Iphoto movies too large for screen after upgrade
My movies in iphoto recently stopped playing, so I turned to the forums and tried the fix related to upgrading to Snow Leopard. This mostly worked (I also had to open Quicktime 7 to kick it off), but now the movies, especially in portrait format, extend below the bottom of the screen. Since the resizing and controls are on the bottom of the pane, I have no way of accessing them, so I cannot play the clips or resize. Any suggestions?
Close off Safari from multitasking:
Double-tapping the Home button will bring up the running apps icons along with an app screenshot "card" above the icon. Tap-drag the app's -card- (NOT the icon) up and off the screen.
Next, reset the iPad:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.
Similar Messages
-
Mac Mini display is too large for screen on only one user account
Okay, so I left my two year olds alone for a minute playing the "alphabet game" on my Mac Mini. They only had the keyboard, no mouse but managed to muck up my display leaving me a bit frustrated. The screen is now too large for my Samsung display. The only way to see everything (dock, top bar, etc) is to move my mouse arrow to the end of my display and see it roll back onto the page. I've checked the settings there and they are fine. The MacBook Pro plugs right in and is proper resolution. So I then wondered if another account on the Mac Mini would do the same thing. I logged out of my Admin account and into another and everything looks just dandy. I log back into my Admin account and it's too large and blurry again. The resolution is set correct at 1920x1080 at 60 Hz.
What button did they push on my keyboard that would do this and how do I get it back?? Aargh! Thanks all!Ha, figured it out myself from another discussion forum finally. Thoght I'd share in case anyone else runs into this. They must have hit "Zoom" by htting the "Control" and scroll buttons at the same time..
Resolution:
You can zoom out by holding down the Option and Command buttons on the keyboard and, while you hold them down, pressing the - key. -
OS10.3.1 a disaster! Among other things, the dsplay is too large for screen
I do not like OS 10.3 ! After my Z10 was updated to 10.3.1.1779 about a month ago, I access it because the password entry keyboard displayed for about 1/10 sec leaving a black screen.
After a device reset the device the keyboard remained visible but did not respond to touches (actually it did respond randomly to some). Finally another reset gave me a usable keyboard.
But the device always opens with an icon display about 20% too large for my screen and requires several shrink attempts before the proper size displays. Each attempt simply bounces back to the oversize state.
Unfortunately, this also happens with every app (including "Settings") opened. Yesterday, I couldn't return to the main of Settings because the sub-page wouldn't shrink to expose the "<' button - a close and re-open was the only way to get back to the main page.
Other points I hate about the OS: I've noticed my active wallpaper (not custom but from 10.2) is not listed in the the new 10.3 wallpaper list and since I don't know where its stored I can't try one of the newer ones without giving up on the present wallpaper.
The date displayed on the home screen is too faint to be read with my wallpaper. I know there are some people who think black on black is cool; they obviously have great eyesight. The new 10.3 compass is now totally useless and the new clock is not much better but is at least still usable by a change to a digital display.
I recently tried to check the time on a sunny afternoon and gave up because I couldn't make out the white lines on the black background. I find the stupidity of black on black unfathomable and in over 40 years of software development I have never seen something as wasteful of engineering time as products with poor user interfaces (i.e. black on black). Why can't these apps offer the user the ability to change the colour?
The calculator has also regressed. Again all black (cool!), though that's not the issue here. For the longest time I thought it no longer supported scientific operations until I accidentally got a lucky swipe to bring it into view.
However, the requirement of a half-dozen swipe attempts for each display change reduces this app to a space waster or only to be only useful for simple operations and units conversion. I'm going to try a reload of the OS but unfortunately that won't improve the apps.
Is this standard procedure that Blackberry destroys all (blackberry) apps of the previous version with new ones at each update and offers no way to get back or protect against such changes?Hi All,
I have already checked below configuration T-Code Value :
T-Code : OBA0 :
Tolerance for Groups of G/L Accounts in Local Curre :
Debit posting : 0 TWD, Percentage 0 %
Credit posting : 0 TWD, Percentage 0 %
T-Code : OBA4 :
Upper limits for posting procedures :
Amount per document : 9,999,999,999,999
Amount per open item account item : 999,999,999,999
cash discount per line item : 1%
Permitted payment differences :
Revenue : Amount 100, Percent 1%, Cash discnt adj. to : 100
Expense : Amount 100, Percent 1%, Cash discnt adj. to : 100
I don't understand when AR open item amount is USD 100.3, and incoming payment 101.12, The system can auto clearing by current configuration, but change the AR open item amount to USD 0.3 and change incoming payment amount to 1.12, The system alert error message "The difference is too large for clearing". The same system configuration and the same "Not assigned" value in choosing open item screen, but produce different results!
How should i change the configuration?
Best regards,
Eric
Edited by: Eric Yang on Sep 12, 2008 2:12 AM -
HELP! Display appears too large for screen!
Weird thing happening... The display on my iPhone for some reason is appearing too large for the screen, as if I zoomed in on the display slightly. I can't figure out a way to fix this.
Here's what it looks like. Notice the bottom half of the "scroll to unlock" is cut off... the whole thing is off-centered bcause of the zoom) http://i37.tinypic.com/25qvpr4.jpg
I updated to the latest software/etc... because I figured that that might resolve the issue. Restarted the phone. Can't fix. Trying to avoid my local Apple store, since it's an absolute mob scene. Any advice?
Message was edited by: cohanj087You have zoom on, probably.
http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
The manual will tell you how to turn it off.
Page 190:
"Turn Zoom on or off: In Settings, choose General > Accessibility > Zoom and tap the
Zoom On/Off switch.
Note: You cannot use VoiceOver and Zoom at the same time.
Zoom in or out: Double-tap the screen with three fingers. By default, the screen is
magnified by 200 percent. If you manually change the magnification (by using the tap-
and-drag gesture, described below), iPhone automatically returns to that magnification
when you zoom in by double-tapping with three fingers.
Increase magnification: With three fingers, tap and drag toward the top of the
screen (to increase magnification) or toward the bottom of the screen (to decrease
magnification). The tap-and-drag gesture is similar to a double-tap, except you don’t
lift your fingers on the second tap—instead, drag your fingers on the screen. Once you
start dragging, you can drag with a single finger.
Move around the screen: When zoomed in, drag or flick the screen with three fingers.
Once you start dragging, you can drag with a single finger so that you can see more
of the screen. Hold a single finger near the edge of the display to pan to that side of
the screen image. Move your finger closer to the edge to pan more quickly. When you
open a new screen, Zoom always goes to the top-middle of the screen.
" -
PSE Workspace too large for screen
I'm using PSE v.11 with OSX on an iMac.
The PSE workspace is too large for the screen e.g. the five icons to the left of "Add Event" on the lower control bar are not visible.
Have noted previous discussions have mentioned a "green button" - what's that ?
Help appreciated.But I'd try going to system prefs>displays and changing your resolution a few times till it snaps into place. You aren't running this on a first generation macbook air, are you?
-
Lumia 635/WinPhone8.1 emails too large for screen
recently upgraded from 620 to 635 and im beginning to think it was a mistake.
build quality and speed issues aside, whats annoying me most today is that many emails with embedded pics dont fit on the screen (theyre too big) and wont zoom out or scroll across so i lose large portions of the right hand side of the message. is there a way to stop this and make it "fit to screen" as i cant find anything in settingsHi tremph,
Thank you for your question. You can change the window size with a few cool add ons [https://addons.mozilla.org/en-US/firefox/addon/automatic-window-resizer/ Automatic Window Resizer] and [https://addons.mozilla.org/en-US/firefox/addon/firesizer/ Firesizer].
# In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''' to continue to the about:config page.
# What is the feature [http://kb.mozillazine.org/Browser.display.screen_resolution] -
Keyword list in iPhoto is too large for effective searches
My keyword list in iPhoto is rather long. If I start searching for a photo by keywords, the opened list is too long to fit on the screen. With other words all keywords before "G" can not be reached. What can I do?
Börries KemperSearch using Smart Albums:
Keyword -> is -> etc
And then left Aple know the problem:
IPhoto menu -> Provide iPhoto Feedback -
Backup is too large for iCloud after Adding iPhone?
Hi, I just added an iPhone 5c to my iCloud backup. Previously it had just been my iPad 3. All was well.
After I added my iPhone 5c, I enabled Photostream to upload all of my photos from the iPhone to iCloud to share on my iPad. It was after this that I got the message I had run out of room on my iCloud account to backup the iPhone.
So I'm a bit confused.
Aren't the Photostream images seperate from my iCloud account? Shouldn't the iCloud account only be backing up data not duplicated elsewhere like iTunes, Photostream, Contacts, Mail, etc? I haven't been using the iPhone 5c long enough to generate a lot of Messages. So I don't really understand why the iPhone data alone would be pushing me over the limit, of the iPad, which is similarly limited data.
Any thoughts? Is this somehow the problem of two devices backing up to iCloud and duplicating info?icloud has 5gb of free storage which is not a lot for backing up multiple devices
you can delete backups for devices to make room by going to settings > icloud > storage and backup > manage storage
but in the long run if you want to have both devices backed up you will probably either need to use seperate icloud accounts for each device or upgrade your storage plan to 15gb for 20$/year -
Recently got a new Ipod Classic (160gb) and some of the podcasts and movies and stuff are cut off on both sides of my ipod. They fit the top and bottom of the screen, but are too wide. Whats up?
Hello nick4tivy,
And welcome to Apple Discussions!
Have you made sure you haven't turned widescreen on? To check head to the Videos section of your iPod and choose "Settings". Make sure *TV Screen* is set to Standard and see if that helps.
Otherwise, depending on where the video came from, you may have to use a third party utility to help change the resolution of the video. If it was downloaded from iTunes, you will not be able to do anything about it. Sorry.
B-rock -
Is there a way to adjust the cable box so that the picture adjusted properly to fit the screen? Currently I have a Phillips 30 inch Widescreen HD tv and certain channels dont fit the screen. (ESPN News QVC Fox Business) . The Tv does not have a strecth or zoom feature, I looked in the manual.
james6912 wrote:
Is there a way to adjust the cable box so that the picture adjusted properly to fit the screen? Currently I have a Phillips 30 inch Widescreen HD tv and certain channels dont fit the screen. (ESPN News QVC Fox Business) . The Tv does not have a strecth or zoom feature, I looked in the manual.
What do you have your 4:3 override set to? Try setting it to "OFF". This will output in whatever your HD resolution is set to with "pillars" for SD content. The other thing is what do you have the output resolution set to? My guess is that your 30" set has a native resolution at 720p (or near that). If you are set for 1080i output it may be the scaler in your TV causing the image over the screen size issue.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. -
Adobe Interface too large for screen-cannot read
Have just downloaded free trial of Adobe Acrobat Pro 9 beta
-- cannot see the entire screen -- can anyone help?
Thank you!Hi boraxo99,
Thanks for your post. However, this Forum is meant to discuss
issues related to acrobat.com and not acrobat. To post an issue
related to acrobat please visit the acrobat forum :
http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/
You may also open a web case with Adobe Support. To do so,
please visit the following link :
https://www.adobe.com/cfusion/support/index.cfm?event=portal -
I created a movie in iMovie (very limited editing or rendering) and it's about 45 mins and 9.5 GBs. How do I import it into iDVD so that it will fit on a standard disc?
Thanks...Well, if you have iLife '08, you should download iMovie HD 6:
http://www.apple.com/support/downloads/imovieHD6.html
And Patrick is right. iDVD will compress the iMovie project. 45 minutes and 9.5 gigs is about right. 60 minutes and 12 gigs is normal. -
I am getting error "ORA-12899: value too large for column".
I am getting error "ORA-12899: value too large for column" after upgrading to 10.2.0.4.0
Field is updating only through trigger with hard coded value.
This happens randomly not everytime.
select * from v$version
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for Linux: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
Table Structure
desc customer
Name Null? Type
CTRY_CODE NOT NULL CHAR(3 Byte)
CO_CODE NOT NULL CHAR(3 Byte)
CUST_NBR NOT NULL NUMBER(10)
CUST_NAME CHAR(40 Byte)
RECORD_STATUS CHAR(1 Byte)
Trigger on the table
CREATE OR REPLACE TRIGGER CUST_INSUPD
BEFORE INSERT OR UPDATE
ON CUSTOMER FOR EACH ROW
BEGIN
IF INSERTING THEN
:NEW.RECORD_STATUS := 'I';
ELSIF UPDATING THEN
:NEW.RECORD_STATUS := 'U';
END IF;
END;
ERROR at line 1:
ORA-01001: invalid cursor
ORA-06512: at "UPDATE_CUSTOMER", line 1320
ORA-12899: value too large for column "CUSTOMER"."RECORD_STATUS" (actual: 3,
maximum: 1)
ORA-06512: at line 1
Edited by: user4211491 on Nov 25, 2009 9:30 PM
Edited by: user4211491 on Nov 25, 2009 9:32 PMSQL> create table customer(
2 CTRY_CODE CHAR(3 Byte) not null,
3 CO_CODE CHAR(3 Byte) not null,
4 CUST_NBR NUMBER(10) not null,
5 CUST_NAME CHAR(40 Byte) ,
6 RECORD_STATUS CHAR(1 Byte)
7 );
Table created.
SQL> CREATE OR REPLACE TRIGGER CUST_INSUPD
2 BEFORE INSERT OR UPDATE
3 ON CUSTOMER FOR EACH ROW
4 BEGIN
5 IF INSERTING THEN
6 :NEW.RECORD_STATUS := 'I';
7 ELSIF UPDATING THEN
8 :NEW.RECORD_STATUS := 'U';
9 END IF;
10 END;
11 /
Trigger created.
SQL> insert into customer(CTRY_CODE,CO_CODE,CUST_NBR,CUST_NAME,RECORD_STATUS)
2 values('12','13','1','Mahesh Kaila','UPD');
values('12','13','1','Mahesh Kaila','UPD')
ERROR at line 2:
ORA-12899: value too large for column "HPVPPM"."CUSTOMER"."RECORD_STATUS"
(actual: 3, maximum: 1)
SQL> insert into customer(CTRY_CODE,CO_CODE,CUST_NBR,CUST_NAME)
2 values('12','13','1','Mahesh Kaila');
1 row created.
SQL> set linesize 200
SQL> select * from customer;
CTR CO_ CUST_NBR CUST_NAME R
12 13 1 Mahesh Kaila I
SQL> update customer set cust_name='tst';
1 row updated.
SQL> select * from customer;
CTR CO_ CUST_NBR CUST_NAME R
12 13 1 tst Urecheck your code once again..somewhere you are using record_status column for insertion or updation.
Ravi Kumar -
My iPhoto Library (version 8.1.2) is 280GB (greater than 50% of my 500GB total storage memory on my iMac. It was too large for me to drag it to a new hard drive so the Apple geniuses did it for me. However they did not delete the Library from my iMac (that's my responsibility). I dragged it to Trash and when it started to move I clicked over to the new hard drive to confirm it had indeed been copied. I became nervous when I didn't see among the few files on this otherwise empty new hard drive anything that resembled a 280GB Library so I cancelled the migration to trash.
How can I be sure that my iphoto has been copied and that all my "metadata" survived in tact?the new backup drive
I thought the new drive would be your data drive to host the iPhoto library. Do you also use it for TimeMachine backups?
I am unable to search either in email as well as Finder. I AM able to search within iPhoto though, thankfully
Spotlight may still be busy rebuildig its index.
You could try to rebuild the Spotlight Index, if you do see no progress:
Spotlight: How to re-index folders or volumes
I hope, other frequent posters will drop in. I have not used iPhoto 8.x in long time. -
I recently updated to iTunes 11 on my Windows PC. Since the update, each time I open iTunes its window is too large for my screen. Resizing it is a pain, because I have to change my screen resolution. And then when I restart iTunes, it has reverted back to being too large. Please help!
Having the same issue here....a quick fix is to just minimize the window, and immediately maximize it. It will now fit the screen. Trouble is, after you close it, you'll have to do it again when you re-start itunes. The good news is it takes all of about 2 seconds. Apple should fix this. Should.
Maybe you are looking for
-
I have an itunes account in Euro. I received iTunes and AppStore Gift Cards in $US. How can I use these on the same iWhatever and keep together music/apps bought in the 2 currencies? Thx
-
I want to be able to access a hard drive wirlessly from my ipad. There is no internet available. Can i make this work?
-
I bought a second hand i phone 3g im trying to put facebook app on but it tells me i need ios 4.3.
i bought i phone 3g but trying to put the facebook app on but it tells me that i need ios 4.3. does anybody no what to do or a link for face book mine is 4.2.1 thanks
-
Purchased an HTC phone a month ago. The users guide that was supposed to come in the box was not there. I've spoken to sales personnel as well as manager and still NO user guide. They've offered to give me a link to the guide online or print a cop
-
guys i need to get my itunes account unlocked its stopping mefor making in app purchases please help need to make a purchase within 30 minutes