Multiple people access same form over different sessions?

I am in residential property management. I would like an online form my customers can fill out to give us critical information pertaining to their property (bed/bath/size, etc.) and about their account with us (their contact info, insurance company info, maintenance preferences, etc.). I would like the form to be accessible by the client, and by us over time to make corrections or updates as needed. This is because an owner might not have all info needed for the form the first time the start to fill it out. Also, we need to fill in some information they don't know. Is this possible with Adobe Forms Central?

Hi,
It is possible for a user to fill out the form and save the data and then edit the form data again before they finally submit it. Once the form is submitted, the user cannot edit their previous response any more. But as a form owner, you may fill in more information in the Response table directly.
Thanks,
Wenlan

Similar Messages

Use the same form with different button turned on in different calls

Can I use the same form with different buttons turned on in different calls?
Thanks!

This is to avoid piracy. What could happen is, people could buy music, and give it away for free online. Usually it is then you buy a complete album off iTunes that it will only be available on one device. It is tied to that account, and the device must be registered to that account to listen to it.

How to open multiple instances of same form thru menu items

i'm not able to open another instance of the form.....if i want to open multiple instances of same form ...what should i do???

Hi Shenaz,
To open multiple instances of the same form you need to set a different FormUID to each form you open.
So lets say your FormType is MyFormXPTO. You need can set the FormUID as MyFormXPTO_1, MyFormXPTO_2, and so on.
If you need a code samples, take a look at this post.
Regards,
Vítor Vieira

Mounting multiple directories with same name on different severs to a single mount point on another server

We have a requirement where in we have multiple solaris servers and each solaris server has a directory with the same name.
The files in these directories will be different.
These same name directories on multiple severs has to be mounted to a single directory on another sever.
We are planning to use NFS, but it seems we can not mount multiple directories with same name on different severs to a single mount point using NFS, and we need to create multiple mount points.
Is there any way we can achieve this so that all the directories can be mounted to a single mount point?

You can try to mount all these mount points via NFS in one additional server and then export this new tree again via NFS to all your servers.
No sure if this works. If this works, then you will have in this case just an additional level in the tree.

TS1382 I want to add multiples of the same song from different playlists to my ipod but iTunes wont let me. How can I override this so that I get the songs I want on my ipod?

I want to add multiples of the same song from different playlists to my ipod but iTunes wont let me. How can I override this so that I get the songs I want on my ipod?

You can sync those different playlists to the iPod, and the song appears on each playlist. However, the song is stored on the iPod once. What is the practical reason for wanting to store the same song file multiple times (and waste storage space) on the iPod?

HT201616 Multiple versions of same song by different artists

iTunes used to have a feature where you can view multiple versions of the same song by different artists. Is there still a way to do this without having to search through the entire iTunes store? That way takes forever and I have to sample tracks that are completely unrelated, but just happen to have the same title. Why in the world would the dumb iTunes geeks take this feature away. Someone please help. Thanks!

Have not been in ITUNES Store in quite awhile but
If it was a function, it would rely on the person or persons who authored the song to insure you did get the same lyrics so to speak.
So, if you didn't know the artist you wanted - or the authors of the song - you would have to sample them until you hit the correct one.
Itunes did grow over time - and if they did have cross reference by authors they may have removed it - on the other hand like searches may have worked because of a limited database at the time - it did seem to start adding songs based on searches that brought up nothing one time - and a month later there they were.
ITUNES has over time added restrictions - for instance at some point - you had to allow this computer on Itunes in order to have itunes synchronize to an IPOD (I purchased about 6 songs on old mac - after migration synchronized fine until they stopped - finally mac allowed more than one device so I could add this one and synchronization started again).
Here are latest restrictions with windows and Mac if you want to burn CD's of your itunes
cant burn cd in itunes
http://support.apple.com/en-us/HT203173
http://support.apple.com/en-us/HT203164
http://support.apple.com/kb/PH12147?viewlocale=en_US&locale=en_US
Important: You can’t burn movies and TV shows purchased from the iTunes Store to a DVD or VCD that plays in a DVD player or to a Video CD.
http://support.apple.com/kb/PH12149?viewlocale=en_US&locale=en_US

Updating the same row in different sessions

Hi,
I've one table application(appl_no varchar2(10), locked_user varchar2(8)) which is used to track which user is logged in at present.
As soon as any user is logged in to the system via front end, the user ID is populated to locked_user column so that no other user cannot access the same appl_no. As soon as the user exits from the front end, the locked_user is updated to null.
We've experiencing a strange behaviour in our system where one user exits from front end and at the same time(previous transaction is not committed) the same user ID opens the same application in another session, but the session session doesn't gets hanged(waiting for the lock to be released) and tries to update the same row which was locked by first user's session. We come to know this thing when the trigger on the table gets fired in both sessoins.
Now I want to know if there is any locking machanism in Oracle where the same row can be updated in 2 different sessons one after another when the first session has not committed its changes?
Thanks
Deepak

And obviously no two sessions can update the same record at the same time
Yes I know that and I tried the same thing by myself on 2 different sql sessions which is not happening, but this is happening when the same is being done from front end(Power Builder based application).
Just wanted to check is there any possibility where this can be possible?
Thanks
Deepak

Global Address List for multiple people with same name?

When writing a new email, I want to add a name from the global address list of my microsoft exchange Contacts group. I select the blue plus button and type in the name. If there is more than one person in my company with the same name, both people will show up. However, Mail is not letting me see the details of either of the two people so I don't know which one is the right one.
However, if I start from Contacts, Groups, Exchange and type in that person's name, when I select a name, a second screen will show up with the details (email address, title, etc) of the person. That way, I know which one is the correct person who I want to email. Why can't I do this directly from Mail? If I need to send an email to multiple people from the GAL, I don't want to have to search for them via Contacts.
Thanks!

I don't know the exact and complete specification of your intended schema...
anyway, from what I can see in your post, I assume that
<deed>
    <deed_type>
        <name>Quit Claim</name>
        <value>Sheriff</name>
    </deed_type>
    <deed_type>
        <name>sheriff's deed</name>
        <value>Sheriff</value>
    </deed_type>
    <deed_type>
        <name>Warranty</name>
        <value>W</name>
    </deed_type>
</deed>would be the "proper" way to go...
which makes your "deed_type" a complexType, including a sequence of two kinds of xs:string elements : "name" and "value"

Creating 2 same forms in different application raise error?

Hi all,
I made a copy of a form in System Administrator -> Forms and the bad thing here is that they have the same name but different applications. After that in few minutes i couldn't log in the EBS. Is this the reason or something else?
version: 11.1.0.7.0
Thanks in advance.

Solved! It was because there was not enough space on the server.
Regards,
Alexander.

Multiple people with same number???

OK i have another problem that i need some sort of system for and I'm looking for suggestions from all of you. What do you guys do for multiple people with the same phone #. For example i have contact info for my aunt, uncle and cousins that all have the same home #. I have multi entry's because i want their birthday info in cal plus their cell phones. But I hate the fact that i have to scroll Thu 4 people with one # and I'm not sure how it picks who to display when someone from the home # calls me. I guess it isn't a huge problem but thought i would throw it out to see what others do. Feedback....
CC

I have a couple of contacts that share a phone number. Pretty much the same reasons as yours. When I get a call from the shared number, then it will say "John Doe or Mary Doe calling" Or some thing like that.
I don't think there is any way around scrolling through each contact since they all have distinct info and are seen as separate

Need to package multiple copies of same form in a single document

Hi,
I used Livecycle to creat an interactive form. I now need to create a single pdf document that has multiple copies (about 30) of the same form. Help!
Thanks in advance.
Margaret

Hello Margaret,
I have been struggling a lot to develop and interactive form using LIvecycle. i.e., a form that is pre-populated with data and then user can add more data and then the form can be saved.
I saw that you have mentioned developing an Interactive form. could you please send me a sample or help me with the same?
Thanks and Regards
Nanda

How to check-in multiple files with same name having different revision num

Hi
Can anyone please tell me, how to check-in multiple files with the same name with different revision number using RIDC API.
For eg:
First I will check-in a file(TestFile.txt) into a content server with revision number 1 using RIDC API in ADF application. Then after some time, will modify the same file(TestFile.txt) and check-in again. I tried to check-in same file multiple times, however first time its checking-in correctly into server showing revision as 1, while checking-in same file again, its not giving any errror message, and also its not reflecting in server. Only one file(TestFile.txt) is reflecting in server.
How to implement this functinality using RIDC API? Any suggestions would be helpful.
Regards
Raj
Edited by: 887680 on Mar 6, 2013 10:48 AM

Hi Srinath
Thanks for your response. Its not cloning, its like check-in file first, then check-out the file and do some editing and then again upload the same file with different revision number using RIDC. I got the solution now.
Regards
Raj

Multiple monitors showing same video in different rooms

I would like to upgrade the video technology in some patient exam rooms. Is there a way to set up multiple monitors connected to the same PC or Laptop - to run the same video loop?

Hi,
As HiLogics says, it will work with video card with more than one DVI ports
Watch set of videos here to experience the fix:
https://www.youtube.com/watch?v=ZkbaXkMQrIM
To Configure Dual Monitor , please look at this link:
http://www.wikihow.com/Set-Up-Dual-Monitors
Setup 3 monitors:
http://www.tomshardware.com/faq/id-1839185/set-triple-monitors.html
Hope this will give you some idea to setup multiple monitors with same image.
Binu Kumar - MCP, MCITP, MCTS , MBA - IT , Director Aarbin Technology Pvt Ltd - Please remember to mark the replies as answers if they help and unmark them if they provide no help.

ARD won't save multiple computers with same IP and different port!

I'm trying to access multiple computers over the internet behind a firewall with port forwarding.
I can access each computer, but ARD won't save the IP address and port (in IP Address column of ARD 3.1) of multiple computers with the same IP address. It will only save ONE. I've tried 'add by address', adding a list for each computer or adding a list for all those computers. Nothing has worked. ARD will actually change the first computer's IP address to 0.0.0.0
Example: Static IP address
Computer 1 xx.xxx.xxx.xxx:51 (public port 51 is forwarded to port 5900 on computer 1)
Computer 2 xx.xxx.xxx.xxx:52 (public port 52 is forwarded to port 5900 on computer 2)
Computer 3 xx.xxx.xxx.xxx:53 (public port 53 is forwarded to port 5900 on computer 3)
Has Apple really overlooked this or am I missing something? Isn't this how most people would remotely manage multiple Macs offsite?
Thanks

ARD cannot do this as you're asking. If your
workstations get their addresses from an NAT device
rather than being "real", the ports also need to be
forwarded in the router to the workstation's internal
IP address. ARD uses port 3283 for the reporting and
updating function, so if your Macs are getting their
IP addresses through NAT, since you can only forward
a port to a single workstation, you can only get
reports, push package/files to etc. for a single
workstation.
ARD uses the VNC protocol for observation and
control, though, and there are a range of IP
addresses for that protocol, starting with 5900. ARD
uses 5900 by default, so that port would be forwarded
to the first workstation. You would, I believe, need
to install VNC servers on the systems (since the ARD
client cannot listen on any port other than 5900
while VNC servers can be set for other ports such as
5901, 5902, etc. You would then forward 5901 to the
second workstation (and on to 5902, 5903, etc.). You
can then use the following information:
Remote Desktop 2: How to specify a port number
for a VNC client
to connect.
The only other options are: 1) to run the ARD
administrator on a workstation on the network, and
then take control of that system from outside, either
via VNC or another copy of ARD, or 2) set up a
virtual private network (VPN) so that when you
connect from outside, your admin system is officially
part of the local network.
Hope this helps.
That definitely helps. I have ARD installed on my MBP and on a workstation on the LAN. I have used ARD from the MBP to control ARD on a workstation on the local network, but it can get a little tricky. I already have VNC setup on all the workstations. I used to use COTVNC prior to purchasing ARD 3.1.
I guess what I'm really asking is...
How do I add a list of workstations and save the settings (same IP address for each workstation with different ports?) to control/VNC via ARD?
I simply want a list that shows each workstation, so I can control/VNC them using ARD offsite.
Name: Computer 1 IP Address: 123.123.123.123:5901
Name: Computer 2 IP Address: 123.123.123.123:5902
Name: Computer 3 IP Address: 123.123.123.123:5903
I don't want to have to manually type in the IP address into ARD every time.
Will ARD simply not add another computer to the list if it has the same IP address but different port number as a computer already on the list? I haven't been able to find a way to make ARD do this.

Multiple users accessing same events

Good Afternoon, i wondered if anyone could assist me. I have described what is going on and have a few questins which i have added in bold.
We are a school in the UK running three Apple suites with a mixture of iMacs and macbooks.
The scenario: We have local users accessing some video footage to create a trailer and i would like to find the best method for this.
The Problem: We opted to use local users rather than network users as i believe imported video events are stored locally. Is this correct?
Based on the previous problem i have created two users, User1 & User2. If User1 imports the event then User2 cant see this and would like to work on the same event, then they have to import the event again. Is there anyway that User1 & User 2 could access the same event without doubling it up?
The problem does change slightly that if i use a networked user, and run iMovie then they can see the events on the local hdd. This only happens on certain machines. Any ideas why this would happen?
If anyone can help in anyway it would be much appreciated.
Thanks

The Problem: We opted to use local users rather than network users as i believe imported video events are stored locally. Is this correct?
Yes, the are stored locally, I don't know if Network users do anything more than authenticate over the network then use the local hard drive anyway. That depends on whether or not your users are setup with Network Home drives or are Mobile users that use the local hard drive instead. You might be able to find out from your SysAdmins whether or not Home folders are on a central server of some kind.
Network users authenticate and have a network home drives.
Is there anyway that User1 & User 2 could access the same event without doubling it up?
It seems like there would be a benefit to using an external Mac HD in this case as the permissions on that folder could easily be ignored. Then any user on that Mac will be able to see the iMovie Projects and Events saved onto that external HD and use them without doubling up the Events folder material. Unfortunately I don't think you can force iMovie to use a different folder for the Movies folder on an internal Hard drive. So an external HD might provide an easy workaround if that's possible. And better yet, it makes it all portable BETWEEN Macs if you need to setup on a different machine for some reason.
Thanks, thats was what i wanted to know. Although I dont think the department will be too keep on buying a minimum of 30 external hdd.
This only happens on certain machines. Any ideas why this would happen?
I don't want to blame this on how the machines are configured, but it may be the network users are seeing a Network Home folder in some cases when they are logged in, and in other cases they are seeing the local home folder on the internal Mac HD. I'm just guessing at this point. But it should be consistent across all the machines depending on if the network users is a Network Home user or a Mobile user.
I have double checked and all users are seeing their network home and no local version.
I just wondered if myabe an older version of iMovie(09) allowed the users to see all events even as local users or network. - bizarre really

Multiple people access same form over different sessions?

Similar Messages

Maybe you are looking for