My InDesign document has two page 1s and I can't get the page numbers to work. Help!
My InDesign document has two page 1s and I can't get the page numbers to work. Help! How do I fix this?
Do you mean the first section is starting at page one?
And the second one now is starting at page two?
So I would ask why you would need sections at all?
Did you set the controls for Automatic Page Numbering?
If you select the particular page where section two is starting in the Pages Panel, you could untick the Start Section option in the numbering and section dialog. That would remove the section. You cannot do that with the very first section, but you should set the first section to Automatic Page Numbering if you ever want to use your document with an inDesign book file.
Uwe
Similar Messages
-
I just purchased Lion OS and I can't get the mouse gestures to work on my MacBook.
This is the iMac forum- you might get a quicker response in MacBook area. But I assume you have tried the settings in the Sytem Preferences for Trackpad.
-
I have an Iphone 4 and I can't get the bluetooth to work in my 2009 Nissan 370z. Any suggestions? Thank you
Was your airport express purchased recently?
Was it new or used?
Has it been set to extend an existing network?
You can always try resetting the airport express by unplugging it and pressing the little button on the underside with a stretched out paperclip for roughly 30-45 seconds then try plugging it in again.
Once you've reset the airport express, you'll want to walk through the setup process from a Mac or Windows computer using Apple's Airport Setup Utility.
For OS X
http://support.apple.com/downloads/AirPort_Utility_5_4_1
For Windows
http://support.apple.com/kb/DL840 -
I have recently upgrades to Mountain Lion and I can not get the calendar utility to come alive. Icon appears in the tast bar but the application does not launch or appear to be any where else. Any suggestion?
Did you look in the Applications folder for Calendar? If it is there, remove the item that is in the Dock and replace it by dragging the Calendar application to the Dock.
If it is not there, did you have iCal located somewhere other than the Applications folder when you upgraded? -
I've just installed Firefox onto my Mac and I'm finding that I can't eject the disk from my desktop. I've moved Firefox into the Applications and tried going to "File" and ejecting from there, but I get the message that "Firefox couldn't eject because Firefox was using it."
I have also tried shutting down everything, replacing Firefox in the applications and clicking on the icon with a white circle and cross, but I get the message "A copy of Firefox is already open. Only one copy of Firefox can be open at a time."
I'm basically stuck. Any help would be appreciated, please.See:
* http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X
* https://support.mozilla.com/kb/Installing+Firefox+on+Mac -
Updated two computers and now can not get the serial number to work
can not get Production Premium Suite serial number to work after up dating both of my computers. get invalid serial number error. both are running OS X 10.9.4.
I am using version CS6, don't know support number. Did not deactivate because drive failed. put in new drive and it will not accept serial number. Same Mac Pro desk top just new hard drive.
JIM PARKER
<Removed by Moderator> -
I can't seam to get the migration to work between my g4 running 10.4 with all the upgrades including migration assistant 1.0.6 to talk to my new Pro.
The pro tells me to upgrade the g4's migration assistant and that has been done as much as I can find.Hi 'baltwo'
Thank you for your link, I already had been on this particular website this afternoon. they only discuss problems in the application and nothing about how the MS Office application installation does disturb Mac OS.
Or have I missed a special comment there?
In any case many thanks, trioloGo -
For the past two days I cannot access my kindle books on my ipad. I might be able to get one page of a book to appear but then it freezes and I can't turn the page. I tried turning my ipad completely off and then on again. Any ideas to fix this?
Start by doing a reset ,you will not lose any data
hold home /sleep button until Apple logo appears ignore off slider
first try closing Kindle App on iPad -
I had Partitioned my Macintosh HD, so now it has two, Macintosh HD and Macinyosh HD 2, but the question is, my computer has an minor update OS X 10.8.2 to 10.8.3, i wan to move all the files as BACKUP to the Macintosh HD 2, but how? Thanks.
As long as the Macintosh HD 2 partition is just the same size as Macintosh HD to avoid problems in the future, then you can clone one to the other using Carbon Copy Cloner, then use Disk Utility to Repair Permissions on both and if you need too you can hold the option key down while booting and select the #2 partition to boot from.
However you need to set CCC to maintain a pure clone, or else by default it will save the changes between clone updates and overfill your #2 partition.
Also the #2 is merely a bootable backup alternative and for retrieving the rarely occuring deleted files, don't use #2 for storage or anything you want to save pernamently.
In addition you also need external clones and backups, as the machine may fail or get lost etc.,
Most commonly used backup methods -
i cannot access my mobileme on my imac it tells me that my browser safari and mozila can't open the page. However on my macbook it all works (in the same room. I have rebooted and rebooted. I have enough memory. Any help?
Hi Hawaiian_Starman,
Thank you for the suggestion.
I ran the first aid in the Keychain both for verification and for repair and both immediately returned with "no problems found".
As for the certificate, according the web administrator nothing had changed for the certificates.
even on the windows laptop I also get the certificate as being expired, but by simply accepting that I still have access.
I had a pop up every time that alerted me to the certificate issue, but whether I "continued" or not that still did not matter.
Yesterday, in an effort to find a solution, I went into the "details" and entered to trust this website.
Now that certificate issue does not pop up anymore. But I do not know how to reverse that either.
I have the feeling indeed it has something to do with a certificate, but how is the question. -
I want to add a CD to my IPod Classic, the CD has been loaded into my library but my iPod is not showing on i-tunes and I can't get the CD onto my iPod.
Well if your iPod is not appearing under Devices in iTunes when you have it plugged into a high powered USB 2.0 port, then that would explain why this newly loaded CD has not synced to it yet.
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock -
Hi my name Abukar I had an old apple ID and I had problem with signing it so I decided to make a new apple ID with a new email address, so how can I link with two apple IDs and how can I get back all my previous apps that I purchased before, I cloud stuff
It is not possible to do that.
Allan -
great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp 3.0.4.
Here's what I get:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0 mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:11:24:7d:e7:1e
media: autoselect (none) status: inactive
supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::211:24ff:fe28:2e71%en1 prefixlen 64 scopeid 0x5
inet 169.254.115.141 netmask 0xffff0000 broadcast 169.254.255.255
ether 00:11:24:28:2e:71
media: autoselect status: active
supported media: autoselect
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
lladdr 00:11:24:ff:fe:7d:e7:1e
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex> -
I bought two HD movies and I can not get either one of them to play...help please?
What have you tried?
What happened?
Error message?
Any info? -
I have atempted to gift a song to someone. I have been charged for it but it was not received. I tried to re-gift it and was charges a second time but the recipient still has not received it. How can I get the song to her or my money back?
First, have the recipient check any anti-spam filters that may be present on her email account or in any email application to make sure that messages from Apple aren't being blocked. If she is sure that is not the case, go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.
Maybe you are looking for
-
Retrieve Material group item in Purchase Order.
Hi all, I would need to retrieve the material group from item in Purchase order to compare in Step condition in workflow. I have a copy of WS14000075. The container from this WF hasn't this field, at least that I know. How can to retrieve this value
-
Copy and Paste from Safari to MS Word Text Form Field adds a trailing space
I know this is just a minor issue, but an inconvenience for me nonetheless. When I go to the same page and copy and paste the same text from Firefox, the trailing space is not added. What I find puzzling is that when I paste the same copied text into
-
Does a Time Machine backup capture unsaved Word Documents? I am looking for a Word Document that I am guessing I deleted though I think it was open when I was doing a backup.
-
DIAdem 9.1 und DIAdem 3
Hallo miteinander Kann ich 2 DIAdems (9.1 & 3.x) auf demselben Rechner installieren? Grund: Altes Programm läuft mit Aut nur auf altem DIAdem 3.x (Konvertieren auf VBS zu umständlich) Danke für Eure Antworten.
-
I have process of the transfering between plants. I have processes of transfer between plants. There is some problem in the determination of multilevel run with the option of parallel processing? The idea is to gain in performance Thanks,