I want to update forms in the response file and save it. Sometimes it works, but often I need to save the response file in another name. Very inconsequent! How come?

I have a form that I am sending out and compiling in the response file. These forms I also want to be able to update after receiving them (when I have them in the response file).
But when I do the updates I need to re-save the response file with another name? The strange thing is that sometimes I can just update and save exactly the way I want it. But most of the time I get the message "This file may be read-only, or another user may have it open. Please save the document with a different name or in a different folder."
Can someone please help me to figure out how to solve this issue. I know that I am the only one that has the file open. I am encountering the same issue in both Acrobat Pro 9 and Acrobat Pro X. (File was created in Acrobat Pro 9)

Good day!
A simple Paste does not work for you?
It should place the clipboard content as a new Layer which you can then move around.
If there is any chance that the elements need to be scaled, rotated etc. I would prefer to place them as Smart Objects (File > Place …) and do the masking that is specific to the images themselves in those.
Regards,
Pfaffenbichler

Similar Messages

  • TS2621 I had to change my ATT email password on my PC due to hacker...now I cannot get email on my Ipad and Samsung Galaxy S3.  I have deleted my old password and entered the new one, and it still won't work.  Do I need to delete the email accts and re-en

    and please, I'm not computer saavy, so don't be mean...thanks!

    Hi skippy2012trev,
    Welcome to the Apple Support Communities!
    I understand that you updated your Apple Id and password but now you are being prompted for the old information in iCloud. You are on the right track by changing the Apple ID back to the previous email address temporarily so that you can sign out. You should not need to verify the email address. After you edit the Apple ID back to the old email address and then sign out of iCloud on your iPhone, edit the Apple ID back to the address you would currently like to use. There is no need to change the password again, only the email address, unless you prefer to update the password again.
    If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support
    Change your Apple ID temporarily
    If signing out and back in to iMessage or FaceTime didn't help, try these steps:
    Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
    Tap Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
    Scroll down and tap Sign Out, then tap Sign Out to confirm. If you're using iOS 7 or earlier, tap Delete Account, then tap Delete to confirm.
    Tap Keep on My [Device] or Delete from My [Device]. In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
    Enter the password for your previous Apple ID.
    Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
    Return to Settings > iCloud and sign in with your new Apple ID.
    Cheers,
    Joe

  • My iPod will go to the app store and act like it's connected but once I try to download the app and I put in my password it says that I can't connect to the iTunes store

    My iPod will go to the app store and act like it's connected but once I try to download the app and I put in my password it says that I can't connect to the iTunes store

    Try "resetting" your Apple ID account  >   My Apple ID

  • HT4623 I did the latest update to my i pad 2 and now Safari does not work properly . I get messages that the java script needs to be turned on which I did. How do I get this all back after this update?

    I did the latest update to my I pad 2 and lost Safari . I was instructed to switch the Java script on which I did but Safari is still not working properly . how do I get everything back after this software update.

    Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

  • The old version of Sync will continue to work, but then it says "for a limited time"??

    I have read all the info on the new sync, but it is not clear to me when it says:
    "While the old version of Sync will continue to work, the latest version of Firefox doesn't support adding new devices to the old version of Sync. This means that you won't be able to sync with a new device.
    to allow for migration to Firefox Accounts."
    the old version of Sync will continue to work,
    but
    Mozilla will continue to host the old version of Sync for a limited time...?
    This is confusing.
    Does i mean that
    the old version of Sync will continue to work for a limited time only?
    or rather,
    that it will work indefinitely, but only for your devices already paired/synced?

    The new version of Sync will work in a limited capacity for a short time. You can use it as is, but you can't add new devices. You should upgrade to the new sync ASAP (it's more reliable and robust).
    [[How to update to the new Firefox Sync]]

  • I have accidentially added a video to the photostream upload and now it will not work

    I have accidentially added a video to the photostream upload and now it will not work, it would not let me delete the video from the upload file, so I have uninstalled icloud from PC and deleted all the folders. And started again, but still not working

    You supply little pertinent about the MBP and the iPhone.
    First... on the MBP... Click on the Apple icon.. Top left in Finder...
     > About this Mac > Version...what does it say?
    Which iPhone and what is its' iOS Version.

  • I have iPhone4 and Windows 7 Home Premium. My iphone can't backup: message 'couldn't backup because the iphone disconnected'. It started when i wanted to update to iphone3,1_5.0_9A334_restore.ipsw and I received a 3002 error. Exhausted trying everything

    I have iPhone4 and Windows 7 Home Premium. iPhone can't backup: message 'couldn't backup because the iphone disconnected'. It started when i wanted to update to iphone3,1_5.0_9A334_Restore.ipsw and I received a 3002 error. Sync seems to work OK. Have exhausted the online discussions and tried everything. Please help

    Try runing iTunes in admin mode. That fixed the issue for me. You can either right click on the shortcut on your desktop and choose to run as an admin each time you launch it or go to the advanced tab under security on the program itself and click the run as admin every time.

  • Hi. I just wanted to update my 3 apps PS, Brigde and Indesign. After doing that I wasn't ablle to open Brigde??? PS and Indesign works fine. Further more the Application Manager does not seem to register the updates I have made. Everytime I open the compu

    Hi. I just wanted to update my 3 apps PS, Brigde and Indesign. After doing that I wasn't abble to open Brigde??? PS and Indesign works fine. Further more the Application Manager does not seem to register the updates I have made on Indesign and PS. Everytime I open the computer MacIBook 4.1, OS 10.6.7) it looks like I haven't updated software? Please help! Kurt

    Moving this discussion to the Bridge General Discussion forum.
    Kurt Rodahl Hoppe I would recommend reviewing Updates repeatedly applied | CC which discusses how to apply the updates successfully.

  • I want to sync tasks in Outlook with my iPhone. I have tried Toodledo (not good) and Todo. Todo works, but it cuts off most of the text. I only get the beginning of my (long) lists. Any ideas how I can solve this problem?

    I want to sync tasks in Outlook with my iPhone. I have tried Toodledo (not good) and Todo. Todo works, but it cuts off most of the text. I only get the beginning of my (long) lists. Any ideas how I can solve this problem? I starting to regret that I switched to iPhone...

    Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
    So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
    Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
    Memory can be tested with memory diagnostics programs like Memtest+
    Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
    If the motherboard has no response then do the basics first:
    Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory.

  • How long does it typically take to update new apple products?  I'm speaking in terms of software/firmware updates.  My new Apple TV and iPad 3 are glitchy, which is extremely frustrating considering I have the last gen of each sitting there working great.

    How long does it typically take to update new apple products?  I'm speaking in terms of software/firmware updates.  My new Apple TV and iPad 3 are glitchy, which is extremely frustrating considering I have the last gen of each sitting there working flawlessly.

    I appreciate the responses, however my initial post was too vague. I apologize and will explain.  The specific issues are the window closes occasionally when loading something large, that has ceased in the last day or two. My battery life is no where near the second gens, is that the extra hardware at work? I thought that had been accounted for? One of the frustrating, albeit humorous occurrences is when I placed the second and third gen within 1 foot of each other, turned off LTE, and streamed a video.  From every location the second gen out ran the new model on 3G signal, lol.  Not a huge deal since I have wi-fi or LTE pretty much everywhere I am, but disappointing none the less. 
    The new apple tv is great, except for the same thing everyone is posting about. HD iTunes library streaming taking overly extended load times. I don't expect it will take too long  for apple to address that issue. I'm new to apple, last 6 months, but they seem to have excellent support!  It is definetly highly rated.

  • When i want to install windows7 on my snow leopard(10.6.4) with boot camp assistant,said that you must update your mac,i do this and try to install windows7 again but i have this problem again?what can i do?

    when i want to install windows7 on my snow leopard(10.6.4) with boot camp assistant,said that you must update your mac,i do this and try to install windows7 again but i have this problem again?what can i do?

    Graham Giles wrote:
    Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
    No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
    TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
    •  I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
    There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
    On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
    I know that using a cloned drive would work well in this instance.
    I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
    With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

  • Hi, I have a PPC Running OSX 10.5.4 and I want to delete the User "Guest"and "Shared"Folders on my HD, they won't let me change the permissions and I keep getting errors that say the permissions should be 0 and are 501 and having files i can't delete that

    Hi, I have a PPC Running OSX 10.5.4 and I want to delete the User "Guest"and "Shared"Folders on my HD, they won't let me change the permissions and I keep getting errors that say the permissions should be 0 and are 501 and having files i can't delete that go on and on ad infinitum... I think it's a virus or a corruption? Can anyone tell me or help me and let me know what I'm dealing with here or wether I'm mistaken and should leave it alone?
    I'd appreciate it.
    Thanks,
    Matt

    mattmakesvidiots wrote:
    Hi, I have a PPC Running OSX 10.5.4 and I want to delete the User "Guest"and "Shared"Folders on my HD
    Why do you want to delete those?  What have you done so far to do that?
    I doubt that Mac has a virus.  On the other hand, your attempts to deleted those folders may have caused corruption.
    Two other comments:
    1) Is there a reason that Mac hasn't been updated to OS X 10.5.8?
    2) You've been misled by the poor field labeling on this Web site into trying to type your entire post into the "subject" field.  In the future, just put a short summary of your post into that field.

  • Recently changed my primary e-mailadress. When opening i-Tunes store in te left upper corner my changed adress is visible.However whwn I want to update apps on my i-Phone and / or i-Pad my old emaildress appears and I cannot log in on i-Tunes store.

    Why appears my old emailadress when I want to update apps on my i-Phone and / or i-Pad?

    Try tapping on your id at the bottom of the Featured tab in the App Store apps on your phone and iPad and log out of your account on them, and then log back in with the updated version of your account so as to 'refresh' the account on them

  • I have just bought a new Mac book pro and I want to transfer my iTunes (including music, photos and apps on my iPod touch) from my old windows computer to the Mac... any tips?

    I have just bought a new Mac book pro and I want to transfer my iTunes (including music, photos and apps on my iPod touch) from my old windows computer to the Mac... any tips? Is this possible?
    (iPod touch 4, Mac Book Pro (osx lion))

    In Addition to the post by ds store...
    You may find these Links helpful...
    Move iTunes Library from PC to MAC
    http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html
    Download Past Purchases
    http://support.apple.com/kb/HT2519
    Also see this Excellent Link by Pondini on Transferring Old to New...
    http://web.me.com/pondini/AppleTips/Setup.html

  • I need to install Mozella Firefox 2.0 to fill out a form that is not supported with the newer version that is installed on my PC. Do I need to delete the new version before using the older version?

    I need to install Mozella Firefox 2.0 to fill out a form that is not supported to input info from the newer version that is installed on my PC. Do I need to delete the newer version before using the older version? If so, how do I delete the new version and install the older version?

    If you just need it for one site you can use the portable version of Firefox 2 instead. You can install the portable version on a USB key, or if one is not available choose the custom install and install it somewhere on your hard drive. The portable version will not interfere with your current version of Firefox. You can get the portable version from http://portableapps.com/apps/internet/firefox_portable - the link for Firefox 2.0.0.20 is near the bottom of that page.

Maybe you are looking for