My MacBook pro won't turn on, even though it's fully charged. I can hear a disk chime but nothing on the display. Help?

I'm having an issue with turning my MacBook pro on. It's fully charged and when I press the power button I hear a disk chime but nothing happens on the display. Can anyone help please?

Tried connecting the cable?  Still won't start?
If you are still under warranty and/or have AC, call them & let them deal w/it.
OOW:  Take the MBP to your local AS or an AASP.  Diagnostic testing is FREE!
http://support.apple.com/kb/TS1365 Intel-Based Apple Portables: Troubleshooting a computer that will not power on

Similar Messages

  • This morning, my macbook pro won't turn on even though the battery is charged and power cord is working. it worked fine last night. what can i do?

    This morning, my macbook pro laptop won't turn on even though the battery is charged and power cord is working. it worked fine last night. what can i do?

    Try the suggestions in this support article:
    http://support.apple.com/kb/TS1367
    Ciao.

  • MacBook Pro won't turn on even with green light on charger

    i have a 2010 MacBook Pro. The battery has been permanently dead for years but it still turned on as long as I had the charger connected. Eventually the charger stopped working so I bought a new one. The light is green on the charger but the MacBook won't turn on now. I tried that reset thing as well as opening up the bottom and disconnecting and reconnecting the battery and that didn't worn either. I pressed the button on the side and there's green flashing lights so its definitely getting power it just won't turn on. I don't know what else to do at this point.

    icychill69 wrote:
    I tried that reset thing
    Was that 'reset thing' a SMC reset?
    http://support.apple.com/en-us/HT201295
    If so, a new battery may be the cure but bring the MBP to an Apple store genius bar for a definitive evaluation first.
    Ciao.

  • My Macbook Pro won't turn on even though the batt seems fully charged?

    My Macbook seems fully charged but nothing happens when I press the on button. All the lights on the battery are illuminated...
    Any help would be appreciated!
    Cheers,
    ET

    Try the suggestions in this support article:
    http://support.apple.com/kb/TS1367
    Ciao.

  • My iPad will not turn on even though it is fully charged. Any suggestions?

    I was using my iPad earlier this morning without a problem.  I plugged it in to charge because the battery was running low, and I left it alone to charge.  I came back to unplug it and use it, but it will not even turn on even though I checked it maybe an hour ago to find that its progress was at 85 percent.  How do I turn it back on at this point?  I press the power button, the center button, and nothing happens.  Please help, thank you!

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • My relatives 2009 Macbook Pro won't turn on and isn't taking a charge.

    Holding down the power button has no effect and when the charger is inserted, there is no green or red/orange light. All outlets are functioning and the computer was working as it always had the day before. Help?

    Hi Cygnus and Lyra,
    Thanks for visiting Apple Support Communities.
    If the MacBook Pro doesn't respond when the power button is pressed, or seem to recognize the charger, these troubleshooting steps can help:
    If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
    Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
    Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
    If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
    MacBook Pro: How to remove or install memory
    MacBook: How to remove or install memory
    Mac Pro: How to remove or install memory
    Mac mini: How to remove or install memory
    iMac (27-inch, Late 2012): Installing or replacing memory
    iMac: How to remove or install memory
    Reset the SMC.
    If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
    Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    You can find these steps here:
    Troubleshooting: My computer won't turn on - Apple Support
    All the best,
    Jeremy

  • My brand new Macbook Pro will not turn on even though it says it is charged

    I just got my Macbook Pro 2 days ago. It was working just fine yesterday but now it willl not turn on. I plugged it in and the green light is lit up but it will still not turn on. Help!

    I suggest you take it in for repair/replacement.
    Barry

  • Vision M - 30 GB, won't turn on even though it's fully char

    When I hook up my mp3 player to my pc via usb it tells me that the battery is really low (red single line in bar is displayed on the top right hand side), I had it connect for a half hour and there was no change in charge status.
    Thinking it may have been the wire or something I tried the wall charger. When I hooked it up to the wall charger the player indicates that it's fully charged (full green bar with an icon in the middle of the green).
    So I'm not sure what the deal is... but now it won't turn on. When I try there is a quick flash of blue where the switch is but other than that no activity from my Vision M.
    Help please?

    hello to everyone, i seem to have a similar problem.. - bought my zen vision: m 5 months ago- used it for 4 months perfectly- then havent touched it for a month- when i took it back, the battery was empty, so tried to charge it all day long throuh my pc with a usb cable- it blinked all day long blue, and the batter icon indicated a blinking flash which meant it was being charged- but somehow the battery icon always stood red, and immediatley went off when i detached it from the cable- is the battery dead is it so cheap what can i do, please help me best regards, goktug / t rkiye / istanbul

  • Help - MacBook Pro won't turn on

    Help - my macbook pro will not turn on even though it is plugged in. Holding down the power button is ineffective. The power cord has the green "charged" light, but when I plugged it in, it wasn't charged and never did charge (the light never was orange). The computer worked perfectly this morning.

    Will it not turn on at all or do you just get a gray screen?
    If a gray screen, look at this:
    https://discussions.apple.com/docs/DOC-5282
    If it does not turn on at all, try a SMC reset:
    http://support.apple.com/kb/ht3964
    If the reset fails to bring life to the MBP, make an appointment at an Apple store genius bar for a free evaluation.
    Ciao.

  • My macbook pro won't turn on without any reason?

    my macbook pro won't turn on without any reason, is there any solution in this case?

    You need to hit the "reply" button on post to whom your responding too, it's hard to tell if your responding to me or someone else.
    small button on the side of the computer and didn't lightting up( no reponse at all). is their any problems do think with the battery?
    Usually if your battery is dead because it wasn't charged you can do the SMC Reset and then check the Magsafe if it's connected and showing the orange light, then let the battery charge up.
    Once the battery charges up, the computer will boot normally and then you have to reset the PRAM, time, date etc.
    https://support.apple.com/kb/TS1365
    Magsafe issues: https://support.apple.com/kb/TS1713   https://support.apple.com/kb/TS4127
    *PRAM Reset  http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html
    What's store in PRAM   https://support.apple.com/kb/HT1242
    Hardware Test
    https://support.apple.com/kb/ht1509

  • My macbook pro won't turn on and it is plugged into the charger, the light doesn't even turn a color?

    my macbook pro won't turn on and it is plugged into the charger, the light doesn't even turn a color?

    Might be a problem with the adapter.
    Help here >  Apple Portables: Troubleshooting MagSafe adapters

  • My MacBook Pro won't turn on, only a white screen with spinning circle, I've only had it a few weeks! Any ideas what is going on?

    My MacBook Pro won't turn on, only a white screen with spinning circle, I've only had it a few weeks! Any ideas what is going on?

    Mac OS X: Gray screen appears during startup 

  • My MacBook pro won't turn on all the way gets to the apple with the spinning wheel underneath and that's all I need help asap

    My MacBook pro won't turn on it just gets 2 the spinning wheel and keeps spinning

    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
    If this doesn't work then you will need to erase the drive and install Snow Leopard from scratch:
    Erase and Install Snow Leopard
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. When completed quit DU and complete the Snow Leopard installation.

  • My MacBook Pro won't turn on although the battery life is showing full

    My MacBook Pro won't turn on although my battery life is showing full ,

    Go step by step and test.
    http://support.apple.com/kb/TS1365
    Note: Steps 5 and 6
    Step 5
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • My MacBook Pro won't turn on. What keys do I use toed last week.

    My MacBook Pro won't turn on. What are the keys to reboot?  This happened last week.

    http://support.apple.com/kb/HT3964 if you haven't replaced the PRAM battery in the last 4 years.
    If you have:
    http://support.apple.com/kb/HT1379
    Note, the PRAM battery is not the normal replaceable battery for power.  It is the equivalent of the PC CMOS battery.

Maybe you are looking for

  • OEL 5.4 gives error

    I have installed OEL5.4 and database 10.2.0.4 the package i installed and not installed are: - Is not Installed: elfutils-libelf-devel-static-0.137-3.el5.x86_64.rpm \ elfutils-libelf-devel-0.137-3.el5.x86_64.rpm \ - Is installed libgomp-4.4.0-6.el5.x

  • Math for looking up and down in 3d world

    Hello, I have a float called "heading" which is how much the player has turned (around the y axis) and a float called "verticalLook" which is how much the player has started to turn his head upward towards the sky. I call gl.glRotatef(360.0f - headin

  • Failed hostname verification check - even when disabled

    Hello Experts, I'm using WLS 923 configured as Admin Server that controls two Managed Servers. When i go to "Environment ---> Machines ---> Managed Machine ---> Monitoring ---> Node Manager Status It says: Status - Inactive failed hostname verificati

  • How to arrange photos acoording to time of exposed, taken by 3 photographers dumped in one file ?

    How to arrange photos acoording to time of exposed, taken by 3 photographers dumped in one file ?

  • MM03 report assignment in query

    Dear Experts, I am entering MM03 transaction as reprt assignment in a query. When i execute the report and double click a line, it takes me to MM03 but with empty line item. How can i fix that? is there any user parameter for that? I know there are f