I want to monitor user logins on my solaris 10 os

hi,
i want to monitor logins on my solaris 10 os.
i use the following commands, as instructed on a text book am using
- touch /var/adm/loginlog
- chmod 600 /var/adm/loginlog
Change the group membership of the loginlog file to sys as follows
- chgrp sys /var/adm/loginlog
but when i type wrong password records donot show on this file
/var/adm/loginlog

Here are detailed instructions on how to set up auditing: http://blogs.sun.com/observatory/entry/auditing

Similar Messages

Monitoring User Logins in Business One

Hi,
I'm wondering, is there a way to monitor users when they are logged in on B1 server?
Thanks.

Hi,
Welcome you post on the forum.
Only the file B1upf.xml holding that info you are looking for. You may open that file regularly to check the user connection. Or monitor the file update if you can. The file is under license folder of the server tool.
Thanks,
Gordon

To disable user login on a solaris 10 server

Hello Everybody
I want to know how to disable further users login, if suppose there are 10 users already login on a server & I don't want any more user to login on a server without getting those exsisting users to logoff.
Regards

I suppose you could write a wrapper script that uses who to count the number of connections and then:
touch /etc/nologin
to disable further logons at some arbitrary number. Then you could stick the script into cron and let it do it's thing.
alan

Monitor user logins

How can I know how many times a certain user did logged in.
I would like a chart on logins by users.
Don't know if is important but I'm using SSO authentication.
Thanks

Jeff,
No, you wouldn't do it on page 101. Successful logins can be recorded using application-level processes as I described, or even better, using the post-authentication process block of the authentication scheme. If the code runs in either of these places then the login was necessarily successful.
Note that in 3.0, "access logging" is done automatically for all login attempts, not just those that succeed. Reports on the log are provided in both the site and workspace administration applications. You can create your own reports on a view of the log as well. The User's Guide mentions the Login Attempts report under Monitoring Activity Across a Development Instance for installation-wide activity and it mentions the workspace-level report under Monitoring Activity within a Workspace. This should give you a good idea where to find these reports in their respective admin applications.
Scott

Monitoring user logins and amount of time logged in.

I presently have an open directory master with several Mac Pro's authenticating against it. The owner of the Mac Pro would like to do billing to the other departments based on who was logged in and the amount of time they were logged in.
Normally the "last" command would be perfect for this but with the removal of the wtmp file in 10.5 the last command is flaky at best. I will restart its self multiple times per day or not at all for a month so it is hard to write a script to pull the data out of it.
Does anyone know of a way in 10.5 and higher to find out the type of information that the last command displayed, IE who logged in, what time they logged in and what time they logged out.
I need this information for the Mac Pro's but can pull the information from the open directory server if there is a way to get it from their.
Does anyone know where the last command data is being logged since the removal of the wtmp file.

neither of them seem to give me the login and log out times like the "last" command does. Is there not anyway on the open directory server to pull this data?

See my code that i use for user login but my code not give me result

sir i use oracle with vwp in netbeans 6.1
i want creat a user login form
i drop three textfield and one button
in button i use this code for finding the user in database but this code not me result that go to catch (Exception e) all field in database is string
public String button1_action() {
try {
RowKey userRowKey = luserDataProvider.findFirst
(new String[] { "luser.username", "luser.pwd" },
new Object[] { textField1.getText(), textField2.getText() });
if (userRowKey == null) {
textField3.setText("fahim");
error("Invalid user id or password");
return "case1";
} else {
textField3.setText("aamir");
return "cust";
catch (Exception e) {
log("Cannot perform login for userid " + textField3.getText(), e);
error("Cannot perform login for userid " + textField3.getText() + ": " + e);
textField3.setText("NOOOO");
return null;
please give me idea how i find record from database
thank you
aamir

These are user-to-user forums, you are not talking to Apple here - so I've asked the hosts to remove your email address from your post.
The security code is the 3 or 4 digit code on your credit card, it's quite often on the back of the card on the signature strip, though on some cards it's on the front : credit card security code.

User login report in Active Directory for specific date and time

I want to get User login report in Active Directory for specific date and time e.g user logged in at15-01-2015 from 8:00am to 4:00pm
Is any query, script or any tool available?
Waiting for reply please

You can identify the last logon date and time using my script here: https://gallery.technet.microsoft.com/scriptcenter/Get-Active-Directory-User-bbcdd771
If you would like to get back in time and see when the user did a logon / logoff then you need to have auditing enabled. Once done, you can records from Security log in the event viewer: https://social.technet.microsoft.com/Forums/windowsserver/en-US/98cbecb0-d23d-479d-aa65-07e3e214e2c7/manage-active-directory-users-logon-logoff-events
I have started a Wiki about how to track logon / logoff and it can help too: http://social.technet.microsoft.com/wiki/contents/articles/20422.record-logon-logoff-activities-on-domain-servers-and-workstations-using-group-policy.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Monitor user access (Fusion Middleware)

Hi All
Please advise if it is possible to monitor user login and logoff times when accessing any of the various fusion middleware components...
Specifically SOA Suite 11g (Enterprise Manager, OSB, etc).
I would like to audit and report on the time, duration, and tasks completed each time a user accesses any of the components mentioned above.
I have come across a Product called [Oracle Enterprise Manager Grid Control] that might be suitable to my requirements.
Your expert opinion in this regard will be highly appreciated.
Regards

Hi,
You have to enable Audit Trail for this.
http://www.oracle.com/technetwork/middleware/planning/tutorials/index-091248.htmlThanks,
Avneet

Limit user login in multiple RODC

I have 2 RODC and a RWDC.i prepopulate some password on RODC1 And Some on RODC2 cache database. i already read this article http://www.frickelsoft.net/blog/?p=232
I want to limit user login in multiple RODC.(for example user1 can not login to os in different RODC).
So i want to know is there is a way to limit user to login just from its RODC cache database not RWDC active directory?(i want user in RODC1 cant not login to RODC2.How can i do this?)

Hi,
Do you want to restrict users from logging into a client computer that belongs to another site? Or do you want the users to get authenticated only to the RODC's where their credentials cached?
If you configured your sites and services properly the clients will choose the DC belongs to their own site and subnet. DC locator is the service name which is responsible for assigning a logon DC to the client.If the DC's are in different sites you
can configure the sites and services to point the client to correct DC in a site. AD authentication always distributed based on the sites and services you configured.
You can configure ldapsrv records to authenticate against specific DC.
RODCs do not register Domain Name System (DNS) general records (records that are associated with the domain itself and not with a specific site), as read/write domain controllers (RWDCs) do. This is the default behavior of RODCs. Although you can tune an
RODC to register DNS general records, we recommend that you not change the default behavior.
The main impact of RODCs not registering DNS general records is that a client computer cannot find an RODC in its site without reaching an RWDC (that is, a domain controller that registers the general records) if the client computer does not have a record
for the name of the site where the client computer is placed.
Source: Placing Several RODCs in the Same Site
http://technet.microsoft.com/en-us/library/ee522995(WS.10).aspx
Domain Controller Locator : an overview
http://blogs.technet.com/b/arnaud_jumelet/archive/2010/07/05/domain-controller-locator-an-overview.aspx
LdapSrvWeight & LdapSrvPriority
http://blogs.dirteam.com/blogs/carlos/archive/2006/05/10/How-to-lessen-your-PDC_1920_s-load.aspx
http://technet.microsoft.com/en-us/library/cc816793%28WS.10%29.aspx
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

How to monitor user cilck link On portal

i want create monitor user cilck link url report on oracle portal. How to?

Hi Peter,
you should particularly check the Weblogs by Daniel Wroblewski:
<a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1242">Portal SP9: Portal Activity Report</a>
<a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3703">SP15: New and Improved Portal Activity Report</a>
That's a perfect place to start.
Hope that helps,
Robert

I updated my iMac to lion and now when i leave my desktop and it goes into stand by it like a picture is taken of the screen and when i want to log in the mouse point removes pixels so i can get to the user login screen this never happened ith snow leopar

i upgraded my iMac to lion and now when i leave my desktop and it goes into stand by mode, its like a picture is taken of the actice desktop and when i want to log in the mouse point removes pixels so i can get to the user login screen this never happened ith snow leopard. does anyone else experience this and is there a fix?

I have an iMac 8, 1 that I upgraded Leopard to Snow Leopard. It was totally updated with the latest from Apple when I bought and tried installing Lion. The upgrade failed, shot my OS and I couldn't boot. Had the constant spinner on a grey screen.. did a format of the drive, hdd repair and everything came back clean... got back to Snow Leopard and all the updates on it again and then retried the Lion thing... same bs... dead duck. Crashed my system one too many times. I can't see where a few small changes, mostly app related can be classified as an OS upgrade and is not compatible with my iMac. I have the stuff running on my Mac Pro but have yet to notice anything impressive. I've always used F3 and really didn't require Mission Control. Just open you app folder for launch pad... duh? I use the hot corners anyhow. As far as Safari is concerned... as a power user, Apple missed the boat on that for me.. full screen etc.. Wow. I don't like the new Mail either..
As you can see/read, I'm less than impressed with this release from Apple but I own so many of their products that I will have to put up with it for now... somehow the MS logo should apply to this release Steve.

User login report for given period

Hi All,
We have one query relate to user monitoring. We want to get the detail log or report of users login date,time, logout date time and system ip or system name like for the given period.
Our application environment as
SAP application : R/3 4.7
Database : oracle 9.2.0.8
Thanx in advance
Regards,
Vishnu.

Hi Vishnu,
kindly consider to use the forum search before posting. similar questions like yours have been posted several times already. In oyur search results you may find for instance [this thread|Re: Last three user logon date and time;
b.rgds,
Bernhard

User login records on Hyperion Financial Reporting

Hi all,
We understand we can turn on audit to capture the user login (authentication) in Hyperion Planning. Can we have the same option/feature for Financial Reporting to turn on audit so that we know that which reports in one day was generated by end users?

jts wrote:
I think so..take a look at what I found below on page 301 of the financial reporting user guide under the administrative tasks section, report server tasks subsection:
Log File Output Management
Financial Reporting uses the log4j logging mechanism to manage log file output. Logging
settings can be configured and are set in the fr_repserver.properties file for each Financial
Reporting server component.
This code is an example of Financial Reporting Server default settings in the
fr_repserver.properties file. Settings you might modify are shown in bold text.
# log4j.rootLogger=ERROR,dest1
# log4j.appender.dest1=org.apache.log4j.RollingFileAppender
# log4j.appender.dest1.ImmediateFlush=true
# log4j.appender.dest1.File=C:/hyperion/BIPlus/logs/FRReportSrv.log
# log4j.appender.dest1.Append=true
# log4j.appender.dest1.MaxFileSize=512KB
# log4j.appender.dest1.MaxBackupIndex=5
# log4j.appender.dest1.layout=org.apache.log4j.PatternLayout
# log4j.appender.dest1.layout.ConversionPattern=%d{MM-dd
HH:mm:ss} %-6p%c{1}\t%m%n
Note:
See fr_global.properties for details on logging levels (FATAL, ERROR, WARN, INFO,
DEBUG) and formatting options. The Financial Reporting logging settings can be changed
without restarting the servers. The .properties files are monitored for changes to the logging
setting every minute. The frequency is set in fr_global.properties. This can be very handy
if you want to set the logging levelThanks a lot! So the login/logout information will be captured in which log file?

Keep track of user logins and time

Is there any way to track users on our xserve quad xeon...such as login date and times?

Hello, tinafromrandolph, and welcome to the AppleBoards,
What services are you interested in keeping track of? AFP, for instance, logging can be set to monitor anything from login/out times to file actions.
You would need to parse the log data in some way if you were looking to make a regular report or something like that, but that's true of about any log file you want to investigate. It largely depends on what service(s) you want to monitor and how detailed their logging is, but a lot of stuff is or can be logged.
If you are more specific there may be more detailed help people can provide.
=Tod

Why does a Login Error occur: "AFP Client wants to use Keychain Login"?

I have three people in my house with separate logins. We are currently using two desktop G4s which are networked via 1000 Base T. When the users login to one of the Macs, they must enter their passwords twice. Once for the AppleShare login and then a second time for the KeyChain Login.
If I attempt to unify the passwords, which are exactly the same, I will get a login error: "AFP Client wants to use Keychain Login". At this point, a dialogue box will appear looking for a password, but not accepting any kind of text at all. All I can do is reset the Mac, go into my admin login and remove the login.keychain file from the local Library folder to get back into the User account.
In my attempts to fix this, I have removed every preference file with the word "login" in it and re-logged in without success. I have also used the Keychain Access software to administer Keychain First Aid without success. Finally, I have deleted the keychain login in Keychain Access without success. I have done all of these separately and together without success.
This is only happening on one Mac. The Mac that has no files on it. All working files are stored on the other Mac and it does not have the same problem at all.
This is not a huge problem, but it is annoying. I would appreciate it if anybody knows anything about this and could shine some light on the situation.

Sorry about the delay from your last reply. I have been busy with work and studying for a licensing exam.
Anyway I tried the AppleJack Utility you suggested. It looked like it tidied up some things. But as for my particular issue, it did absolutely nothing.
Interestingly enough, you know when you aren't looking for something and that something just happens by accident? When I logged in the other day, I typed in the first login. The second dialogue came up immediately and I hit the cancel button instead of the OK button. When I was passed on to the Finder, the second login dialogue came up again. I typed in the password this time and checked the checkbox. When I relogged in, the problem vanished. I only waited this long to let you know to make sure the problem is gone and it is. I wish I would have thought of selecting the cancel button before. Sometimes solutions are simple like this one.
Thanks for your help.

I want to monitor user logins on my solaris 10 os

Similar Messages

Maybe you are looking for