I want al earlier version of logic pro to use for my powermac ....how to obtain?

How do I obtain a earlier version of logic pro for my powermac? I have a recent one on my macbook i retrieved from the online mac store... can I get an earlier version from the place online? If so how?

Try eBay.....

Similar Messages

How can I upgrade the solo version of Logic Pro 9 to Logic Studio?

I just would like to know how and where to upgrade logic pro to logic studio

First of all, Erik is correct.. Logic Studio has been discontinued.. However, there are a few copies left around I am sure... to purchase if you really wanted to...
But.....
Unless you really want Waveburner and Soundtrack Pro 3..(Neither of which have been updated for at least a couple of years now..) there is little point in buying Logic Studio 2... as it will cost you $499... and you can buy Compressor and Mainstage (the other two parts of Logic Studio) for much less than that on the App Store.... and the additional content (that actually took up most of the DVDs in the boxed set) can be downloaded for free within Logic Pro itself.
I think a newer version is soon to be announce.
Not of Logic Studio there won't be.. I believe boxed sets of Logic are long dead and gone... and won't be seen again... It's all App Store products from now on...
There may well be a newer version of Logic Pro on the way.. but no one knows when.... until Apple announce it.

Where can i find a chinese version of logic pro 9 user manual

Can anyone tell me is there any user manual in chinese for Logic Pro 9?

First of all, Erik is correct.. Logic Studio has been discontinued.. However, there are a few copies left around I am sure... to purchase if you really wanted to...
But.....
Unless you really want Waveburner and Soundtrack Pro 3..(Neither of which have been updated for at least a couple of years now..) there is little point in buying Logic Studio 2... as it will cost you $499... and you can buy Compressor and Mainstage (the other two parts of Logic Studio) for much less than that on the App Store.... and the additional content (that actually took up most of the DVDs in the boxed set) can be downloaded for free within Logic Pro itself.
I think a newer version is soon to be announce.
Not of Logic Studio there won't be.. I believe boxed sets of Logic are long dead and gone... and won't be seen again... It's all App Store products from now on...
There may well be a newer version of Logic Pro on the way.. but no one knows when.... until Apple announce it.

Latest Version of Logic Pro?

Just wondering...what is the latest version of Logic Pro?

Logic has Garageband the way FC has iMovie.
FC has been brought closer to iMovie so it's seemingly easier to use, It's now a "prosumer-grade" product. All I'm saying is I don't want a version of Logic that's moved closer to Garageband.
This could quite easily happen here.
As I said though, time will tell.

I purchased a Logic Pro 9.1.6. from App Store and when I try to open it, it's asking for a serial number. That shouldn't happen, they told me on Applecare Professional Application Support. Once I had a "trial version" of Logic Pro 9.0.0. Does this matter?

I purchased a Logic Pro 9.1.6. from App Store and when I try to open it, it's asking for a serial number. That shouldn't happen, they told me on Applecare Professional Application Support. Once I had a "trial version" of Logic Pro 9.0.0. Does this matter?

ufo62 wrote:
Yep, there's versions and "versions". But I'm a poor, stupid guy and now I had my first chance to get The REAL Logic Pro. So please, if somebody could help me with that I would be grateful.
You would need to delete all of the Logic Audio related preference files, reciepts...etc, located in these folders.
~/Library/Preferences
Users/YourName/Library/Preferences
~/Library/Receipts
And possibly
~/Library/Applicationsupport/ProApps
I guess it's possibly safe to assume that all of the people posting on this board asking why the App Store version is requesting a serial have been using pirated software.

Is there a version of Logic Pro X that can be installed on a Mac Book Pro with OS X Version 10.7.5 ?

Is there a version of Logic Pro X that can be installed on a Mac Book Pro with OS X Version 10.7.5 ?

No.. Logic Pro X requires 10.8.4 or later....
To Purchase and install Mountain Lion these days.. you must buy a download content code from Apple directly... It is no longer available directly via the Mac App Store as an item you can select and buy...
If you are in the US then this link will help you...
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

How do i downgrade to previous version of logic pro x

Im asking cause the 10.0.5 verson does crazy delay problems, cant bounce with virus ti2 polar.. well just crazy.. I need to try a previous version of logic pro x to check..

You can only do that if you have a backup of an older version. In that case: just replace the application.

TS4498 Is music created in logic pro compatible with the logic pro x ? for instance if you have created something in logic pro and wont to add or tweak it a bit is that possible?

Is music created in logic pro compatible with the logic pro x ? for instance if you have created something in logic pro and want to add or tweak it, is that possible? I suppose you would need the original logic folder?

Yes it is more or less compatible, except the use of 32 bit plugins, which is prohibited from now on. So although you're able to open Logic projects as far as down to v5 I believe, it is advisable to remain for 'adding and tweaking' in your pre LPX environment.
Have a nice day!

How can i know my logic pro 9 is for 3 install's?

how can i know my logic pro 9 is for 3 install's?

Logic Pro 9 (the DVD version) can be installed on a notebook and a desktop (2). The Mac App Store products can be installed on all Macs that you own. If you need a volume license (e.g. for a school) you should contact Apple.

Why Does Logic Pro Repeatedly Asks for Serial # and XSKey When Started?

I've purchased and installed an upgrade to Logic Studio 9. I previously used Logic Pro 7 but did not have it installed on my MacBook Pro when I installed Logic Studio 9.
The installer asked for the Logic Studio 9 serial number which I entered and then prompted for the original serial or XSKey. I dug out the Logic 7 XSKey, plugged it in and it was accepted so I could continue with the installation which completed successfully.
So far so good.
But now Logic Pro 9 asks for the serial number and XSKey every time I run Logic which isn't what I expect. I re-enter the new serial number and then plug in the XSKey which is accepted and the software runs as expected, but I would prefer not to have to do this every time I start the application, in particular because I don't want to carry the XSKey around with me at all times.
Why isn't Logic 9 storing my serial number? Why does it ask for the serial # and XSKey every time I start the application?
I'm not running Logic as an admin user. Could this be preventing Logic from storing the serial information?
Any help would be greatly appreciated.

I had this when upgrading from 7 to 8. What I did was plugin the xskey BEFORE I started the upgrade and it never asked for a key or serial again after that.

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. How do I get it to stop?

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. What is causing it and how do I get it to stop? My sound is running through the Saffire Pro 40 Interface (Focusrite) into external speakers with powered amps.
Also, When I record I am hearing little pops in the system. I have checked all of my meters and they are not clipping. What is causing it and how do I get it to stop?
Ken

MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter-

I am using logic pro x and do not know how to fade a track at the end of a song or change the volume in a portion of the track.

I am using Logic Pro X. I do not know how to fade the volume at the end of a song or raise / lower the volume in an area of the track. I also have a loud instand volume blip in a portion of a track that I would like to lower or eliminate.

Hi
rmarlia wrote:
I am using Logic Pro X. I do not know how to fade the volume at the end of a song or raise / lower the volume in an area of the track. I also have a loud instand volume blip in a portion of a track that I would like to lower or eliminate.
Armadillosound wrote:
To create a fade out press T to open the tool menu and select the fade tool.
Completely inappropriate, and they all also not help with volume adjustments. Fades will only apply to Audio Regions in the Tracks area: they will not fade out the complete mix unless you first Bounce it, add that to the Tracks area, apply the Fades with the Fade tool, then Bounce in Place (Again).
Much much better to make use of Track automation to take care of Volume adjustments, and to Fade out the end of the song by applying Track Automation to the Output Channel
https://help.apple.com/logicpro/mac/10/#lgcpb1a1ea03
CCT

Has anybody downloaded logic pro from the app store and how did it work thanks

has anybody downloaded logic pro from the app store and how did it work?
thanks

I've recently upgraded my stuff with a Mac Mini Server and downloaded Logic from the app store with absolutely no problems at all. I'm on 10.7.3 with an i7 processor and 4Gb memory (yeah, may as well put another 4 in as well, I know).
Logic 9.1.6 is running very smoothly for me, but I think I'll go to 9.1.7 because there is a malfunction with time stretching regions in the Arrange window that the update's meant to fix.
A lot of your experience with downloading the additional content, apart from Logic itself, will depend on the speed of your internet connection, but the software handling of that aspect seems quite good - best to just load one lot of stuff at a time and see how it works out.

Has anybody downloaded logic pro from the app store and how did it work

has anybody downloaded logic pro from the app store and how did it work?
Thanks

Hi ...
Best way to get feedback form Logic Pro users is to post your question in that forum here.

When a website asks me to enter the letter combination shown in the image below, no box letter or box appears. It appears in Internet Exployer and did in earlier version of FF. Am using FF 6.0. Help please

When a website asks me to enter the letter or number combination shown in the image below, no box letter or box appears. It appears in Internet Explorer and did in earlier version of FF. Am using FF 6.0. Help please

If images are missing then check that you aren't blocking images from some domains.
*You can inspect and manage all permissions on the about:permissions page, via the location bar.
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
Make sure that you do not block third-party images permissions.default.images
*http://kb.mozillazine.org/Images_or_animations_do_not_load
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I want al earlier version of logic pro to use for my powermac ....how to obtain?

Similar Messages

Maybe you are looking for