Discussion by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • HT1386 I get an error message when I try to sync my iPod touch - "you do not have enough access privileges for this operation"

    I recently installed a new hard drive on my PC, downloaded iTunes, updated the software on my iPod touch and now I get this error message when I try to sync:  "you do not have enough access privileges for this operation."  It never did this before, whether it's the upgrade in software or something in iTunes, but it's very frustrating, since I'd like to add more things to my iPod.

    See:
    iPhone - not enough access privileges: Apple Support Communities

  • I have created a slide show for a funeral buts it is taking too long to transfer to sub (like 24 hrs  ). Is this normal or should I be doing this another way ?

    I have created a slide show for a funeral buts it is taking too long to transfer to sub (like 24 hrs  ). Is this normal or should I be doing this another way ?

    Not the only one. Though I have not retryed my installation. Here is what happen to me and please verify if you had the same (sounds like it).
    1. Installed 10.8.4 on top of 10.8.3 and install went fine.
    2. I have installed a Niffy Drive (though no SD in it) ... but did not realize potential problem you suggest.
    3. its a MBPr
    4. Boot took for every (it 40 seconds from after I logedin to system screen on 10.8.3) but after (ie on 10.8.4) took forever 10-15 minutes with a cursor in the upper left on a white/gray screen.
    5. I reinstalled to 10.8.3 and all works as before
    6. But sounds like after removing niffy dirve I should reinstall??? Ie the problem I described was the same as yours.

  • I just created a slide show with iPhoto 11 on my MacBook Air.  How do I save this to a DVD on my external drive so that it will play on a DVD player?

    I just created a slide show with iPhoto 11 on my MacBook Air.  How do I save this to a DVD on my external drive so that it will play on a DVD player?

    Hi
    If there is no iDVD on Your Mac (and it's not on newer Macs as Apple discarded it) then You need a program that can do this.
    Your Mac can burn CDs and DVDs - BUT DVD as Data-DVDs not as Video-DVDs - they need a program to be encoded and STRUCTURED as such.
    • iDVD is part of the boxed version of iLife'11 and can only be bought outside Apple as on Amazon and e-bay
    • DVD Studio pro - Part of FinalCut Studio Pro bundle - this to has expired and can only be bought second handed. (High price and tough learning Curve - but best ever done.)
    • Roxio Toast™ - Not as elegant as iDVD - but has many other positive additions (I like it as 10-Pro incl BD-component) (now version 11)
    • Burn - only free alternative I know of on internet. Very simple - Just for doing a plain Video-DVD
    Burn http://www.digital-digest.com/software/Burn.html
    only You can buy from Apple is
    • FinalCut Pro-X which also can burn to DVD but without any nice themes.
    AppleMan1958
    You can also buy Compressor from Apple for $50 US. It will also create DVD and BluRay but without the nice themes.
    Yours Bengt W

  • How do  create a slide show with both video and photos in elements 12

    how do  create a slide show with both video and photos in elements 12

    Hi Brian
    You can batch process a set of prepared slides from Full Edit (see image) using:
    File >> Process Multiple Files
    In the PMF dialog you can choose filename, date, or description (caption)
    Make sure you choose a separate destination folder to your source folder so as tot to permanently overwrite your originals.
    Click image to view

  • While trying to access  i phone through pc (windows 7 ) showing error 'you do not have permission to access this device '

    while trying to access  i phone through pc (windows 7 ) showing error 'you do not have permission to access this device '
    And while trying  to unlock screen after lock , slide not working 'slide to unlock'

    Hello there, charialji.
    The following Knowledge Base article offers some great steps for troubleshooting your issue:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Resolution
    If a single application is not responding or stops responding when it opens, you can force it to close.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I have an IAMc 4.1 with intel core duo.  Upgraded from tiger to snow leopard but cannot get safari to run in 64 bit.  Is this because my older IMac won't support 64 bit?

    I have an IAMc 4.1 with intel core duo.  Upgraded from tiger to snow leopard but cannot get safari to run in 64 bit.  Is this because my older IMac won't support 64 bit?

    Hi,
    the Intel Core Duo processor is a 32-bit only processor and not capable of 64-bit.
    Only the Core 2 Duo and later processors are capable of 64-bit.
    Sorry
    Stefan

  • Dashboard Designer Error - You do not have sufficient permissions to complete the request.

    Hi all
    I have created a PerformancePoint Data Source library and a PerformancePoint Reports list on a SharePoint site. The PerformancePoint site collection and site features are also both activated. The data source library is in
    the 'trusted data soruces' list in administration. Existing reports I have created show OK on the site.
    When user, who has full control of the entire site, clicks "add a new item" in the BI Reports list, SharePoint launches Dashboard Designer OK.
    The problem is when Dashboard Designer loads, it does not load the existing data sources & reports. Clicking on the refresh icon results in the error:
    You do not have sufficient permissions to complete the request.
    If I add this user to the Site Collection Administrators list, the user can refresh and view the data sources & reports OK. Is this a requirement to create reports in Dashboard Designer? It is not acceptable to set all
    our report designer users as the site collection administrator.
    Cheers
    Tyson

    Hi,
    Have you also tried to assign rights using the technique mentioned in the above given document (i.e. using Dashboard Designer):
    Important To assign or change user permissions for dashboard items, you must have
    Full Control permissions. Although you can create and publish dashboard items with
    Design permissions, you cannot assign or change permissions for dashboard items unless you also have
    Full Control (Site) or Site Collection Administrator permissions.
    Use the SharePoint Permissions dialog box to assign or change user permissions for a dashboard item. You can open the
    SharePoint Permissions dialog box from Dashboard Designer or from the SharePoint list or document library that contains the dashboard item. The following sections describe both methods.
    Edit user permissions in Dashboard Designer
    In the Workspace Browser, click PerformancePoint Content or
    Data Connections, depending on the item that you want to modify. Then, in the center pane, double-click the dashboard item to open it for editing.
    In the ribbon, click the Home tab, locate the Item group, and then click
    Permissions. A browser window opens, which enables you to view or change the SharePoint permissions for the dashboard item that you opened.
    Use the SharePoint permissions dialog box to modify the user permissions for your dashboard item, and then save your changes.
    Edit user permissions in a SharePoint list or document library
    Locate the dashboard item that you want to modify in its SharePoint list or document library.
    Select the check box that is next to the name of the dashboard item. At first glance, you might not see a check box next to your dashboard item. The check box is visible when you put your cursor next to the
    Title column, which is located next to the name of the dashboard item. The ribbon appears in the SharePoint site.
    In the SharePoint ribbon, click List Tools, and then click
    Items. Locate the Manage section, and then click
    Document Permissions. A SharePoint Permissions dialog box opens. This enables you to view and change the user permissions for the item that you selected.
    Use the SharePoint Permissions dialog box to modify user permissions for your dashboard item, and then save your changes.
    Please tell us if this approach shows different permissions assigned and solves your problem.
    Thanks and best regards,
    Martin
    Martin W. Angler, MCTS
    Blog angler.wordpress.com
    Twitter: Follow me on twitter

  • ERROR: You do not have enough privileges to add this item.

    On any new web App Items , or any new Web Apps created getting the message when attempting to do update (logged in as user and can access the item in edit)
    ERROR: You do not have enough privileges to add this item.
    The same user id can do updates to other web app web app items that already exist, the user is assigned and can login and select edit and add the content , but submit the web app item update results in succfull update.
    What does the message ERROR: You do not have enough privileges to add this item specifically indicate when the user is
    assigned to the web app / web app item,
    web app is designated as edit enabled for assigned user
    item is active and
    can update other web apps and can login to the web app in question but
    can not update newly created items without the message.
    Appears to me any web app that is new or modified is getting the error, existing ones are ok.
    (happens on different browsers, cache cleared, logins not remembered, manual login actioned)

    Hi,
    I've checked your site users and it show each having full administrative permissions. 
    Unfortunately I'm not sure why this error would prompt otherwise.  Please reach our direct chat support to help investigate this further if the error continues. 
    Kind regards,
    -Sidney

  • Windows Vista Bonjour error "You do not have sufficient access..."

    My Windows Vista laptop recognizes my HP PSC 1310 printer connected as a USB printer with Airport Extreme. It even has the correct driver. When i go to finish set up i get an error "You do not have sufficient access to your computer to connect to the selected printer". I am doing this as an admin on my PC. The printer works correctly on my Macbook. The guidance given by apple is no help at all. Any ideas?

    I experienced the same general problem and did find a manual workaround in my particular instance. Hopefully this is helpful to anyone who's facing the same situation.
    MY SETUP: installing a hp LaserJet 1012 that's tethered to a wireless Time Capsule (home network) on a virtual VISTA platform running within Parallels 4.0.3810 on an iMac OS 10.5.6.
    THE PROBLEM: WinXP (also virtual) connected to the printer through BONJOUR FOR WINDOWS without any problems. However, doing the same in Vista resulted in a last step termination of installation with the following message from Vista: "You do not have sufficient access to your computer to connect to the selected printer." Lovely.
    Turns out, according to Microsoft (link: support.microsoft.com/kb/946394/en-us Help and Support Article ID: 946394 - Last Review: January 24, 2008), the problems is due to "the Hewlett-Packard (HP) print driver uses an HPBmini.dll file ("HP Mini Installer") whose version is earlier than 1.0.0.13."
    My workaround was to simply install the network printer manually via ~ (the following are the choices that I clicked on in VISTA)
    Vista Control Panel > Hardware and Sound > Printers > Add a printer >
    Add a network, wireless or Bluetooth printer >
    The printer that I want isn't listed >
    Add a printer using a TCP/IP address or hostname >
    CHOOSE - Device type: Autodetect
    INPUT - Hostname or IP address: "Time-Capsule"
    (which is the specific hostname in my case, the hostname can be found by going to OS X System Preference > Print & Fax > click & highlight the printer installed on the local network in OS X and look for the hostname after "Location:". Remember, Windows do not do spaces, so if there are any spaces in your hostname be sure to substitute a dash "-".
    SELECT - "Query the printer and automatically select the driver to use" >
    Device Type > Standard | Generic Network Card > Install the printer driver* >
    (*Here's the tricky step, since you don't want to use an old driver which would bring up that old insufficient access message, but you do have some options:
    a) you have a known VISTA COMPATIBLE driver from the manufacturer (net downld);
    b) the "Add Printer Wizard" window may contain a driver for your specific printer or a similar printer. Also, try the "Windows Update" button to refresh the choices if you can't find it the first time; and finally,
    c)"Generic" is a legitimate choice in the Manufacturer window if you can't find any better options.)
    From there, it's just Next > Next > and choose to share printer, etc. to finish up.
    Luckily, I got through to "Print a test page" and it all works without the annoying "insufficient access" message.
    Best of luck to you.

  • Get error message when syching iPod, iPod cannot be synced. You do not have enough access priveleges for this operation.  How to solve this?

    Get error message when syching iPod, iPod cannot be synced. You do not have enough access priveleges for this operation.  How to solve this?

    Hello FranBNYC
    It sounds like a permissions issue with your library, check out the article below to check and make sure that things are set correctly.
    Trouble adding music to iTunes library or importing audio CD
    http://support.apple.com/kb/ts1387
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Error: You do not have sufficient access to perform a lock on this database

    Hi,
    Can anyone help on this.
    When user try to load data through Excel it throws the following error "You do not have sufficient access to perform a lock on this database"
    We are using Essbase 6.5.
    We have tried following options
    FIX1:
    In Microsoft Excel, under ESSBASE -> OPTIONS, under the MODE tab, the check box UPDATE MODE is checked.
    When the UPDATE MODE check box is selected retrievals will automatically lock the corresponding database area with each retrieval. Disable Update Mode to stop locking blocks automatically. In update mode, the Send command (which updates the server with data values from the spreadsheet) does not automatically unlock data after the send.
    1. Launch Microsoft Excel
    2. Select ESSBASE -> OPTIONS
    3. Select the MODE tab
    4. Uncheck "Update Mode" to return to normal mode
    This error is seen when trying to lock and send data via the Hyperion Essbase Spreadsheet Add-in into that fall within a replicated target partition definition
    1. Go to HYPERION APPLICATION MANAGER -> DATABASE -> PARTITIONMANAGER
    2. Select the relevant partition
    3. Select EDIT
    4. On the CONNECT TAB, select SETTINGS and tick the option THETARGET PARTITION CAN BE UPDATED
    Also gave write access to that user.
    Can anyone give another possible solutions.
    With thanks,
    babu

    Hi Raja,
    Check this out../
    Weird problem regarding Essbase Excel plug in
    It might help
    Regards
    Amarnath

  • Bonjour for windows gives this error - You do not have sufficient access...

    I installed Bonjour for windows on a PC running XP. When I run the Bonjour app from windows I can see the printer I wish to connect to. It is shared off of my G3 server. When I try to connect I get the following error,
    "You do not have sufficient access to your computer to connect to the selected printer"
    I have done some research through Apple's info database and found,
    http://docs.info.apple.com/article.html?artnum=302408
    I followed the instructions and still I get the same error. I have rebooted the PC deleted all the printers under the printer window. But no luck. I found a similar request by another apple forum user. His issue was the same but he was using 'Parallels' emulator. But no solution was provided.
    Any suggestions?

    Well this is what I've done to date to try to resolve this issue.
    I uninstalled Bonjour for Windows from my PC. I checked Apples support pages dealing with Bonjour for Windows (BfW). As suggested I deleted all printers in my printer window, (to delete all possible print Queues). I updated my Windows to the latest patch for XP. I reinstalled BfW, with the XP Firewall turned on. It is suggested that BfW will make the necessary changes to the XP firewall to allow traffic going through port 5353. I have tried more than one printer off of my G3 and I double checked my external router port restrictions, and I turned off the firewall on my G3, shared mt printers in OS X, and even turned on windows file sharing. I even updated my G3 to 10.4.8
    I pinged my G3 from my XP machine it's there. Also I can see the G3 with it's printers when I browse the network from the XP box. Also I'm on the same local subnet 192.168.2.x
    The only thing I have not done yet is see if it is possible to ping a bonjour host (my G3) from a bonjour client (XP box). That would at least verifiy the 5353ports.
    Anyone have a bonjour utility to do that? Probably have to run in a Windows enviroment. Or can a ping packet be directed to use a particular port?

  • Error: "You do not have suffficient access to perform a lock on this database

    Hi, <BR><BR>I have a problem with Essbase Excel Add-in, i can´t retrieve because appears this error: Error: "You do not have suffficient access to perform a lock on this database<BR><BR>Plese, help me. Idon´t have speak inglish.

    If the problem is limited to a single PC, I would suggest that you uninstall the Essbase client on that PC, reboot, and the reinstall the client including the addin. <BR><BR>It appears that some sort of macro is running on that PC that does teh login in update mode. I'd also remove all copies of any excel spreadsheets that might be involved, copying a clean version from another PC.<BR><BR>If you are using any third-party tools, like toolbars or other addins for excel and essbase, I'd clean them out also. <BR><BR>You haven't said whether a login from an new, blank spreadsheet works. If it does, the problem is in the spreadsheet you are using to retrieve the application, otherwise, the problem may be in a corrupted add-in, or even possibly with your excell installation.<BR><BR>It's hard to diagnose a problem when you haven't given us any more information about the problem. You haven't really answered any of the questions we've asked about behaviour and whether the problem existsin certain other circumstances. I'm certain that if language is a problem, someone might be able to help you in some language other than English, but generally this forum works in English because it a a common language in the Hyperion community.

Maybe you are looking for

  • Preventing the deletion of a PO with IR but no GR

    Hello guys, I am facing a requirement to prevent the deletion of non-GR related Purchase Orders. The POs are still marked as complete since an invoice has been released. When trying to delete complete GR related POs, we are getting the following mess

  • XML Schema validation error in network configuration. Missing DnsRef

    When ever we try to make changes to a Virtual network we receive XML Schema validation error in network configuration. Missing DnsRef We can't make any changes to the Virtual network. The DNS ref exists as well. Considering exporting network config a

  • On line storage

    I purchased a new computer with windows 8.  I had photoshop 8 on my old computer and have installed photoshop 10 on my new computer.  How do I download photos/folders from my online backup to my new computer and photoshop files

  • Frustrated...iPad 2 Mac OS X (10.7.5) sync with iTunes

    I am trying to sync my iPad for the first time with my iMac.  iTunes is sending an error message.  "iTunes cannot sync apps on the iPad because the apps installed in the iPad could not be determined.  What do I need to do?  I purchased an iPhone and

  • What is my voucher number to my mobile C6?

    What is my voucher number to my mobile C6?