I will be working on a project to migrate from Sybase ASE (15.7) to SQL Server 2014 using Oracle golden gate........I am trying to find documentation which can guide me to use a separate box installation of OGG and how to configure it for Sybase and SQL s
Hi,
I need guide to install OGG on a separate box which will help me to migrate Sybase to SQL server.
Viral Dave
hi - just an fyi
we have SQL Server 2012 and from my reads and understanding OGG supports SQL Server up to 2008. not to say it wouldn't work on higher versions if installed. in the link above check out the SQL Server installation chapter. before purchasing the license I would contact Oracle.
maybe someone here has installed it on a higher version and got it to work. we are currently working on setting up OGG to work on Oracle to Oracle servers.
Similar Messages
-
I have erased my drive and when I try to download Mavericks from OS X Uilities, it says "this apple ID has not purchased Lion", will it work it I buy Lion code from Apple ? Thanks
By OS X Utilities, do you mean Recovery? http://support.apple.com/kb/ht4718
Can you explain exactly what you did to erase the drive?
And, which Recovery were you in, regular or Internet? (internet recovery starts up showing a spinning globe). -
SQL Server 2014 installation using command line fails to remove the extraction folder when complete
We need to install SQL Server 2014 Express in /QS mode (shows
progress through the UI, but does not accept any input or show any error messages) as
my setup-Prerequisite. I passed my installation parameters to
SQLEXPRWT_x64_ENU.exe, when I ran my application it pop-ups
user to select the folder to extract files. After I choose the folder, SQL
files got extracted and the installation proceeded and it got succeed.
But it fails to remove the extraction folder when installation is complete.There is an issue that /qs parameter is not recognized and cannot be used the same
way as in SQL 2012. That issue will be addressed in SQL Server 2014 Service Pack 1.
https://connect.microsoft.com/SQLServer/feedback/details/878374/sql-server-2014-express-qs-parameter-requires-user-input -
I am heading out to the US from NZ and I want to buy an Iphone, Will it work in NZ if I buy from Apple and do not connect to any network until back in NZ? Thanks
When you get to the States, if you will be in an area with an Apple store for a couple days, call and ask about reserving an unlocked iPhone, it takes a couple days to get it in the store from what I understand.
The current MBP 15" models are 2.2 and 2.4 GHz i7 machines. There is a 17" with 2.5 GHz i7.
The difference, in addition to the slightly faster cpu, is:
2.2 GHz - Radeon HD 6750 M with 512 MB VRAM
2.4 GHz - Radeon HD 6770 M with 1 GB VRAM
Both have the same hard drive, 750 GB 5400 rpm, both have the same primary graphics - Intel 3000.
So the difference is in the discrete grapics processor, important for heavy video work, heavy gaming...but will drain the battery a lot faster.
You can get all the details on any Mac computer by going to http://www.everymac.com and click on the model and then scroll down to the exact machine of interest. -
Fatal error while executing the DQS installer on SQL Server 2014
Hi all.
I am receiving the following error when attempting to install DQS on the following platform:
Windows Server 2012
Microsoft SQL Server 2014 - 12.0.2000.8 (X64) Feb 20 2014 20:04:26 Copyright (c) Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: )
(no entries in event viewer)
Error is:
[4/15/2015 8:45:04 AM] Fatal error while executing the DQS installer.
Microsoft.Ssdqs.Proxy.ImportExport.ImportExportException: Error occurred in a server proxy call during the import/export process. ---> Microsoft.Ssdqs.Proxy.ImportExport.ImportProcessFailedException: System.NullReferenceException: Object reference not set
to an instance of an object.
at System.Security.Cryptography.CryptoStream..ctor(Stream stream, ICryptoTransform transform, CryptoStreamMode mode)
at Microsoft.Ssdqs.ImportExportManagement.ImportExport.ImportExportReader..ctor(Stream stream)
at Microsoft.Ssdqs.ImportExportManagement.ImportExport.ImportExportManager.Import(Stream input)
at Microsoft.Ssdqs.ImportExportManagement.Calibrator.ImportKnowledgebaseCalibrator.Calibrate(IMasterContext masterContext, CalibrationMode calibrationMode, ConfigurationDomParameter calibratorConfiguration)
at Microsoft.Ssdqs.Core.Service.Calibration.Impl.ExecuteCalibratorFlow.Process(IMasterContext context)
--- End of inner exception stack trace ---
at Microsoft.Ssdqs.Proxy.ImportExport.ImportAsProcessManager.WaitUntillProcessCompletes(Int64 processId, Int64 knowledgebaseId, ImportExportCancellationToken cancelToken)
at Microsoft.Ssdqs.Proxy.ImportExport.ImportAsProcessManager.KnowledgebaseImport(String kbName, String kbDescription, String fileName, ImportExportCancellationToken cancelToken)
at Microsoft.Ssdqs.DqsInstaller.Logic.Actions.LoadOutOfTheBoxDataAction.Execute()
at Microsoft.Ssdqs.DqsInstaller.Logic.ActionExecuter.ExecuteAllActions()
at Microsoft.Ssdqs.DqsInstaller.Logic.Installer.Main(String[] args)
Thanks for any advice you can give.
Full log below:
Microsoft (R) DQS Installer Command Line Tool
Copyright (c) 2014 Microsoft. All rights reserved.
[4/15/2015 7:58:20 AM] DQS Installer started. Installation log will be written to C:\Program Files\Microsoft SQL Server\MSSQL12.DW01\MSSQL\Log\DQS_install.log
[4/15/2015 7:58:20 AM] Setting the collation to default value: SQL_Latin1_General_CP1_CI_AS
[4/15/2015 7:58:20 AM] Using instance: DW01, catalog: DQS.
[4/15/2015 7:58:20 AM] Executing action: Validate collation argument.
[4/15/2015 7:58:20 AM] Action 'Validate collation argument' finished successfully.
[4/15/2015 7:58:20 AM] Executing action: Check whether system reboot is pending.
[4/15/2015 7:58:20 AM] Action 'Check whether system reboot is pending' finished successfully.
[4/15/2015 7:58:20 AM] Executing action: Create data quality event source.
[4/15/2015 7:58:20 AM] Action 'Create data quality event source' finished successfully.
[4/15/2015 7:58:20 AM] Executing action: Request Database Master Key password from user..
Microsoft (R) DQS Installer Command Line Tool
Copyright (c) 2014 Microsoft. All rights reserved.
[4/15/2015 8:39:59 AM] DQS Installer started. Installation log will be written to C:\Program Files\Microsoft SQL Server\MSSQL12.DW01\MSSQL\Log\DQS_install.log
[4/15/2015 8:39:59 AM] Parsing DqsInstaller command line arguments.
[4/15/2015 8:39:59 AM] Setting the catalog to default value: DQS
[4/15/2015 8:39:59 AM] Setting the collation to default value: SQL_Latin1_General_CP1_CI_AS
[4/15/2015 8:39:59 AM] Using instance: DEV01, catalog: DQS.
[4/15/2015 8:39:59 AM] Executing action: Validate collation argument.
[4/15/2015 8:39:59 AM] Action 'Validate collation argument' finished successfully.
[4/15/2015 8:39:59 AM] Executing action: Check whether system reboot is pending.
[4/15/2015 8:39:59 AM] Action 'Check whether system reboot is pending' finished successfully.
[4/15/2015 8:39:59 AM] Executing action: Create data quality event source.
[4/15/2015 8:39:59 AM] Action 'Create data quality event source' finished successfully.
[4/15/2015 8:39:59 AM] Executing action: Request Database Master Key password from user..
[4/15/2015 8:41:05 AM] Action 'Request Database Master Key password from user.' finished successfully.
[4/15/2015 8:41:05 AM] Executing action: Approve removal of data quality services previous schema.
[4/15/2015 8:41:05 AM] Action 'Approve removal of data quality services previous schema' finished successfully.
[4/15/2015 8:41:05 AM] Executing action: Load Installation Scripts.
[4/15/2015 8:41:05 AM] Extracting script to: C:\Users\SqlServiceAcct\AppData\Local\Temp\3mo2vwbu.xch
[4/15/2015 8:41:06 AM] Extracting script: db\create_core_db_objects.sql
[4/15/2015 8:41:06 AM] Extracting script: db\create_logic_db_objects.sql
[4/15/2015 8:41:06 AM] Extracting script: db\create_transient_db_objects.sql
[4/15/2015 8:41:06 AM] Extracting script: db\static_data.sql
[4/15/2015 8:41:06 AM] Extracting script: db\drop_dq_databases.sql
[4/15/2015 8:41:06 AM] Extracting script: db\db_version.sql
[4/15/2015 8:41:06 AM] Extracting script: helper\DeleteSchemaDs.sql
[4/15/2015 8:41:06 AM] Extracting script: sql\drop_all_assemblies.sql
[4/15/2015 8:41:06 AM] Extracting script: sql\create_databases.sql
[4/15/2015 8:41:06 AM] Extracting script: sql\drop_databases.sql
[4/15/2015 8:41:06 AM] Extracting script: sql\drop_all_tables.sql
[4/15/2015 8:41:06 AM] Extracting script: sql\drop_database_properties.sql
[4/15/2015 8:41:06 AM] Extracting script: sql\master_create.sql
[4/15/2015 8:41:06 AM] Extracting script: sql\master_recreate.sql
[4/15/2015 8:41:06 AM] Extracting script: sql\register_assemblies.sql
[4/15/2015 8:41:06 AM] Extracting script: sql\register_assemblies_tsql.sql
[4/15/2015 8:41:06 AM] Extracting script: sql\register_dq_assemblies.sql
[4/15/2015 8:41:06 AM] Extracting script: sql\create_service_broker_objects.sql
[4/15/2015 8:41:06 AM] Extracting script: sql\drop_service_broker_objects.sql
[4/15/2015 8:41:06 AM] Extracting script: db\set_dq_databases_single_user.sql
[4/15/2015 8:41:06 AM] Extracting script: db\set_dq_databases_multi_user.sql
[4/15/2015 8:41:06 AM] Extracting script: db\upgrade_all_versions.sql
[4/15/2015 8:41:06 AM] Extracting script: recreate_schema.bat
[4/15/2015 8:41:06 AM] Extracting script: upgrade_schema.bat
[4/15/2015 8:41:06 AM] Extracting script: upgrade_version_tables.bat
[4/15/2015 8:41:06 AM] Extracting script: drop_databases.cmd
[4/15/2015 8:41:06 AM] Extracting script: register_dlls.cmd
[4/15/2015 8:41:06 AM] Extracting script: unregister_dlls.cmd
[4/15/2015 8:41:06 AM] Extracting script: assembly_paths_retail.txt
[4/15/2015 8:41:06 AM] Extracting script: DQS_Data.dqs
[4/15/2015 8:41:06 AM] Extracting script: DefaultKbs.xml
[4/15/2015 8:41:06 AM] Total scripts extracted: 31
[4/15/2015 8:41:06 AM] Action 'Load Installation Scripts' finished successfully.
[4/15/2015 8:41:06 AM] Executing action: Create data quality schema.
[4/15/2015 8:41:06 AM] Script: 'recreate_schema.bat CMTSQLSVR04\DEV01 DQS SQL_Latin1_General_CP1_CI_AS'
[4/15/2015 8:41:06 AM] . Trying to connect using Windows Authentication and db name...
[4/15/2015 8:41:06 AM] Run create_databases.sql to create Data Quality Service databases if they do not exist.
[4/15/2015 8:41:07 AM]
[4/15/2015 8:41:07 AM] --> Running File: create_databases.sql
[4/15/2015 8:41:07 AM] ---[ Creating databases ]---
[4/15/2015 8:41:07 AM] Changed database context to 'master'.
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --> Running File: drop_dq_database.sql
[4/15/2015 8:41:10 AM] ---[ Dropping Data Quality Databases ]---
[4/15/2015 8:41:10 AM] Creating DQS databases (DQS_MAIN, DQS_PROJECTS, DQS_STAGING_DATA)...
[4/15/2015 8:41:10 AM] Configuring DQS databases
[4/15/2015 8:41:10 AM] Configuration option 'clr enabled' changed from 0 to 1. Run the RECONFIGURE statement to install.
[4/15/2015 8:41:10 AM] Configuration option 'show advanced options' changed from 0 to 1. Run the RECONFIGURE statement to install.
[4/15/2015 8:41:10 AM] Configuration option 'xp_cmdshell' changed from 0 to 1. Run the RECONFIGURE statement to install.
[4/15/2015 8:41:10 AM] Creating Master Key for database DQS_MAIN...
[4/15/2015 8:41:10 AM] Creating Module Signing Certificate for database DQS_MAIN...
[4/15/2015 8:41:10 AM] Exporting Certificate from DQS_MAIN
[4/15/2015 8:41:10 AM] Importing Certificate into DQS_PROJECTS
[4/15/2015 8:41:10 AM] Configuration option 'xp_cmdshell' changed from 1 to 0. Run the RECONFIGURE statement to install.
[4/15/2015 8:41:10 AM] Creating DQS roles
[4/15/2015 8:41:10 AM] Run master_recreate.sql to recreate Data Quality Service Main and Projects Databases and drop all tables including known temporary tables.
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --> Running master_recreate.sql
[4/15/2015 8:41:10 AM] ---[ Recreate DQS Main and Projects Databases ]---
[4/15/2015 8:41:10 AM] Changed database context to 'DQS_STAGING_DATA'.
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --> Running File: drop_database_properties.sql
[4/15/2015 8:41:10 AM] ---[ Dropping Database Properties]---
[4/15/2015 8:41:10 AM] Changed database context to 'DQS_PROJECTS'.
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --> Running File: drop_all_tables.sql
[4/15/2015 8:41:10 AM] ---[ Dropping all SSDQS Database objects and KB schemas ]---
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --[ Drop all Symmetric Keys ]
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --[ Drop all Certificates ]
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --[ Drop all FK constraints ]
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --[ Drop all views ]
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --[ Drop all tables and synonyms ]
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --[ Drop all database triggers ]
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --[ Drop all stored procedures in Knowledge Base schemas ]
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --[ Drop all types in Knowledge Base schemas ]
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --[ Drop all Knowledge Base schemas ]
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --> Running File: drop_database_properties.sql
[4/15/2015 8:41:10 AM] ---[ Dropping Database Properties]---
[4/15/2015 8:41:10 AM] Changed database context to 'DQS_MAIN'.
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --> Running File: drop_all_tables.sql
[4/15/2015 8:41:10 AM] ---[ Dropping all SSDQS Database objects and KB schemas ]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] --[ Drop all Symmetric Keys ]
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] --[ Drop all Certificates ]
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] --[ Drop all FK constraints ]
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] --[ Drop all views ]
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] --[ Drop all tables and synonyms ]
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] --[ Drop all database triggers ]
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] --[ Drop all stored procedures in Knowledge Base schemas ]
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] --[ Drop all types in Knowledge Base schemas ]
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] --[ Drop all Knowledge Base schemas ]
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] --> Running File: drop_database_properties.sql
[4/15/2015 8:41:11 AM] ---[ Dropping Database Properties]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] --> Running master_create.sql
[4/15/2015 8:41:11 AM] ---[ Creating and Populating Main DQS DB ]---
[4/15/2015 8:41:11 AM] Changed database context to 'DQS_STAGING_DATA'.
[4/15/2015 8:41:11 AM] Changed database context to 'DQS_PROJECTS'.
[4/15/2015 8:41:11 AM] Changed database context to 'DQS_MAIN'.
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] --> Running File: create_core_db_objects.sql
[4/15/2015 8:41:11 AM] ---[ Creating Certificates ]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] ---[ Creating Symmetric Keys ]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] ---[ Creating Tables ]---
[4/15/2015 8:41:11 AM] Creating Table: A_TEST
[4/15/2015 8:41:11 AM] Creating Table: A_TEST2
[4/15/2015 8:41:11 AM] Creating Table: A_FLOW
[4/15/2015 8:41:11 AM] Creating Table: A_FLOW_ANSWER
[4/15/2015 8:41:11 AM] Creating Table: A_EXECUTION_UNIT
[4/15/2015 8:41:11 AM] Creating Table: A_CODE_GROUP
[4/15/2015 8:41:11 AM] Creating Table: A_CODE_MEMBER
[4/15/2015 8:41:11 AM] Creating Table: A_CONFIGURATION
[4/15/2015 8:41:11 AM] Creating Table: A_PROCESS
[4/15/2015 8:41:11 AM] Creating Table: A_SERVICE_BROKER_TASK
[4/15/2015 8:41:11 AM] Creating Table: A_KNOWLEDGEBASE
[4/15/2015 8:41:11 AM] Creating Table: A_KNOWLEDGEBASE_AUDIT
[4/15/2015 8:41:11 AM] Creating Table: A_KNOWLEDGEBASE_ACTIVITY
[4/15/2015 8:41:11 AM] Creating Table: A_PROFILING_ACTIVITY_ARCHIVE
[4/15/2015 8:41:11 AM] Creating Table: A_CLIENT_SESSION
[4/15/2015 8:41:11 AM] Creating Table: A_REFERENCE_DATA_PROVIDER
[4/15/2015 8:41:11 AM] Creating Table: A_REFERENCE_DATA_PROVIDER_SCHEMA
[4/15/2015 8:41:11 AM] Creating Table: A_REFERENCE_DATA_CACHE
[4/15/2015 8:41:11 AM] Creating Table: A_REFERENCE_DATA_CACHE_SUGGESTION
[4/15/2015 8:41:11 AM] Creating Table: A_REFERENCE_DATA_CACHE_SUGGESTION_PARSED
[4/15/2015 8:41:11 AM] Creating Table: A_REFERENCE_DATA_AUDIT
[4/15/2015 8:41:11 AM] Creating Table: A_IMPORTED_PROJECT
[4/15/2015 8:41:11 AM] Creating Table: A_SPELLER_DICTIONARY_VALUE
[4/15/2015 8:41:11 AM] Creating Table: A_SPECIAL_CHARACTER_RULE
[4/15/2015 8:41:11 AM] Creating Table: A_PERSISTENT_CACHE
[4/15/2015 8:41:11 AM] Creating Table: A_TEMPLATE_OBJECTS
[4/15/2015 8:41:11 AM] Creating Table: A_TEMPLATE_FOREIGN_KEYS
[4/15/2015 8:41:11 AM] Creating Table: A_TEMPLATE_COLUMNS
[4/15/2015 8:41:11 AM] ---[ Creating Views ]---
[4/15/2015 8:41:11 AM] Creating View: V_A_FLOW
[4/15/2015 8:41:11 AM] Creating View: V_A_KNOWLEDGEBASE
[4/15/2015 8:41:11 AM] Creating View: V_A_KNOWLEDGEBASE_AUDIT
[4/15/2015 8:41:11 AM] Creating View: V_A_REFERENCE_DATA_PROVIDER
[4/15/2015 8:41:11 AM] Changed database context to 'DQS_PROJECTS'.
[4/15/2015 8:41:11 AM] Changed database context to 'DQS_MAIN'.
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] --> Running File: static_data.sql
[4/15/2015 8:41:11 AM] ---[ Inserting Data ]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Insert Cleansing configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Insert Logging settings section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Insert Logging settings section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Insert Association configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Insert DataValueService configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Insert Association rules configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Insert IndexService configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Insert Knowledgebase configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Insert Notification configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Insert Interactive Cleansing configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Reference Data configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Insert client paging configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Insert client process sampling configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Matching configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Profiling configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Process configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[FileStorageManager configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[ImportExportManager configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Reference Data Add provider]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Reference Data Add provider schema]---
[4/15/2015 8:41:11 AM] ---[Add Special characters for term normalization]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] --> Running File: db_version.sql
[4/15/2015 8:41:11 AM] ---[ Running version related work ]---
[4/15/2015 8:41:11 AM] Changed database context to 'DQS_MAIN'.
[4/15/2015 8:41:11 AM] Creating Table: A_DB_VERSION_INFO
[4/15/2015 8:41:11 AM] Creating Table: A_DB_VERSION
[4/15/2015 8:41:11 AM] Creating Table: A_DB_VERSION_UPGRADE_SCRIPTS
[4/15/2015 8:41:11 AM] Creating Table: A_DB_VERSION_UPGADE_SCRIPT_PATH
[4/15/2015 8:41:11 AM] Creating view: V_DB_VERSION
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (0 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (0 rows affected)
[4/15/2015 8:41:11 AM] ---[Add DB Version information]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (0 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (0 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (0 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Add DB Version upgrade scripts]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Add DB Version upgrade scripts path]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Add DB Version upgrade scripts path]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] Changed database context to 'DQS_PROJECTS'.
[4/15/2015 8:41:11 AM] Creating Table: A_DB_VERSION in PROJECTS database
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] Action 'Create data quality schema' finished successfully.
[4/15/2015 8:41:11 AM] Executing action: Register data quality assemblies and stored procedures.
[4/15/2015 8:41:11 AM] Script: 'register_dlls.cmd CMTSQLSVR04\DEV01 DQS'
[4/15/2015 8:41:12 AM] . Trying to connect using Windows Authentication and db name...
[4/15/2015 8:41:12 AM]
[4/15/2015 8:41:12 AM] --> Running File: drop_all_assemblies.sql
[4/15/2015 8:41:12 AM] ---[ Dropping all SSDQS Executable Objects ]---
[4/15/2015 8:41:12 AM]
[4/15/2015 8:41:12 AM] --> Drop all SSDQS Types
[4/15/2015 8:41:12 AM]
[4/15/2015 8:41:12 AM] --> Drop all SSDQS Assemblies
[4/15/2015 8:41:12 AM]
[4/15/2015 8:41:12 AM] --> Drop all SSDQS Schemas
[4/15/2015 8:41:12 AM]
[4/15/2015 8:41:12 AM] --> Drop all CLR Assemblies
[4/15/2015 8:41:12 AM]
[4/15/2015 8:41:12 AM] --> Drop DQ startup stored procedure DQInitDQS_MAIN
[4/15/2015 8:41:12 AM] Changed database context to 'master'.
[4/15/2015 8:41:12 AM]
[4/15/2015 8:41:12 AM] --> Running File: drop_service_broker_objects.sql
[4/15/2015 8:41:12 AM] ---[ Dropping all SSDQS Service Broker Objects ]---
[4/15/2015 8:41:12 AM] Changed database context to 'DQS_MAIN'.
[4/15/2015 8:41:12 AM] Dropping Service Broker Services.
[4/15/2015 8:41:12 AM] Dropping Service Broker Queues.
[4/15/2015 8:41:12 AM] Dropping Service Broker Contracts.
[4/15/2015 8:41:12 AM] Dropping Service Broker Messages.
[4/15/2015 8:41:12 AM] Completed - Service Broker objects dropped.
[4/15/2015 8:41:12 AM]
[4/15/2015 8:41:12 AM] --> Running register_assemblies.sql
[4/15/2015 8:41:12 AM] ---[ Registering Assemblies ]---
[4/15/2015 8:41:12 AM] Changed database context to 'DQS_MAIN'.
[4/15/2015 8:41:12 AM]
[4/15/2015 8:41:12 AM] --> Registering Assemblies
[4/15/2015 8:41:12 AM] The following Warnings are benign to DQSInstaller and may be ignored.
[4/15/2015 8:41:12 AM]
[4/15/2015 8:41:12 AM] * Register .NET dependency assemblies
[4/15/2015 8:41:25 AM] Warning: The Microsoft .NET Framework assembly 'system.management, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:25 AM] Warning: The Microsoft .NET Framework assembly 'system.configuration.install, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted
environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:25 AM] Warning: The Microsoft .NET Framework assembly 'system.runtime.serialization, version=4.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted
environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:25 AM] Warning: The Microsoft .NET Framework assembly 'smdiagnostics, version=4.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:25 AM] Warning: The Microsoft .NET Framework assembly 'system.windows.forms, version=4.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:25 AM] Warning: The Microsoft .NET Framework assembly 'system.drawing, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:25 AM] Warning: The Microsoft .NET Framework assembly 'accessibility, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:25 AM] Warning: The Microsoft .NET Framework assembly 'system.runtime.serialization.formatters.soap, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the
SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:25 AM] Warning: The Microsoft .NET Framework assembly 'microsoft.jscript, version=10.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:26 AM] Warning: The Microsoft .NET Framework assembly 'system.management.instrumentation, version=4.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server
hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:27 AM] Warning: The Microsoft .NET Framework assembly 'system.messaging, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:27 AM] Warning: The Microsoft .NET Framework assembly 'system.directoryservices, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted
environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.enterpriseservices, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=amd64.' you are registering is not fully tested in the SQL Server hosted
environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.runtime.remoting, version=4.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted
environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.web, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=amd64.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'microsoft.build.framework, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted
environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.xaml, version=4.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.runtime.caching, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'microsoft.build.utilities.v4.0, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server
hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.directoryservices.protocols, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server
hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.design, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.drawing.design, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.web.regularexpressions, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted
environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'microsoft.build.tasks.v4.0, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted
environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.serviceprocess, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:44 AM] * Register Microsoft.Practices assemblies
[4/15/2015 8:41:47 AM] Warning: The Microsoft .NET Framework assembly 'microsoft.csharp, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:47 AM] Warning: The Microsoft .NET Framework assembly 'system.dynamic, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:47 AM]
[4/15/2015 8:41:47 AM] The preceding Warnings are benign to DQSInstaller and may be ignored.
[4/15/2015 8:41:48 AM]
[4/15/2015 8:41:48 AM] --> Running register_dq_assemblies.sql
[4/15/2015 8:41:48 AM] ---[ Registering Data Quality assemblies ]---
[4/15/2015 8:41:49 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.infra, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
[4/15/2015 8:41:50 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.core, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
[4/15/2015 8:41:51 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.dataservice, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
[4/15/2015 8:41:51 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.referencedata, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
[4/15/2015 8:41:52 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.index, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
[4/15/2015 8:41:52 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.associationrules, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
[4/15/2015 8:41:53 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.datavalueservice, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
[4/15/2015 8:41:54 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.domainrules, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
[4/15/2015 8:41:54 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.cleansing, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
[4/15/2015 8:41:55 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.association, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
[4/15/2015 8:41:55 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.flow, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
[4/15/2015 8:41:56 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.matching, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
[4/15/2015 8:41:57 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
[4/15/2015 8:41:57 AM] Resource file was not copied
[4/15/2015 8:41:57 AM]
[4/15/2015 8:41:57 AM] --> Running register_assemblies_tsql.sql
[4/15/2015 8:41:57 AM] ---[ Registering Assemblies for TSQL]---
[4/15/2015 8:41:57 AM] Changed database context to 'master'.
[4/15/2015 8:41:57 AM] Changed database context to 'DQS_MAIN'.
[4/15/2015 8:41:57 AM]
[4/15/2015 8:41:57 AM] * Clear the Code Member Table A_CODE_MEMBER.
[4/15/2015 8:41:57 AM]
[4/15/2015 8:41:57 AM] (0 rows affected)
[4/15/2015 8:41:57 AM]
[4/15/2015 8:41:57 AM] * Clear the Code Group Table A_CODE_GROUP.
[4/15/2015 8:41:57 AM]
[4/15/2015 8:41:57 AM] (0 rows affected)
[4/15/2015 8:41:57 AM]
[4/15/2015 8:41:57 AM] * Register assemblies T-SQL executable objects
[4/15/2015 8:41:57 AM] - Creating assemblies T-SQL registeration stored procedure.
[4/15/2015 8:41:57 AM]
[4/15/2015 8:41:57 AM] * Creating the internal_core schema
[4/15/2015 8:41:57 AM] - Registering Microsoft.Ssdqs.Infra T-SQL executable objects.
[4/15/2015 8:42:05 AM] - Registering Microsoft.Ssdqs.Core T-SQL executable objects.
[4/15/2015 8:42:11 AM] - Registering Microsoft.Ssdqs.DataService T-SQL executable objects.
[4/15/2015 8:42:16 AM] - Registering Microsoft.Ssdqs.ReferenceData T-SQL executable objects.
[4/15/2015 8:42:21 AM] - Registering Microsoft.Ssdqs.Index T-SQL executable objects.
[4/15/2015 8:42:26 AM] - Registering Microsoft.Ssdqs.Cleansing T-SQL executable objects.
[4/15/2015 8:42:32 AM] - Registering Microsoft.Ssdqs.Association T-SQL executable objects.
[4/15/2015 8:42:37 AM] - Registering Microsoft.Ssdqs.Flow T-SQL executable objects.
[4/15/2015 8:42:42 AM] - Registering Microsoft.Ssdqs T-SQL executable objects.
[4/15/2015 8:42:51 AM] - Registering Microsoft.Ssdqs.DataValueService T-SQL executable objects.
[4/15/2015 8:42:56 AM] - Registering Microsoft.Ssdqs.DomainRules T-SQL executable objects.
[4/15/2015 8:43:01 AM] - Registering Microsoft.Ssdqs.AssociationRules T-SQL executable objects.
[4/15/2015 8:43:06 AM] - Registering Microsoft.Ssdqs.Matching T-SQL executable objects.
[4/15/2015 8:43:12 AM] - Creating refresh assemblies stored procedure.
[4/15/2015 8:43:12 AM] Changed database context to 'master'.
[4/15/2015 8:43:12 AM] - Creating refresh assemblies helper linked server.
[4/15/2015 8:43:12 AM] - Creating and registering [dbo].[DQInitDQS_MAIN] (calls internal_core.InitServer) as startup stored procedure.
[4/15/2015 8:43:12 AM]
[4/15/2015 8:43:12 AM] --> Running File: create_service_broker_objects.sql
[4/15/2015 8:43:12 AM] ---[ Registering Service Broker Objects ]---
[4/15/2015 8:43:12 AM] Changed database context to 'DQS_MAIN'.
[4/15/2015 8:43:12 AM] - Creating SB dispatcher stored procedure, messages and contract
[4/15/2015 8:43:13 AM] - Creating parallel execution SB queues and services
[4/15/2015 8:43:13 AM] - Creating calibration SB queues and services
[4/15/2015 8:43:13 AM] - Creating parallel calibration SB queues and services
[4/15/2015 8:43:13 AM]
[4/15/2015 8:43:13 AM]
[4/15/2015 8:43:13 AM] Successfully registered all assemblies.
[4/15/2015 8:43:13 AM]
[4/15/2015 8:43:13 AM]
[4/15/2015 8:43:13 AM] Action 'Register data quality assemblies and stored procedures' finished successfully.
[4/15/2015 8:43:13 AM] Executing action: Set product version property.
[4/15/2015 8:43:13 AM] Action 'Set product version property' finished successfully.
[4/15/2015 8:43:13 AM] Executing action: Create MDS user (if MDS login exists).
[4/15/2015 8:43:13 AM] Action 'Create MDS user (if MDS login exists)' finished successfully.
[4/15/2015 8:43:13 AM] Executing action: Load out of the box data.
[4/15/2015 8:43:22 AM] Started loading knowledgebase 'DQS Data'
[4/15/2015 8:45:04 AM] Starting installation rollback...
[4/15/2015 8:45:04 AM] Installation rollback completed successfully.
[4/15/2015 8:45:04 AM] Fatal error while executing the DQS installer.
Microsoft.Ssdqs.Proxy.ImportExport.ImportExportException: Error occurred in a server proxy call during the import/export process. ---> Microsoft.Ssdqs.Proxy.ImportExport.ImportProcessFailedException: System.NullReferenceException: Object reference not set
to an instance of an object.
at System.Security.Cryptography.CryptoStream..ctor(Stream stream, ICryptoTransform transform, CryptoStreamMode mode)
at Microsoft.Ssdqs.ImportExportManagement.ImportExport.ImportExportReader..ctor(Stream stream)
at Microsoft.Ssdqs.ImportExportManagement.ImportExport.ImportExportManager.Import(Stream input)
at Microsoft.Ssdqs.ImportExportManagement.Calibrator.ImportKnowledgebaseCalibrator.Calibrate(IMasterContext masterContext, CalibrationMode calibrationMode, ConfigurationDomParameter calibratorConfiguration)
at Microsoft.Ssdqs.Core.Service.Calibration.Impl.ExecuteCalibratorFlow.Process(IMasterContext context)
--- End of inner exception stack trace ---
at Microsoft.Ssdqs.Proxy.ImportExport.ImportAsProcessManager.WaitUntillProcessCompletes(Int64 processId, Int64 knowledgebaseId, ImportExportCancellationToken cancelToken)
at Microsoft.Ssdqs.Proxy.ImportExport.ImportAsProcessManager.KnowledgebaseImport(String kbName, String kbDescription, String fileName, ImportExportCancellationToken cancelToken)
at Microsoft.Ssdqs.DqsInstaller.Logic.Actions.LoadOutOfTheBoxDataAction.Execute()
at Microsoft.Ssdqs.DqsInstaller.Logic.ActionExecuter.ExecuteAllActions()
at Microsoft.Ssdqs.DqsInstaller.Logic.Installer.Main(String[] args)
Microsoft (R) DQS Installer Command Line Tool
Copyright (c) 2014 Microsoft. All rights reserved.Thank you for the quick response.
Unfortunately running cmd as admin had no effect on the result. Same exact error.
After the rollback indicated in the log above, only the DQS_STAGING_DATA database remains in the sql server instance. -
SQL Server 2014 Express Installation Failure
Hi,
Now trying to install SQL Server 2014 Express on my work machine. Here is the error log. Any ideas? The error help link is useless.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-06-19 16:24:17
End time: 2014-06-19 16:38:03
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: PC12345
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered Configured
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Scott\Software\SQLEXPRADV_x64_ENU\x64\setup\
Installation edition: Express
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS, CONN, BC, SDK, BOL, SSMS, ADV_SSMS, LOCALDB
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: C:\SQL Server Data
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AS
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: INTERNAL\sbass
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140619_162416\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: LocalDB
Status: Passed
Feature: Setup Support Files
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140619_162416\SystemConfigurationCheck_Report.htmThanks Shanky, that fixed my issue. I reinstalled, specifying NT AUTHORITY\LOCALSYSTEM for the SQL Server Database Engine account. After the successful installation, I used Sql Server Configuration Manager to change the account to LocalService
(NT AUTHORITY\LocalService). The Database Engine is restarting OK.
So, my accounts are:
SQL Server (MSSQLSERVER): NT AUTHORITY\LocalService
SQL Full-text Fiter Daemon Launcher (MSSQLSERVER): NT Service\MSSQLFDLauncher
SQL Server Reporting Services (MSSQLSERVER): NT Service\ReportServer
SQL Server Browser: NT AUTHORITY\LOCALSERVICE
SQL Server Agent (MSSQLSERVER): NT AUTHORITY\NETWORKSERVICE
I check out the link http://msdn.microsoft.com/en-us/library/ms143504.aspx#Serv_Perm. I'm a bit confused how the NT Service\* accounts are created, such as NT Service\MSSQLSERVER. However, I did see this http://msdn.microsoft.com/en-us/library/ms191153.aspx#manual;
perhaps I need to read it further.
Regardless, this is my desktop machine, the installation is for development only, it's inside our network, and no external users will be accessing this SQL Server instance. So, while I haven't fully read the details on running under LocalService, I
believe this will meet my needs.
Thanks again for your help. -
How to set value for trim and bleed using jsx script?
I have tried using bleedoffsetRect but somehow it is not working. Can anybody please help me on how to set value for trim and bleed using jsx script? Any example will be highly appreciated.
Following is the code I am trying with:
var _saveName = new File ( root_path +_strFileName+".pdf");
var _saveOpts = new PDFSaveOptions();
_saveOpts.printerResolution = 300;
var bleedarray = new Array();
bleedarray[0] =9.00;
bleedarray[1]=9.00;
bleedarray[2]=9.00;
bleedarray[3]=9.00;
_saveOpts.bleedOffsetRect = bleedarray;I would expect although I've not actually tried this for the bleed off set box to be larger than the artbaord and the first two values to be negative or 0…
var bleedarray = new Array(-9,-9,artboard.width+9,artboard.height+9);
Where 'artboard.width' & 'artboard.height' you will have calculated from your file. An Array(9,9,9,9); would not constitute any boxes bounds. -
Is there a way to trick MS Service Manager 2012 to use SQL Server 2014 when installing it?
I recently set up a virtual Lab on my laptop. I dont have much resources on my laptop and can only have around 5 servers. the problem is that i already set up SQL Server 2014 standalone and configured all of my services to use that server which works
fine. however when i try to install MS Service Manager 2012 it throws "SQL has to be either 2012 or 2008" error ..
is there a way for me to trick the Registry so Service Manager will install?
Thank youI don't know a trick to install SCSM 2012 on a SQL Server 2014. But maybe you can use a SQL Server 2012 for installation temporary and move the db after installation is done to your SQL Server 2014?
Moving the Service Manager and DW Databases
Might be worth a try. But it's definitely not recommended for a productive environment!
Andreas Baumgarten | H&D International Group -
Installation of SCCM 2012 R2 and SQL Server 2014 error
Hello All,
I am attempting to setup SQL Server 2014 and SCCM 2012 R2 but I keep running into an error stating that "Configuration Manager requires Microsoft SQL Server
2008 SP2 w/ CU9........ all the way up to Microsoft SQL Server 2012 with CU2 or higher." I am using all evaluation versions for this configuration as we are looking to test and evaluate the products. I was trying it with SQL 2014 because I was running
into the same error with SQL 2012 and according to "http://blogs.technet.com/b/configmgrteam/archive/2015/03/30/updated-sc2012-configmgr-sp1-and-sc2012r2-configmgr-support-sql-server-2014.aspx" SQL
2014 is supported with SCCM 2012 R2. SQL is installed locally on the same box.
Any suggestions would be appreciated.
Thanks,
Tucker
Update: When running the Pre-Req check these are some of the failed returns.....
SQL Server Edition: Failed: Configuration Manager primary site and central administration site don't support SQL Server Express Edition
Not sure why it is recognizing SQL Express as this is a new machine.
SQL Server service running account: Failed: The logon account for the SQL Server service cannot be a local user account, NT SERVICE\<sql service name> or LOCAL SERVICE. You must configure
the SQL Server service to use a valid domain account, NETWORK SERVICE, or LOCAL SYSTEM.
For the SQL Service I am using a domain account created specifically for this.This has nothing to do with moving or restoring. The kb article says "This hotfix provides updated versions of the setup files and enables new installations
of the System Center 2012 R2 Configuration Manager site database role and the System Center 2012 Configuration Manager SP1 site database role in Microsoft SQL Server 2014"
Torsten Meringer | http://www.mssccmfaq.de -
SSDT-BI for SQL Server 2014, Command line(silent unattendant automatic) installation script/steps
Hi,
I have downloaded SSDT-BI software and looking for commandline steps,config file for this.
http://www.microsoft.com/en-us/download/details.aspx?id=42313
Any one have Command line installations steps for SSDT-BI automatic(command line) installation for SQL Server 2014 with giving the files location,where to install.....etc, i mean config.xml.
I found below but not sure it will work or not. If any one have working correct command line script, please reply on this forum.
Looking for config.xml file, i searched online and did not find any where with clear config.xml file details.
--Found below from link and not sure it will work or not
http://blogs.technet.com/b/ilikesql_by_dandyman/archive/2013/03/10/how-to-automate-the-installation-of-sql-server-ssdt-office-2013-and-visual-studio-2012.aspx
setup.exe /ACTION=INSTALL /FEATURES=SSDTBI_VS2012 /Q /IACCEPTSQLSERVERLICENSETERMS /norestart
thanks in advance.Hi SQLDBA321,
The SSDT-BI is automatically installed under xxx:\Program Files\Microsoft SQL Server\. Now matter in GUI or command line, we can't change the path. Because SSDT is a feature of SQL Server, not a feature of Visual Studio. It just use the Visual
Studio Shell. So SSDT will only be installed with SQL Server.
Reference:
Install SQL Server Data Tools - Business Intelligence for Visual Studio 2013
If you have any question, please feel free to ask.
Simon Hou
TechNet Community Support -
I want to use Golden Gate to connect MS SQL Server 2005 with Oracle 10g dat
I want to use Golden Gate to connect MS SQL Server 2005 with Oracle 10g database. So, i have installed both databases on different pc's on windows platform. MS SQL Server 2005 on windows XP and Oracle 10g on windows 2003.
I have configure Golden Gate step by step by following oracle guideline:
http://www.oracle.com/technetwork/articles/datawarehouse/oracle-sqlserver-goldengate-460262.html
When i run following command on target (oracle 10g):
replicat paramfile dirprm/inload.prm
I encounterd following error:
2012-05-21 20:27:06 ERROR OGG-00014 Unrecognized parameter: USERID. Paramete
r could be misspelled or unsupported.
2012-05-21 20:27:06 ERROR OGG-01668 PROCESS ABENDING.
My INLOAD FILE Content are:
SPECIALRUN
END RUNTIME
USERID gg_user, PASSWORD welcome1
EXTFILE D:\oracle\gg\dirdat\ex
SOURCEDEFS D:\oracle\gg\dirdef\emp.def
MAP hrschema.emp, TARGET gg_user.emp;
Can you plz suggest me that where i am wrong?
Thanks advance to all experts.amardeep.sidhu wrote:
That should work, just in case try adding DBLOGIN before USERID
DBLOGIN USERID x..No needed in the param file i think.its not needed at all you are right, but what else could it be? Besides any special unseen character :P -
Problems using SQL Server 2014 upgrade advisor on a windows 2008 sp2 server
I got sql server 2014 upgrade advisor up and running on a windows 2012 vm and every thing works fine, but I am having trouble installing it locally for a SSRS Box. The SSRS box is running windows 2008 sp2 enterprise edition, but when I try
and run the SQLUA.msi install nothing happens.
anyone else experience this issue?
Hi jesse,
Welcome to the forum :-)
Can you please clarify your issue in more details. I did not understand what you are doing. What do you mean by "installing it locally for a SSRS Box". Do you mean that you are trying a simple installation which do not work, and raise an error?
If so then (1) we dont need the extra information about "why you need the SQL Server" :-) we just need to help you install it regardless the SSRS. (2) We do need the full error log and the error message that you get.
By the way, The SQLUA.msi is just a small utilities named "Upgrade Advisor"
http://msdn.microsoft.com/en-us/library/ms144256.aspx
Do you want to install the SQL Server itself?
What is your current SQL Server on the local windows 2008 server?
[Personal Site] [Blog] [Facebook] -
I want to set up the Time Machine and I would love to use the Time
Capsule but since I already have a wireless router I need suggestions on
what other
external disks Apple could recommend to use with the Time Machine and
how to configure that disk.
A complication that I need to resolve is the fact that I am using Vmware
Fusion to be able to use Windows on my Mac. Now it seems that Time
Machine is not backing up my files
on that virtual Windows without additional configuration and my question
is whether you can advise me here or whether this is only a matter for
the Fusion virtual machine.If you want to use Time Capsule you can.. you simply bridge it and plug it into the existing router.. wireless can be either turned off or used to reinforce the existing wireless.. eg use 5ghz in the TC which is much faster than your 2.4ghz.
You can also use a NAS.. many brands available but the top brands are synology, qnap and netgear readynas series. These will all do Time Machine backups although how well always depends on Apple sticking to a standard. There are cheaper ones.. I bought a single disk zyxel which was rebadged and sold through my local supermarket. It actually works very well for TM at least on Snow Leopard. Major changes were made in Lion and again ML so do not instantly think it will work on later versions. I haven't tried it yet with those versions.
Any external drive can be plugged into the mac. Use the one with the fastest connection or cheapest price according to your budget. USB2 drives are cheap and plentiful. But no where near as fast as USB3 or FW800. So just pick whichever suits the ports on your Mac. Interesting Apple finally moved to USB3 on their latest computers.
TM should exclude the VM partition file.. it is useless backing it up from Mac OS side.. and will slow TM as it needs to backup that partition everyday for no purpose.. TM cannot see the files inside it to backup just the changes.
You need to backup windows from windows. Use MSbackup to external drive.. if you have pro or ultimate versions you can backup to network drive. But MSbackup is a dog.. at least until the latest version it cannot restore the partition without first loading windows. There are about a zillion backup software versions for windows.. look up reviews and buy one which works for you. I use a free one Macrium Reflect which does full disk backups and is easy to restore.. to do incremental backups though you have to pay for it. -
How to find out which sequence a certain column used?
you konw column C in table T is created by a sequence.
How to find out which sequence column C is using?In the meantime I think it ought to becompulsory to
only assign sequence values in triggers.
Why? I can see no good reason for this. I think it's a good idea to have stuff like this
coded in only one placeI don't like your argument for compulsory using triggers for sequences for exactly the same reason as you, ie that I like to keep my code in one place. If I'm reading some pl/sql code which uses a sequence I like to see the fact that the sequence is used in the pl/sql code, rather than to check to see if theres a trigger on the table and then see which sequence that uses.
"naming conventions can work, provided they're enforced. Alas, like other standards, they can only be enforced by active policing".
Thats what code reviews are.
" there is also the special case of one sequence populating more than one table...."
This is My Pet hate. I don't think there's ever a case where this is absolutely necessary. Again code reviews
Unfortunately I have to live with a system which does this.
and I appreciate we can't all have code reviews, etc. -
SQL Server 2014 Express Installation Error
I get the error shown below when installing SQL Server 2014 Express. Why do I get this and how to correct for it?
TITLE: Microsoft SQL Server 2014 Setup
The following error has occurred:
An error occurred during the installation of assembly 'policy.8.0.Microsoft.VC80.MFCLOC,version="8.0.50727.4027",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32-policy"'. Please refer to Help
and Support for more information. HRESULT: 0x80073712.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xDF039760%25401201%25401
ThanksI have Visual Studio 2013 Professional Update 2 and Visual Studio 2012 Professional Update 4 installed. Here is a section of the log file where the error occurred. Thanks for your help.
(01) 2014-07-07 10:34:28 Slp: Running Action: Install_VSSMO_Cpu32_Action
(01) 2014-07-07 10:34:28 Slp: SetFeaturePropsModifyInstallAction for VSSMO_Cpu32
(01) 2014-07-07 10:34:28 Slp: Sco: File 'C:\Users\xxxxx\Desktop\SQL Server 2014\SQLEXPRADV_x64_ENU\1033_ENU_LP\redist\VisualStudioShell\SMO\x86\SharedManagementObjects.msi' does not exist
(01) 2014-07-07 10:34:28 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
(01) 2014-07-07 10:34:28 Slp: Sco: Attempting to open registry subkey
(01) 2014-07-07 10:34:28 Slp: Sco: Attempting to open registry subkey SOFTWARE\Microsoft\VisualStudio\10.0
(01) 2014-07-07 10:34:28 Slp: Sco: Attempting to get registry value InstallDir
(01) 2014-07-07 10:34:28 Slp: Sco: Attempting to open registry subkey SOFTWARE\Microsoft\VisualStudio\11.0
(01) 2014-07-07 10:34:28 Slp: Sco: Attempting to get registry value InstallDir
(01) 2014-07-07 10:34:28 Slp: Sco: File 'C:\Users\xxxxx\Desktop\SQL Server 2014\SQLEXPRADV_x64_ENU\1033_ENU_LP\redist\VisualStudioShell\SMO\x86\SharedManagementObjects.msi' does not exist
(01) 2014-07-07 10:34:28 Slp: Sco: File 'C:\Users\xxxxx\Desktop\SQL Server 2014\SQLEXPRADV_x64_ENU\1033_ENU_LP\redist\VisualStudioShell\SMO\x86\SharedManagementObjects.msi' does not exist
(01) 2014-07-07 10:34:28 Slp: Checkpoint: PREINSTALL_VSSMO_CPU32_ACTION
(01) 2014-07-07 10:34:28 Slp: Sco: Waiting for service 'msiserver' to accept the stop request.
(01) 2014-07-07 10:34:28 Slp: Sco: Attempting to open SC Manager
(01) 2014-07-07 10:34:28 Slp: Sco: Attempting to open service handle for service msiserver
(01) 2014-07-07 10:34:28 Slp: Invoking QueryServiceStatus Win32 API
(01) 2014-07-07 10:34:28 Slp: Sco: Attempting to close service handle for service msiserver
(01) 2014-07-07 10:34:28 Slp: Sco: Attempting to close SC Manager
(01) 2014-07-07 10:34:28 Slp: Target package: "C:\Users\xxxxx\Desktop\SQL Server 2014\SQLEXPRADV_x64_ENU\1033_ENU_LP\redist\VisualStudioShell\SMO\SharedManagementObjects.msi"
(01) 2014-07-07 10:34:35 Slp: MSI Error: 1935 An error occurred during the installation of assembly 'policy.8.0.Microsoft.VC80.MFCLOC,version="8.0.50727.4027",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32-policy"'. Please refer to
Help and Support for more information. HRESULT: 0x80073712.
(01) 2014-07-07 10:34:38 Slp: Attempting to get HResult for what appears to be an Assembly install error
(01) 2014-07-07 10:34:53 Slp: InstallPackage: MsiInstallProduct returned the result code 1603.
(01) 2014-07-07 10:34:53 Slp: Using MSI error code to detect the retry option: 1935
(01) 2014-07-07 10:34:53 Slp: Retry-able MSI return code detected: 1935
(01) 2014-07-07 10:34:53 Slp: Prompting user if they want to retry this action due to the following failure:
Maybe you are looking for
-
I have a piano accordion with midi, basically its the same as a keyboard. I want to know if I can set up different beats, waltz, quickstep etc on garage band, say for example a drum and guitar sound and then control it with my accordion. Ive come acr
-
What is sparkle and how did it get on my system?
Attempting to empty trash I find a file org.andymatuschak.sparkle.finish-installation.plist which cannot be deleted "The operation can't be completed because the item "org.andymatuschak.sparkle.finish-installations.plist" is in use." I did not instal
-
How to view ALL my files in my iPad?
Hello, How to view all my files in my iPad because the "others" in my iPad is taking a lot of space. Thanks
-
Can't complete CS4 installation
hey all. I am expiriencing a really big issue about adobe. I have tried installing adobe photoshop cs4 and It successfully installed, BUT after I successfully typed the seiral number I was in he stage where I had to accept a licence and when I tried
-
Hello. In open alert I can see next line (High priority) constantly: "10014 primary key range accesses, selectivity 0.28%: 2952691 rows read, 8231 rows qualified" How fix it? Whether it is necessary to pay attention to it or it is possible to ignore?