Incomplete hierarchy in bex query (infoobject 0COSTCENTER)

Hi Friends!
I have a problem with hierarchy on infoobject 0COSTCENTER, the hierarchy is completely loaded into BW system (and is active), but when displays in query bex, cost centers are missing in the hierarchy (nodes and cost centers).
Plaese some help!!
Thanks everyone!

Hi
Even if you have used a hierachy that you know 100% has been loaded correctly - your report results can still "break" it.
Hierarchies work by creating a relationship between parent and children. If you imagine your family: your parents are only related to your children through you actually being in between. If you disappeared from the relationship there would be no direct connection between you parents and your children. Your children are not the children of your parents.
It's the same in BI !
If a node is filtered in a report, the hierarchy mechanism doen't automatically reassign ownership of the children without parents. These are technically orphans.
The result is that even when you use hierarchies with a report that has selections some nodes in the hierarchy work because all the children conformes to the selection whereas other ones do not, and it appears that something has gone wrong.
You can force it to work by adding other key figures into your report that do not have the selection, but you'll have to discuss that with the business.

Similar Messages

  • Imcomplete hierarchy in bex query

    Hi Friends!
    I have a problem with hierarchy on 0COSTCENTER, the hierarchy is completely loaded into BW system (and is active), but when displays in query bex, cost centers are missing in the hierarchy (nodes and cost centers).
    Plaese some help!!
    Thanks everyone!

    Hi Friends!
    I have a problem with hierarchy on 0COSTCENTER, the hierarchy is completely loaded into BW system (and is active), but when displays in query bex, cost centers are missing in the hierarchy (nodes and cost centers).
    Plaese some help!!
    Thanks everyone!

  • Problem with Time-dep hierarchy in BEx Query

    Hi,
    I have a workbook that consists of 3 queries. All the 3 queries uses heriarchy and hierarchy node variables on 0CUST_SALES. The hierarchy is time-dep. 2 of the queries returns the output and 1 of them just displays "No applicable data found" for some of the nodes. I checked the hierarchy table and the date range for the nodes are in the range (01/01/2010 - 12/31/9999), the leafs have the range as 01/01/2010 - 06/30/2010. The 3rd query is the actually the summary of the other 2 queries. I checked the queries and found that the field 0CUST_SALES is on the characteristic restriction pane of the filter tab in the incorrect query and in the remainiing 2 its on the default values pane.
    Will this be causing the problem in the incorrect query?
    There is also a key date derivation type defined in all the queries. Its defined as Basic Time Char with the derivation type as "First day of Period". We are not using any infosets. The quries are on a multiprovider which has only basic infocubes.
    Can someone please explain how this works?
    Thanks and Regards,
    Sujai

    Hi Diogo,
    Below is the code I am using in the customer exit.
    SELECT * FROM zae_tt_pbuild INTO TABLE gt_pbuild.
          IF sy-subrc = 0.
            LOOP AT gt_pbuild INTO gs_pbuild.
              CONCATENATE '*' gs_pbuild-pbuild '*' into lv_pattern.
              ls_range-low = lv_pattern.
              ls_range-sign = lc_sign_i.
              ls_range-opt = 'CP'.
              APPEND ls_range TO e_t_range.
              CLEAR: ls_range,
                     lv_pattern.
            ENDLOOP.
          ENDIF.
         ENDIF.
    I have tried using '%' instead of '*' aswell but the result is same.
    Thanks,
    Rakesh

  • Problem in Hierarchy in BEX Query

    Hi ALL,
    I have created Query for balance statements & Profit ,Loss statement by using hierarchy. It  is execuiting in perfectly.But the problem is "I want in the query output hierarchy with only 1 node that is Profit/loss node."
    I have done restriction on that node only. But I am not getting the output for that node.
    If I add one more node for Profit/loss node it is showing data.
    my question is If I restrict only one node why it is not working?
    please give me suggestions on this. <b>we need only one node in the output Hierarchy.</b>
    Plaese give me the steps Regarding this.
    Thanks,
    kiran.

    Hi srikanth,
    thanks for ur reply,
    My hierarchy having like this:
    Fiancial satement
              |--->Source of funds
              |---->App.of Funds
              <b><b>|---><b>Profit/loss node</b>->caliculated Profit</b></b>
              |------>Income
              |------->expendature
              |------->Un assained Node.
    1. I have not used any Structure .
    2. I have placed my Hiearachy in ROWS and I ahve restricted only Profit/Loss Node.
    ( But If I select only 1 node in Restriction data is not getting in query)
    IF I select "profit/loss node " & some other node in Restriction data is coming in the output of Query.
    What is the reason for this.
    whatt I have to do to get only 1 node in the output with values.
    Thanks,
    kiran
    Message was edited by:
            kiran manyam
    Message was edited by:
            kiran manyam

  • Hierarchy in Bex Query

    Hi,
    How to assign hierarhcy in the row of a query thru query designer? I have a hierarchy and I would like to asssign the whole hiearachy in the row and not only nodes.
    Please advise.
    Best Regards,
    UR

    Hi UR
    Presentation Hierarchy
    You can present the characteristic as a hierarchy. Choose  to select a hierarchy. The hierarchy is flagged automatically as an active presentation hierarchy. If you deactivate the Active checkbox the characteristic is not displayed in the query as a hierarchy but as a basic list.
    If you restrict the characteristic to a hierarchy node the node hierarchy is adopted automatically as the presentation hierarchy. You can deactivate the presentation hierarchy here if necessary.
    You can set the sorting within the hierarchy according to the Key or Name in Ascending or Descending order. If you do not make any entries, the values are sorted as determined in the hierarchy.
    Each hierarchy has certain properties that you specify in the hierarchy definition. You can override the following hierarchy properties for the current hierarchy:
    ·        Expand to level
    In column B (user settings), select the checkbox and enter a numerical value for the hierarchy level that you want to expand the hierarchy to.
    ·        Position of lower-level nodes
    In column B (user settings), select the checkbox and choose whether you want to position lower-level nodes Down or Up. Choose Up if, for example, you want to see the overall result at the bottom.
    ·        Values of posted nodes
    In column B (user settings), select the checkbox and choose whether you want to Display or Suppress the values of posted nodes.
    In hierarchies, nodes always display the aggregated values of the subordinate nodes and leaves. If a node has a posted value, you cannot see this. To display this posted value, an additional leaf is inserted that has the same name as the node. This leaf displays the value posted to the node.
    In the following example you see that for cost center A1 an additional leaf has been added and the value of cost center A1 itself (10) is displayed. This additional leaf does not exist in the hierarchy. You can display or suppress this leaf (with the value of the posted node).
    ·        Nodes with only one lower-level node
    In column B (user settings), select the checkbox and choose whether you want to Display or Suppress the values of nodes with only one lower-level node. Suppressing nodes with only one lower-level node helps you to reach the more detailed information quickly.
    In the following example, Cost Center A and Cost Center A.1. contain the same information since Cost Center A has only one lower-level node in the hierarchy. If you are interested in the detailed data for the individual cost centers, you can suppress the uppermost node with only one lower-level node as this does not contain any additional information.
    Activities
    Drag a characteristic into a directory in the Query Designer (rows, columns, free characteristics or filter), select it and choose Properties from the context menu. You get to the Characteristic Properties dialog box.
    For more details plz fo thouh the link.
    [[http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm||http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm]

  • Hierarchies over BEx query

    this is my hierarchy in  BEX query
                               course(node id:1 header)
                    training grp 1                  training grp 2             training grp3----
    level 1(node id 2)
    -training grp 4(parent is grp 1,LEVEL2)   
            - training type1(leve 3)
             -training type2(level1 3)
    now in crystal reports i am able to achieve by grouping at training grp(level 2) and training type and summarizing the keyfigure .However, i am not able to get or display the training grp at level 1.so how to get it?
    2) is there any way to group on trainig grp only on level 1?I tried to created group expert  and restrict with values in level 1, but it didnt work.
    ie. i want  the same way when we run the report in bex analyzer where we are using the hierarchy in rows and key fig in clumns.
                                                       kf
    trainig grp 1                               1000
       training grp 4                            1000
           trainig type 1                          500
           trainig type 2                         500

    See this post: Classic Crystal Reports and Classic SAP connectivity questions

  • Aggregation Issue when we use Hierarchy InfoObject in the Bex Query.

    Hi All,
          I have created a bex Query having some Char's and one hierarchy Infoobject in Rowa and RKF's. I haven't used any Exception aggreagation Objects in RKF. but, when I execute a query in the Over all result it's showing the Exceptional aggregation based on the Hierarchy Object.
    Briefly Illustrated my problem here.
    OrgUnitHierarchy     EmpID       RKF
    Root                          1                1
    RootA1                     1                1
    RootA2                     1                1
    Root                          2                1
    RootB1                     2                1
    RootB2                     2                1
    Root                          3                1
    RootC1                     3                1
    RootC2                     3                1
    Over all result                              3
    In the above example the Sum of the RKF is 9. but its showing only 3. When I Connect this with crystal report is the sum of RKF is showing 9. Please help me which is the correct one and why it's not aggregating child nodes?
    Is there any Config needs to be done to aggregate all the nodes of the Hierarchy? Thanks for your support in advance
    Regards,
    Shiva

    Hi,
    is this related to BEx Analyzer or BEx Web Reporting ? if so then I would suggest to post the entry into BEx Suite forum as this forum is for the SAP Integration Kit from BusinessObjects.
    Ingo

  • Hierarchy Performance in BO 4.0 direct to Bex query

    Hi
    We are using BO 4.0 using BICS connection.
    Webi report is connected directly to BEx query.
    We are getting perforance when selecting Hierarchy in new BO 4.0 environment.
    In what way we can reduce this performance.
    The report is taking around 30 minutes and some time time out.
    Is this product issue
    Regards
    Gaurav Mang

    Hi,
    1. you can "suppress unassigned nodes" in RSH1
    2. you can enable Query Stripping in webi query panel and webi document properties
    3. you can enable BICSLOVChunking registry settings
    --> Note 1581323 - BI 4.0 Web Intelligence very slow performance when using BICS
    4. modify the WebiParamMaxLovSize settings
    --> Note 1671774 - "OutOfMemory exception" and poor performance when accessing large LOV's in WebIntelligence (using Desktop client or Launchpad) using BICS to connect to BEx query
    5. you should implement all the latest BW correction from the BI-RA-BICS component, such as BICS Note 1593802  Performance optimization when loading query views 
    6. You should use the latest available Patch2.12 (optimizations since 2.10 are very good)
    7. you should answer as many Filters (Bex variables) as possible during runtime.
    Regards,
    H
    p.s. after these steps,  the rest is down to Document, Query, and Datamodel design.

  • Hierarchy: How to suppress duplicated/repeated rows in a BEx query

    Hi Gurus.
    I have a BEx query which displays data based on a Cost Element hierarchy.  When the hierarchy is expanded to leaf level (or any level), all key figures and characteristics are displayed for the leaf level but are also repeated throughout all the levels above.
    Is it possible to suppress the repeated rows in higher levels of the hierarchy and display a summary result only?
    The issue we have is that if the user wishes to export or save a workbook, they will have to filter and manipulate the report a great deal which is impractical.
    I'm hoping it's a simple setting that I've missed.  I look forward to receiving the magic answer!! :o)
    Thanks,
    Angela

    Hi All,
    I've been playing around a bit more and found a setting which I hope my users will find acceptable:
    From the query - Query properties -> Data Formatting tab - Multidimensional View -> select Display Rows hierarchically and expand to (chosen characteristic)
    Can anyone tell me if I can set this as a default setting in the query designer, or will I need to create a view to save the setting?
    Thanks all,
    Angela

  • Bex Query timestamp InfoObjects does not display time in Webi

    A BW InfoObject, defined as NUMC14 (TIMES), will display data like "09/13/2011 13:40:26" in a Bex Analyzer query. 
    How do you get this type of display in Webi?  Currently, my webi report (based on the Bex query connection) displays the field like "09/13/2011 13"

    Hello,
    any ideas? Any additional information needed?
    Best Regards,
    Hannes

  • Refreshing Hierarchy node variable in BEx query with change in hierarchy

    Hi all,
    We have used a hierarchy node variable on Characteristic ZECCSAC (user-defined) and used it in a BEx query with default value set to a particular node value. Upto this, it is working fine.
    The hierarchy used in the query, with the hierarchy node variable, was later changed ( and in future it can undergo changes ). Since the number of records in the hierarchy are changing, the nodenames of the hierarchy nodes are changing. But the hier node variable default value is still set to the earlier nodename for that node description. So at runtime it is giving an error "ECCS Account Number is invalid"!
    Can anyone suggest how to refresh a hierarchy node variable default value each time a query is run so that the latest nodename is always taken ?
    Quick reply will be appreciated.
    Thanks

    Hi,
    You get this with User exits.
    Thnaks

  • Drill Down BeX Query with hierarchy in WEBI

    Hi,
    I am using a Bex Query with Hierarchy in my WEBI report. Is it possible to drill down ? I am not able to use Scope of Analysis because it is disabled. I am very new to WEBI. Please help me out.
    Thanks in Advance.
    Lakshmi Mohan

    http://www.google.co.in/url?sa=t&rct=j&q=drill%20down%20bex%20query%20with%20hierarchy%20in%20webi%20%20%20&source=web&cd=2&ved=0CDQQFjAB&url=https%3A%2F%2Fcw.sdn.sap.com%2Fcw%2Fservlet%2FJiveServlet%2FpreviewBody%2F137316-102-1-277519%2FWeb%2520Intelligence%2520on%2520SAP%2520implementation%2520best%2520practices.pdf&ei=xofcTpSgF5DJrAeaxpiIBw&usg=AFQjCNHuwDIpvxciPKJyEdoz3GiVjRKgqA
    http://www.scribd.com/doc/62293080/40/Query-Drill-for-hierarchies

  • Hierarchy Level value displayed in BEx Query

    Is there a way to display the Hierarchy Level value (0, 1, 2, etc...) associated with each hierarchy level in BEx Query as a characteristic?
    we are currently using the Crystal Reports function HierarchyLevel(GroupingLevel(GL Account Node id)) to display the level of the node (0, 1, 2, etc...).  Is there something similar to this in BEx Query.
    We would like to use this Level value to do groupings in Crystal Reports.  When we try to create a Group, we can only create the groups on fields that are brought over in the BEx Query results.
    Thanks --

    Hi ,
    Hierarchy level can be defined in Bex query as well.
    In the query property there is option where you can say hierarchy active for that particular object.
    Also you can define level upto which it can be active in initial display say 3 level
    Also when you want to drill down further level 4,5 you can right click and select that particular level say 4 or 5 or 6.
    If you want to display hierarchy flat there is no option in BW then to right code,but I heard in crystal report it will automatically display in fl;at version as well  means
    Level 0 level 1   ......KF1 KF2  etc.
    Thanks and regards

  • Custom Hierarchy sub selection from BEx Query to Webi

    Hi All,
    The client has requested that from a hierarchy only certain accounts / account nodes be brought into the Webi report.
    I have made a Account Number Filter in the BEx query containing the nodes that the client has requested. In order to get a hierarchical view, I activated the hierarchy display through BEx and selected the hierarchy the the selection of the nodes came from.
    I ran the report through Analyzer and all works - the only nodes that show are the nodes that were filtered on through query designer and all lower nodes below it. It displays as a hierarchy properly.
    When running in Webi, I bring in the hierarchy object for Account number and the report crashes giving me the general Webi error. (I have added a screenshot).
    In conclusion, what I am trying to do is take a sub selection of certain account nodes from a hierarchy and display those nodes with all lower levels below in a hierarchy. It works in BEx, not in Webi.
    If this won't work in Webi, any idea how to build this in BEx so it will work in Webi?

    I haven't tried this myself yet - but did you register your Google API key?  Please see Google Maps in SDK Extension

  • Using 2 BEx query structures - Not displaying as a hierarchy

    Gurus,
    I have CR2008, and I am using a BEx 7.0 query that has 2 structures.  One structure is key figures, the other is a layout that I turn on and display as a hierarchy.  There is cell definition behind the query.
    How can I get this second structure to view as a hierarchy in Crystal?  The cell definition is calculating correctly in Crystal, however all of the Profit Centers show on the same line, without indentation.
    If I create a Profit Center hierarchy in BW and bring it into Crystal, then I cannot use the cell definition, which is needed to calculate the correct results.
    Thanks in advance for responses.
    Scott Friery

    Help please!!  I really need some guidance for this problem?  Can I manually modify how the structure looks once I bring it into Crystal and drop into the "Details" section of the designer?
    The structure from the BEx query looks like this in Crystal:
    Global Sales
    Western Region Sales
    Location 1
    Location 2
    Location 3
    Eastern Region Sales
    Location 4
    Location 5
    Location 6
    I want the structure to look like this (and it does in the BEx 7.0 query designer)
    (No Indent) Global Sales
           (Indent 1 Space )Western Region Sales
              (Indent 2 spaces)  Location 1
              (Indent 2 Spaces) Location 2
              (Indent 2 Spaces) Location 3
           (Indent 1 Space) Eastern Region Sales
                (Indent 2 spaces) Location 4
                (Indent 2 spaces) Location 5
                (Indent 2 spaces) Location 6
    Any help is appreciated.
    Scott
    Edited by: Scott Friery on Feb 24, 2011 8:07 PM

Maybe you are looking for

  • Error in recent Photoshop update

    I tried to update Photoshop and received an error in update twice. Now my Creative Cloud shows it updated but when I try to open my Photoshop CC (64 bit) I get an error that says "Photoshop.exe - Entry Point Not Found...The procedure entry point ?Ter

  • Can somebody tell me how to transfer songs from my ipad to a new laptom - itunes

    I have a new laptop but saved all my songs on my ipad, how tp transfer to new laptop

  • 6D users : Movie freezing during taking stills ?

    Hello there, I use a Sandisk Extreme pro SDHC UHS-I card up to 95mb/s (I think one of the fastest at this moment on the market ) but if I try to take a still shot during video recording , the video will freeze on playback no matter what format of mov

  • PR Deletion flag set in LIMITs tab but not in Account Assignment tab

    Can anyone help with this scenario? On the "Limits" tab of a PR, user enters multiple accounting lines. This results in table entries in both ESKL and EBKN Then, one ore more lines in the "Limits" tab get flagged for deletion but the cooresponding li

  • Java version installed is not recoginized

    Here's my problem i hope you all can help. I have a need for 2 versions of Java. Version 1.4.2_06 for 1 web site and version 1.4.2_10 for another web site. I already have the 1.4.2_06 installed. After the IT Dept installed version 1.4.2_10 when i go